Braillo Norway ASStorgt 31, POB 447
Telephone: 33 00 28 70.
Fax: 33 00 28 71.
Products manufactured by Braillo Norway AS (listed alphabetically)
The Braillo 200 is a Braille printer that can print six and eight dot braille at 200 cells per second. A liquid crystal display indicates the page count. Operator controls include form feed, reset, and paper stop. The printer may be connected directly to a paper cutter. The page lenths and line length are both adjustable; the maximum line length is 42 characters. DIMENSIONS: 22.62 x 25.74 x 33.93 inches. WEIGHT: 320 pounds.
BRAILLO 400 S
The Braillo 400 S is a braille printer that can print six and eight dot braille at 400 cells per second. A liquid crystal display indicates the page count. Operator controls include form feed, reset, and paper stop. The printer may be connected directly to a paper cutter. The page lenths and line length are both adjustable; the maximum line length is 42 characters. DIMENSIONS: 48.36 x 26.13 x 39.78 inches. WEIGHT: 530 pounds.
BRAILLO 400 SR EMBOSSER
The Braillo 400 SR Embosser is a Braille printer designed for use by persons who are blind or have low vision. The Braillo 400 SR Embosser reduces paper costs because it uses paper rolls up to 40 inches in diameter rather than standard continuous fanfold paper. Paper widths from four to fourteen inches are accepted. Once the paper is brailled, a built-in paper cutter cuts the paper and releases it to the stacker. When the stacker reaches its1000-sheet capacity, a sensor stops the machine so the stacked paper can be removed. A mechanical lift puts rolls of paper into place. POWER: Uses 110/220 volts, 50/60 Hertz, 7 Amps, 1500 Watts. DIMENSIONS (HxLxW): 57 x 141 x 41 inches. WEIGHT: 662 pounds.
BRAILLO 440 SW
Braillo 400 SW is a braille printer designed for use by individuals who are blind or have low vision. This printer is designed for large volume production of braille. It prints simultaneously on both sides of the paper at a rate of 440 characters per second continuous printing. It uses standard paper rolls up to one meter in diameter, and can print two or four page sheets with a maximum sheet length of 13 inches. It has a built in paper cutter and a stacking unit for handling large format brailled sheets, and it can communicate with a computer via parallel or serial ports. POWER: Uses single phase 220V (+/- 10 %), 50/60Hz. DIMENSIONS (HxLxW): 1430 x 3200 x 1900 millimeters. Width may vary depending on length of belt. WEIGHT: 301 kilos. WARRANTY: 2 years warranty on parts.