Diestco Manufacturing Co.

PO Box 6504
Chico, California 95927
United States
Telephone: 800-795-2392 or 916-893-3136.
Fax: 916-893-2635.
Web: http://www.diestco.com.
Email: info@diestco.com.

Products manufactured by Diestco Manufacturing Co. (listed alphabetically)

1. DIESTCO ARMREST FRONT BAG

   The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.

2. DIESTCO ARMREST POCKET

   The Diestco Armrest Pocket is a wheelchair side pocket designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of waterproof nylon, the pocket attaches to the wheelchair armrest with the included straps. DIMENSIONS: 11 x 5 x 3 inches.

3. DIESTCO BASKET LINER

   The Diestco Basket Liner is a liner for scooter baskets designed for use by individuals with mobility or lower extremity disabilities. Made of water-resistant nylon, this liner has a zippered top. DIMENSIONS(WxLxD): 13 x 10 x 7 inches.

4. DIESTCO CARGO SHELF

   The Diestco Cargo shelf is an under seat pocket designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mesh shelf attaches to the frame of manual wheelchairs underneath the seat with the included hook-and-loop straps. DIMENSIONS(WxD): 15 x 16 inches.

5. DIESTCO DELUXE ARMREST SADDLE BAG (MODEL B2121)

   The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.

6. DIESTCO DELUXE SCOOTER TILLER BAG

   The Diestco Deluxe Scooter Tiller Bag is a scooter fron pouch designed for use by individuals with lower extremity or mobility disabilities. Made of watter-resistant nylon, this bag has a front zippered pocket, a front mesh pocket, a side pocket, and an inside pocket. It attaches to the handlebars and can be mounted in front or behind the tiller. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

7. DIESTCO DELUXE SEATBACK BAG

   The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and a zippered main compartment. DIMENSIONS: 14 x 16 x 4 inches.

8. DIESTCO DELUXE WALKER BAG

   The Diestco Deluxe Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a side pocket with hook-and-loop closure, a front zipper pocket, front and side mesh pockets, and a back pocket. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

9. DIESTCO DOWN-IN-FRONT WHEELCHAIR BAG

   The Diestco Down-in-Front Wheelchair bag is an under seat pocket desighed for use on manual wheelchairs without armrests. Made of water-resistant nylpn, this single-pocket bag attaches to the lower front frame of the wheelchair behind the user's legs with buckle-closure straps. DIMENSIONS(WxLxD): 11 x 6 x 3 inches.

10. DIESTCO EXTRA LARGE ARMREST SADDLE BAG (MODEL 2131)

    The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.

11. DIESTCO FABRIC CANE AND CRUTCH HOLDERS (MODELS B6213 & B6313)

    The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).

12. DIESTCO FABRIC OXYGEN TANK HOLDER (MODELS B6211 & 6311)

    The Diestco Fabric Oxygen Tank Holder is a oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. Made of water-resistant nylon, this case attaches to wheelchairs and scooters with hook-and-loop straps. Model B6211 is designed for use on scooters with captain-style seats or powered wheelchairs without push handles. Model B6311 is designed for manual and transport wheelchairs with push handles.

13. DIESTCO LARGE ARMREST SADDLE BAG (MODEL B2125)

    The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

14. DIESTCO LARGE FRONT WALKER BAG (MODEL 5412)

    The Diestco Large Front Walker Bag, model 5412, is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the front of the walker using straps. This bag has a large pocket in back and two front mesh pockets. DIMENSIONS(WxLxD): 17 x 12 x 2 inches.

15. DIESTCO MID-RANGE SEATBACK BAG (MODEL B1117)

    The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and a zippered main compartment. DIMENSIONS: 12 x 13 x 3 inches.

16. DIESTCO MONSTER SEATBACK BAG (MODEL B1113)

    The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.

17. DIESTCO POWER CHAIR JOYSTICK COVER (MODEL V2200)

    The Diestco Power Chair Joystick Cover, model V2200, is a powered wheelchair control cover designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this cover fits around the controller to protect it from dirt and moisture while still allowing use. A clear vinyl top allows for visibility.

18. DIESTCO STANDARD ARMREST SADDLE BAG (MODEL B2111)

    The Diestco Standard Armrest Saddle Bag, model B2111, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.

19. DIESTCO STANDARD SEATBACK WHEELCHAIR BAG

    The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.

20. DIESTCO STANDARD WALKER BAG

    The Diestco Standard Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a flap cover with hook-and-loop closure.

21. DIESTCO UNIVERSAL CUP HOLDER

    The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.

22. FOLDING MANUAL WHEELCHAIR COVER

    The Folding Manual Wheelchair Cover is a wheelchair cover designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or other people who use wheelchairs. Designed for manual wheelchairs, this cover is weather and dust resistant and is made for travel, wheelchair lifts and storage. Features include a Velcro seam with snap buckle; a front elastic band that wraps around the footrest; a rear drawstring cinch (cord lock) that secures the cover bottom to wheels; four underside tie down grommets that work with bungee-style cords for highway travel; and a carrying pouch. DIMENSIONS: 38 x 9 x 44 inches. WARRANTY: One year manufacturer’s warranty.

23. LARGE AND TALL POWER WHEELCHAIR COVER

    The Large and Tall Power Wheelchair Cover is a wheelchair cover designed for use by tall individuals who use power wheelchairs. This waterproof cover is designed to fit wheelchairs with high seat backs, and it can fit small and medium chairs. It is available in light weight or heavy duty material. DIMENSIONS (HxLxW): 48 x 44 x 23 inches. The circumference is 124 inches. COLOR: Black

24. LARGE GLOVE BOX

    The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.

25. SCOOTER SEAT COVER

    The Scooter Seat Cover is a seat accessory for a scooter designed for use by individuals with lower extremity or mobility disabilities. This weatherproof cover secures under the seat using the locking drawstring and can be used while the scooter is being driven.

26. SCOOTER TILLER COVER

    The Scooter Tiller Cover is designed to protect scooter controls from rain during use. Made of weather-resistant material, this cover covers the tiller and handlebars. Hand openings enable the user to grasp the handlebars while keeping the hands protected from the weather. The cover has a clear vinyl top to allow the control panel to remain visible. SIZES: Small or large.

27. SLEEVE GUARDS

    The Sleeve Guards are sleeve protectors designed for use by individuals who use manual wheelchairs. These guards are worn over the user’s original garment to protect shirt sleeves, jackets and skin against moisture and dirt from the wheelchair's wheels. SIZE: One size fits all.

28. WEATHERBEE POWER CHAIR COVER

    The WeatherBee Power Chair Cover is designed to protect powered wheelchairs from dust or moisture during transport or storage. To use, slip the cover over the wheelchair and secure underneath using the locking drawstring. Grommets are also provided for additional fastening. The cover is available in standard or heavy-duty models. SIZES: Regular, large, extra large, or tall. DIMENSIONS(HxWxL): The regular cover is 38 x 18 x 44 inches. The large cover is 38 x 23 x 44 inches. The extra large cover is 48 x 18 x 44 inches. The tall cover is 48 x 18 x 44 inches. WEIGHT: 5 pounds. COLOR: Black.

29. WEATHERBEE SCOOTER COVER

    The WeatherBee Scooter Cover is designed to protect scooters from dust or moisture during transport or storage. To use, slip the cover over the scooter and secure underneath using the locking drawstring. Grommets are also provided for additional fastening. The cover is available in standard or heavy-duty models. SIZES: Mini, regular, large, or super large. DIMENSIONS(HxWxL): The mini cover is 30 x 16 x 42 inches. The regular cover is 33 x 18 x 55 inches. The large cover is 33 x 28 x 55 inches. The super large cover is 46 x 33 x 64 inches. WEIGHT: 5 pounds. COLOR: Black.

30. WEATHERBREAKER, THE

    The WeatherBreaker is a canopy for scooters designed to protect individuals who use scooters from the weather. This canopy is available in standard, vented, and maximum protection styles. The standard model is made of solid fabric. The vented model has mesh material on the sides and back instead of solid fabric to provide more ventilation for heat protection while still sufficiently protecting from sunlight and rain. The maximum protection model is the same as the vented model with the addition of plastic drapes that cover the wheelchair or scooter sides from the canopy top to seat bottom for maximum protection. The plastic drapes slip over the canopy and are removeable when not needed. The canopy includes a mounting kit with all necessary parts needed to mount the canopy. Althought the kit varies slightly based on the wheelchair or scooter make and model, it includes two mounting poles that are designed not to interfere with the normal operation of the wheelchair/scooter. Once the mounting poles are attached, the canopy slips in and out. DIMENSIONS: The mounting poles are approximately 8 inches tall and less than an inch wide. WEIGHT: 10 pounds. COLOR: The canopy is available in blue, gray, red or teal. The mounting poles are black.