BraunAbility / The Braun Corporation

627 West 11th, Box 310
Winamac, Indiana 46996
United States
Telephone: 800-843-5438 or 574-946-6153.
Fax: 574-946-4670.
Web: http://www.braunability.com.

Discontinued products manufactured by BraunAbility / The Braun Corporation (listed alphabetically)

1. AUTOMATIC GEAR SELECTOR (POWER GEARSHIFT)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Automatic gear selector is option/on console between front seats (purchased separately). Gear selector is positioned in convenient position for driver and operated with toggle switch. Models for Ford, Chevrolet and Dodge vehicles.

2. BRAUN ALUMINUM TELESCOPING 6 FOOT RAMP.

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telescoping ramp 6 feet long has 2 channels (tracks) that are set 4 feet apart. Mounts on either rear or side door. Easy to transport. Light weight aluminum construction. Stores either in horizontal or vertical position inside van. Wheel guide for safety.

3. BRAUN BUILT AUTOMATIC DOOR OPERATORS

   --- DISCONTINUED. (Verified 07/2009) RETAINED IN DATABASE FOR REFERENCE. --- Automatic van door control. Models to fit both swing doors and sliding van door to be used with automatic lifts. Swing door model operates with screw jack mechanism. 1 door operator attached to each door. Door operators work in sequence to close swing door properly. Slide operator attached to van side allows sliding door to close properly. Both operate on activation of a control switch.

4. BRAUN BUS BACKUP SYSTEM FOR EXTERNAL LIFTS (MODELS 11789A, 11790A, & 11791A)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back up pump fits on to van lift inconspicuously. Handle fits into socket for manual operation of lift. Allows lift to be lowered or raised by companion in case of electrical failure. Stores on lift inside van.

5. BRAUN ELECTRIC TURN SIGNAL.

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electronic directional signal with three push button switches on centre driving console (see separate entry) for right hand operation of directional signal. Third push button is for cancellation of turn. Buttons can be located to accommodate driver limitations. Can be programmed to blink a certain number of times when activated.

6. BRAUN HORIZONTAL STEERING COLUMN (MODEL 11927A)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Motorized steering column moves horizontally and vertically to adjust to needs of driver. Accommodates reach limitations of drivers. Horizontal elevation facilitates entering and leaving vehicle. Low effort steering available separately. Will accommodate various spinners and other equipment, see separate entries.

7. BRAUN LOW EFFORT STEERING (MODEL 11928A)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Low effort steering reduces the effort required to steer the vehicle by almost half. Unit is for vehicles with factory power steering. Unit replaces factory power steering unit valve.

8. BRAUN RAISED DOOR KIT.

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Raised van doors (along with raised van tops) facilitates accommodating drivers or passengers who are very tall or who have little or no movement of the cervical area. Kits for slide, rear and front door with both 12 and 24 inch height for front doors. Kits $167.00 to $80.00, installed prices are $767.00 to $470.00 respectively. Models for Ford, Chevrolet and Dodge vans. Fiberglass construction.

9. BRAUN RAISED ROOF.

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Raised van top, necessary for drivers or passengers who are very tall or who have little or no movement of the cervical area. This facilitates entry into and movement within the van. Various models fit Chevrolet, Dodge and Ford vans. Available either in 12 inches or 24 inches height. Also a model for Dodge van with 109 inch wheel base or 138 inch wheel base Ford vehicle. Additional $200.00 charge for ship- out from factory. Usually part of van conversion. Fiberglass construction.

10. BRAUN SLIDE BAR TIE DOWN RAIL MOUNT (MODEL 12346A) & FLOOR MOUNT (MODEL 12345A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint tie down system for bus or van. Base of restraint mounts on floor of vehicle or rail of seat (two different models). Pins of restraint hook around rear wheels of wheelchair to restrict movement. Pins attach by attendant or companion moving a single lever. Accommodates most standard or electric wheelchairs. Includes lap belt and hardware. Heavy gauge steel. Meets Federal motor vehicles safety standard 209.

11. BRAUN TELESCOPING WHEELCHAIR RAMPS

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Braun telescoping wheelchair ramps are fabricated of highstrength aluminum. Lightweight. 65 inches long when retracted, 9 inches wide, and 98 inches long when extended. May be used at side or rear door of most vans.

12. BRAUN TRANSIT TOP.

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Raised van top for transit vehicle, facilitates accommodating passengers who are very tall or who have little or no movement of the cervical area. Models to fit Ford and Dodge vehicles. Additional charge of $200.00 for ship out from factory. Fiberglass construction. Comes with roll cage and liner made of pipe to prevent collapse of roof. Liner can be purchased separately at $150.00.

13. BRAUN VAN CONVERSION.

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Basic price includes Braun automatic lift, door opener and closer, raised top, raised door, hand controls and tie downs (see separate entries). Exact cost based on client needs and specifications. Systems available for high level quadriplegics. Braun provides exclusive " gravity down" feature to save battery drain and prevent "jacking" of vehicle. Semi automatic lifts need only 10 pounds of force to fold for storage. Chevrolet vans in stock. Van conversions done at Braun facilities in Winamac, IN, Huntington Beach, CA or Clearwater, FL. Local network of distributor nationwide provide maintenance and local service.

14. BRAUN WHEELCHAIR RAMPS

    --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- Folding wheelchair ramp measures 30 inches by 80 inches and is operated by attendant or companion. Side or rear installation with 3 bolts. 30 inch width conveniently accommodates most standard wheelchairs. Side rails (at 90 degree angle to ramp) minimize chair rolling of ramp. Metal grating construction is non skid and cleans easily. Center step cleats provide support and assist attendant in pushing wheelchair up ramp. Minimal obstruction of vision when folded vertically in vehicle. Stepwell or flat floor threshold.

15. BUS FLAT FLOOR LIFTS

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lift for buses can be installed in either front or rear of vehicle. Bus must have door width of 36 inches. Platform of welded steel lift is 30 inches wide and 44 inches long. Operated by electric motor driven hydraulic pump. System utilizes gravity in down operation. Lift has maximum load capacity of 750 pounds. Installation requires no modification to body or frame of bus. Vertically stowed lift extends into bus about 12 inches. Easily maintained. Easy access for routine inspections. Safety stops on front and back of lift. Lift can be used in temperature extremes. Fully automatic. Electric actuator can be removed in event of power failure. Manual override system available as option. Controls may be mounted conveniently, hand held, or a combination of both. Roller chain and similar parts enclosed to protect passenger and clothing.

16. CENTER DRIVING CONSOLE (MODEL 11935A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Auxiliary driving system is relocated to area between front seats of vehicle. Rectangular box has toggle switches or push buttons for auxiliary controls (lights, heat, directional signals, horn, etc.). Accommodates at least 17 functions. Automatic gear shift is an option purchased separately. (Operates with toggle switch.) Center driving console locates dash controls at convenient location for driver.

17. DETACHABLE FRONT SEAT BASE.

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Detachable pedestal seat base attaches to factory installed seat and allows removal of seat for wheelchair to occupy driver's position. Seat bolts to floor of vehicle and to factory installed seat. Allows vehicle to be driven by able bodied driver. Detachable seat stores in rear of vehicle.

18. DRIVER'S ARM TYPE ELECTRIC TIE DOWN (MODEL 77141A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Powered wheelchair restraint wire. Steel tie down system provides restraint for wheelchair from driver's right. Device attaches to wheelchair frame under right arm. Base of restraint mounts to floor of vehicle. Provides driving stability and restricts rolling and tipping of wheelchair. Includes occupant restraint belt.

19. DUAL PARALLEL ARM BUS LIFT (MODEL L900 SERIES)

    --- DISCONTINUED. (Verified 01/2008)RETAINED IN DATABASE FOR REFERENCE. --- Contact manufacturer directly for product details.

20. FREE SPIRIT

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Fully equipped and wheelchair accessible mini motorhome. Many options such as a wheelchair lift are available to meet the individual needs of the consumer.

21. FRONT POST SWING A WAY

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Fully automatic rotary lift moves platform from the van interior to the ground. Platform size: 29 3/4 inches wide by 35 inches long. Fits full size Ford and Chevy slide door vans. Provides complete access to the vehicle's interior. Standard lift controls are adjacent to handrail. Positive front and rear safety stops. Standard back-up system provided. Non-skid platform surface. Not available for Mini-Vans or Full Size Dodge Slide Door Vans.

22. FULLY AUTOMATIC COMMERCIAL WHEELCHAIR LIFT (MODEL L911ARS)

    --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. ---

23. HANDI JOHN

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Portable accessible restroom. Non skid floor and ramp entrance. Wide door, two 24 inch grab bars. 45 gallon tank. Dimensions: 87 inches high by 61 inches wide by 61 inches deep. Fiberglass construction.

24. LIFT A WAY WHEELCHAIR LIFT (MODELS L4OU & L41U)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Platform van lift of welded steel, semi automatic folds manually for storage when not in use. Fits side or rear of van. Control box may be mounted at various locations within the vehicle or hand held. Lift is 33 inches wide and 44 inches long. Operates from van battery. Attendant must be exert about 15 pounds of force to fold lift. Lift capacity 750 pounds. Spring loaded safety stop on front of lift. Optional hand rail for passenger convenience and safety. Ball bearings provide, greaseless, maintenance free operation. Box frame provide rigid construction without relying on vehicle side wall strength. Up to 62 inches head clearance. Fits van and commercial vehicles.

25. LOW EFFORT BRAKE (MODEL 11929A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Sensitized low effort brake reduces capabilities need to operate braking function of vehicle. Modification is made on factory installed power brakes. Unit adds no visible components to vehicle. Backup system purchased separately.

26. OVER THE CENTER TIE DOWN (MODELS 11312A & 10621A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint tiedown system locks both sides of wheelchair to floor. Wells for restraints fit into floor of vehicle. Restraint is attached into well and attached frame between front and back wheels of chair. Includes occupant restraint belt.

27. OVERHEAD TRANSFER BAR

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Grab bar for persons who need assistance in transferring from wheelchair to car or from wheelchair to seat in van. Attaches to frame of vehicle and provides hand hold where needed to assist in sliding from point to point.

28. POWER EMERGENCY BRAKE

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Power emergency brake operates brake system with toggle switch. For Ford, Chevrolet or Dodge vehicles.

29. REAR WHEEL TIE DOWN (MODEL 11805A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair restraint. Two high strength quick release push button pins hold rear wheels of chair in place. Constructed of heavy gauge steel. Base of system mounts on floor in any convenient position. May be used in combination with Braun 2 point track Belt System to provide 4 point wheelchair securement. System may be adapted to special applications or used as a single tiedown. Accommodates all wheelchairs. Includes 108 inch occupant restraint belts. Meets standards established by FMVSS ## 209, applicable to commercial uses.

30. ROLL IN SHOWER

    --- DISCONTINUED. (Verified 2/1998) RETAINED IN DATABASE FOR REFERENCE. --- Fiberglass shower stall, 4 1/2 feet square, entry ramp and exit lip for water retention. Molded shelf. Installed in four pieces: base and three wall panels. Single lever water controls, hand shower. Options: barrier free shower door, Safetymix shower head, wall mounted shower seat, grab bars.

31. SEMI-AUTOMATIC COMMERCIAL WHEELCHAIR LIFT (MODEL L25ULTRA III)

    --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. ---

32. SERVO HAND CONTROL PUSH / PULL

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Hand control system operates with push/pull lever on center driving console (see separate entry). Pull for brake; push for gas. Single control lever on right or driver is approximately 3 to 4 inches long and contoured for comfort.

33. STEERING COLUMN EXTENSION.

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Steering column extension, 12 different models depending on length of extension (4 or 6 inches) and make of US vehicle. Extends steering column immediately below steering wheel, at same angle, to bring steering wheel closer to driver. Unit is bolted to steering column, made of aluminum. For wheelchair driver (usually quad) who needs to bring steering wheel closer for good control.

34. STEERING ZERO EFFORT BACKUP (MODEL 11926A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back up system for braun zero effort steering provides steering capabilities in case of engine failure. System activates automatically in case of engine failure. No visible components added to vehicle.

35. TRI-WHEELER (SERIES 4 & EXTENDED MODELS)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Tri-Wheeler, Series 4 and Extended models, is a three-wheeled powered wheelchair alternative designed for indoor or outdoor use. FRAME: Steel frame with ABS plastic chassis. Overall length is 38 inches, overall width is 25 inches. The turning radius is 30 inches. The extended models have a 9-inch body extension. The T1100 series models have a base which must be straddled by the user's legs, with a footrest on both sides of a center "wall." Extended models have a pass-through base to accommodate the legs and small packages. CONTROLS: Solid state circuitry, removable steering tiller with controls placed at center of tiller handle. DRIVE: Chain drive. SEAT: Cushioned upholstered swivel seat. Seat width is 16 inches, seat height is 17 inches, and back height is 24 inches. ARMRESTS: Upholstered armrests swing up for transfer. WHEELS: Wide pneumatic tires for use in all terrain types. POWER: Two 12 volt batteries. SPEEDS: Minimum speed is 0.7 miles per hour (mph); maximum speed is 4.5 mph. OPTIONS: Available options include a powered elevating seat lift with 6 inches of vertical lift, swivel seat, and solid tires. WEIGHT: 203 pounds, including batteries.

36. VAN RAMP.

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Van ramp for wheelchair access, expanded metal ramp, side wheel guides, center step cleats. 3 bolt installation. Stepwell threshold installation on side van door, 3/8 inch spring to counter balance weight for easy operation. 30 by 84 inches. Fold vertically and stores inside door.

37. WEDGE POWER SEAT BASE (MODEL 11306)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Powered driver seat base, wedge shaped base moves 5 inches vertically and 15 inches horizontally to properly position wheelchair occupant for driving and proper visibility. For U.S. made vans. Can be used with regular or custom seat. For drivers who can transfer from wheelchair. Operates with push button switch. Attached to floor of vehicle with 4 bolts. Switch may be hand held or mounted in convenient position. Swivel unit available to facilitate easy transfer from wheelchair to seat ($90.00 plus $60.00 installation).

38. WHEELCHAIR LIFT (L400U SERIES)

    --- DISCONTINUED. (Verified 7/2012) RETAINED IN DATABASE FOR REFERENCE. --- Platform lift with reduced entry angle to facilitate ease of entry. Floor to ground capacity increased to 34.5 inches. Designed to fit the side or rear doors of most domestic and foreign full size and mini vans. Hydraulic pump and optional built in hand pump for emergency backup. No information on dimensions of platform.

39. WHEELCHAIR SWING A WAY LIFT (L800 SERIES)

    --- DISCONTINUED. (Verified 5/2011) RETAINED IN DATABASE FOR REFERENCE. --- Rotary style van lift with double slide tube design for stable ride. Hydraulic pump with built in hand pump and plastic reservoir. Low profile paltform with reduced entry angle to facilitate ease of entry. Three platforms available: standard, extended and front wheel drive. Optional psoer passenger step works in coordination with lift. swing door operators to work with reverse swing lift, power step and six- touch remote control. Accomodates most styles of scooters and wheelchairs. Model L800X mounts on the front post, model L800U mounts on the rear post. Compatible with most full size domestic or foreign, wing and slide-door vans.

40. WHEELCHAIR TRANSPORATION ACCESSORIES

    --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. ---

41. ZERO EFFORT BRAKE (MODEL 11930A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Zero effort brake system reduces effort needed to brake vehicle by approximately 1/3 more than the reduction by low effort brake (see separate listing). Modification is made on factory installed power brake system. Unit adds no visible components to vehicle. Backup system purchased separately.

42. ZERO EFFORT BRAKE BACK UP (MODEL 11930A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Optional backup system for zero effort brake continues to provide safe driving capability in case of engine failure. System activates automatically in case engine fails. For use in vehicles with braun zero or low effort brake system.

43. ZERO EFFORT STEERING (MODEL 11925A)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Zero effort steering reduces the effort need to steer vehicle by up to 70 percent. Replacement valve fits vehicles with factory power steering and replaces factory installed power steering valve. Unit adds no visible components to vehicle. Backup system can be purchased separately.

See BraunAbility / The Braun Corporation products that are currently available.