RoMedic, Inc.

300 West Chestnut Street, Suite B
PO Box 388
Ephrata, Pennsylvania 17522
United States
Telephone: 888-625-4343 or 717-733-1444.
Fax: 888-691-1091.
Web: http://www.romedic.com.
Email: info@romedic.com.

Products manufactured by RoMedic, Inc. (listed alphabetically)

1. ANTI-SLIP PAD (MODEL 8040)

   The Anti-Slip Pad, model 8040, is a non-slip pad designed for use by individuals with mobility or balance disabilities. This small, lightweight rubber-foam pad can be used to prevent the individual from slipping in bed or in a chair or it can be placed under the user's feet to prevent sliding during transfers. DIMENSIONS (LxWx H): 17 x 17 x .25 inches. WEIGHT: .1 pound.

2. AUTOSLIDE (MODEL 8100)

   The Autoslide, model 8100, is a car transfer aid designed to assist individuals with mobility disabilities in entering or exiting a car. The bottom section of the two-section device is attached to the back of the seat frame using a strong hook and the front is strapped under the seat to prevent sliding. The user sits on the attached top section of the unit and rotates; the top section slides against the bottom section to provide smooth transfers. The small, lightweight unit is equipped with side handles. DIMENSIONS (LxW): 18 x 18 inches. WEIGHT: 1 pound.

3. COMFORT CUSHION (MODEL 8050)

   The ComfortCushion, model 8050, is a non-slip rubber-foam cushion designed for use by individuals with mobility or balance disabilities. Made of cellular plastic, the cushion is placed under the buttocks to prevent the user from sliding down in bed and at the same time relieve pressure on the abdomen. Placing the pillow under the knees is also comfortable and relieves leg pressure. DIMENSIONS (LxW): 40 x 50 centimeters.

4. EASYBELT (MODELS 6012, 6013, 6014, & 6015)

   EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (6015). DIMENSIONS: Extra small is for 45 to 70 centimeter waists; small is for 60 to 100 centimeter waists; medium is for 70 to 120 centimeter waists; large is for 100 to 160 centimeter waists.

5. EASYGLIDE (MODELS 5020, 5050, 5060, & 5070)

   The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model 5050 is 30 x 13 x .25 inches. Model 5060 is 23 x 10 x .2 inches. Model 5070 is 17 x 8 x.2 inches. CAPCITY: All models have a maximum capacity of 400 pounds. WEIGHT: Models 5020 weighs pounds; model 5050 weighs 3 pounds; model 5060 weighs 1.5 pounds; and model 5070 weighs 1 pound.

6. EASYSLIDE (MODEL 1030)

   The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual is turned on one side and the slide is placed beneath him/her so the individual is lying half on it. The individual should be tilted slightly so that the full body weight is pressing on the mat The mat is then pulled in the direction of the intended move, pulling the individual fully on to the mat and accomplishing the transfer. DIMENSIONS (LxW): 200 x 90 or 190 x 60 centimeters.

7. EASYSLIDE (MODEL 1230)

   The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 100 x 70 centimeters.

8. EASYSLIDE (MODEL 1480)

   The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 200 x 90 centimeters.

9. EASYSLIDE (MODELS 2010, 2015, 2020, & 2030)

   The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. Models 2020 and 2030 have outer material consisting of microfibres with a removable protective cover in waterproof polyester. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 50 x 60 centimeters (2010, 2020, 2030) or 25 x 60 centimeters (2015).

10. EVA MOBILE LIFT (MODEL 450EE)

    The Eva Mobile Lift, model 450EE, is a powered transfer lift designed for use in transferrring individuals with mobility or severe physical disabilities. It can lift an individual from a seated or prone position, and can also be used for gait training in combination with lifting accessories such as a gait belt.

11. FLEXIBELT (MODELS 6023, 6024, 6025, & 6026)

    Flexibelt, models 6023, 6024, 6025, and 6026, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. The belt has a polyester surface for comfort against the body, with strong vertical and horizontal handles for gripping support. SIZES: Small with 7 handles (6023), medium with 9 handles (6024), large with 11 handles (6025), or extra large with 13 handlees (6026). DIMENSIONS: Small is for 60 to 100 centimeter waists; medium is for 70 to 120 centimeter waists; large is for 100 to 160 centimeter waists; extra large is for 115 to 175 centimeter waists.

12. FLEXIGRIP (MODEL 6090)

    FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

13. FLEXIMOVE (MODELS 3012, 3020, & 3030)

    The Fleximove, models 3012, 3020, and 3030, is a transfer aid designed for turning, positioning, or transferring an individual with mobility disabilities. This unit can be used for moving patients further up in bed or to and from a wheelchair. 3012 has an inner surface made of moisture-resistant nylon for environments with special hygiene requirements, while 3020 and 3030 have a softer, more comfortable velvet surface. DIMENSIONS (LxW): 60 x 20 centimeters (3012, 3030) or 50 x 20 centimeters (3020).

14. FLEXIMOVE (MODELS 4011, 4012, & 4016)

    The Maximove is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. DIMENSIONS (LxW): 100 x 43 centimeters (4011), 110 x 53 centimeters (4012), 150 x 43 centimeters (4016).

15. MINISTRETCHER (MODEL 4017)

    The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIMENSIONS (LxW): 135 x 43 centimeters.

16. RENA 440EE

    The Rena 440EE is a sit to stand lift designed for use by individuals with mobility disabilities. This powered lift can be used to stand, pivot transfer, and move a patient from a seated position. The patient is supported with adjustable shin pads, foot supports, and behind the back supports. The lift's leg sections are wide apart to accommodate a variety of chair types. The lift has power raise and lower functions as well as power leg spreading operated by its hand control. It also has manual and electrical emergency lowering and an Emergency Stop function. POWER: Uses batteries. CAPACITY: 440 pounds.

17. RETURN 7500

    ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt.

18. RISE PORTO

    RisePorto is a powered overhead transfer lift designed for use in transferring individuals with mobility or severe physical disabilities or spinal cord injury. This ceiling track lift can be used to transfer an individual between two locations. A helping arm facilitates transfer of the lift between different track systems. The handset is pneumatic. The unit has an emergency stop function and electrical and mechanical emergency lowering. The unit switches off automatically after 10 minutes when not in use. DIMENSIONS: The lifting interval is 196 centimeters. CAPACITY: 200 kilograms (440 pounds).

19. RISE425T & RISE625T

    Rise450T and Rise625T are powered overhead transfer lifts designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. With the correct lifting accessories, this overhead lift can transfer users between two locations. The lift unit is installed on an appropriate track system. The track system can be a single track, with or without curves and switches, or a traverse/gantry system. The ceiling lift motor has a display that shows the battery charge level and number of lifts performed. The handset is pneumatically controlled and the lift unit has an emergency stop function, with both electrical and mechanical emergency lowering. The unit switches off automatically after 2 minutes when not in use. DIMENSIONS: The lifting interval is 244 centimeters. CAPACITY: 450 pounds (450T) or 625 pounds (625T).

20. TOPSHEET (MODELS 1519 & 1520)

    TopSheet, models 1519 and 1520, is a bed turning aid, incontince pad, and decubitis pad designed for use by individuals with mobility disabilities or incontinence. The top side (model 1520) is made of super-absorbent material, and the underside (model 1519) consists of a polyurethane-coated moisture-repellant membrane. The surface that the patient lies on is soft, brushed polyester. The surface always feels dry to lie on, which helps prevent pressure sores. Strong straps for fastening to a ceiling lift or mobile lift enable safe turnings. DIMENSIONS: Lower part (model 1519) is 80 x 140 centimeters. CAPACITY: 200 kilograms.

21. TURNSHEET (MODEL 1580)

    The Turnsheet, model 1580, is a transfer aid designed to assist individuals with mobility disabilities in turning or changing positions in bed. The Turnsheet consists of two elements: the first element is quilted mat with a woven cotton top layer, a layer of flame-retardant trevira padding, and a bottom layer of ultra-low friction woven nylon. This element is equipped with webbibg straps to be attached to the head of the bed frame. The second element is a matttress cover with an ultra-low friction woven nylon top and a sticky texture bottom layer. Velcro straps that run under the mattress prevent movement of this cover. The first element is used to turn the individual and both elements may be left on the bed permanently. This sheet may be used for assisted or unassisted turning. DIMENSIONS (LxWxH): 56 x 77 x 2 inches. WEIGHT: 6 pounds.

22. TURNTABLE (MODEL 5085)

    The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for the transfer. DIMENSIONS: 38 centimeters in diameter.

23. WENDYLETT

    WendyLett is a sliding sheet and bed mobility aid designed for use by individuals who find it difficult to turn in bed. The central part is smooth to reduce friction, which enables users to turn or be turned by a caregiver with little force. Care recipients effortlessly slide sideways but are slowed by the anti-slip material at the sides. OPTIONS: WendyLett2Way and WendyLett4Way are drawsheets that can be placed on top of the sliding sheet to prevent sliding down in bed while turning. The drawsheets are striped to indicate in which directions turning is easier. DIMENSIONS: The WendyLett is 100 x 200 centimeters (cm), 140 x 200 cm, 200 x 200 cm, or 200 x 90 cm; the WendyLett2Way is 90 x 180 cm, 100 x 200 cm, or 140 x 200 cm; and the WendyLett4Way is 140 x 200 cm. COLOR: The WendyLett is available in solid white, gray and white checked, or gray and white striped. the WendyLett2Way is available in striped only, and the WendyLett4Way is available in checked only.

See RoMedic, Inc. products that are no longer available.