Self-Care, Inc.

To the best of our knowledge, this company no longer sells assistive products. We list inactive companies for reference purposes only. The contact information listed is the last known for this company; current contact information is not available. If you have updated information on this company, please contact AbleData.

149 Marion Drive
West Orange, New Jersey 07052
United States
Telephone: 800-341-1950.
Web: No known web address.

Discontinued products manufactured by Self-Care, Inc. (listed alphabetically)

1. ADJUSTABLE HEIGHT BATH BENCH (MODELS B1 15 & B1 16)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height bath bench. Double walled tubular aluminum frame, rubber tips, built in seat hand grips. Height from 21 to 14 inches. Available with contoured backrest with hand grips.

2. ADJUSTABLE HEIGHT TOILET SEAT (MODEL B1 8)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height toilet seat. Cushioned and contoured seat, rubber padded locking mounting brackets and removable splash guard. Height adjustable from 4.5 to 6 inches.

3. ADJUSTABLE SUPPORT ORTHOPEDIC SEAT (MODEL B2 15)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support seat. Adjustable crossbar behind the seat supports curve of back with spring action design, spring steel frame, firm foam padding and removable velour cover. Width 15 inches. Depth 14 inches. Height 18 inches.

4. ADJUSTABLE TOILET SUPPORT RAILS (MODEL B1 7)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height toilet safety frame. Chrome plated heavy gauge tubular steel frame bolts to toilet. Arm rests, rubber tipped legs. Five levels of adjustment from 26 to 30 inches high. Width 22 inches.

5. ARTHRITIS MITTENS (MODEL T1 22)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cuffed mittens with thermoelastomer lining to provide moist heat for an hour. Heat mittens in oven or hot water. Durable, leak proof and washable.

6. ARTHRO PAD JOINT SUPPORTS (MODEL T1 8)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Padded supports for elbow or knee. Foam interlined tubular grip bandages, double thick on one side, thin on the other for ease in bending. Washable. Sizes small to extra large.

7. ARTHRO SEAT (MODELS B1 24L & B1 24 R)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Elevated toilet seat with sloped side for use with extended leg. Storage or carrying case. Height 4 inches. Right or left side slope.

8. AUTOLET (MODEL 2790 M1 14)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Painless finger puncture device. Automatic depth control and spring activated release. Fits in purse of pocket. Includes AUTOLET, 10 platforms and 10 disposable MONOLET lancets in carrying case.

9. BACKMATE LUMBAR SUPPORT (MODEL B2 20)

   --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support cushion covered with simulated fleece. Contoured. Elastic strap to fasten to back of chair.

10. BATH PILLOW (MODEL B1 13)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Inflatable bath pillow with suction cups for placement. Dimensions 9 by 18 inches.

11. BATHTUB SECURITY RAIL (MODEL B1 6)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Multiheight bathtub grab bar with 3.5 by 6 inch clamps. Horizontal grip heights 7 and 15 inches. Width 17 inches.

12. BIO CURVE PEN (MODEL M2 31)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Contoured pen. Non slip suede like finish with 19 degree angle in thicker than average shaft.

13. CANE AND CRUTCH HOLDER (MODEL M2 9)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Crutch or cane holder. Spring loaded clip to hold cane or crutch. Hangs on table or wedged to underside of table.

14. CATHETER TUBE HOLDER (MODEL D1 11)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Legband holder for indwelling catheter. Woven stretch hypoallergenic material, Helanca lining, locking device for tube, velcro closure for infinite size adjustment. One size fits all.

15. CONTOURED TURNING HANDLE (MODEL M2 29)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Device with large lever handle that turns any knob or switch up to 1 3/ 8 diameter. Rigid plastic pins inside head adapt to shape of knob. Handle length 3.5 inches.

16. DELUXE BLANKET SUPPORT (MODEL S3 9)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Blanket support allowing feet to move freely under the bedcovers. Two folding arms with wings elevate to hold blankets up at foot of bed. Installs between mattress and box spring; fits all beds.

17. DIGNITY DISPOSABLE PANTS (MODEL D1 6)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Highly absorbent disposable pants for incontinence. One size adjusts with tapes to fit all. Package of 10.

18. EASY GRIP BUTTON LOOP (MODEL M2 15)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- One hand operated button fastener. Loop passes through buttonhole, over button and pulls button through hole, similar to a needle threader. Consists of wire loop, 5 inch plastic handle and sliding finger rings for easy grip.

19. ELECTRO WARMTH BED WARMERS (MODELS S3 23A, S3 23B, S3 23C, & S3 23D)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electric bed warmer pad used over the mattress, under bottom sheet. Dual automatic comfort control thermostats, one control for single size.

20. ELEVATED TOILET SEAT (MODEL B1 1)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Elevated toilet seat. Portable, contoured non slip design, open front and recessed hand grip. Height 4 inches.

21. EVERYTHING TABLE (MODEL A1 1)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable table. Adjusts in height from 7 to 18 inches and in angle from 0 to 180 degrees. Includes elastic straps to hold books, two aluminum legs, wipe-clean walnut finish, left and right adjustment, tip resistant to 40 pounds, full width bottom lip. Top dimensions 12 by 18 inches. Folded dimensions 3 by 18 by 18 inches.

22. EXTENDA SHOE HORN (MODEL S2 18)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Long plastic shoehorn with loop handle for use while standing. Length 17.5 inches.

23. EZ STAND MOBILE STOOL (MODEL T1 36)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height mobile stool. Consists of padded bicycle seat on top of 3 legs with 360 degree casters. Height adjusts from 27 to 34 inches to allow a near standing position while approximately 90 percent of body weight is supported by stool. Alloy construction, enamel finish.

24. FEMALE URINAL (MODEL D1 16)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Female urinal, flat sides, large easy grip handle, ounces and CCs marked on side. Capacity 35 ounces.

25. FISHER CANE (MODELS M2 3L & M2 3R)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Palm fitting, molded handle on straight cane. Distributes weight over palm area. Anodized aluminum 36 inches long. Order right or left.

26. FOOD BUMPER (MODEL S2 19)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Curved food guard keeps food from sliding off plate. Snaps on regular dinner plate 9 to 11 inches in diameter. Plastic. Dishwasher safe.

27. HANDS FREE TELEPHONE HOLDER (MODEL M2 21)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telescopic swivel arm attaches to back of table phone to hold receiver. Nickel plated. Special switch answers call; doesn't echo like a speaker phone. Fits all table and desk phones except slim line or princess.

28. HIGH FOAM SLANT (MODELS S3 7 & S3 8)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Firm urethane foam wedge to elevate torso and head or legs. Two sizes: 24 inches wide, 27 inches long and either 7.5 or 10 inches high. Includes zippered percale cover.

29. JACKSON CERVIPILLO (MODEL SE 1), CERVIPILLO COVER (MODEL S3 2) & COMPANION PILLOW (MODEL S3 5)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cylindrical pillow contoured to support cervical spine. Filled with polyester fibers. Diameter 7 inches. Length 17 inches. Cover has zippered closure. COMPANION PILLOW is washable silicone treated polyester, medium density, standard size.

30. KEY HOLDER (MODEL M2 22)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Large key holder, firm grip and extra leverage. Holds 4 keys, dimensions 5/8 by 1 by 3 inches.

31. KNIT HEEL AND ELBOW PROTECTORS (MODEL S2 1)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Circular knit shell covers pressure pad of 1 inch thick no bunch poly foam to protect heels and elbows. Allows air and circulation to tissues. One size fits all, washable.

32. KNURLED GRAB BAR (MODEL B1 4)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Grab bar with non skid finish. Length 16 inches.

33. LAP DESK (MODEL M2 20A) & EXTRA LARGE LAP DESK (MODEL M2 20B)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lap desk. Hard board surface, handle, pellet filled cushion on back, attached clip and pencil holder. Dimensions 12 by 16; extra large 16 by 19 inches.

34. LIFT CUSHION WITH FOAM CASING (MODEL S3 15)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Knee support cushion for use in the supine position. Washable foam casing. Dimensions 9 by 27 inches. Optional washable zippered cover.

35. LONG HANDLED BATH SPONGE (MODEL M2 13)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Bathsponge on 20 inch handle. angle of two by four inch sponge adjusts with thumb nut.

36. LUMBAR BACK SUPPORT (MODEL B2 14)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height lower back support cushion. Steel bar lowers to raise cushion up to 5 inches above seat. Contoured molded foam, velour cover, fastening elastic strap. Dimensions 13 by 14 by 3.5 inches.

37. MAGNETIC E Z REACH (MODEL M2 11)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with magnetic tip. Scissor design of 5 ply birch with magnetic tips can pick up small or large objects. Length 27 inches. Voluntary closing.

38. NINETY DEGREE GRAB BAR (MODEL B1 5), 32 INCH STRAIGHT GRAB BAR (MODEL B1 9), & 16 INCH GRAB BAR (MODEL B1 10)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Chrome plated steel 1.25 inch diameter grab bars with high impact plastic mounting brackets. 4.25 inches wall clearance. Angled grab bar has 25 inches vertical, 20 inches horizontal support.

39. NONSTOOP DUSTPAN AND BRUSH SET (MODEL M2 27)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Long handled dustpan and long handled brush. Dustpan is rubber edged, 28 gauge steel and has 30 inch hardwood handle.

40. OAK HAND RAIL (MODEL M2 23)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Oval shape solid oak handrail on chrome wall mounting brackets. Three feet by 2 by 1 5/8 inches.

41. OVERBED TABLE (MODEL T1 29)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable overbed table on H frame; 4 ball bearing casters. Will hold portable TV. Formica top, 15.25 by 22.5 inches. Tilts 0 to 180 degrees with adjusting knob. Maximum height 35 inches. Folds to 4 inches deep for storage.

42. OVERDOOR SHOULDER EXERCISER (MODEL T1 16)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Portable shoulder exerciser with pulley device. Pulley clamps to top of door; rope through pulley has handle at either end allowing one arm to pull the other up.

43. PEDLER EXERCISER (MODEL T1 23)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Bicycle pedals on a floor supported tubular steel frame. User sits in chair or in bed. Foot straps, heavy duty pedals and tension adjusting knob. Top petal height 12.5 inches.

44. PLAYING CARD HOLDER (MODEL T1 7)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Plastic card holder. Stable design, cards easy to move. Length 15 inches.

45. QUICK WRAP (MODEL T1 11)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Stretch wrapping for gentle compression with reusable cold pack and velcro closure. For use on any part of the body.

46. REACHING AID (MODEL M2 18)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with trigger grip, magnet on tip, lightweight and precise grasp. Length 32 inches. Voluntary closing.

47. RECTANGULAR BIFOCAL MAGNIFIER (MODEL M3 2)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Rectangular bifocal magnifying glass. Three times magnifier has bifocal lens with 6 times magnification in the corner. Offset handle, sturdy plastic frame, lens area 2 by 4 inches.

48. REGULAR DIGNITY PANTS (MODEL D1 2)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Brief style underwear for incontinence. Washable, polyester knit fabric, adjustable waist band and leg openings, pocket with stay dry lining for absorbent pad. Leakproof backing and disposable pads. Uses DIGNITY pads, D1 5 or D1 7.

49. RELAX A BAC (MODEL B2 4)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support cushion, contoured to shape of back. Padded.

50. RING CUSHION (MODEL P2 1)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Molded foam ring cushion. Washable plaid fabric cover. Dimensions 14 by 16 by 2.5 inches.

51. SACRO BRACE WITH THERMO PAD (MODEL B2 5)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support brace. Elastic band, velcro closure, removable heat pad to reflect body heat, adjustable bands for custom fit. One size.

52. SCRUB PALS (MODELS S2 16 & S2 17)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Sponges on 22 inch plastic handle. Round or rectangular shape.

53. SLIP NOTS (MODELS S2 32 M & S2 32L)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adult terry sock with raised non slip dots on bottom. Machine washable. Medium sizes from 7 to 11, large from 11 to 14.

54. SOCK AID (MODEL M2 25)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Device allowing user to put on socks without bending. Thin polyethylene sheet is folded and inserted into sock. Sheet spreads sock; foot slips over sheet into sock. User pulls on long cloth tapes attached to sheet with grommets and sock slips on.

55. SOMAFLEX (MODEL B2 18)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Knee support cushion for use in supine position. Half cylinder shaped pad slips between mattress and box spring to support knee in semi flexed position. Length 26 inches.

56. STANDARD CONTOUR PILLOW (MODEL S3 25) & TRAVEL CONTOUR PILLOW (MODEL S3 26)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Contoured pillow to support cervical spine. Egg carton foam, center cutout for neck, zippered cotton cover. Standard size 14 by 21 inches; fits into standard case. Travel size 14 by 16 inches.

57. STOCKING AID (MODEL M2 24)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Device allowing user to put on stockings without bending. Consists of thin polyethylene sheet, garters and long cloth tapes attached to sheet with grommets. Sheet is rolled and placed in toe; garters are attached to the top of stocking. Sheet spreads stocking; foot slips over sheet into stocking. User pulls on tapes and stocking slips up leg to within arm reach.

58. SUCTION BASE EXTENSION MIRROR (MODEL B1 11)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Mirror with telescoping arm, suction base. Regular and magnifying 5 mirrors adjust to 33 inch height, 4.5 inches diameter. Folds for travel; carrying case included.

59. THE PILLOW (MODELS SE 22S & FIRM SE 22F)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Contoured pillow to support cervical spine. Depressed center section, rolled front edge and removable, washable cotton cover. Fits standard case. If neck or shoulder pain, or body weight under 150 pounds use soft style, if over 150 pounds use firm style.

60. THERMOELASTOMER HAND EXERCISER (MODEL T1 21)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Cylindrical hand exerciser. Thermoelastomer molds to hand; holds heat or cold for an hour. Warm in oven or hot water; cool in freezer. Washable terry cover, strap.

61. THERMOPHORE MOIST HEAT PACK (MODELS T1 32 & T1 31)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Electric moist heating pad. Produces moisture from the air. Hand held switch automatically shuts off pack when grip is loosened. Petite size 4 by 14 inches. Extra large size 13 by 27 inches.

62. THREE PANEL BACK SUPPORT (MODELS B2 17R & B2 17L)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support. Three independent stretch panels, absorbent, hypoallergenic Helanca lining, no roll design, velcro closure, machine washable. Regular sizes fits 30 to 45. Large size fits 46 to 62.

63. TWENTY FOUR INCH FOLDING REACHER (MODEL M2 17)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Folding reachers. Trigger grip, magnet on tip, lightweight and precise grasp. Length 24 inches, folds to 12 inches. Voluntary closing.

64. TWIN REST SEAT CUSHION (MODEL S1 2) & TWIN REST ZIPPER COVER (MODEL S1 3)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adjustable height inflatable cushion with middle rectangular opening. Each side inflates separately, deflates to pocket side for carrying. Inflated dimensions 16 by 17 inches. Zipper cover of green percale.

65. U SHAPED KNEE SUPPORT (MODEL T1 14)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Knee brace. Shock absorbent foam rubber inverted U shaped pad over patella. 3 flexible stays on each side, seamless surgical elastic with rubber core, open patella.

66. VELCRO CLOSURE DIGNITY PANTS (MODELS D1 3 & D1 4)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Velcro closure underwear for incontinence. Front flap with two side velcro closures. Washable, polyester knit fabric, pocket with stay dry lining, leakproof backing and disposable pads. Uses DIGNITY regular pads, D1 5 or D1 7. Includes two regular and two heavy duty pads.

67. VINYL NON SLIP BATH MAT (MODEL B1 20) & VINYL NON SLIP SHOWER MAT (MODEL B1 21)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Bathtub or shower mat. Mildew resistant machine washable vinyl, 240 suction cups, cushioned surface. Bath mat dimensions 15.75 by 41 inches; shower mat 23 5/8 inches square.

68. VISIDEX II (MODEL 2660 M1 13)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reagent strips to measure blood sugar level. User places one drop of blood on strip and compares color to chart. Includes 25 strips and color chart. See separate entry for finger puncture device, M1 14.

69. WALK A TRAY (MODEL M2 26)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Folding tray for walker. Attaches to front of any walker having a tray level width of 17.75 to 18.5 inches. Does not interfere with normal walker operation. Snaps on and off; support braces fold down when tray is not needed.

70. WALKER TOTER (MODEL M2 32)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Tote bag for the front of any walker. Two 7 by 7.74 inch pockets, one 14 by 16 inch pocket, blue twill fabric, patterned pockets.

71. WALL CHROME EXTENSION MIRROR (MODEL B1 23)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wall mounted regular and magnifying 6 by 8 inch mirror with chrome plated extension arm. Folds flat against wall; swivels 180 degrees and extends to 30 inches.

72. WEEKLY MEDICATION ORGANIZER (MODEL S2 3)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Weekly medication organizer has 28 compartments. Four separate dosages for each day of the week.

73. WHEELCHAIR FRONTPACK (MODEL M2 19)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pocket attaches to any wheelchair, walker, or 3 wheeled vehicle with lock straps without interfering with wheels or brakes. Capacity 135 cubic inches. Dimensions 2.5 by 6 by 9 inches.

74. WHEELCHAIR TRAY, WORKSTATION (MODEL M2 28)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair tray. Rigid, clear plastic, high strength 0.25 inch polycarbonate tray with metal rim. Attaches with velcro straps to any standard wheelchair. Cannot be used if joystick control is on armrest. 19 by 24 inches.

75. ZIG ZAG BATH GRIP (MODEL B1 22)

    --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Safety grab bar with three hand grips, grooved back and 4 bolts. Solid ABS plastic, mounting hardware included. Length 28 inches.

See Self-Care, Inc. products that are currently available.