Ossur Americas

27051 Towne Centre Drive
Foot Ranch, California 92610
United States
Telephone: 800-233-6263 or 949-362-3883.
Fax: 800-831-3160.
Web: http://www.ossur.com.
Email: ossurusa@ossur.com.

Products manufactured by Ossur Americas (listed alphabetically)

1. AIRFORM NIGHT SPLINT

   The Airform Night Splint is a night foot splint designed for use by individuals with plantar fasciitis, achilles tendonitis, drop foot, or post-static pain. The splint is lightweight and has a low profile. It slips on and fits either the left or right foot. SIZES: Medium (fits men's shoe sizes 5 to 9 and women's shoe sizes 6 to 10) or large (fits men's shoe sizes 9.5 to 14 and women's shoe sizes 10.5 to 15).

2. DH OFFLOADING POST-OP SHOE (MODELS 10340, 10341, 10342, & 10343)

   The DH Offloading Post-Op Shoe, models 10340, 10341, 10342 and 10343, is a heel and foot protector designed for use by individuals with diabetes to provide relief for decubitus ulcers. This shoe has an active offloading insole for use in treatment of diabetic foot ulcers and other plantar wound conditions. It accommodates the ambulatory and compliant patient for short-term treatment (1 to 4 months). It can be worn on either the left or right foot and can accommodate bulky dressings. The shoe has a soft nylon upper with a reinforced heel counter and a semi-rigid rocker bottom outsole. A removable toe piece aids in wound accessibility for daily wound site inspection. OPTIONS: Replacement liners. SIZES: Small (model 10340) fits men's sizes 4 through 6 and women's sizes 6.5 through 8.5; medium (10341) fits men's sizes 6.5 through 8.5 and women's sizes 6 through 11; large (10342) fits men's sizes 9 through 11 and women's sizes 12+; extra large (10343) fits men's sizes 11.5 through 14 and women's sizes 13+.

3. FLEX-FOOT MODULAR III

   The Flex-Foot Modular III is a prosthetic foot designed for use by individuals with lower extremity amputation. This lightweight prosthesis is made of 100 percent carbon fiber, and provides 95 percent energy storage and return. The prosthesis is available with a low heel or high heel. SIZES: Available in sizes 22 to 30, categories 1 to 9. DIMENSIONS: Heel height is 3/8 or 0.75 inch. This prosthetic requires 9 inches of clearance from the ground to the distal end of the socket. CAPACITY: 365 pounds. Capacity over 365 pounds is available through special order. WEIGHT: 403 grams / 14.19 ounces for category 4 prosthesis measuring 25 centimeters. WARRANTY: 36 months.

4. INNOVATOR DLX POST-OP KNEE BRACE (MODELS 423100, 423101, 423200, & 423201)

   The Innovator DLX Post-Op Knee Brace is a knee orthosis designed for use by individuals who need controlled range of motion after surgery. This multi-functional brace has adjustable hinges, a OneTouch drop lock, and a gastroc strap to limit migration. The length can be adjusted with a lever and slide-to-size struts. The brace is available in cool (models 423200 and 423201) and full softgood (models 423100 and 423101) versions. SIZES: Regular (models 423100 and 423200 for thigh circumference up to 27 inches) or extra large (models 423101 and 423201 for thigh circumference between 27 and 35 inches). Thigh circumference is measured 6 inches above mid-patella. DIMENSIONS: Length can be adjusted from 17 to 28 inches.

5. MIAMI J COLLAR

   The Miami J Collar is a cervical collar designed for use by individuals with neck and spine injuries or disabilities. Intended for long-term use, this two-piece collar has a polyethylene shell that provides rigid cervical support and immobilization in flexion, extension, lateral tilt, and rotation. The angulation of the chin and occipital portion of the collar adjusts to match the wearer's anatomy. Standard features include Sorbatex padding to absorb and wick moisture away from the skin and a vented collar shell for air circulation. All contact areas are lined with foam padding. The breathable chin and occipital pads are removable and washable. SIZES: Pediatric, stout, standard, medium, and tall. DIMENSIONS: The pediatric model fits necks 8 to 16 inches in circumference; the stout fits necks from 14 to 24 inches; the standard fits necks 10 to 20 inches; the medium fits necks 12 to 22 inches; and the tall fits necks 12 to 24 inches in circumference.

6. ORIGINAL PHILADELPHIA COLLAR

   The Original Philadelphia Collar is a cervical collar designed for use by individauls with neck or spinal cord injuries. This collar restricts cervical spine flexion, extension, and rotation to promote recovery. It is made from Plastazote foam and has anterior and posterior rigid plastic reinforcement supports to limit movement, and adjustable bilateral Velcro hook and loop fasteners. It provides total cervical arch support to maintain neutral alignment of the cervical spine. The collar has contoured shoulder supports for stability, ventilation openings to reduce heat and moisture, and a maneuverable chin support for airway management. It is latex-free, water-resistant, and X-ray, CT and MRI lucent, and can be customized for individual requirements. It can be cleaned with mild soap and water. SIZES: Infant, pediatric, and four adult ranges (O2, O3, O4, and O5), with extra small, small, medium, large, and extra- large sizes in each adult range. DIMENSIONS: Height is 1.25 inches (infant), 1.75 inches (pediatric), 2.25 inches (O2 range), 3.25 inches (O3 range), 4.25 inches (O4 range), or 5.25 inches (O5 range). Circumference is 6 to 8 inches (infant), 8 to 11 inches (pediatric), up to 10 inches (extra-small O2 to O5), 10 to 13 inches (small O2 to O5), 13 to 16 inches (medium O2 to O5), 16 to 19 inches (large O2 to O5), or 19 inches and up (extra-large O2 to O5).

7. PHILADELPHIA COLLAR (889 SERIES)

   The Philadelphia Collar is a cervical collar designed for use by individuals with neck and spine injuries or disabilities. Intended for long-term use, this collar provides moderate cervical immobilization in flexion and extension. Standard features include ease in application and adjustment and rigid front and rear struts for enhanced flexion and extension control. SIZES: Small, medium, and large. DIMENSIONS: Available in 2.25-, 3.25-, 4.25- or 5.25-inch high models.

8. POWER KNEE

   The Power Knee is a powered bionic knee prosthesis designed for use by individuals with above-knee amputation. This bionic knee replaces concentric muscle activity of the quadriceps to bend and straighten the knee. Working as an integrated extension of its user, it synchronizes motion with that of the sound leg. When walking on level ground, the user is gently propelled forward, allowing greater distances to be covered without tiring, while pelvic rotation is enhanced for a more natural gait. On stairs and inclines the knee actively lifts the user up the next step, producing a more secure and natural ascent, foot over foot. The prosthesis lifts the user when standing from a seated position. On level ground and changing terrain, the prosthesis actively lifts the heel off the ground, producing sufficient toe clearance during swing to prevent stumbling and improves user safety.

9. PROPRIO FOOT

   The Proprio Foot is a bionic prosthetic foot designed for use by individuals with lower extremity amputation. This intelligent foot module for transtibial amputees provides a more balanced and symmetric gait as it responds to changing terrain, stairs, and slopes with automatic ankle flexion. Accelerometer technology tracks the path of the ankle through space, timing gait characteristics and events, including heel strike and toe off. For each stride, the device constructs its path by continuously analyzing horizontal and vertical movement, tracing the foot as it moves through space. This trace varies according to the terrain so gait pattern recognition algorithms in the foot can detect and identify when a user is walking on flat or sloped surfaces and up or down stairs, as well as when stationary or in a relaxed position (seated). The foot is for low and moderate impact use by individuals who weigh from 45 to 116 kilograms. Seven categories are available (Category 1 through Category 7) for individuals based on their weight and whether the foot will receive low or moderate impact use. DIMENSIONS: 25 to 30 centimeters long. WEIGHT: 1,240 grams (size 27, Category 5).

10. RHEO KNEE

    The Rheo Knee is a knee prosthesis designed for use by individuals with lower extremity amputation. This knee has a microprocessor-controlled swing and stance for natural and efficient motion. High speed load cells accumulate information through the gait cycle, and this information is combined with data from the angle sensor to build up a profile of the user’s gait. Data from the sensors is received continually by a Dynamic Learning Matrix Algorithm (DLMA), which matches the live data input to stored memory of the user’s gait, analyzes changes, and instantly adapts the settings. A magnetorheological (MR) actuator changes resistance to allow for initiation of knee flexion. Through drag reduction, the prosthesis allows for more rapid foot-off velocity during pre-swing, so the pelvis remains in a more normal position for natural motion and improved walking efficiency. The unit has an aluminum frame and allows 120 degrees of knee flexion. WEIGHT: 1630 grams. WARRANTY: 36 month limited warranty, includes servicing at 15 and 30 months. CAPACITY: 220 pounds maximum.

11. ROYCE BUCKLE CLOSURE ARM SLING

    The Buckle Closure Arm Sling is designed for use by individuals with upper extremity disability or injury. This envelope-style sling has a thumb support, an adjustable strap, and buckle closure. SIZES: Extra small, small , medium,and large. COLOR: Blue.

12. ROYCE CONVERTIBLE UNIVERSAL FOAM WRIST FOREARM SPLINT.

    The Convertible Universal Foam Wrist Forearm Splint is designed for use by individuals with upper extremity disabilities. This splint converts for wear on the right or left wrist, is contoured below the palmar crease to allow 90-degree flexion, and has Velcro closures. OPTIONS: Hot/cold therapy gel pad. SIZE: Universal. DIMENSIONS: 10 inches long.

13. ROYCE ELASTIC SHOULDER IMMOBILIZER

    The Elastic Shoulder Immobiilizer is an arm sling designed for use by individuals with upper extremity disabilities.Wide cotton and elastic chest belt. Available for men and women, the Immobilizer has a padded wrist support, an upper arm support, and a contact closure chest band. SIZES: Male small, medium, large, and extra-large and female small, medium, large, and extra-large.

14. ROYCE EXCEL ANKLE SUPPORT

    The Excel Ankle Support is designed for use by individuals with lower extremity disability or injury. This ankle stabilizer has Velcro closures, medial and lateral stays, and an internal elastic sleeve. Gel pads for hot or cold therapy are also included. SIZES: Small, medium, large, and extra large based on men's and women's shoe size.

15. ROYCE FORMFIT BACK SUPPORT

    The Royce FormFit Back Support is a low back orthosis designed for use by individuals wit pain or injury. This wrap-style belt features a patented compression molded lumbar pad and flexible stays to restrict potentially harmful movement. The support can be worn with or without Velcro attachable gel pads for heat or cold therapy and the overlapping double pull strap design assists both the lumbar and abdominal areas. Rubber gripper strips keep the wrap in place and mesh panels and ventilation holes add comfort. SIZES: Small, medium, large, extra large, and extra extra large.

16. ROYCE GEL ANKLE BRACE

    The Gel Ankle Brace is an ankle support designed for use by individuals with lower extremity disability or injury. This ankle stabilizer has Velcro closures and is available in a choice of 50 percent gel and 50 percent foam or 80 percent gel and 20 percent foam. Offered for the left or the right foot, gel pads for hot or cold therapy are also included. SIZES: Pony or adult.

17. ROYCE NEOPRENE WRIST / THUMB WRAP

    The Neoprene Wrist Wrap is a volar wrist and thumb orthosis designed for use by individuals with upper extremity disabilities or injury. This splint is fabricated of 1/8 inch neoprene and is brushed nylon lined. The splint also features Velcro closures and is contoured below the palmar crease to allow 90-degree flexion. OPTIONS: Hot/cold therapy gel pad. SIZES: Universal.

18. ROYCE SPEED BRACE

    The Royce Speed Brace is an ankle support designed for use by individuals with arthritis and other disabilities of the ankle. This brace uses Exofoam technology that forms a hard plastic exoskeleton directly on soft, breathable fabric, providing the comfort and compression of a soft brace and the stability of a stirrup ankle brace. The laces provide adjustable fit and the bi-lateral design fits either foot. The padded tongue and heel add comfort. SIZES: Men's or women's shoe sizes in narrow, regular, or wide widths.

19. SMARTSLING

    SmartSling is an arm sling designed for use by individuals with arm or shoulder injuries. This sling provides abduction, external rotation, and/or immobilization. It is made from a breathable mesh base material with thermal-molded foam padding. Other features include a gussetted chamoise-covered neck pad, trimmable strapping without seams or stitches that fray, and a re-positionable thumb loop. The sling can be used on either the left or right arm. An included underarm pillow helps distribute weight over a larger surface area and decreases pressure on the ulnar nerve.

20. THERACOOL COLD THERAPY SYSTEM

    The TheraCool Cold Therapy System is a cold pack unit designed for use in reducing swelling. This system includes a 9.6 quart capacity cooler, an external pump, an insulated hose assembly, and a therapy blanket. The pump continously circulates cold water through the blanket. Temperature is adjusted using a rheostat flow control which regulates the flow of chilled water. Other features include quiet pump operation and a universal connector that fits most pad brands. OPTIONS: Blankets designed for hip, knee, ankle, shoulder, back, or hand; small and large multi-use pads; and sterile pads. WARRANTY: 90-day limited warranty.

21. UNLOADER ONE KNEE BRACE

    The Unloader One Knee Brace is a knee orthosis designed for use by individuals with osteoarthritis. It has a perforated frame, a flexible upright with a low-profile hinge, padding coated with silicone to prevent slipping or rotation, two straps with buckles, and a dynamic force control system that allows the user to manage knee pain. The brace is custom made to fit the right or left leg. with a thigh circumference of 13.5 to 26.5 inches and a calf circumference of 11 to 17 inches. It comes with a removeable liner constructed from a breathable, moisture-wicking microfiber fabric. DIMENSIONS: Braces are available to fit a thigh circumference of 13.5 to 26.5 inches and a calf circumference of 11 to 17 inches. COLORS: Liner is available in black, gray, gray/tan, grsy/pink, grey/purple, or gray/blue. WARRANTY: Components that wear with use, which include straps, liners, buckles and hinge coatings, are warranted free from defect in material and workmanship for 90 days. Aside from these wear components, the brace is warranted to be free of defects in material and workmanship for a period of 1 year.

See Ossur Americas products that are no longer available.