RolControl Products

To the best of our knowledge, this company no longer sells assistive products. We list inactive companies for reference purposes only. The contact information listed is the last known for this company; current contact information is not available. If you have updated information on this company, please contact AbleData.

Discontinued products manufactured by RolControl Products (listed alphabetically)

1. 4007 RECLINER CONTROLLER (MODEL TCS-14940)

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Variable speed controller for power reclining systems. Can power any 24 volt recliner motor. "Soft" start and stop and finite speed control. Operation by remote toggle ($95), headrest, or tapeswitches ($81). Circuitry designed to self-protect and indicate faults. Provides safety kill switch interconnection when used in conjunction with 805 system boards. Provided with easy connect wiring and instructions. Has also been sold under MED and Abbey Duratech names.

2. 805 POWER CHAIR CONVERSION SYSTEM

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Replacement components allow conversion of Everest and Jennings 3P, 3V, and 3W motor control modules to system which allows control by users with limited dexterity. Easy speed setting adjustments at on/off mode selector or programmed on circuit board. Momentary or latching operation. Sip and puff option in latched mode, allowing driving and environmental control operation by soft and hard sips and puffs. Environmental control unit optional interface plugs directly into MED Microdec control. Safety circuit for emergency stopping. Attendant control option can be mounted to push handles. Special module cover replaces original cover and has necessary openings for the conversion system cables and components.

3. LAYDOWN ARM SUPPORT MECHANISM (MODEL TCS-14997)

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Parallelogram type arm design stays parallel with seat as wheelchair back is reclined. Entire arm base will slide forward and backward and can be easily locked into any position on the support. 90 degree pivot below the forearm can be locked into any position or left free to rotate. Easily installed on Everest and Jennings Marathon wheelchair. Compatible with both Rol Control power recliner systems, as well as other power recliners now available. Base fits into the armrest sockets, arm support clamps onto wheelchair backposts. Base will accept most arm troughs available. Sturdy lightweight aluminum construction with black anodized finish. Quick release at rear allows easy removal. Available with mount for joystick.

4. LIGHT TOUCH CONTROL (MODEL 1600)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Powered wheelchair controller interfaces with Everest and Jennings 5M control module, plugging in to replace joystick. Allows use of light touch short throw proportional or microswitch joystick, or sip and puff control to control drive and accessory functions of chair. With microswitch and sip and puff allows selection of 3 preset speeds and latching control or cruise mode in drive. Accessory functions include power recliner, motorized headrest or swing arms, attendant alarm, interface with environmental control functions. Has internal fault diagnosis which can be connected directly to Rol Control factory by modem for diagnosing problems.

5. MANUAL SWING ARM (MODEL TCS-15220)

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Adjustable positioning arm for mounting compact joystick, sip and puff control, or standard control box to power wheelchair. Allows placement of control in midline or for chin or head control. Pivots behind shoulder to swing out of the way for transfers. Positive locking mechanism and easy breakaway for safety. Mounting bracket clamps onto 7/ 8 or 1 inch diameter frame tubing or screws into multi-mount adapter. Wiring or tubing can be run through arm.

6. MICRO JOYSTICK

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Compact microswitch joystick to be used in conjunction with Rol Control power wheelchair controllers. Light touch short throw action. Round base fits into Rol Control joystick clamps.

7. POWER MECHANICAL RECLINER (MODEL TCS-14450)

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Kit to convert standard manually reclining back on Everest and Jennings Marathon power wheelchair to power recliner using standard backpost assembly. Can be used with standard seat and back upholstery or ordered with solid seat base and/or contoured back. 24 volt linear actuator powers back and elevating legrests. Leglifts are tied into system with ball detent pin for easy removal. Recliner controller and switches ordered separately. Can be factory installed or installed in kit form by local dealer. Chair frame should be braced for added rigidity.

8. POWER RECLINING WHEELCHAIR SYSTEM (MODEL TCS-14800)

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Power reclining back using PVA "No Shear" hinge design. 24 volt linear actuator powers back and elevating legrests. Available for Everest and Jennings and Invacare reclining power wheelchairs in 16 and 18 inch widths. Back height from 18 to 26 inches. Easily locking and removeable legrest links with optional height and motion delay for elevating legrests. Standard seat and back upholstery can be used, or can be ordered with solid seat base and/or solid contoured back. Can be factory installed or installed in kit form by local dealer.

9. PROPORTIONAL JOYSTICK

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Compact proportional joystick to be used in conjunction with Rol Control power wheelchair controllers. Light touch short throw action. Round base fits into Rol Control joystick clamps.

10. REMOVEABLE BATTERY POWER SYSTEM (MODEL TCS-15327)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Replacement battery tray for Everest and Jennings Marathon reclining power wheelchair frame allows easy battery installation and maintenance. Holds two group 27 deep cycle batteries up to 12.8 inches wide by 14.6 inches long by 10 inches deep. Compatible with Rol Control power reclining systems as well as others now available. Requires cross brace removal and rigid frame kit for proper installation. Includes all wiring necessary to connect to the controller on the wheelchair, with quick connect battery terminals. Easy slide and roll assembly completely disengages from wheelchair frame for battery maintenance. Connection is made by self docking drawer slide, with connectors mounted to the wheelchair frame and the battery box. Lifting mechanism functions as anti-tipper. Formed plastic cover protects batteries from moisture. Steel battery box retains fluid spills from batteries. Order box and rigid frame kit for 16 or 18 inch width chair. Specify wiring harness for 3P, 3V, 3W, or 5M controllers.

11. SIP AND PUFF CONTROL OPTION

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Sip and puff breath control to be used in conjunction with Rol Control power wheelchair controllers. Operates like microswitch joystick using soft and hard sips and puffs to control the drive and accessory functions. Cruise mode on controller allows sip and puff to accelerate to any desired speed then hold that speed when released, making only course corrections when necessary.

12. SLIDING ARM SUPPORT (MODEL TCS-14375)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Retrofit armrest allows arm support to slide as back of wheelchair is reclined. Slide tube fits into standard Everest and Jennings adjustable height armrest base and is pinned into place. Arm support clamps onto wheelchair backpost and slides over and down the arm frame tube. Arm support tube is rectangular steel providing a level base for the arm trough. Mounting slots will accept the Rol Control trough as well as others now available. Quick release at rear pivot allows easy removal. Available with mount for joystick.

13. TAPE SWITCH

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Switch with vinyl covered flexible spring for remote operation of power reclining back. Light pressure against switch placed on flat surface or bending of switch activates closure. Connects to Rol Control power recliner controllers with modular phone plugs.

14. TOGGLE SWITCH

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Switch with short protruding lever for remote operation of power reclining back with hand or chin. Includes mounting bracket. Connects to Rol Control power recliner controllers with modular phone plugs.

15. WHEELS OFF QUICK RELEASE AXLE SYSTEM

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Kit to allow any Everest and Jennings fixed or detachable arm manual wheelchair to have wheels easily removed for folding, transporting, or storage. Body block attaches to frame at axle mount location, replacement axle is secured to wheel. Telltale alarm spring warns if wheel is not properly locked in position.

16. WIDE STANCE ARM BRACKETS (MODEL TCS-14090)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- Offset socket and tube allows the front of standard wheelchair armrests to be angled out by one inch on each side. Provided with Allen wrench necessary for installation. Allen screws attach part to armrest base and offset tube sits in normal socket. Does not affect armrest height. Available to fit Everest and Jennings or Invacare conventional steel frame wheelchairs.

Discontinued products distributed by RolControl Products (listed alphabetically)

1. CELEBRITY

   --- DISCONTINUED. (Verified 01/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Celebrity is a three-wheeled scooter or powered wheelchair alternative designed for indoor and outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 46 x 24 inches with a turning radius of 34 inches and a ground clearance of 4.25 inches. The wrap-around heavy-duty steel frame includes anti-tip wheels and disassembles without tools for transport and storage. The body features fenders and covered battery and storage areas and is available in blue or red. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-wheel drive transaxle. SEAT (WxDxH): 17 x 17 x 17 inches. Custom seat dimensions are available. The orthopedically- designed padded seat swivels 360 degrees and the seat height from the scooter floor adjusts from 16.5 to 20.5 inches. UPHOLSTERY: Fawn or burgundy vinyl or fabric. ARMRESTS: Flip-up, padded armrests are width-adjustable. BRAKES: Electronic disc brakes. WHEELS: 4 x 9 inch front wheel and two 4 x 10 inch rear wheels with gray pneumatic tires. Flat-free tires and hubcaps are optional. OPTIONS: Front and rear lights, front and rear baskets, dust cover, crutch holders, and others. POWER: 24-volt direct current output motor using 2 removable sealed lead acid U-1 type batteries. A built-in on-board battery charger is included. SPEEDS: Maximum forward speed of 5.25 miles per hour with a range of 25 miles and a climbing capacity of 15 degrees. Reverse speed is 60 percent of the forward speed. The unit includes an electronic speed control. CAPACITY: 300 pounds. WEIGHT: The rear section weighs 45 pounds, the seat weighs 23 pounds, and the base and tiller weigh 33 pounds. WARRANTY: The manufacturer offers a limited three-year warranty on this product; an additional warranty is available at an extra charge.

2. FOUR-WHEEL CELEBRITY

   --- DISCONTINUED. (Verified 01/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Four-wheel Celebrity is a four-wheeled scooter designed for indoor and outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 46 x 24 inches with a turning radius of 34 inches and a ground clearance of 4.25 inches. The wrap-around heavy-duty steel frame includes anti-tip wheels and disassembles without tools for transport and storage. The body features fenders and covered battery and storage areas and is available in red or blue. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-wheel drive transaxle. SEAT (WxDxH): 17 x 17 x 17 inches. Custom seat dimensions are available. The orthopedically- designed padded seat swivels 360 degrees and the seat height from the scooter floor adjusts from 16.5 to 20.5 inches. UPHOLSTERY: Fawn or burgundy vinyl or fabric. ARMRESTS: Flip-up, padded armrests are width-adjustable. BRAKES: Electronic disc brakes. WHEELS: Two 4 x 9 inch front wheels and two 4 x 10 inch rear wheels with gray pneumatic tires. Flat-free tires and hubcaps are optional. OPTIONS: Front and rear lights, front and rear baskets, dust cover, crutch holders, and others. POWER: 24-volt direct current output motor using 2 removable sealed lead acid U-1 type batteries. A built-in on-board battery charger is included. SPEEDS: Maximum forward speed of 5.25 miles per hour with a range of 25 miles and a climbing capacity of 15 degrees. Reverse speed is 60 percent of the forward speed. The unit includes an electronic speed control. CAPACITY: 300 pounds. A special option increases capacity to 400 pounds. WEIGHT: The rear section weighs 49 pounds, the seat weighs 23 pounds, and the tiller and base weigh 39 pounds. WARRANTY: The manufacturer offers a limited three-year warranty on this product; an additional warranty is available at an extra charge.

3. RANGER X, M3900 SERIES

   --- DISCONTINUED. (Verified 5/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Ranger X M3900 Series is a powered wheelchair for adults and children. FRAME: Chrome moly and steel frame. SEAT DIMENSIONS: Seat widths are 14, 16 or 18 inches; seat depth is 16 or 18 inches; back height is 12 to 20 inches. ARMRESTS: Full or desk length armrests, fixed or adjustable height. FOOTRESTS: Swing-away, removeable footrests. WHEELS: 20-inch rear wheels with pneumatic tires. CASTERS: 8-inch front casters with solid or pneumatic tires. CONTROLS: Proportional joystick control. Tremor damping control. BRAKES: Dynamic brakes. OPTIONS: Reclining back, elevating footrests, joystick extensions, solid seat. CAPACITY: Maximum occupant weight capacity is 250 pounds. SPEED: Maximum speed is 5 miles per hour with a range of 25 miles. BATTERIES: Two 12 volt batteries. Battery charger included. WEIGHT: 180 pounds including batteries.

4. RASCAL CONVERTABLE

   --- DISCONTINUED. (Verified 01/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Rascal Convertable is a three-wheeled scooter or powered wheelchair alternative designed for use by people with physical disabilities or who have limited mobility. All models include rear carry-all baskets, removable adjustable swivel handlebar, on/off key switch, and a voltmeter/fuel gauge. Models 260, 265, 280, 285, 290, and 295 include removable front baskets. FRAME: All models are equipped with a die cast aluminum, take-apart convertible frame which allows the units to be changed to a four-wheel powered wheelchair, side and rear anti-tippers, and soft-ride spring suspension. Model 250 includes a deluxe rear section and a four-wheel front section; Model 255 includes a heavy-duty rear section and a heavy-duty 4-wheel front section. Model 260, 265, 280, and 285 include both the 3- and 4-wheel front sections; Models 265 and 285 include the heavy-duty rear section and Models 260 and 280 include the deluxe rear section. Model 270 includes the deluxe rear section and the 4-wheel front section; Model 275 includes the heavy-duty rear and heavy-duty 4-wheel front sections. Models 290 and 295 include the deluxe rear section and the 3- and 4-wheel standard front sections and the heavy-duty 3-wheel front section. Model 295 also includes the Quantum 4-wheel front section (see also separate entry for the Quantum 400). The basic model, Model 250, is 41.5 inches long and 23.5 inches wide with a wheelbase of 20 inches and a turning radius of 27 inches. CONTROLS: Models 280, 285, 290, and 295 include the double-jointed folding tiller for use on the 4-wheeler and the standard tiller with universal one-hand controls. Other models include the standard tiller with universal one-hand controls; the double jointed tiller is offered as an option. Other options are the curved tiller, the ConvertAble 4-wheeler dash with a modified tiller for two-handed steering by those with limited upper body strength, a joystick for the 4-wheeler, and a foot control for starting, stopping, and speed. Another option that fits all Rascal ConvertAbles is a joystick that provides one finger operation of speed and steering. REAR-WHEEL DRIVE: All models have a sealed, removable rear-wheel direct drive transaxle; Models 290 and 295 include the heavy-duty version. SEAT: The stanard seat on all models is a folding, padded swivel seat with an adjustable seat post. The seat adjusts in height to 20, 20.75, or 21.5 inches. Models 270, 275, 280, 285, 290, and 295 come standard with a 5-inch electric seat lift; the lift is available as an option on the other models. A high-back seat with lumbar support and an adjustable headrest and an extra-wide seat are available. CUSHION: An optional Bye-Bye Decubiti natural rubber air cushion is available with or without a fleece cover. UPHOLSTERY: Gray vinyl. A removable, machine-washable velour seat cover is available. ARMRESTS: Padded fixed armrests are standard. Padded lift-up armrests are included with the extra-wide seat. BRAKES: All models include a regenerative braking system and an automatic parking brake with manual release. WHEELS: Models equipped with the deluxe rear section have 9-inch rear wheels with non-marring foam-filled tires. Models with the standard 3- and 4-wheel front section have 8-inch wheels with non-marring foam-filled tires. Heavy-duty rear sections have 10-inch wheels and heavy-duty front sections have 9-inch wheels. OPTIONS: Removable cane and crutch holder, headlight, two rear tail lights (headlight package required), weather and dust cover, removable supermarket shopping basket, walker holder, oxygen tank holder, shoulder harness/lap seat belt, lap seat belt, coiled cable and lock security system, 6-foot extension cord for battery charger, safety flag, removable surrey top, Caboose Tag-along Cart (for second rider), Handy Kart Collapsible Cargo/Storage Trailer, rear view mirror, PowerStar charger/converter (permits battery charging using an automobile cigarette lighter), and adjustable legrests. POWER: Two removable gel cell batteries. The units include a built-in battery charger. SPEEDS: Maximum speed 5 miles per hour with a maximum range of 20 miles and a climbing capacity of 25 per cent (14 degrees). All models include variable electronic speed control. CAPACITY: Maximum capacity is 400 pounds. WEIGHT: Model 250 weighs 128.5 pounds with batteries and 84.5 pounds without batteries. The heaviest piece when disassembled is 29.5 pounds. WARRANTY: The manufacturer offers a lifetime frame warranty and a limited warranty on other parts and components for one year from the date of delivery. Batteries are covered by a one-year pro-rated warranty.

See RolControl Products products that are currently available.