Freeman Manufacturing

900 W. Chicago Road
Sturgis, Michigan 49091
United States
Telephone: 800-253-2091 or 616-651-8248.
Fax: 800-894-8248.
Web: http://www.freemanmfg.com/.
Email: freeman@freemanmfg.com.

Products manufactured by Freeman Manufacturing (listed alphabetically)

1. ARALON STOCKINETTE DISPENSER (MODEL 79100)

   The Aralon Stockinette Dispenser (25 yd. roll), model 79100, is a prosthetic aid designed to provide superior impact quality, fatigue resistance and thermal stability with little change in dimension over normal temperature changes. Constructed from Kevlar, this stockinette is designed to be 2 and a half times superior in ratio of fiber strength to weight as compared to fiberglass. Available in 2, 3, 4 and 5 inch widths, this product is compatible with both polyester and epoxy.

2. COTTON STOCKINETTE DISPENSER (MODEL 79300)

   The Cotton Stockinette Dispenser, model 79300, is a prosthetic aid made from 100% natural long staple length cotton with special rib knit designed for maximum stretch. Available in 2, 3, 4, 5, 6, 8, 10 and 12 inch widths.

3. MULTI-SIZE NYLON STOCKINETTE DISPENSER MODEL 79200

   The Muti-Size Nylon Stockinette Dispenser, model 79200, is a prosthetic aid ideal for use as a final layer of fabricating and for vacumn forming of orthotic devices. Designed with a nonrun construction and optimal smooth finish, this stockinette accommodates circumferences from approximately 6 to 22 inches. It is also made for rapid size changes without fear of folds or creases. It is constructed of white jersey knit 100 percent cotton. Available in 3 and 4 inch widths.

4. NYLON STOCKINETTE DISPENSER (MODEL 79400)

   The Nylon Stockintte Dispenser, model 79400, is a prosthetic aid designed with a fine gauge, 100 percent virgin nylon for performance elasticity and a smooth finish. Available in 2, 2.5, 3, 4, 5, 6, 8 and 10 inch widths.

5. PROSTHETIC SHEATH (MODEL 79000)

   The Prosthetic Sheath, model 79000, is designed with an open mesh construction which conforms to shape while allowing for needed ventilation. Made of stretchable nylon and polyester, it is designed to prevent any looseness that might cause soreness or discomfort. The top area of the sheath is designed with a turned welt construction intended for added strength while the toe area is reinforced. White in color, it is available in three lengths for below the knee application. SIZES: Short (10-14 inches); Medium (16-20 inches); Long (22-26 inches).

6. STUMP SHRINKER (MODELS 74012 & 74013)

   The Stump Shrinker is a hyperbaric sleeve for the post-operative phase of individuals who have had a limb amputated. Designed primarily for below knee application, model 74012 is 8 inches long, and model 74013 is 12 inches long. MATERIALS: The sleeve is 80 percent nylon, 20 percent rubber. SIZE: Sized according to residual limb circumference at midpoint of shrinker length: Small for 10 to 12-inch diameters, Medium for 12.5 to 14.5-inch diameters, Large for 15 to 17-inch diameters, and X Large for 17.5 to 20-inch diameters. COLOR: Beige.