Aqua Glass Corporation

320 Industrial Park Drive
Adamsville, Tennessee 38310
United States
Telephone: 800-435-7875 or 731-632-0911.
Fax: 800-822-9011.
Web: http://www.aquaglass.com.
Email: csadamsville@aquaglass.com.

Products manufactured by Aqua Glass Corporation (listed alphabetically)

1. ACRYLIC SPECIAL CARE UNIT (MODEL SC4286)

   Shower bathtub of reinforced fiberglass with right or left access. Cellular inner core with reinforced polyester outer protective coating for overall rigidity. Dimensions: 41 inches wide by 38 inches deep by 84 inches high outside dimensions. Weighs approximately 185 pounds. Vinyl shower curtain. 28 inch by 18 inch L shaped grab bar mounts on valve wall and backwall 34 inches above bottom of shower. 24 inch straight grab bar mounts vertically on valve wall with bottom 36 inches from floor. Textured bottom in bathing area. Grohe thermostatic and pressure balanced chrome valve protects against fluctuation in water temperature and pressure change in water supply. Safety button in valve indicates water temperature. Separate control valve for water volume. Adjustable shower head mounts for correct positioning for standing or seated user. Options: custom grab bars, dome lights, fold-up teak wood seat, low threshold, Delta pressure balanced temperature and volume control, Alson's shower and tub fixtures. Unit incorporates a vertical mounted bar with adjustable setting to convert hand held shower to wall mounted fixed place shower head. Warranty available.

2. ACRYLIC SPECIAL CARE UNIT (MODELS SC4983 & SC4983)

   Shower with built in grab bar with right or left access. Outside dimensions: 48 inches wide by 34 inches deep by 84 inches high. Door measures 76 1/2 inches by 38 inches. Weighs approximately 195 pounds. Options: custom grab bars and dome light. Above floor rough in. Fabricated of molded reinforced fiberglass. 2 stainles steel grab bars in unit: 18 inch by 23 inch L shaped wrap aound grab bar mounted on back wall of valve wall 36 inches above bottom of shower; 24 inch straight grab bar mounted vertically on valve wall 45 inches above floor. Curtain rod and vinyl curtain installed at upper portion of side wall. Textured floor. Grohe thermostatic and pressure valve prevents fluctuation in water temperature and water pressure. Safety button in valve warns of water temperature above 100 degrees F. Separate control valve for water volume supply. Grohe hand held shower provides water flow in spray pattern. Vertical mounted bar with adjustable setting converts hand held shower to fixed place shower head. Adjustable soap dish, flexible metal water supply line hose and adjustable shower head mount for correct positioning for seated or standing user. Entry has minimum threshold after finished tile has been installed on adjoining floor. Molded seat on side wall opposite valve wall is 18 inches above shower floor. Seat dimensions: 23 inches wide at back and 26 inches wide at front. Overall front to back dimension: 15 inches. Warranty available.

3. ACRYLIC SPECIAL UNIT (MODEL SC6183)

   Shower bathtub with right or left side access. Outside dimensions: 60 inches wide by 34 inches deep by 84 inches high. Weight approximately 225 pounds. Removable teakwood seat. Fabricated of molded reinforced fiberglass. Includes 5 grab bars. Two 42 inch straight grab bars mount horizontally on back wall at 24 and 36 inches from floor. One 24 inch straight grab bar mounts vertically on valve wall with bottom 41 inches from floor. 16 inch straight grab bar mounts horizontally on valve wall 36 inches from floor. Stainless steel curtain rod and vinyl curtain attach at upper part of side walls. Unit includes tub apron of 18 inches and textured floor in shower tub. Grohe thermostatic and pressure balance valve protects against fluctuation in water temperature and pressure change in water supply. Valve incorporates safety button to warn of water temperature above 100 degrees F. Separate control valve for water volume supply. Grohe hand held shower has adjustable vertical bar that converts hand held shower to wall mounted fixed place shower head. Adjustable built-in soap dish, flexible metal water supply line hose and adjustable shower head mount enables correct positioning for standing or seated user. Options: additional grab bars, dome light, optional fixtures. Warranty available.

4. GELCOAT SPECIAL CARE UNIT (MODEL SC4883)

   Shower with built in grab bar, adjustable soap-dish and rear corner seat. Seat: 16 by 16 inches, 18 inches off shower floor. Outside dimensions: 48 inches wide by 36 inches deep by 78 inches high. Door size 66 7/8 by 43 7/8 inches. Weight approximately 140 pounds. Fabricated of molded fiberglass. One 18 inch straight stainless steel grab bar mounts vertically on valve wall 31 inches above floor bottom. One 16 inch by 24 inch L shaped grab bar mounts on back wall with long leg installed vertically and bottom leg positioned 33 inches above floor. Custom grab bars available. Stainless steel curtain rod and vinyl curtain install at upper portion of side walls. Textured non-skid bottom in bathing area. Grohe thermostatic and pressure balanced chrome valve protects against fluctuation in water temperature and pressure change in water supply. Valve incorporates safety button to warn of water temperature above 100 degrees F. Separate control for water volume supply. Grohe hand held shower provides water flow in spray pattern. Includes vertical mounted bar with adjustable setting to convert hand held shower to fixed shower head. Finished surface of polyester Gelcoat plastic. Model allows for above floor installation of waste, overflow and drainage. Shower head mount enable correct positioning of shower for standing or seated position of user. Warranty available.

5. SPECIAL CARE SHOWER UNIT (MODEL SC6060)

   Molded fiberglass shower stall accessible to wheelchairs. Fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Unit has a detachable 48 inch wide by 20 inch deep wheelchair accessible ramp, with an attached rubber mat for no-skid traction. An l8 inch wide stainless steel and teakwood fold-down seat is attached to the side wall. Five grab bars made of l 1/2 inch18 gauge stainless steel, attached with 3 by 3 inch metal mounting plates. Two 24 inch grab bars are mounted vertically on the wall above the seat, a 24 inch bar is mounted vertically on the side wall by the entrance, a 32 inch grab bar is mounted horizontally on the wall opposite the seat, and a 54 inch straight grab bar is mounted horizontally on the back wall. Unit has a Grohe thermostatic and pressure balanced valve designed to protect against fluctuation in selected water temperature. Unit has a hand held shower head with two settings for standard flow or soft water effect, which can be fixed on the vertical mounting bar to function as an adjustable height shower head. SC6060 is 64 1/2 inches wide, 60 inches deep, 79 inches high, and weighs 450 pounds. Options include additional grab bars in any dimension or location desired.

6. SPECIAL CARE SHOWER UNIT (MODELS SC4586CS & SC4186)

   Molded reinforced shower units are fabricated of fiberglass over a cellular core and a reinforced polyester outer protective coating. Grab bars are made of 1 1/2 inch 18 gauge stainless steel, mounted with 3 by 3 inch metal mounting plates. SC4586CS has two grab bars: l6 inch straight grab bar is mounted at an angle on the back wall with the lower mounting 33 inches from the floor of the unit; 24 inch straight grab bar is mounted vertically on the valve wall with the bottom of the bar 42 inches from the floor. Unit has a Grohe thermostatic and pressure balanced valve, designed to protect against fluctuation in water temperature. Hand held shower has two settings for standard flow or soft water effect. Can be fixed on the vertical mounting bar to function as an adjustable height shower head. SC4186 includes many of the same features described above but is made with a molded L-shaped seat on the corner opposite the valve wall. Two grab bars: 28 by l8 inch L-shaped wrap-around bar mounted on the valve wall and back wall, 34 inches above the bottom of the shower, and a 24 inch straight bar mounted vertically on the valve wall, with the bottom 36 inches from the floor. SC4586CS is 48 inches wide, 34 inches deep, 84 inches high and weighs 175 pounds. SC4186 is 41 inches wide, 38 inches deep, 84 inches high and weighs 185 pounds. Options: dome light and additional grab bars. Can be ordered with valve placement on right or left side.

7. SPECIAL CARE TUB AND SHOWER UNIT (MODEL SC6083)

   Molded reinforced fiberglass bathtub and shower unit is fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Equipped with four grab bars, secured from the rear with a 3 by 3 inch metal mounting plate. Two 32 inch straight grab bars are mounted horizontally on the flat back wall at heights of 21 and 29 inches from the tub floor. One 24 inch straight grab bar is mounted horizontally on the valve wall 29 inches above the tub floor, and a 12 inch straight grab bar is mounted at approximately the same height on the wall opposite the valve wall. Unit has an 18 inch high front tub apron and features a textured non skid bottom in bathing area. Has a Grohe thermostatic and pressure balanced valve designed to protect against fluctuation in selected water temperature. Hand held shower has two settings for standard flow or soft water effect, which can be fixed on the vertical mounting bar to function as an adjustable height shower head. Overall dimensions: 60 inches wide by 32 inches deep by 78 inches high. Weight 165 pounds. Option: additional grab bars in any dimension or location desired. Can be ordered with valve placement on right or left side.

See Aqua Glass Corporation products that are no longer available.