Liberty Hardware Mfg. Corp. (formerly Franklin Brass, a MASCO Company)

140 Business Park Drive
Winston Salem, North Carolina 27107
United States
Telephone: 800-542-3789 or 336-769-4077.
Fax: 336-769-1839.
Web: http://www.libertyhardware.com.

Products manufactured by Liberty Hardware Mfg. Corp. (formerly Franklin Brass, a MASCO Company) (listed alphabetically)

1. BATH SAFETY TOILET SAFETY BAR (MODEL 575)

   The Bath Safety Toilet Safety Bar, model 575, is a grab bar for toilet designed for use by individuals with balance or mobility disaibilies. This unit provides handles on both sides for use in getting on and off the toilet. Made of molded plastic tubing, it comes with adjustable mounting clamps and fits most standard and elongated toilets. DIMENSIONS (HxDxW): 8.5 x 23 x 18 inches. The tubing is 1 inch in diamter. CAPACITY: 250 pounds. COLOR: White.

2. CENTURION STAINLESS STEEL GRAB BARS

   Stainless steel grab bars. Diameters: 1, 1 1/4, 1 1/3 inches. 1 1/2 inch hand to wall clearance. Oval or round flanges, concealed or exposed mountings. Tested to withstand 1000 pounds of pull when properly installed. Straight: 12, 16, 18, 24, 30, 32, 36, 42, 48 inches.

3. FRANKLIN BRASS ADA GRAB BARS (MODEL 5736, 5742, & 5748)

   Franklin Brass ADA Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar is made of 18- gauge, type 304 stainless steel tubing with a round flange for concealed mounting. Stainless steel Philips head screws are included. DIMENSIONS: All models have an outside diameter of 1.25 inches with 1.5 inch wall clearance. The bar is available in 12, 16, 18, 24, 30, 36, 42, or 48 inches long. The flange is 3 inches in diameter. CAPACITY: 500 pounds. COLOR: Stainless steel, bright stainless steel, satin nickel, or white finish.

4. FRANKLIN BRASS SHOWER SEAT WITH PHENOLIC SLATS (MODEL 5404LH & 5404RH)

   The Franklin Brass Shower Seat with Phenolic Slats is a folding shower seat designed for use by individuals with balance or lower extremity disabilities or arthritis. This seat is made of solid phenolic resin with laminated wood grain, 14-gauge stainless steel tubing, and 12-gauge stainless steel mounting brackets. The seat folds up against the wall when not in use, and is available in left-hand (mode l5404LH) or right- hand (model 5404RH) configuration. DIMENSIONS: The mounting heightis 19 inches from the floor to the top of the seat. The seat projects 22.75 inches from the wall. The seat is 0.5 inch thick with 1.25 x 1.25 inch tubing. COLOR: Oak slats and satin stainless steel finish tubing.

5. FRANKLIN BRASS SWING UP BAR (MODEL 5215)

   The Franklin Brass Swing Up Bar, model 5215, is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. Made of 18-gauge stainless steel with a knurled gripping surface, this bar swings out from the wall and is curved to provide upper and lower gripping surfaces. It comes with a stainless steel wall retaining clip to secure its upright position. DIMENSIONS: The 1.25-inch diameter bar projects 30 inches off the wall. CAPACITY: 500 pounds.

6. FRANKLIN BRASS TUB & SHOWER SEAT (MODEL FB595)

   The Franklin Brass Tub & Shower Seat, model FB595, is a portable bath seat and shower bench designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. Fitting standard tubs and showers, this unit has a molded plastic seat on a tube frame with non-slip rubber feet. DIMENSIONS (DxWxH): Seat area is 12 x 20 x 16 inches. The leg tip spacing is 14 inches deep x 18.62 inches wide. The tube diameter is 1 inch. CAPACITY: 250 pounds. COLOR: White.

7. LIBERTY ASSIST GRAB BARS (500 SERIES)

   Liberty Assist Grab Bars, 500 series, are grab bars designed for use by individuals with balance or mobility disabilities. Bars are straight and made of chrome plated brass, polished brass, or polished stainless steel. DIMENSIONS: 9, 12, 16, 18, 24, 30, 32, or 36 inches long. COLOR: Brass, chrome, stainless steel, or white.

8. SAFETY FIRST HIGH PROFILE TUB BAR (MODEL SF580)

   The Safety First High Profile Tub Bar, model SF580, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The bars are made of tubing with a grooved surface to aid in gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. The bar is higher for use by taller individuals. DIMENSIONS (HxW): 15 x 7.25 inchess, with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

9. SAFETY FIRST LOW PROFILE TUB BAR (MODEL SF590)

   The Safety First Low Profile Tub Bar, model SF590, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. Bars have a grooved surface for secure gripping. Adjustable mounting clamps have neoprene pads to protect tub walls. DIMENSIONS (HxW): 6 x 17.25 inches with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

10. SAFETY FIRST MULTI-GRIP TUB BAR (MODEL SF585)

    The Safety First Multi-Grip Tub Bar, model SF585, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has a higher horizontal bar on one side and a lower horizontal bar on the other side, providing two levels to hold onto when getting in and out of the tub. Bars are made of plastic tubing with a grooved surface for gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. DIMENSIONS: Two 8-inch long gripping surfaces with a 1 inch diameter at 7 and 15 inches high. Mounthing clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

See Liberty Hardware Mfg. Corp. (formerly Franklin Brass, a MASCO Company) products that are no longer available.