Handi-Ramp, Inc.510 North Avenue
Libertyville, Illinois 60048
Telephone: 800-876-7267 or 847-680-7700.
Products manufactured by Handi-Ramp, Inc. (listed alphabetically)
ALUMINUM PORTABLE WHEELCHAIR RAMP
The Aluminum Portable Wheelchair Ramp is a folding aluminum ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a non-slip, raised button surface for traction and safety. It folds in the center and has a handle for carrying. OPTIONS: Wheel kit for rolling transport and removable hinge pins allowing the ramp to separate into two sections. DIMENSIONS: Ramps are available in 5, 6, 7, 8, 10, or 12 feet lengths. All ramps are 30 inches wide. Custom dimensions are available. CAPACITY: 750 pounds. Custom capacity is available. WEIGHT: 41 to 89 pounds depending on length.
ALUMINUM SECTIONAL WHEELCHAIR RAMP SYSTEM
The Aluminum Sectional Wheelchair Ramp System is a modular ramp designed to provide building access for wheelchair users. Sections are made from heavy-duty aluminum with a raised-button non-slip surface, and can be assembled into semi-permanent wheelchair access ramps. Because ections are interchangeable, the system can be expanded or reconfigured when needed. Ramps come standard with double bar rails made from galvanized steel with aluminum mounting brackets. OPTIONS: Handrail retro-fit kits for ramps originally purchased without handrails. DIMENSIONS: Sections are 4, 5, 6, or 8 feet long. Standard width is 36 inches. Custom sizes are available. CAPACITY: 750 pounds.
ALUMINUM THRESHOLD RAMP
The Aluminum Threshold Ramp is a threshold RAMP designed to make doorways accessible to individuals who use wheelchairs or scooters. This aluminum ramp has an anti-slip, high traction sandpaper surface. The ramp has mounting holes in its top corners and comes with hardware to secure it to the doorway surface. DIMENSIONS (LxW): 8, 10, 12, 16 or 24 x 32 inches or 16 or 24 x 36 inches. The rise is 0.25 to 0.5, 0.5 to 0.75, 0.75 to 1, 1.5 to 2, or 1.5 to 3 inches depending on length. WEIGHT: 3 to 15 pounds depending on size. CAPACITY: 600 pounds.
BARIATRIC MULTIFOLD PORTABLE RAMP (MODELS BAR536, BAR636, BAR736, & BAR836)
The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (model BAR536), 6 x 3 feet (model BAR636), 7 x 3 feet (model BAR736), or 8 x 3 feet (model BAR836). CAPACITY: 800 pounds. WEIGHT: 50 pounds (model BAR536), 58 pounds (model BAR636), 67 pounds (model BAR736), 76 pounds (model BAR836).
BARIATRIC PANEL RAMP (MODELS BPR348, BPR448, BPR548, & BPR648)
The Bariatric Panel Ramp is a ramp designed to provide wheelchair or scooter access for individuals with mobility disaabilities or spinal cord injury. This ramp consists of three interlocking sections with an additional panel the can be used to increase ramp widths. The outside panel has curbing to keep the wheelchair or scooter in place while in use. The ramp is made of welded aluminum with an anti-slip high- traction surface suitable for all weather conditions, and can accommodate wheelchairs and scooters with various wheel configurations. DIMENSIONS (LxW): Model BPR348 is 3 x 4 feet, model BPR448 is 4 x 4 feet, model BPR548 is 5 x 4 feet, and model BPR648 is 6 x 4 feet. CAPACITY: 800 pounds. WEIGHT: Model BPR348 weighs 24 pounds; model BPR448 weighs 32 pounds; model BPR548 weighs 46 pounds; and model BPR648 weighs 56 pounds.
BARIATRIC THRESHOLD RAMP (MODELS BTR 1636 & BTR 2436)
The Bariatric Threshold Ramp is an accesible threshold designed to make doorways accessible to individuals who use wheelchairs or scooters. This bariatric threshold ramp is made of lightweight aluminum with an anti-slip, high-traction sandpaper surface. It covers a threshold rise of 1.5 to 3 inches (model BTR 1636) or 2 to 4 inches (model BTR 2436), and comes with mounting holes and the hardware needed to secure it to the door molding. DIMENSIONS (LxW): 16 or 24 x 36 inches. CAPACITY: 800 pounds. WEIGHT: 12 pounds (BTR 1636) or 21 pounds (BTR 2436).
BRIDGE THRESHOLD RAMP (MODELS TR1, TR1.5, TR2, & TR3)
The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds.
CONCRETE DECK RAMP SYSTEM
The Concrete Deck Ramp System is a modular ramp system designed to provide wheelchair and scooter access in modular structures such as classrooms, offices, churches, and public buildings. This tough and durable ramp system looks and feels permanent, but is actually modular and can be relocated with a portable structure. The ramp has a heavy-duty steel tube frame with a concrete panel surface, with custom sizes and dimensions to fit the location. The ramp can withstand water, freezing and thawing, impact, and fire. Ramp sections and platforms bolt together, and adjustable legs allow for installation on an uneven surface. OPTIONS: Turning or resting platforms; stairs; handrails. DIMENSIONS: Standard width is 48 inches; custom widths are available, and custom length is determined by rise and location. CAPACITY: 2,000 pounds.
CURB CUT RAMP
The Curb Cut Ramp, also called the Built-Up Curb Cut Ramp, is a curb ramp designed for use to provide wheelchair access at curbs. This ramp has a built-in non skid surface with side wings to allow safe access onto and off the curb. This portable unit can be installed at any curb, and is suitable for either permanent or temporary use. It is sturdy enough to support the weight of a vehicle that may roll over it.
DOUBLE BAR HANDRAILS
Double Bar Handrails are handrails designed for use on wheelchair ramps to provide support for users with balance or walking disabilities. The railings are made from galvanized or schedule 40 steel and are designed for permanent or semi-permanent installation. They come in sections which can be used individually or as a component of a larger ramp system. Double bar construction provides an added level of safety by adding a second support bar 16 inches below the handrail bar. Railings can be mounted directly onto the ramp system using bolts or they can be slid into receiver tubes which are welded onto the ramp system and secured by bolts or quick-release pins. The railings can be custom designed to meet a specific mounting requirement or they can be bolted to a cement pad using a mounting flange. In addition to ramps, the railings can also be used on stairways, platforms, bridges, or machine barriers. DIMENSIONS: Railings come in sections from 4 to 14 feet long.
GALVANIZED STEEL WHEELCHAIR ACCESS RAMP
Galvanized Steel Wheelchair Access Ramps are permanent or semi-permanent modular ramps designed for use to provide access for wheelchairs or scooters to homes, churches, businesses and other public commercial buildings. Each section can be used individually or as a component of a larger wheelchair ramp system. Ramps are made from galvanized steel and with a non-skid surface. Its open grate style allows for dirt, leaves, and other outside debris to fall through the surface, and there is virtually no snow or ice accumulation in the winter. OPTIONS: Handrails and double bar handrails. DIMENSIONS: Standard width is 37.5 inches; special widths are available. CAPACITY: 1500 pounds.
HANDIRAMP SINGLE BAR HANDRAILS
Handi-Ramp Single Bar Handrails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of galvanized or schedule 40 steel, these handrails help reduce slips and falls. The single rail bar can be used on stairways, ramps, pools, decks, escalators, porches, walkways, platforms, bridges and machine barriers. The handrails can be bolted directly onto the system or slid into the receiver tubes which are welded onto the HandiRamp ramp systems (sold separately; see entries). Handrails are secured by bolts or quick release pins, and can be designed to meet specific mounting requirements or bolted to a cement pad using a mounting flange.
HANDIRAMP SINGLEFOLD RAMP (MODELS ASF 2, ASF 3, ASF 4, & ASF 5)
The HandiRamp Singlefold Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made from durable welded aluminum, the ramp folds in half and can be carried like a suitcase. Its full platform has an anti-slip, high-traction surface, and can accommodate wheelchairs and scooters with various wheel configurations. DIMENSIONS (LxW): 2, 3, 4, or 5 feet x 30 inches. When folded, the ramp is 24 x 16 x 4 inches (model ASF 2), 36 x 16 x 4 inches (model ASF 3), 48 x 16 x 4 inches (model ASF 4), or 60 x 16 x 4 inches (model ASF 5). CAPACITY: 600 pounds. WEIGHT: 10 pounds (model ASF 2), 14 pounds (model ASF 3), 18 pounds (model ASF 4), and 22 pounds (model ASF 5).
HANDI-RAMP TRAK SYSTEM
The Handi-Ramp Trak System is a pair of portable folding tracks designed for wheelchairs and scooters. Tracks are made from extruded aluminum with a non-skid surface. The pair can adjust to any door width, accommodating even the narrow entries into recreational vehicles or minivans. Tracks come in non-folding, regular folding, and heavy-duty folding versions, and include built-in handles. OPTION: Stabilizer Bar to keep the ramps from moving or sliding while in use. DIMENSIONS: All tracks are 6.75 inches wide. Non-folding tracks are 30 or 45 inches long. Regular folding tracks are 60 or 90 inches long. Heavy duty folding tracks are 90, 96, or 120 inches long. CAPACITY: 600 pounds (non-folding and heavy duty folding) or 450 (regular folding). WEIGHT: 4.5 to 23 pounds per track.
HANDIRAMP VAN RAMP SYSTEM SERIES
The HandiRamp Van Ramp System Series are van ramps designed for use to provide access to vans and mini-vans. The system is mounted with a 3-bolt installation. Ramps are made from either aluminum or expanded metal with non-skid tread ways and wheel guides. All ramps in the series are equipped with spring assisted lifting, and fold up vertically inside the van door to conserve passenger space. OPTIONS: Floor mount; step well mount. DIMENSIONS: 5, 6.5, 7, or 8 feet long. Aluminum ramps are not available in the 8 foot length. The standard width is 26 inches. Other widths are available on special order. CAPACITY: 750 pounds (aluminum ramps) or 1000 pounds (expanded metal ramps).
HANDIRAMP WHEELCHAIR PORCH LIFT (MODELS HPL-50 & HPL-72)
The HandiRamp Wheelchair Porch Lift is an extrerior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This porch lift uses a gear box and chain system to raise and lower wheelchairs or scooters. The drive system operates in all weather conditions, from minus 30 degrees to 120 degrees Fahrenheit. With a key-operated, constant-pressure switch, the rider can start, stop, and change directions at any point. The electrical system is placed well above ground and sealed against moisture, and the porch lift is finished with a powder-coated finish to help protect it against the elements. Safety features include a non-slip platform, constant pressure switches, a low platform for easy roll-on/roll-off, safety barrier and railing, and rolled edges. POWER: Uses standard household current. DIMENSIONS: The maximum lift height is either 50 inches (model HPL-50) or 72 inches (model HPL-72). CAPACITY: 600 pounds.
HANDI-TREAD NON SKID STAIR STRIPS
Handi-Tread Non Skid Stair Strips are anti-slip tape designed for use to make ramps, floors, and other surfaces safer for individuals with balance or walking disabilities. This non-skid traction tread can be applied where water, ice, snow or sand can make walking slippery and dangerous, including boat docks, marinas, staircases, ramps, curb cuts, and homes. Strips are made of aluminum with a plain, anodized, or powder coated surface. DIMENSIONS (LxW): 30 x 1.875 inches. COLOR: Black, brown, red, bronze, yellow, green, blue, purple and gold (powder coated), aluminum (plain or anodized clear coat), or silver (factory second).
HANDI-TREAD NON SLIP PADS
Handi-Tread Non Slip Pads are non slip floor covering designed for use to make floor surfaces safer for individuals with balance or walking disabilities. These non-slip pads are suitable for indoor, outdoor, residential and commercial applications. They can improve the safety of many slippery surfaces and can substitute for non slip tape and salt. The pad is made from a non-rusting, perforated button, aluminum material, and attaches to any surface using screws. Anchors may be necessary in the case of a masonry surface. The pad is available with a plain or powder coated surface or with an anodized clear coat. DIMENSIONS (LxW): 3.75 x 12 inches. COLOR: Black, brown, or yellow (powder coated) or aluminum (plain or anodized clear coat). WARRANTY: Lifetime guarantee for residential applications.
HES-125 STAIR PLATFORM LIFT
The HES-125 Stair Platform Lift is an interior stair lift designed for use to provide access for wheelchairs and scooters in residential or commercial settings. Features include three- sided access to the wheelchair lift platform, custom colors, self-support posts, an emergency stop switch, and a fold-up seat with safety belt. The platform can be folded manually or by power to take up less stairway width. DIMENSIONS (DxW): Available platform sizes are 36 x 27.5 inches, 44 x 28.5 inches, 48 x 30 inches, or 44 x 30 inches.
MULTI-FOLD PORTABLE RAMP (MODELS AMF 5, AMF 6, AMF 7, AMF 8, AMF 10, & AMF 12)
The Multifold Portable Ramp is a portable wheelchair ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp can be carried like a suitcase. Made from welded aluminum, it has a full platform with an anti-slip high traction surface. For transport, the ramp separates into two pieces that fold in half, and the panels are locked together with a closure strap. DIMENSIONS (HxLxW): 10 x 60 x 30 inches in use, 9 x 32.25 x 16 inches folded (model AMF 5); 12 x 72 x 30 inches in use, 9 x 38.25 x 16 inches folded (model AMF 6); 14 x 84 x 30 inches in use, 9 x 44.25 x 16 inches folded (model AMF 7); 16 x 96 x 30 inches in use, 9.5 x 50.75 x 16 inches folded (model AMF 8); 20 x 120 x 30 inches in use, 9.5 x 62.75 x 16 inches folded (model AMF 10); 24 x 144 x 30 inches in use, 9.5 x 74.75 x 16 inches folded (model AMF 12). CAPACITY: 500 pounds (models AMF 10 and AMF 12) or 600 pounds (models AMF 5, AMF 6, AMF 7, and AMF 8). WEIGHT: 30 pounds (model AMF 5), 35 pounds (model AMF 6), 39 pounds (model AMF 7), 52 pounds (model AMF 8), 63 pounds (model AMF 10), or 73 pounds (model AMF 12).
MULTILIFT VERTICAL PLATFORM LIFT
The Multilift Vertical Platform Lift is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This ruggedly constructed lift is suitable for indoor or outdoor use and has an ACME screw drive system, a plastic safety underpin feature, an anti-skid surface on its floor and ramp, a manual hand crank to raise or lower the platform, and an electronic free relay device. COLOR: Floor and ramp surface are black.
NON-SKID STAIR NOSING
The Non Skid Stair Nosing is non-skid stair tread covering designed for use to make stairways safer for individuals with balance or walking disabilities. The tread has a nose that wraps over the front of the step to ensure solid footing. The tread is held in place with 9 screws while a strip of long-lasting, non-skid tape keeps the edges of the nosing slip free. The tread is made of plain, anodized, or powder coated aluminum. DIMENSIONS (DxW): 2.75 x 30 inches, with 1.125 inch nose. COLOR: Black, blue, brown, bronze, gold, green, purple, red or yellow (powder-coated), or aluminum (plain or clear anodized).
RUBBER THRESHOLD RAMP
The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch rise).
STAND ALONE THRESHOLD RAMP
The Stand Alone Threshold Ramp is an accessible threshold designed to make a doorway or single- step rise accessible to wheelchair or scooter users. The threshold has adjustable legs with a two-inch range, which can be helpful for locations where the surface is uneven, such as decks or turf. The ramp is made of aluminum or painted steel with a non-slip button or expanded metal surface. Safety side curbs are cut level to the top of the threshold allowing a door to open over the ramp. DIMENSIONS (LxW): 42 x 36 inches with 3- to 5-inch, 5- to 7-inch, or 7- to 9-inch rise. Legs adjust up to 2 inches. Custom dimensions are available. CAPACITY: 750 pounds. WEIGHT: 36 to 40 pounds depending on the size of the ramp.
The Suitcase Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair or scooter access over curbs, steps, and doorways. The ramp accomodates wheelchairs and scooters with various wheel configurations. To operate, the hinged ramp is unfolded and positioned for maximum safety and support. Its single-fold design allows it to be folded in half lengthwise to be carried like a suitcase when not in use. The ramp includes a built-in handle except in the 2-foot-long size. It is made of aircraft-grade aluminum with an extruded, non-skid driving surface. DIMENSIONS (LxW): 24 x 29, 36 x 29, 48 x 29, 60 x 29, or 72 x 29 inches. CAPACITY: 600 pounds. WEIGHT: 11 to 36 pounds depending on length.
VERTICAL PICKET HAND RAILS
Handi-Ramp Vertical Picket Hand Rails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of high-grade galvanized or schedule 40 steel, these rails have vertical pickets for safety. They can be mounted onto a Handi-Ramp ramp system by bolting them on or by sliding them into receiver tubes which are welded onto the system, and are secured by bolts or quick- release pins. Therails are available with or without a ramp system. DIMENSIONS: Pickets are spaced less than 4 inches apart.
VERTICAL PLATFORM LIFT
The Vertical Platform Lift is a wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This customizable lift provides access to multiple floors with a travel speed of 25 feet per minute. Each lift has a non-slip platform surface, steel construction, an emergency lowering mechanism, a 1.5 horsepower motor, and a keyed call station. The lift is available in four models: standard, tall, plexiglass, and mobile. The Standard Vertical Platform Lift uses a hydraulic system to raise and lower the platform for indoor or outdoor use. Designed to provide access to the second story of buildings, the Tall Vertical Platform Lift has a door for access to the platform. The Plexiglas Vertical Platform Lift is enclosed in plexiglass, and is available with either a landing gate or a door for access. The Mobile Vertical Platform Lift can be rolled inside or outside buildings to create wheelchair access. DIMENSIONS (DxW): Platform is 54 x 34 inches. CAPACITY: 750 pounds. COLOR: Beige.
Products distributed by Handi-Ramp, Inc. (listed alphabetically)
MOBILIFT AIRCRAFT WHEELCHAIR LIFT (MODELS AX & AXR)
The Mobilift Aircraft Wheelchair Lift is a wheelchair lift for aircraft boarding designed for use by individuals with mobility disabilities or spinal cord injury. This crank-operated unit can be used to enplane and deplane passengers with disabilities on regional and narrow body aircraft that are ground loading, including 737, 727, DC9, MD80, and F28 planes. The lift deck is supported at all four corners, and is designed to hold standard aircraft boarding chairs. DIMENSIONS (HxLxW): Model AX is 78 x 90 x 73 inches with a ground ramp 90 inches long; model AXR is 110 x 90 x 73 inches with a ground ramp 38 inches long. Both units have a bridge ramp 77 inches long. CAPACITY: 600 pounds. WEIGHT: 880 pounds (AX) or 920 pounds (AXR).
MOBILIFT CX PORTABLE WHEELCHAIR LIFT
The Mobilift CX is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities. This manual lift can be moved from place to place as needed on the built-in wheels. In areas of limited space, the user can be loaded on to the lift before it is wheeled into positon. Designed for single operator set-up and use, this lift features silent manual operation, pictogram decals with operating instructions, locking cable, auto fail-safe crank with load-activated drum brakes, automatic parking brakes to prevent rolling, a bridge ramp, and powder-coated handrails. Maximum lifting height is typically achieved in 20 seconds. OPTIONS: Enclosed shed, open mesh shed, tarp cover, opposite side loading, opposite side cranking, oversized platform, rough terrain option, narrow doorway option, and others. DIMENSIONS: The lift is 66 x 37.5 x 72 inches. The platform is 34 x 56 inches. The standard bridge ramp is 20 inches long x 32 inches wide. The bridge ramp is also available in optional lengths of 10, 30, 40, 50, or 60 inches. The maximum lifting height is 60 inches. CAPACITY: 600 pounds. WEIGHT: 242 pounds. WARRANTY: Two-year warranty.
MOBILIFT TX WHEELCHAIR LIFT FOR TRAINS
The Mobilift TX Wheelchair Lift for Trains is a portable wheelchair and scooter lift designed for use by individuals with mobility disabilities or spinal cord injury. This manual lift has a cranking system that allows a 300-pound passenger to be lifted with 11 pounds of crank force. The unit has large wheels to help negotiate rough terrain, and can be loaded onto any size pickup truck for multi-destination use. The lift can be moved on a hard level surface with four pounds of pressure. The lift has an extension ramp to increase the turning radius for larger wheelchairs, and a floating bridge ramp for alignment. A platform counter balance reduces cranking force. A locking cable is included to prevent unauthorized use. DIMENSIONS (HxLxW): 66 x 72 x 37.5 inches. The platform is 34 x 56 inches and the bridge ramp is 20 x 28 inches. Other optional ramp sizes are available. CAPACITY: 600 pounds. WEIGHT: 298 pounds. WARRANTY: 2 years from date of invoice.
The Mobilift VX is a wheelchair lift designed to provide access to boats for wheelchair users. This manually powered, portable unit has a crank control that requires 5 pounds of crank force to lift a 150 pound load and 11 pounds of crank force to lift 300 pounds. Made from aluminum and stainless steel, the unit can be moved on a hard level surface with 4 pounds of pressure, and can be transported in the back of a pickup truck and carried on a vessel. It is available in models to lift 60, 72, or 108 inches. The unit can be customized to accommodate specific vessels and piers. Pictogram decals depict the unit’s operating instructions. A locking cable is included to prevent unauthorized use. OPTIONS: Bridge ramps of varying lengths to reach over stairs and other obstacles; left-hand side cranking; and right-hand side loading. CAPACITY: 600 pounds. WEIGHT: 268 pounds.