J T Posey Company

5635 Peck Road
Arcadia, California 91006-0020
United States
Telephone: 800-447-6739 or 626-443-3143.
Fax: 800-767-3933 or 626-443-5012.
Web: http://www.posey.com.
Email: info@posey.com.

Products manufactured by J T Posey Company (listed alphabetically)

1. ABDUCTION WEDGE / KNEE SEPARATOR (MODEL 6307)

   The Abduction Wedge / Knee Separator, model 6307, is an abductor designed to properly position the knees of individuals who use wheelchairs. The contoured sides of the machine-washable separator hug the thighs and maintain four to five inches of knee separation. Dual Velcro straps comfortably maintain positioning. DIMENSIONS (HxWxD): 7 x 4 x 5 inches.

2. BED CRADLE AND FOOT SUPPORT (MODELS 6435 & 6437)

   The Bed Cradle, model 6435, and Foot Support, model 6437, is a blanket support designed for use by individuals at risk for pressure sores and foot drop. The sturdy steel frame clamps securely to the mattress to prevent the device from moving while holding the blankets off the user's feet. The three-piece frame disassembles for storage.The cotton foot support cover (sold separately) slips over the frame to help prevent foot drop. DIMENSIONS: 36 inches wide.

3. BEDFELLOW POSITIONING ROLL (MODEL 6306)

   The Bedfellow Positioning Roll, model 6306, is a positioning roll designed for use by individuals with physical disabilities. This flexible three-section pillow provides full body support in lateral and dorsal positioning. The pillow can be folded to fit body contours and the center pillow can be rolled while still attached or zipped off to provide lumbar or head support. Side leaning while seated can be managed by buttoning the two sides of the pillow together in front of the users. The Bedfellow secures to the back of a wheelchair or geri chair with the attached nylon pillow ties to prevent sliding. The inner pillows are covered in bacteriostatic Staph-Chek material. An outer machine-washable flannel cover is included.

4. COMFORT SHOE (MODELS 6415 & 6416)

   The Comfort Shoe, models 6415 and 6416, is a heel protector designed for use by individuals at risk for pressure sores. Designed for use in bed or while seated, these machine-washable foam shoes are lined with synthetic fur and close with Velcro straps. Model 6415 has a closed toe and model 6416 has an open toe. SIZE: One size. DIMENSIONS (HxL): 10 x 12 inches.

5. CONVEX GEL CUSHION (MODELS 6518 & 6518W)

   The Convex Gel Cushion is a gel and foam seat cushion designed to reduce the risk of pressure sores and to support posture for people who use wheelchairs. This cushion features a firm convex bottom to fill a wheelchair sling to provide a stable seating surface. The waterproof cushion is available in a standard model (no. 6518) and a wedge model (no. 6518W) and includes a non-slip, water-repellent, wipe-clean vinyl cover that unzips for removal. DIMENSIONS (WxDxH): Model 6518 is 18 x 16 x 3 inches and model 6518W is 18 x 16 x 4 to 2 inches (front to back).

6. DELUXE GEL FOAM CUSHION (MODELS 6519SC & 6500SC)

   The Deluxe Gel Foam Cushion is a gel foam seat cushion designed for use in wheelochairs. This cushion is designed to equalize pressure and reduce soreness and features a foam-encapsulated gel bladder that will not bottom out. The standard cover is a water-repellant Staph-Chek cover with carrying handles. OPTIONS: A fleece cover is available. DIMENSIONS (WxDxH): Model 6519SC is 18 x 16 x 2 inches and model 6500SC is 20 x 18 x 2 inches.

7. DELUXE GUARD RAIL PADS (MODELS 5605, 5605W, 5606, & 5607)

   Deluxe Guard Rail Pads are side rail pads designed to prevent injury from bed side rails. Designed to provide maximum cushioning and protection, these pads are made of durable, firm foam and covered with soft, soil-resistant vinyl. The pads attach wih quick-release buclkes. Model 5605W features a vinyl window that runs the length of the pad, enabling the user to see out. DIMENSIONS: Models 5605 and 5605L are 72 inches long. Model 5606 is 60 inches long and model 5607 is 43 inches long.

8. DELUXE LATERAL ARM SUPPORT (MODEL 6320)

   The Deluxe Lateral Arm Support, model 6320, is a trunk support designed for use by wheelchair users who lean laterally. This padded trough has an ambidextrous design, enabling it to fit either wheelchair armrest. The contoured trough supports the arm and encourages arm use and rehabilitation. Optional self-releasing straps may be used to stabilize arm position. This support has a soft, water-repellent, wipe-clean vinyl cover.

9. DELUXE WEDGE CUSHION (MODEL 6535)

   The Deluxe Wedge Cushion, model 6535, is a wedge foam seat cushion designed for use in wheelchairs. Made of firm, high-density foam, this cushion gently rotates the hips back to prevent forward sliding. Covered in water-repellant, wipe-clean, non-slip vinyl, the cushion has a convex bottom to provide a stable foundation and prevent seat hammocking. DIMENSIONS (WxD): 18 x 16 inches. The cushion tapers from 4 inches high in the front to 2 inches high in the back.

10. DESK ARM / LARGE LAP HUGGER (MODELS 6515l, & 6517)

    The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.

11. DOOR GUARD (MODEL 8210)

    The Door Guard, model 8210, is a wandering patient system designed for use with individuals with cognitive disabilities. This machine-washable banner has a "STOP" sign in the center for a strong visual warning not to enter or exit through the door and attaches to both sides of the door frame with Velcro strips. DIMENSIONS (WxH): 53 x 12 inches. Fits doors up to 53 inches wide.

12. DOUBLE-SECURITY MITTS (MODELS 2814 & 2819)

    The Double-Security Mitts, models 2814 and 2819, are restraint mitts designed to prevent individuals with cognitive or emotional disabilities from injuring themselves or removing IVs or catheters. These machine-washable ambidextrous mitts feature double Velcro closures and fiber-fill-padded palms. Model 2814 has a mesh back and model 2819 has a padded back. Optional use connecting straps provide additional limitation of motion. SIZE: One size.

13. DRAINAGE BAG STRAPS (MODEL 8142)

    The Drainage Bag Straps, model 8142, are leg bag straps designed for use by individuals wh use urinary catheters. The soft, non-slip foam straps secure an urinary drainage bag to the leg. SIZES: One size fits all.

14. DROP SEAT AND CUSHIONS (MODELS 6540, 654020, 6541, & 6519)

    The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the of pressure sores or a foam only cushion is available for use with the drop seat. DIMENSIONS: The model 6540 drop seat is 18 inches wide and model 654020 is 20 inches wide. Model 6541 is an 18-inch wide foam cushion. The gel and foam cushion, model 6519, fits both the 18- and 20-inch drop seats.

15. ECONOMY GEL FOAM CUSHION (MODEL 6512)

    The Economy Gel Foam Cushion, model 6512, is a gel and foam seat cushion designed for use in wheelchairs. This cushion helps reduce pressure and comes with a water-repellent, bacteriostatic Staph-Chek cover. DIMENSIONS (WxDxH): 18 x 16 x 2 inches. COLOR: The cover is blue.

16. ECONOMY MITT (MODEL 2826)

    The Economy Mitt, model 2826, is a restraint mitt designed to prevent individuals with cognitive or emotional disabilities from injuring themselves or removing IVs or catheters. These machine-washable ambidextrous mitts feature Velcro closure at the wrist, closed-end mesh backs, and fiber-fill-padded palms. SIZE: One size.

17. ELASTIC MESH HEEL / ELBOW PROTECTOR (MODEL 6221S-M & 6221M-L)

    The Elastic Mesh Heel/Elbow Protector is a heel or elbow protector designed for use by individuals at risk for skin irritation or pressure sores. A double-layer protective foam insert reduces pressure and increases air flow. The seamless elastic mesh stockinette sleeve stretches and conforms to fit. SIZES: Model 6221S-M fits small and medium and model 6221M-L fits medium and large.

18. ELASTIC MESH SIDE RAIL PROTECTORS (MODEL 5707 & 5707H))

    The Elastic Side Rail Protectors, model 5707 and 5707H, are side rail pads designed to prevent injury from entrapment in bed side rails. This product features pads for two side rails connected by a one-piece under-mattress section. Each pad covers a rail and fills the gap between the rail and the mattress. Designed to fit most healthcare facility beds, these machine-washable covers stretch to fit the rails, expand and contract during bed positioning, and allow access to control buttons. DIMENSIONS: Model 5707 fits rails up to 72 inches long and is recommended for both upper and lower side rails; model 5707 fits rails up to 36 inches long and is recommended for either upper or lower rails.

19. ERGONOMIC WALKING BELT (MODEL 6534)

    The Ergonomic Walking Belt, model 6534, is a gait belt designed for use with individuals with mobility and balance disabilities. This wide, machine-washable cotton belt features buckle closures, plastic handles on either side, and a cotton handle in the back to provide secure grips for therapists and care givers. SIZES: Small (fits waists 26 to 34 inches), medium (fits waists 33 to 38 inches), large (fits waists 36 to 46 inches), and extra large (fits waists 44 to 52 inches).

20. E-ZEE GAIT BELT (MODELS 6524V & 6528V)

    The E-Zee Gait Belt, models 6524V and 6528V, is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers for people with balance, lower extremity, mobility or walking disabilities. This machine-washable cotton belt has Velcro closure for easy application. DIMENSIONS (LxW): 62 x 2 inches. The belt fits 24- to 52-inch waists. COLOR: Model 6524V is white and model 6528V is navy.

21. EZ-ON MITTS (MODELS 2817)

    The EZ-On Mitts, model 2817, are restraint mitts designed to prevent individuals with cognitive or emotional disabilities from injuring themselves or removing IVs or catheters. These machine-washable, ambidextrous mitts feature Velcro closure at the wrist, closed-end mesh backs, and fiber-fill-padded palms. The three-fingered design facilitates application while reducing the wearer's dexterity. SIZE: One size.

22. FINGER CONTRACTURE CUSHION (MODELS 6560 & 6562)

    The Finger Contracture Cushion is a hand positioner designed to prevent finger contractures and closure of the hand for individuals who have had strokes or who have other upper extremity disabilities. This pad has a terrycloth cover to absorb moisture and protrusions to separate fingers. An elastic band keeps the pad in place. SIZES: Small, model 6560, and large, model 6562. DIMENSIONS: The small cushion is 3 x 5 inches and the large cushion is 5 x 5 inches.

23. FLOOR CUSHION (MODEL 6020)

    The Floor Cushion, model 6020, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and the non-slip bottom helps prevent slipping during use. This mat is sized to slide under the bed between the wheels when not in use. Covered in bacteriostatic vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH): 69.5 x 26 x 1 inches.

24. FOAM FOOT ELEVATOR / STABILIZER (MODELS 6128 & 6129)

    The Foam Foot Elevator, model 6128, is designed to prevent foot drop andd pressure sores. The ankle fits in the cut-out in the dense polyurethane base and a Velcro strap maintains the foot position. This elevator may be used supine or side lying position. The Foam Foot Stabilizer, model 6129, has the same features as the Elevator with the addition of a pedestal base to prevent foot rotation.

25. FOOT DROP SPLINT (MODEL 6405)

    The Foot Drop Splint is a night foot splint designed to maintain proper foot positioning and prevent foot drop. This lined splint adjusts for internal or external rotation and foam straps secure with Velcro. A cut-out at the heel reduces pressure.

26. FOOT HUGGER (MODELS 6351, 6352, 6353, & 6354)

    The Foot Hugger is a legrest panel designed to prevent the wheelchair user's feet from sliding off the foot plates. This foam-cushioned panel is covered in wipe-clean vinyl. This unit protects the user's legs and includes an attached extender to raise the height of the foot plates. DIMENSIONS: All models fit 18-inch wide chairs. Model 6351 is one inch high, model 6352 is two inches high, model 6353 is three inches high, and model 6354 is four inches high.

27. FULL SIDE RAIL COVER (MODEL 5702)

    The Full Side Rail Cover, model 5702, is a side rail pad designed to prevent injury from bed side rails. These machine-washable covers are lined with synthetic fur and attach over the top of the side rail and under the mattress. The bed rails can be raised or lowered without removing the covers and reinforced holes permit the attachment of restraints.

28. GAIT / TRANSFER BELTS (MODELS 6529, 6531, 6525, 6527, 65252, 6528, & 6530)

    The Gait Belt / Transfer Belts are designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. These machine-washable cotton webbing belts are available in standard and extra-long styles and close with secure, nickel-plated metal buckles. Model 6530 is made of heavy-duty webbing. OPTIONS: Personalization is available. DIMENSIONS: The standard belts fit waists from 24 to 52 inches and the extra-long belt fits waists from 53 to 70 inches. COLOR: Model 6529 is white with an emboidered ribbon pattern, model 65251 is confetti (pastel check), models 6530 is pastel bouquet with heavy duty webbing (pastel stripe),model 6531 is pastel bouquet (pastel stripe), model 6525 is coral reef, model 6527 is fiesta stripe, model 65252 is lavender (pattern), and model 6528 is navy.

29. GAP PROTECTORS (MODEL 5706)

    Gap Protectors, model 5706, are side rail pads designed to provide protection from injury from bed side rails. These pads fill the gap between double side rails, while still allowing access to built-in patient controls on hospital-style beds. Made of quarter-inch plywood and covered in thick, wipe-clean vinyl, these pads attach to the rails with quick-release buckles.

30. GENERAL PURPOSE BELT (MODELS 5550 & 5550B)

    The General Purpose Belt is a belt restraint designed to remind users not to exit a stretcher bed without assistance. This machine-washable belt secures around the mattress and features Velcro closure. The belt can be secured at the chest, waist, or legs. Model 5550 fits stretchers and model 5550B fits beds. DIMENSIONS (LxW): 66 x 3 inches (model 5550); 90 x 3 inches (model 5550B).

31. HEEL PILLOW (MODELS 6115, 6115L, & 6116)

    The Heel Pillow is a heel protector designed to prevent pressure sores. These machine-washable, pillow-like protectors are stuffed with hollow core micro-fiber filling and covered in cotton/polyester fabric. They secure with Velcro straps. SIZES: Models 6115 and 6116 are one size fits most. Model 6115L is extra large for those with large feet or ankles or severe edema. DIMENSIONS (LxH): 10 x 9 inches (models 6115 and 6116); 11.5 x 11 inches (6115L). COLOR: Model 6115 is blue plaid, model 6115L is pastel plaid, and model 6116 is solid navy.

32. INCONTINENT SHEATH HOLDER (MODEL 6550)

    The Incontinent Sheath Holder, model 6550, is a catheter strap designed to secure external male catheters. This self-securing disposable strap holds the urinary drainage sheath in position. SIZES: One size.

33. KEEPSAFE FALL MONITOR (MODEL 6511, 8330, 8340, & 8350)

    The KeepSafe Fall Monitor is a wandering patient system designed to alert caregivers when individuals with cognitive, mobility, or balance disabilities leave a bed, chair, or wheelchair without assistance. This unit is designed to be used with a choice of monitor systems and offers five selectable alarm tones. The monitor features a recessed on/off button and a flashing light indicator to confirm normal operation. The auto pause feature delays monitoring until the individual is positioned in the chair or bed. Once activated, the alarm sounds immediately when the individual rises and auto reset silences the alarm and resets it when the individual sits or lies down. The alarm volume is 95 decibels and the volume can be decreased using the included optional sound dampening plug. Two Velcro mounting options permit attachment to most beds, chairs, wheelchairs and geri chairs. The system is available with a choice of a gel foam cushion system (model 6511), a monitor with a chair pad (model 8330), or a monitor with a chair belt (model 8340). The monitor unit is also available separately (model 8350). POWER: Provides up to six months of monitoring using a 9-volt battery (included). The unit features an audio low-battery warning. OPTIONS: Chair pad sensor, chair belt sensor, under mattress reusable bed sensor, and a 6-month above mattress bed sensor. WARRANTY: Lifetime warranty on the monitor and a one-year warranty on the chair pad, cushion sensor, and chair belt.

34. KEY LOCK BELT (MODEL 1334)

    The Key Lock Belt, model 1334, is a belt restraint designed to prevent individuals with cognitive and behavioral disabilities from leaving a bed without assistance. This belt attaches to a bed with two attachment straps (included) and fastens with a buckle that has a key lock. It fits around the user's waist, and allows he or she to sit up or move from side to side in bed. The belt and attachment straps are machine washable. DIMENSIONS (LxW): 12 X 4 inches (belt); fits waist sizes 24 to 56 inches; attachment straps are 42 inches long.

35. LAP HUGGER (MODELS 6515, 6515M, & 6515N)

    The Lap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This soft lap cushion fits between the wheelchair user and the wheelchair frame and also provides arm support. The standard model have notches to fit around the armrest posts. Model 6515N is narrower for easier removal. Both styles have a wipe-clean vinyl cover. DIMENSIONS: Both styles fit 16- to 18-inch wide wheelchairs. The standard model is 4 inches thick. COLOR: Model 6515 is blue and model 6515M is mauve.

36. LAP TOP TRAY (MODELS 8220 & 8221)

    The Lap Top Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or remain seated for long periods of time. These trays prevent forward leaning and provide elbow and arm support, while providing an activity surface. Model 8221 is padded for extra support and to reduce the risk of pressure sores. Model 8220 is clear to promote body awareness. Both models secure to the wheelchair with Velcro straps. DIMENSIONS (LxWxH): 22 x 20.5 x 0.5 inches. Fits wheelchairs that are 16 to 18 inches wide.

37. LATERAL STABILIZERS (MODELS 8212, 8212SC, 8216, & 8216SC)

    The Lateral Stabilizers are lateral trunk supports designed to promote proper trunk alignment for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs who lean laterally. The secure fit prevents rolling of the stabizer on the armrest. These bolsters are available with removable, washable cotton covers (models 8212 and 8216) or vinyl (models 8212SC and 8216SC). The 8212 models are designed for use with wheelchairs with full-length arms and the 8216 models are designed for use with wheelchairs with desk-length arms. DIMENSIONS (LxW): 16.5 (model 8212 or 8212SC) or 11.5 (8216 or 8216SC) x 6.5 inches. COLOR: Navy blue (8212 or 8216) or light blue (8212SC or 8216SC).

38. LEG HUGGER (MODEL 6355)

    The Leg Hugger, model 6350, is a legrest panel for people with lower extremity or mobility disability or spinal cord injury and others who use wheelchairs designed to prevent the wheelchair user's feet from sliding off foot plates between the legrests. This panel lies flat against the leg bars to allow full use of the foot plates and attaches to wheelchairs with quick-release straps. Cushioned with foam padding, the panel is covered in wipe-clean vinyl. DIMENSIONS (WxH): 15.5 x 9 inches. Fits chairs from 18 to 20 inches wide.

39. LONG BOOT (MODEL 6112)

    The Long Boot is a heel protector for people at risk for pressure sores or ulcers designed to minimize pressure on the heel by distributing weight evenly along the calf. The machine-washable synthetic fur covers the heel, ankle and leg to mid-calf boot and secures with four straps with hook and loop fasteners. SIZES: One size. DIMENSIONS (LxH): 14 x 9 inches. COLOR: Natural.

40. NON-SKID SLIPPERS (MODEL 6240 & 6241)

    The Non-Skid Slippers, models 6240 and 6241, are designed for men and women with balance and walking disabilities who require non-skid footwear to help prevent falls. These machine-washable slippers have terry cloth uppers and ribbed rubber soles for a secure grip on dry floors. SIZES: Small (fits women's sizes 6 to 7); medium (fits women's sizes 7 to 8 and men's sizes 5 to 7); medium/large (fits women's sizes 9 to 11 and men's sizes 8 to 10); large (fits men's sizes 10 to 11); and x-large (fits men's sizes 12 to 13). COLOR: The small slippers are white; the medium slippers are blue; the medium/large slippers are brown; and the large slippers are beige; the extra large slippers are navy blue.

41. OMNI BELT (MODEL 4116PQ)

    The Omni Belt, model 4116PQ, is a belt restraint designed to remind users not to exit the bed without assistance. This machine-washable belt secures around the mattress and features a quick-release buckle. SIZES: One size.

42. ORTHOTIC DROP SEAT (MODEL 6331)

    The Orthotic Drop Seat, model 6331, is a solid seat insert designed to lower a wheelchair seat to enable foot propulsion of a wheelchair or to enable the user to reach the footplates. This seat replaces a standard sling seat and provides adjustable drop and it may be configured to create a wedge to prevent forward sliding. A removable padded, wipe-clean vinyl cover is included. DIMENSIONS: This seat fits 18-inch wide chairs and the drop is adjustable up to 3.5 inches.

43. PALM CONE WITH FINGER SEPARATORS (MODEL 5609)

    The Palm Cone with Finger Separators, model 5609, is a hand cone designed to prevent finger contractures for people who have had strokes or who have other upper extremity disabilities. This machine-washable cone-shaped device conforms to the hand's natural shape and protrusions keep fingers separated. The terry cloth cover absorbs moisture and the attached elastic band secures the cone in the proper position.

44. PALM GRIPS (MODELS 6507 & 6508)

    The Palm Grips are hand positioners designed to prevent finger contractures and skin breakdown on the palm for individuals who have had strokes or who have other upper extremity disabilities. These machine-washable pads permit free finger movement and have terrycloth covers to absorb moisture. An elastic band keeps the pad in place. SIZES: Small, model 6507, and large, model 6508. DIMENSIONS: The small grip is 2.5 x 4.5 inches and the large grip is 3 x 5 inches.

45. PEEK-A-BOO MITTS (MODELS 2811)

    The Peek-A-Boo Mitts, model 2811, are restraint mitts designed to prevent individuals with cognitive or emotional disabilities from injuring themselve or removing IVs or catheters. These machine-washable ambidextrous mitts feature Velcro closure at the wrist, fiber-filled padded backs, and fiber-fill-padded palms. The quick-check flap on top enables circulation checks without removing the mitt. SIZE: One size.

46. PERSONAL ALARM (MODEL 8202L)

    The Personal Alarm, model 8202L, is a wandering patient system designed to alert caregivers when individuals with cognitive, mobility, or balance disabilities leave a bed, chair, wheelchair, or toilet without assistance. This unit offers five selectable alarm tones and the volume of the alarm may be decreased using the sound dampening plug. The adjustable alarm cord attaches to the individual's clothing using the included clip. Two mounting options enable use on a toilet, chair or wheelchair, or bed. POWER: Provides up to six months of monitoring using a 9-volt alkaline battery. The unit features a low-battery warning light. DIMENSIONS: The cord adjusts from 31 to 60 inches. WARRANTY: Lifetime warranty.

47. POSEY ADULT FEEDING BIB

    The Posey Adult Feeding Bid is a bib designed for use by individuals with upper extremity or eating disabilities. Made with durable quilted laminated polyester, this bib is reversible and covers from neck to lap. It fastens in the rear with hook and loop closure and is made to fit most individuals. Other features include a built-in catch pocket to shield against spilled food and beverages. This bib is machine washable. DIMENSIONS (LxW): 30 x 18 inches. COLOR: White.

48. POSEY ARM SLING (MODEL 7411)

    The Posey Budget Arm Sling, model 7411, is designed to stabilize weak, injured, or paralyzed arms. This envelope-style arm sling fits either the right or left arm and has a closed elbow and a single strap with buckle closure that crosses the shoulder and attaches at the wrist and elbow. SIZES: Small, medium, or large. Other features include an inside thumb loop for additional support. The sling is made of 100-percent cotton and is machine washable. DIMENSIONS (LxW): 14 x 7 (small), 16 x 7 (medium), 18 x 8 (large), or 20 x 9 (extra large). COLOR: Navy blue.

49. POSEY BODY HOLDER, COTTON FLANNEL WITH COTTON TIES (MODEL 1731)

    Safety restraint for bed or wheelchair. Wide cotton flannel body wrap with long ties. Degree of restraint varied by positioning slot in front or rear. Sizes: small, medium, large.

50. POSEY CATHETER TUBE HOLDER STRAP (MODEL 8143)

    The Posey Catheter Tube Holder Strap, model 8143, is a catheter strap designed to secure external urinary or nasal catheters. This self-securing foam strap eleiminates the need for tape or adhesives. SIZE: One size fits all.

51. POSEY CINCH LIMB HOLDER (MODEL 2528)

    The Posey Cinch Limb Holder, model 2528, is a limb restraint. The unit is foam lined with a cotton webbing strap and Velcro closure. The holder is available for disposable or reusable applications. Single patient charge item.

52. POSEY COMFORT PAD (MODELS 6324, 6340 & 6360)

    The Posey Comfort Pad, models 6324, 6340 and 6360, is a decubitus pad designed for use by individuals at risk for pressure sores. This decubitus pad is made of synthetic fur and is machine washable. Standard or lightweight available. DIMENSIONS: 24 x 30 inches (model 6324); 30 x 40 inches (6340); 30 x 60 inches (6360).

53. POSEY COMFY-SEAT (MODELS 6526 & 6526G)

    The Posey Comfy-Seat is a seat cover for wheelchairs or geri chairs designed for persons at risk for skin breakdown or who have mobility disabilities. This flame-retardant, machine-washable padded cover fastens to the chair with ties and also provides protection pinching on chair parts. Reinforced openings enable the use of a positioning belt. Model 6526 is intended fo use with wheelchairs and model 6526G is intended for use with geri chairs.

54. POSEY CONDOM CATHETER HOLDER (MODEL 6550)

    Sheath holder designed to hold condom attached catheters for incontinent males, wraps around condom, velcro closure. 1/4 inch polyurethane foam. Washable. Non adhesive.

55. POSEY DELUXE LIMB HOLDER (MODEL 2625)

    Limb holder with synthetic pile padding, loop closure with Velcro. Cotton webbing tie. One size. Washable.

56. POSEY DELUXE LIMB HOLDER (MODEL 2631)

    The Posey Deluxe Limb Holder, model 2631, is a limb restraint designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves. Made of cotton with a flannel lining, this restraint can be attached to the wrist or ankle. It has straps that thread through a "button-hole" and loop on the cuff. The cuff may be released and reapplied without releasing the tie, and it secures to a movable portion of bed with double-strap ties. The restraint will not tighten when pulled. It is machine washable. DIMENSIONS (LxW): 13.5 x 4.5 inches; circumference adjusts from 6 to 9 inches; strap length is 54.5 inches.

57. POSEY DISPOSABLE LIMB HOLDER FOR WRIST (MODEL 2526)

    Limb holder with orthopedic felt wrist pad, prong buckle, single long cotton webbing tie. Single patient charge item. Disposable or reusable.

58. POSEY FINGER CONTROL MITTS,(MODELS 2815 & 2816)

    The Posey Finger Control Mitts are restraint mitts designed for use with adults with cognitive or emotional disabilities who are at risk of injuring themselves or of pulling out catheters or IV lines. The palms of these ambidextrous mitts are filled with machine-washable fiberfill. The mitts secure with Velcro and include connecting straps to limit range of motion if necessary. Model 2815 features an open finger design and model 2816 has a closed end and a mesh back. SIZE: One size.

59. POSEY FOAM TRACH TIES (MODEL 8197)

    Posey Foam Trach Ties, model 8197, are a tracheostomy collar designed to secure tracheostomy tubes for children and adults. These soft collars have foam padding and double track Velcro to provide extra security to prevent extubation during coughing. SIZES: Small (for necks 7 to 9 inches in circumference), medium (for necks 9 to 17 inches in circumference), and large (for necks 13 to 24 inches in circumference).

60. POSEY FOOT ELEVATOR, 4 INCH SPIRAL CUT (MODEL 6532)

    Foot elevator to prevent the formation of decubitus ulcers. Foam circle with opening for placing on ankle. Velcro closure. Holds heel off bed. 4 inches diameter, available in 6 inch diameter.

61. POSEY FOOT-GUARD (MODELS 6410 & 6412)

    The Posey Foot-Guard is a heel protector and foot protector designed for use with individals at risk for footdrop and pressure ulcers on the heel. The unit fits the right or left foot and the large rigid plastic shell extends beyond toes and helps keep bedding off the toes while maintaining proper foot positioning. Both models feature a polyester pile fabric liner and two padded Velcro straps. Model 6412 also features an adjustable T bar at heel to maintain desired angle of hip rotation. OPTIONS: Replacement liners are available.

62. POSEY GAIT BELT, WHITE (MODEL 6524)

    The Posey Gait Belt, White, model 6524, is designed for use with individuals with mobility or balance disabilities. This belt is made of two-inch wide cotton webbing and has a nickel-plated, metal buckle closure. DIMENSIONS: Fits waist size up to 51 inches. COLOR: White.

63. POSEY HAND CONTROL MITTS, RIGID DACRON (MODEL 2820)

    The Posey Hand Control Mitts, Rigid Dacron, model 2820, are restraint mitts designed to prevent individuals with cognitive or emotional disabilities from injuring themselves or removing IVs or catheters. Designed to fit either hand, these machine-washable, ambidextrous mitts feature Velcro closure at the wrist, closed-end mesh backs, and fiber-fill-padded palms. The three-fingered design facilitates application while reducing the wearer's dexterity. The mitts do not have finger separators and are machine washable. OPTIONAL: Secure straps (model 2809 sold separately).SIZE: Small, medium, and large.

64. POSEY HOUDINI SECURITY SUIT (MODEL 3420)

    The Posey Houdini Security Suit, model 3420, is a vest restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a bed or wheelchair without assistance. This device is intended to help prevent patient positioned in the middle of the bed or from sliding forward in wheelchairs. The vest fits over the head and the bottom is secured with a single strap to the bed frame or wheelchair tilt bars. The vest is loose enough to accommodate pads or diapers. The vest is made of breezeline mesh and is machine washable. SIZE: Small, medium, large, or extra large. The strap is 72 inches long.

65. POSEY INFANT ELBOW SPLINT (MODEL 4642)

    The Posey Infant Elbow Splint, model 4642, is an elbow restraint designed to prevent children up to 2 years of age from bending his or her elbow to help facilitate medical treatment and promote healing. This machine washable splint wraps around the arm and secures with Velcro hook and loop closure. The splint may also be pinned to clothing to hold it in position. DIMENSIONS: The splint is 4 inches long (10 centimeters).

66. POSEY INFANT EYE PROTECTORS (MODELS 4646, 4645, & 4644)

    The Posey Infant Eye Protectors are patches designed to prevent ultraviolet light radiation during bilirubin light treatment of newborn infants. SIZE: Premature and newborn sizes available.

67. POSEY PADDED LIMB HOLDER (MODEL 2525)

    Padded limb holder, polyester pile wrist pad. Buckle fastener, single long cotton webbing tie.

68. POSEY PALM CONE WITH REMOVABLE TERRY COVER (MODEL 5608)

    The Posey Palm Cone with Removable Terry Cover, model 5608, is a hand cone designed for use by individuals who have had strokes or spinal cord injuries. The unit includes an elastic strap to attach the cone to the user's hand and a terry cloth cover.

69. POSEY PEDIATRIC LIMB HOLDER (MODEL 4733 & 4734)

    The Posey Pediatric Limb Holders, models 4733 and 4734, are child limb restraints designed for use with infant patients up to two years of age and pediatrics from two to five years of age. The straps prevent pulling of IV lines or catheters while receiving medical treatment. Made of soft foam, these limb restraints feature double strap ties with Velcro hook and loop closures that facilitate easy adjustment. The straps can be used on either arms or legs. DIMENSIONS (LxW) 5.5 x 1 inch (Infant); 7 x 1.5 inches (Pediatrics). Straps for infants are 26 inches long. Straps for pediatrics are 32 inches long.

70. POSEY PELVIC HOLDER, BREEZELINE (MODEL 4411)

    Diaper type pelvic restraint to prevent sliding out of a wheelchair. 4 ties fasten behind wheelchair back.

71. POSEY POSITIONING WEIGHT (MODEL 7525)

    Positioning weight for physical control of body position. Sand filled, vinyl rubber bag. 1 to 10 pounds in 1 pound increments.

72. POSEY RESTRAINT NET, NYLON MESH (MODEL 8115)

    Mesh fabric restraint net to hold person to bed or cot, for general physical control. Extends from neck to ankle, four straps on each side to fasten to bed. Elbow, wrist and ankle restraints. Padding at neck, shoulders, elbows and wrists.

73. POSEY SADDLE BAG WEIGHT (MODEL 7545)

    Saddlebag weights, vinyl bag, Velcro fastener, handle. 1 to 10 pounds in 1 pound increments.

74. POSEY SAFETY BAR KIT (MODELS A 8151 & B 8152)

    Restraint bar for wheelchair. Padded bar fits across waist, adjustable positions. Y shoulder harness attaches to bar and push handles of wheelchair. Second Y harness attaches to bar and under seat of wheelchair. Model A ($60.11) has single catch lock. Model B ($66.30) has catch which must be twisted and depressed to release.

75. POSEY SAFETY BELT (MODEL 1332)

    Cotton safety belt for bed, cotton strap with slide buckle. Wraps around waist and ties to bed. Person can loosen independently. Sizes: small, medium, large, extra large.

76. POSEY SAFETY BELT WITH QUICK RELEASE BUCKLE (MODEL 4220)

    2 inch wide wheelchair safety belt restraint with quick release buckle.

77. POSEY SAFETY ROLL BELT (MODEL 1231)

    Cotton safety belt for bed, cotton ties wrap around waist and tie to bed. Sizes: small, medium, large and extra large.

78. POSEY SAFETY VEST, BREEZELINE WITH TIES (MODEL 3311)

    Safety vest restraint for bed or wheelchair. Mesh fabric vest, opens in front, end laces through slot for security. Long ties.

79. POSEY SAFETY VEST, COTTON PRINT WITH TIES (MODEL 3341)

    Safety vest restraint for bed and wheelchair. Cotton print fabric vest, opens in front, end laces through slot for security. Long ties. Personal care. Personal health. Restraints. Wheelchair accessories.

80. POSEY SAFETY VEST, COTTON WITH TIES (MODEL 3331)

    Safety vest restraint for bed and wheelchair. Cotton fabric vest, opens in front, end laces through slot for security. Long ties.

81. POSEY SELF-RELEASING PADDED BELTS (MODELS 4126Q & 4126V)

    The Self-Release Belt is a belt restraint designed to aid in positioning people with mobility disabilities and to prevent sliding in wheelchairs. This padded belt attaches to the back posts of a wheelchair or geri chair with quick-release ties. Model 4126V has Velcro closure and model 4126Q has a quick-release buckle. OPTIONS: Available with hook and loop or quick-release buckle release. DIMENSIONS: The belt fits waits up to 60 inches (152 centimeters). Model 4126V Pads (LxW): 13 x 4 inches. Model 4126Q Pads: 12.5 x 4 inches.

82. POSEY SLEEVED JACKET, COTTON (MODEL 3350)

    Sleeved safety jacket restraint with back zipper, for bed and wheelchair. Cotton plaid fabric, short raglan sleeves. Long ties at waist. Shoulder loops available. Adult or child sizes.

83. POSEY SOFT BELT (MODEL 4125)

    Wide foam padded belt restraint for bed or wheelchair. Long ties.

84. POSEY STRAIT JACKET (MODEL 8118)

    Restraint jacket to provide ambulatory but secure control. Canvas fabric, four straps with buckles in back. Long sleeve arms cross in front and secure in back. Crotch strap prevents pulling jacket over head.

85. POSEY SURE STAY HEEL PROTECTOR (MODEL 6125)

    The Posey Sure Stay Heel Protector, model 6125, is a heel protector designed for use by individuals at risk for pressure ulcers of the heel. This machine-washable soft protector is lined with synthetic fur, is ventilated at the ankle and heel, and has Velcro closures for a secure fit. SIZE: One size.

86. POSEY VENTILATED HEEL PROTECTOR (MODEL 6120)

    The Posey Ventilated Heel Protector with Shell, model 6120, is designed for use by individuals at risk for pressure ulcers on the heel. This model features a machine-washable synthetic fur liner for warmth and comfort and Velcro fasteners. SIZE: One size.

87. POSEY VENTILATED HEEL PROTECTOR WITH SHELL (MODEL 6110)

    The Posey Ventilated Heel Protector with Shell, model 6110, is designed for use by individuals at risk for pressure ulcers on the heel. This models features a hard plastic shell to facilitate movement over sheets while in bed, a machine-washable synthetic fur liner for warmth and comfort, and Velcro fasteners. SIZE: One size.

88. POSEY WAIST AND CHEST JACKET, BREEZELINE (MODEL 3140)

    Safety vest restraint with full torso wrap. Poncho type vest, mesh fabric, waist portion laces through itself and ties to wheelchair or bed.

89. PREMIUM ELBOW PROTECTORS (MODEL 6222)

    The Premium Elbow Protectors, model 62222, are elbow protectors designed for use by individuals at risk for skin irritation, pressure sores, or friction burns. Designed for elbow use only, these machine-washable pillows secure with Velcro straps. SIZES: One size.

90. PRESSURE RELIEF POSITIONING ROLLS (MODELS 6304, 6304SC, 6305, & 6305SC)

    Pressure Relief Positioning Rolls are body positioners designed for use by individuals at risk for pressure sores or who require positioning assistance while seated or in bed. These rolls provide full body support in lateral or dorsal positioning and the flexible construction conforms to the user's body, reducing pressure. Models 6304 and 6304SC are high density for maximum support and models 6305 and 6305SC are low density for maximum weight distribution. Models 6304 and 6305 have removable, machine-washable covers and models 6304SC and 6305SC have Staph-Chek vinyl covers.

91. PRESSURE RELIEF SLIPPERS (MODEL 6470S-M & 6470M-L)

    The Pressure Relief Slippers are slippers designed for wear by individuals with pressure ulcers of the heel. These slippers feature a sling back for air circulation, Velcro closure, synthetic fur lining, and non-skid soles. SIZES: Model 6470S-M fits women's sizes 5 to 10 and men's sizes 5 to 8. Model 6470M-L fits women's sizes 10 and above and men's sizes 8 to 10.

92. QUICK-RELEASE GAIT BELT (MODELS 6524Q, 6528Q, & 6531Q)

    The Quick-Release Gait Belt is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable cotton belt is available in standard and extra-long styles and features a quick-release buckle. DIMENSIONS: The standard belt fits 24- to 52-inch waists and the extra-long belt fits 53- to 70-inch waists. COLOR: Model 6524Q is white, model 6528Q is navy, and model 6531Q is pastel bouquet (stripe).

93. QUILTED LONG BOOT (MODELS 6113 & 6114)

    The Quilted Long Boot is a heel protector designed to minimize pressure on the heel be distributing weight evenly along the calf. The machine-washable boot, secures with three Velcro straps. SIZES: One size. COLOR: Model 6113 is blue plaid and model 6114 is solid navy.

94. SECURE TIE (MODEL 8196S/M/L)

    The Secure Tie, model 8196S/M/L, is a tracheostomy tube holder designed to secure tracheostomy tubes to prevent extubation and decannulation during coughing spasms. These Velcro foam ties have two ties for extra security. SIZES: Small (fits necks 7 to 9 inches in circumference), medium (fits necks 9 to 17 inches in circumference), or large (fits necks 13 to 24 inches in circumference).

95. SELF-ASSISTING BELT (MODEL 4220)

    The Self-Assisting Belt, model 4220, is a wheelchair seatbelt designed to reduce siding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of heavy-duty nylon, this machine-washable belt is equipped with an airline-style buckle. DIMENSIONS: Fits hips up to 60 inches.

96. SELF-ASSISTING BELT (MODELS 4228 & 4228L)

    The Self-Assisting Belt is a wheelchair seatbelt designed to reduce sliding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of polypropylene webbing, this machine-washable belt is equipped with Velcro closure. DIMENSIONS: Model 4228 fits hips up to 42 inches and model 4228L is extrsa-long to fit hips up to 62 inches.

97. SELF-RELEASING HUGGER (MODEL 6514)

    The Self-Releasing Hugger, model 6514, is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. This unit secures to the wheelchairs with Velcro loop closures which automatically release as the wheelchair user rises from the chair. This unit fits chairs with desk-length and full-length arms. DIMENSIONS: Fits wheelchairs 18 to 20 inches wide.

98. SELF-RELEASING ROLL BELT (MODEL 1135)

    The Self-Releasing Roll Belt, model 1135, is a belt restraint designed to prevent individuals with cognitive and physical disabilities from leaving bed without assistance. This machine-washable belt secures around the wearer's waist with Velcro and a quick-release buckle. The ends of the strap ties secure to the bed frame. This restraint prevents the user from leaving the bed, while allowing the wearer to roll from side to side or to sit up. SIZES: One size fits all.

99. SEMI-RIGID WHEELCHAIR FOUNDATION (MODELS 6521 & 6523)

    The Semi-Rigid Wheelchair Foundation is a foam seat cushion designed for use in wheelchairs. Designed to provide firm, level seating, this closed-cell foam cushion features a convex bottom to prevent hammocking. Model 6523 includes a non-slip vinyl protective cover. Model 6521 does not include a cover. DIMENSIONS (WxDxH): 18 x 16 x 1.5 inches.

100. SIDE RAIL WEDGES (MODEL 5708)

     The Side Rail Wedges, model 5708, are side rail pads designed to provide protection from injury from bed side rails. These wedges may be used singly to cover or close the gap between half side rails or zipped together to provide full-length protection od double half side rails, three-quarter side rails, or full-length side rails. Three pairs can be used to cover side rails and head- and footboards. These protectors are made of plush foam and covered in Staph-Chek vinyl. DIMENSIONS (LxHxD): Each Wedge is 35 x 17 x 2 inches.

101. SKIN SLEEVES (MODELS 6000, 6000S, 6001, & 6002)

     Skin Sleeves are arm and leg protectors designed for use by individuals with fragile skin, IV sites, or skin irritation. Made of soft cotton and Lycra, these machine-washable sleeves blend discretely with the skin and can be rolled to provide only the coverage required. Model 6000 is a standard arm sleeve, model 6000S is a small arm sleeve, model 6001 is a leg sleeve, and model 6002 is a padded arm sleeve. COLOR: Neutral flesh tone.

102. SLIM LATERAL STABILIZERS (MODELS 6312, 6312SC, 6316, & 6316SC)

     The Slim Lateral Stabilizers are lateral trunk supports designed to promote proper trunk alignment for wheelchair users who lean laterally. These slim bolsters are intended for use with larger or obese individuals and are available with removable, washable cotton covers (models 6312 and 6316) or Stap-Chek vinyl (models 6312SC and 6316SC). The 6312 models are designed for use with wheelchairs with desk-length arms and the 6316 models are designed for use with wheelchairs with full-length arms. DIMENSIONS: The 6312 models are 11.5 inches long and the 6316 models are 16.5 inches long. Both styles are 4 inches wide.

103. SLIM SUPPORTS (MODELS 6322 & 6323)

     Slim Supports are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs or geri chairs. Constructed of plywood and padded foam and covered in wipe-clean vinyl foam, model 6322 fits standard wheelchairs and secures with Velcro straps and model 6323 fits inside the armrests of geri chairs.

104. SOFT SEAT (MODELS 6392 & 6394)

     The Soft Seat is a seat cover for a wheelchair designed to enhance comfort and reduce pressure sores. Model 6392 is a seat and back pad set and model 6394 is a pair of armrest pads. These machine-washable sets (sold separately) are made of synthetic fur padding and fit most wheelchairs with full-length arms. The seat back pad secures to the wheelchair with loops that slip over the push handles.

105. SPLIT SIDE RAIL PROTECTORS (MODEL 5705)

     The Split Side Rail Protectors, model 5705, are side rail pads designed to provide protection from injury from bed side rails. These pads provide protection and can be used to close the gap between the half rails to deter users from exiting the bed between the rails. These foam pads are covered in wipe-clean Staph-Chek vinyl and secure to most rails with the attached Velcro straps.

106. STOP GUARD (MODEL 8209)

     Stop Guard, model 8209, is a wandering patient system designed to provide a visual warning to individuals who are disoriented or wander. This "Stop" sign affixes to doors with Velcro strips to alert individuals not to enter or exit through the marked door.

107. TORSO SUPPORT (MODEL 3656)

     The Torso Support, model 3656, is designed to prevent forward leaning for people who use wheelchairs and geri chairs. This support features a wide chest band and over-the-shoulder straps which can be fastened in the front or back with Velcro closures. SIZES: Small, medium, large, and extra extra large; the extra large and extra extra large sizes should be selected for use with geri chairs.

108. URINE BOTTLE HOLDER (MODEL 8270)

     The Urine Bottle Holder, model 8270, is designed for use by individuals with urinary incontinence or mobility disabilities. This canvas cover holds any standard urinal (not included) and can be attached to a bed or wheelchair.

109. URINE DRAINAGE BAG HOLDER / COVER (MODELS 8215, 8215V, & 8275)

     The Urine Drainage Bag Holder / Cover is a catheter collection bag cover designed for use by individuals with urinary catheters. The cover or holders hide the bag from public view. Model 8215, the Canvas Holder, and model 8215V, the Vinyl Holder, attach to bed side rails or under the wheelchair using the attached adjustable straps. The Canvas Cover, model 8275, slips over a hanging drainage bag and features a clear vinyl window to allow viewing of urine output. The machine-washable holders and cover (each sold separately) fit most drainage bags.

110. WEDGE FOAM CUSHION (MODELS 6520, 6520B, & 6520L)

     The Wedge Foam Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion gently rotates the hips back to prevent forward sliding. The Staph-Chek cover wipes clean. DIMENSIONS: Models 6520 and 6520B are 18 inches wide and model 6520L is 20 inches wide. The cushion tapers from 4 inches high in the front to 2 inches high in the back. COLOR: Model 6520 and 6520L have two-color pink and blue covers and model 6520B is blue.

111. WEDGE POMMEL CUSHION (MODELS 6522P & 6522L)

     The Wedge Pommel Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion features a pommel, promotes hip abduction and proper knee alignment, and the wedge design prevents forward sliding. The convex bottom provides a stable foundation and eliminates seat hammocking. The cushion is covered in water-repellent non-slip vinyl. DIMENSIONS: Model 6522P is 18 inches wide and model 6522L is 20 inchesw wide.

112. WHEELCHAIR LEG PANEL (MODEL 6350)

     The Wheelchair Leg Panel, model 6350, is a legrest panel designed to prevent the user's feet from sliding off the foot plates. This machine-washable synthetic fur panel attaches to most chairs with buckles.

113. WHEELCHAIR SLIPCOVER (MODEL 6393)

     The Wheelchair Slipcover, model 6393, is a seat cover for a wheelchair designed to enhance comfort and reduce pressure sores. This one-piece plush synthetic fur pad covers the wheelchair seat and back. DIMENSIONS: This pad fits most 16-, 18-, and 20-inch wheelchairs.

114. WHEELCHAIR SLIPPERS (MODELS 6480S-M & 6480M-L

     Wheelchair Slippers are foot protectors designed for use by individuals who use wheelchairs. Each of these soft plush, machine-washable slippers feature a strap on the bottom that slides over the wheelchair footplate, securing the slipper to the footplate, protecting the foot and providing a surface for the wearer to push against to stop forward sliding. SIZES: Model 6480S-M fits women's shoe sizes 5 to 10 and men's shoe sizes 5 to 8. Model 6480M-L fits women's shoe sizes 10 and up and men's shoe sizes 8 to 10. COLOR: Natural.

115. WHEELCHAIR WING BACKS (MODEL 6321)

     Wheelchair Wing Backs, model 6321, are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs. Constructed of plywood and padded in foam and covered in wipe-clean vinyl, these wings attach to the screws on the wheelchair back to provide support without taking up seating space. The angle may be adjusted to accommodate user needs. DIMENSIONS (WxL): 8 x 10 inches.

116. WRAP-AROUND (MODEL 3658S-M & 3658M-L)

     The Wrap-Around is a belt restraint designed for use by individuals with limited upper trunk control who require assistance to sit upright. This machine-washable quilted belt is placed around the chest to secure the user. The Velcro closure can be placed in front for unassisted release or in back for assisted release only. SIZES: Model 3658S-M is medium and model 3658M-L is large. DIMENSIONS: The medium model is 66 inches long and the large model is 84 inches long.

See J T Posey Company products that are no longer available.