Creative Controls, Inc.32217 Stephenson Hwy
Madison Heights, Michigan 48071
Telephone: 800-539-7237 or 248-577-9800.
Products manufactured by Creative Controls, Inc. (listed alphabetically)
1100 WHEELCHAIR HARDWARE
Hardware kit includes steel cross bars, seat belt attachment brackets, and attaching hardware for the driver wheelchair restraint with powered wheelwells system 1000 and a manual wheelchair. The total weight of this hardware is about 7 pounds.
The Armstrong Lift is a powered or manual wheelchair or scooter loader for sport utility vehicles (SUVs)designed for use by individuals with mobility disabilities or spinal cord injury. With the lift in its folded position, the ultra-compact, left-mounted single post design creates 100 percent clear interior floor space, a clearer side view, and allows the rear passenger seats to be fully assembled for use. The side-mount design increases rear bumper clearance for loading and unloading and the actuation motor has up to a 350-pound lifting capacity. The ergonomic Handle is equipped with up and down button controls and requires very little effort to swing the scooter or wheelchair into compact stowage spaces. The device swivels on the steel ball for maneuverability while stowing. The lifting arm can be removed from one vehicle and reconnected in another without tools (an installation kit is required in each vehicle). DIMENSIONS: Lifting travel is 43 inches.
The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attaches and detaches form the floor mounting bracket for periodic maintenance.
MOTOMATE (MODELS 6060 & 6260)
The Motomate are driving hand controls designed for use by individuals with lower extremity disabilities or spinal cord injury and those with the use of only one hand. Designed to respond to driver commands, the user pushes forward to brake and downward to accelerate. Both of these actions are intended to correspond to the driver’s natural motions. This product features a padded grip and can be mounted to either the right or left side of the steering wheel to suit the user’s need. Model 6260 is the push and pull version of the Motomate and is designed for situations where a right angle downward acceleration is obstructed. Model 6260 is the push and pull version of the Motomate designed for situations where a right angle downward acceleration is obstructed. This model is an alternative for taller drivers that have limited leg room. All other features are the same as Model 6060.
The Scooter Station is a wheelchair and scooter restraint system designed for use by individuals with mobility disabilities. Designed for use in full-sized vans, mini vans, and the beds of pickup trucks, this electronically-powered system requires no belts and operates with the touch of a button.
TOUCH CONTROL SYSTEM (MODEL 8000H)
System has a vacuum operator for the brake pedal and a vacuum operator for the accelerator pedal. Operators are controlled by a single control handle on the control module which is about 3 inches by 5 inches by 8 inches. Control module can be mounted on the door in front of the arm rest, on the engine housing or bracket attached to the engine housing of a van, or on a bracket to the right of the steering wheel in a sedan. 2 to 4 pounds of force are required to operate the accelerator by moving the handle forward or to operate the brake by moving the handle rearward. Control module is connected to the operators by flexible hoses so the module can be positioned for best driver convenience. This system does not interfere with normal pedal function.
Products distributed by Creative Controls, Inc. (listed alphabetically)
MILLENNIUM SERIES LIFT
The Millennium Series Lift is a platform van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This fully hydraulic lift is designed for installation in the side or rear door of a full-size van. It has a hand-held control and on-lift controls mounted on an arm that extends from the lift frame; a remote control is optional. The Millennium Series also features a manual backup system; an outboard roll top that engages in the fully up position before the lift platform leaves the ground; secure on-board stowing; and a threshold warning plate that prevents lift operation and activates visual and audible alarms when the lift platform is below vehicle floor level. DIMENSIONS: Platform width is 31 inches; platform length is 43, 47 or 57 inches. CAPACITY: 750 pounds. WEIGHT: 332 pounds.