Manufacturing & Production Services Corporation

2222 Enterprise Street
Escondito, California 92029
United States
Telephone: 800-243-4051.
Fax: 760-796-4302.
Web: http://mps-handcontrols.com/.
Email: info@mps-handcontrols.com.

Products manufactured by Manufacturing & Production Services Corporation (listed alphabetically)

1. AMPUTEE SPINNER

   The Amputee Spinner is a steering wheel spinner ring designed for use by drivers with a prosthetic upper limb or hook. This device features a large ring that attaches to the rim of the steering wheel. This device can be removed when not required by the driver. WARRANTY: 5 years.

2. MONARCH MARK IA

   The Monarch Mark IA is a hand control made of steel, stainless steel, and aluminum. The device is operated by pushing a handle parallel to the steering column for brake and at right angle towards the driver's lap for acceleration. The control also has toggle switches for light dimmer and horn. The hand control will not interfere with operation of the vehicle by an able-bodied driver. The control can be positioned for left or right hand operation. INSTALLATION: The device has a V-block mount and strap on the lower side of the steering column located approximately under the factory installed directional signals. The control also attaches to the accelerator suspension bar and brake pedal. An adapter mount makes this device compatible with all American and imported vehicles. WARRANTY: Five year on defective parts or components for original owner and original vehicle for which the equipment was purchased; 90-day on electrical components and accessories; and 30-day return guarantee.

3. MPS QUICK RELEASE LEFT FOOT GAS PEDAL WITH PEDAL GUARD

   The MPS Quick Release Left Foot Gas Pedal with Pedal Guard is an accelerator pedal for persons with limited or no use of the right leg requiring them to drive with their left leg. This pedal is installed on the left side and is mechanically linked to the original manufacturers pedal. The Pedal Guard shields the original pedal to make it inoperable. The pedal is fully adjustable. The lightweight design of the pedal and its quick release feature facilitate easy removal.

4. PALM SPINNER

   The Palm Spinner is a steering wheel spinner designed for use by individuals with grasping or upper extremity disabilities or spinal cord injury. This device attaches to the steering wheel and has two adjustable pieces that hold the driver's hand in place on the rim of the wheel. The spinner can be removed when not required by the driver. WARRANTY: 5 years.

5. PARKING BRAKE EXTENSION

   The Parking Brake Extension is a parking brake extension lever designed for use by individuals with lower extremity disabilities or spinal cord injury. This device attaches to the parking brake and enables the brake to be operated by hand. WARRANTY: 5 years.

6. QUAD FORK

   The Quad Fork is a steering wheel spinner designed for use by individuals with grasping or upper extremity disabilities or spinal cord injury. The device attaches to the steering wheel and has two long pieces that extend beyond the rim of the steering wheel to provide leverage, and which are adjustable by reshaping the metal insert inside the outer cover. This device can be removed when not required by the driver. WARRANTY: Five years.

7. SPINNER KNOB

   The Spinner Knob is a steering wheel spinner designed for use by individuals with grasping or upper extremity disabilities or spinal cord injury. It attaches to the rim of the steering wheel, and features a large knob that can be grasped, pushed, or pulled to control the wheel. The spinner can be removed from the steering wheel when not required by the driver. . WARRANTY: Five years.

8. TRI PIN STEERING DEVICE

   The Tri Pin Steering Device is a steering wheel spinner designed for use by drivers with grasping or upper extremity disabilities or spinal cord injury. This device attaches to the rim of the steering wheel. It features three rods for grasping, one on the rim and two slightly off the rim. This device can be removed when not required by the driver. WARRANTY: 5 years.

See Manufacturing & Production Services Corporation products that are no longer available.