Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu

Sunrise Medical

North American Headquarters
2842 Business Park Avenue
Fresno, California 93727
United States
Telephone: 800-333-4000 or 800-300-7502.
Web: http://www.sunrisemedical.com.
Email: webmaster@sunmed.com.

Products manufactured by Sunrise Medical (listed alphabetically)

  1. 3 INCH SWIVEL RUBBER SWIVEL WHEEL CASTERS WITH GLIDE BRAKES.

    Casters for the front legs of standard Guardian walkers. 3 inches diameter, thermoplastic rubber tires won't mar floors. Standard rear glide brakes are provided for stopping.

  2. 3-INCH WHEELED FOOTPIECE (MODELS 7729 & 7731)

    Three inch nonswivelling wheels to replace front legs of Guardian Safe T Fold walker. Model 7731 for adult and youth sizes. Model 7729 for child and toddler sizes.

  3. ALL ELECTRIC REHABILITATION BED (MODEL BG33)

    Motorized bed. Removable laminate headboard and footboard. Cold roll steel frame. 5 inch casters with 2 positive locking treads. Four post telescoping leg construction allows straight line, straight line Trendelenburg and reverse Trendelenburg positions, high cardiac chair and postural drainage position, elevated head and knee positions. Nurse controls located at foot end of bed. Options: patient control pendant, revolving side rails, deluxe casters, traction, and trapeze. Bed 89 3/4 inches by 36 inches. Height adjustable from 16 1/2 inches to 28 1/2 inches. Weight 325 pounds. Uses 80 by 35 inch mattress. Pan construction.

  4. ARMREST CANE CRUTCH (MODELS 5190 & 5191)

    Padded forearm trough on aluminum upright with safety rubber tip. Vertical contoured handgrip. Distance adjustable from front of trough. Silencing system eliminates rattle. Push button height adjustable tall adult 42 to 51 inches. Adult 36 to 45 inches.

  5. BEC PAK

    Wheelchair add on power drive with power pack easily placed off or on a manual wheelchair. 24 volt system, two 12 volt batteries, solid state controls, automatic electronic brakes. Battery charger included. Arc of joy stick, 7/8 inches from neutral position to full speed. Pressure required to operate, 3 ounces. Proportional control , can be positioned on left or right. High or low speed gears. Battery pack weighs 47 pounds. Up to 10 miles per charge. Operates at speeds up to five miles per hour. Rear wheelchair wheels replaced with 12 inch diameter pneumatic tires, two motors with internal motor drive to wheels (no belts or chains). Wheelchair folds by removing battery pack, mounted on rear of chair. Free wheeling capability.

  6. BLACK TEXTURE COATED FOOTPLATES.

    Footplates for Quickie wheelchairs. 90 degree/90 degreee aluminum footplates with a painted black texture surface. Replaced textured tape to provide nonslip surface.

  7. BREEZY Picture of BREEZY

    The Breezy is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of chrome, silver texture, or blue finishes. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon thw wheels and casters selected. The standard back height adjusts from 17 to 19 inches. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-push or high-pull wheel locks are included. Brake extension handles and grade aids are optional. CASTERS: 8-inch polyurethane casters are standard and 5-inch polyurethane casters are available at no charge. 8-inch pneumatic casters are optional. WHEELS: 22- or 24-inch mag wheels are standard. 20-inch wheels are available at an extra charge. Low-profile polyurethane tires are standard. Full-profile polyurethane, pneumatic, or pneumatic tires with airless inserts are optional. Composite handrims are standard. Aluminum or plastic-coated handrims and projections are optional. Threaded axles are standard; offset threaded axles, quick-release axles, and one-arm drive are optional. FOOTRESTS: 60-degree swing-away footrests with composite footplates are standard. Elevating, articulating, or 70-degree legrests and extended footplates are optional. OPTIONS: Backpack, seat pouch, spoke guards, touch-up paint, positioning belts, and others. CAPACITY: 250. WEIGHT: 30 pounds not including footrests. WARRANTY: Lifetime frame guarantee.

  8. BREEZY 2 Picture of BREEZY 2

    The Breezy 2 is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of forest green, silver texture, or blue finishes. Anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon the wheels and casters selected. The backrest adjusts from 16 to 19 inches and includes push handles. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Padded sling upholstery is standard; a non-padded sling is available. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-push or high-pull Breezy wheel locks are included. High-push or high-pull Quickie wheel locks, brake extension handles, and grade aids are optional. CASTERS: 8-inch polyurethane casters are standard and 5-inch polyurethane casters are available at no charge. 8-inch pneumatic casters are optional. WHEELS: 22- or 24-inch mag wheels are standard. 20-inch wheels are available at an extra charge. Low-profile polyurethane tires are standard. Full-profile polyurethane, pneumatic, or pneumatic tires with airless inserts are optional. Composite handrims are standard. Aluminum or plastic-coated handrims and projections are optional. FOOTRESTS: 60- or 70-degree swing-away footrests with composite footplates and heel loops are standard. Elevating or articulating legrests are optional. OPTIONS: Backpack, seat pouch, spoke guards, touch-up paint, positioning belts, and others. WEIGHT: 28 pounds, not including footrests. CAPACITY: 250 pounds. WARRANTY: Lifetime frame guarantee.

  9. BREEZY BASIC

    The Breezy Basic is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height adjusts from 17 to 19 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-push or high-pull wheel locks are included. Brake extension handles are optional. CASTERS: 8-inch polyurethane casters are standard. WHEELS: 24-inch mag wheels with molded tires and composite handrims are standard. Aluminum or plastic-coated handrims are optional. FOOTRESTS: 60-degree swing-away footrests with composite footplates and heel loops are standard. WEIGHT: not including footrests, 30 pounds. WARRANTY: Lifetime frame guarantee.

  10. BREEZY LE

    The Breezy LE is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height is 17 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-push or high-pull wheel locks are included. Brake extension handles are optional. CASTERS: 8-inch polyurethane casters are standard. WHEELS: 24-inch mag wheels with molded tires and composite handrims are standard. Aluminum or plastic-coated handrims are optional. FOOTRESTS: 60-degree swing-away footrests with composite footplates and heel loops are standard. Articulating or elevating legrests are available. CAPACITY: 250 pounds. WEIGHT: 30 pounds, not including footrests. WARRANTY: Lifetime frame guarantee.

  11. BREEZY ULTRA 4 Picture of BREEZY ULTRA 4

    The Breezy Ultra 4 is a folding manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Non-corrosive aluminum frame. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 15.5 to 19.5 inches. UPHOLSTERY: Nylon upholstery. ARMRESTS: Adjustable-height padded armrests. Also available are flip-back arms in either desk or full length. CASTERS: 6 or 8 inch angle-adjustable casters. WHEELS: 20-inch full profile or 24-inch low profile polyurethane wheels with aluminum handrims. FOOTRESTS: Adjustable length swing-away footrests. CAPACITY: 250 pounds. WEIGHT: 30 pounds without footrests. WARRANTY: Manufacturer guarantees the frame for the lifetime of the original purchaser and includes a 3-year warranty on the rear tires, a 1-year warranty on Sunrise made parts and components, and a 90-day warranty on manufacturer upholstery against defects in materials and workmanship. DELIVERY TIME: By ground, next day, 2 days, or 3 days.

  12. CANT-I-LEVERED DELUXE PUSHBUTTON DROP ARM WITH PADDED BACK AND SEAT (MODEL 98204)

    Fixed height commode. Cantilevered design allows unrestricted left-to- right leg movement for easy transfer. Rust resistent, chrome plated steel frame with padded back and seat, has foam hand grips. Arm folds down by pushing spring button on front of frame. Open frame design allows for over the toilet use. Removable backrest. Pail, lid, and splash shield standard. Overall width 22 inches. Depth 22 to 24 inches. Adjustable height 31 to 36 inches. Adjustable seat height 20 to 25 inches. Adjustable seat depth 18 to 20 inches. Seat width 16 1/2 inches. Arms 7 inches from seat. Width between arms 18 1/2 inches. Weight 21 pounds.

  13. CANT-I-LEVERED PUSHBUTTON DROP ARM (MODEL 98202)

    Fixed height commode. Cantilevered design allows unrestricted left-to- right leg movement for easy transfer. Rust resistent, chrome plated steel frame with foam hand grips. Arm folds down by pushing spring button on front of frame. Open frame design allows for over the toilet use. Removable backrest. Pail, lid, and splash shield standard. Overall width 22 inches. Depth 22 to 24 inches. Adjustable height 31 to 36 inches. Adjustable seat height 18 1/2 to 23 1/2 inches. Seat width 15 inches. Arms 8 inches from seat. Width between arms 18 1/2 inches. Weight 24 pounds.

  14. CARRYING BASKET (MODEL 7715)

    Large vinyl coated wire basket attaches with hooks to the top of the walker frame. Easy to remove or install.

  15. CARRYING POUCH (MODEL 7719)

    Zippered carrying pouch attaches to the top of the walker frame with velcro straps. Three side pockets and a large central storage area. Washable fabric.

  16. CLOSED HANDGRIP CUSHION (TYPE 16)

    Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.

  17. COMPLETE PLATFORM GUIDE-LINE CRUTCHES (MODELS 676066 & 676076)

    Aluminum auxillary crutch with Naugahyde padded platform attachment for forearm weightbearing. Platform attaches with screws and wing nuts and is completely adjustable from axilla to forearm height. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for extension and rotation. Velcro closure over forearm. Tall adult 46 to 60 inches high, adult (model 676066) 45 to 55 inches high, youth (model 676076) 38 to 46 inches high.

  18. COMPOSITE SHOWER STOOL & CHAIR

    The Composite Shower Stool & Chairs, Models K11115 & K11116, are shower seats for persons with physical disabilities who are unable to stand beneath a shower flow. The lightweight, plastic stool and chair is textured for secure seating. A backrest on the chair provides additional support. Both are designed to fit inside any standard size tub or shower. OPTIONS: Footpiece extensions can be ordered separately to adjust chair or seat height from 18.5 inches to 20.5 inches. DIMENSIONS: Seats measure 14 inches deep x 19 inches wide. CAPACITY: 250 pounds.

  19. CONTOURED HANDGRIP CUSHION (MODEL 816)

    Contoured and angled handgrip of neoprene sponge with metal reinforced center. Completely replaces wooden crutch handgrip. Uses standard crutch hardware for attachment. Will fit all standard adult and medium size crutches. Width 4 1/16 inches.

  20. CYCL-ONE 3, 12, 48

    The Cycl-One is a cycle attachment for manual wheelchairs designed to transform the chair into a hand-propelled cycle. The attachment consists of a front wheel, handcrank shaft, and attachments for mounting onto the wheelchair frame. FRAME: The frame is made of high tensile steel tubing and the crankset is alloy with a 28-tooth chainring (3 and 12 speed models) and 34 tooth chainring on the 48-speed model. HANDLES: The "together"-style hand pedals with parallel horizontal handgrips are designed to be cranked simultaneously in a rowing motion. WHEEL: Front wheel is 20 inches in diameter with a 1 3/8-inch wide threaded tire. BRAKES: Internal hub actuated by back pedaling. GEARING: Three, 12, or 48 speed models. Shift levers are SACHS Torpedo trigger style on the 3-speed, and Shimano Light Action on the 12- and 48-speed models. OPTIONS: Available accessories for the Cycl-One attachments include vertical handle grips, a fender for the wheel, additional rim-style brake, water bottle and cage, and a cycling computer. Accessories include a backpack, helmet, instructional video, quad cuffs, and tool kit. COLORS: 11 colors are available at no additional cost; 3 custom colors are available for an additional $105; 3 custom splatter patterns are available for an additional $340; special effects and custom paint jobs are available for an additional $420.

  21. EASY-CARE COMMODE

    Fixed height commode. Constructed of aluminum with or without back or of chrome steel with back only. Armrests. Seat width 15 inches. Seat depth 16 inches. Adjustable height 25 3/4 to 29 3/4 inches. Overall width 20 1/4 inches. Width between arms 17 1/4 inches. Seat to armrest 5 1/4 inches.

  22. EASY-CARE SHOWER CHAIR

    Shower chair. Molded back and seat with hand holds. Aluminum frame. Available with or without back. Adjustable seat height 13 to 20 inches. Seat depth 11 inches. Seat width 19 1/4 inches. Light gray.

  23. FOAM CUSHION WEDGE AND FLIPDOWN HARDWARE

    Abductor pad available in 2 sizes: 3 1/2 inches wide by 3 inches high by 5 inches deep, and 2 inches wide by 3 inches high by 3 1/2 inches deep. Mounts to underside of solid seat with flipdown or slide-out hardware to allow transfers.

  24. FOLDING RED DOT SAFE T WALKER (MODELS 7756 & 7755)

    Pushbutton height adjustable four legged frame. Vinyl handgrips and rubber safety tip. Unit folds to 3 3/4 inches for storage by depressing release tab with finger or side of hand. No low cross members. Weight 5 3/4 pounds. Base 16 to 23 inches. Adult (model 7755) height 32 to 36 inches. Youth (model 7756) height 29 to 33 inches.

  25. GRANDTOUR ROLLING WALKER (MODEL 7955PG)

    Wheeled walker has eight inch front casters, and rear wheels with brakes. Crossbrace is high to avoid hitting legs while walking. The soft handgrips are of DuPont Hypalon foam. Pewter grey finish; 25 inches wide; 27 inches deep; 32 to 38 inch adjustable height. Folded depth is 5 inches. Optional carrying basket and carrying pouch. Weight 13 pounds. Lifetime limited warranty.

  26. GUARDIAN ADJUSTABLE-HEIGHT TUB TRANSFER SEAT

    The Guardian Adjustable-Height Tub Transfer Seat ia a transfer bench designed for use by persons with physical disabilities who use wheelchairs. The bench allows individuals to slide from a wheelchair into the tub. This bench features a rust-resistant anodized aluminum frame, aluminum side and backrest handles to aid transfers, suction feet, and a vinyl-covered padded seat and backrest. DIMENSIONS: The seat height adjusts from 16 to 21 inches. The seat measures 28 inches wide x 18 inches deep. CAPACITY: 250 pounds. WEIGHT: 14 pounds. WARRANTY: Included.

  27. GUARDIAN EASY CARE 1000 TRANSPORT WHEELCHAIR Picture of GUARDIAN EASY CARE 1000 TRANSPORT WHEELCHAIR

    The Guardian Easy Care 1000 Transport Wheelchair is a transport wheelchair designed for use by individuals with severe physical disabilities who require assistance for wheelchair mobility. FRAME: Choice of chrome-plated carbon steel or anodized aluminum frame. SEAT: Choice of 19 inch and 17 inch seat widths. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Full-length arms. WHEELS: Eight inch wheels in front and back. FOOTRESTS: Swing away removable footrests. WEIGHT: The aluminum model weighs 19 pounds; the steel frame model weighs 26 pounds.

  28. GUARDIAN EASY CARE 1000 WHEELCHAIR Picture of GUARDIAN EASY CARE 1000 WHEELCHAIR

    The Guardian Easy Care 1000 Wheelchair is a manual wheelchair designed for use by individuals with walking disabilities and mobility disabilities. FRAME: Chrome-plated, carbon steel frame. SEAT: Choice of seat widths of 16 inches and 18 inches. UPHOLSTERY: Vinyl upholstery is flame retardant. ARMRESTS: Fixed full length armrests. WHEELS: Composite mag wheels are molded with contours. Sealed bearings are maintenance free. FOOTRESTS: Fixed footrests.

  29. GUARDIAN EASY CARE 2000 WHEELCHAIR Picture of GUARDIAN EASY CARE 2000 WHEELCHAIR

    The Guardian Easy Care 2000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. It is equipped with a dual axle which allows the seat to be lowered to hemi height. There is a full sized chart pocket on the backrest. FRAME: The frame is chrome-plated, carbon steel with front rigging mounts. SEAT: The seat widths are 16 or 18 inches. ARMRESTS: A choice of padded removable desk-length or fixed full-length armrests is offered. WHEELS: Composite mag wheels are molded with contours. FOOTRESTS: A choice of swingaway footrests, elevating legrests, or fixed footrests is available.

  30. GUARDIAN EASY CARE 2000HD HEAVY-DUTY AND EXTRA WIDE WHEELCHAIRS Picture of GUARDIAN EASY CARE 2000HD HEAVY-DUTY AND EXTRA WIDE WHEELCHAIRS

    The Guardian Easy Care 2000HD Heavy-Duty and Extra Wide Wheelchairs are heavy duty wheelchairs designed for use by large or obese individuals with mobility disabilities. These extra wide adult manual wheelchairs have extra wide seats and reinforced construction. FRAME: The heavy-duty reinforced chromed steel frame has a dual axle which allows the seat (20-inch widths only) to be lowered to hemi height. SEAT: Available in 20-inch heavy duty and 22-inch or 24-inch extra wide seatss. UPHOLSTRY: Durable double-embossed vinyl. ARMRESTS: Padded full- or desk-length arms are avaible. FOOTRESTS: Swingaway footrests or elevating legrests are available. CAPACITY: 450 Pounds.

  31. GUARDIAN EASY CARE 3000 LIGHTWEIGHT WHEELCHAIR Picture of GUARDIAN EASY CARE 3000 LIGHTWEIGHT WHEELCHAIR

    The Guardian Easy Care 3000 Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated, carbon steel frame. Dual axle allows seat to be adjusted to hemi height. SEAT: Seat widths of 16, 18, or 20 inches are available. UPHOLSTERY: Padded nylon. ARMRESTS: Removable desk arms with padded armrests. WHEELS: Scratch-resistant composite handrim. FOOTRESTS: Swingaway footrests or elevating legrests are interchangeable with the industry's standard. WEIGHT: 35 pounds.

  32. GUARDIAN EASY CARE 4000 HIGH-STRENGTH LIGHTWEIGHT WHEELCHAIR Picture of GUARDIAN EASY CARE 4000 HIGH-STRENGTH LIGHTWEIGHT WHEELCHAIR

    The Guardian Easy Care 4000 High-Strength Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals who require a high-strength standard wheelchair. FRAME: The frame design eliminates seat guides and allows for custom backs and accessories. SEAT: Seat widths of 16, 18, or 20 inches are available. Height adjustable seat backs (16, 17, or 18 inches) are offered. ARMRESTS: Flip-back arms with an easy release mechanism. FOOTRESTS: Swingaway footrests or elevating legrests are available. WEIGHT: 33.5 pounds without legrests. WARRANTY: Lifetime limited warranty on frame.

  33. GUARDIAN EASY CARE HIGH STRENGTH LIGHTWEIGHT 4000 Picture of GUARDIAN EASY CARE HIGH STRENGTH LIGHTWEIGHT 4000

    The Breezy Easy Care 4000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 30.5 x 23 to 27 inches. The frame is chrome-plated carbon steel. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 19.75 inches. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Removable flip-back desk-length arms. WHEELS: Composite mag wheels. FOOTRESTS: Swing-away footrests or elevating leg rests. CAPACITY: 250 pounds. WEIGHT: 33.5 pounds without front riggings.

  34. GUARDIAN ECONOMY NON PADDED TRANSFER BENCH (MODEL 98309) Picture of GUARDIAN ECONOMY NON PADDED TRANSFER BENCH (MODEL 98309)

    The Guardian Economy Non-Padded Transfer Bench, model 98309, is a bath transfer bench designed for use by individuals with mobility disabilities. This bench has a textured, molded plastic backrest and seat. The non-slip seating surface has holes for water drainage. The frame is made of lightweight, anodized aluminum and is height adjustable in 1/2-inch increments. The backrest adjusts without tools for right or left facing tubs. A side arm and seat handle provide extra stability and leverage when transferring. Suction cup footpieces secure the bench to tub floor. The bench also features a built-in soap dish and a slot for a hand-held shower. DIMENSIONS (LxW): Overall, 21 x 31.5 inches; seat, 14.5 x 31.5 inches. Floor to seat height adjusts from 16.5 to 21.5 inches. CAPACITY: 300 pounds. WEIGHT: 12 pounds.

  35. GUARDIAN ESCORT Picture of GUARDIAN ESCORT

    The Guardian Escort is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 18 x 16 inches. The folded width is 14 inches. Rear ant-tips are optional. SEAT (LxW): 16 x 16, 18, or 20 inches. The floor-to- seat height is 20 inches. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Removable, padded, full- or desk-length arms. BRAKES: Spring-lock assisted wheel locks. CASTERS: 8-inch solid casters. WHEELS: 24-inch rear wheels are standard and 12-inch transport wheels are optional. An optional amputee axle kit is available. FOOTRESTS: Bi-directional swing-away footrests. OPTIONS: Convertible transport kit, oxygen tank holder, oxygen tank holder/IV pole, telescoping IV pole, anti-fold device, and chart pocket. CAPACITY: 250 pounds. WEIGHT: 37 pounds without riggings. WARRANTY: 5-year limited warranty on side frame and cross brace. Extended 3-year limited warranty on most major composite components.

  36. GUARDIAN ESCORT WHEELCHAIR

    The Guardian Escort is an adult manual wheelchair designed for use by individuals with physical disabilities, lower extremity disabilities, and mobility disabilities. FRAME: scratch- and rust-resistant frame with silver finish. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Features a three-point anchor and toggle release for secure attachment and ease of removal. Full- length, traditional or standard desk legth arms with armpads are available. BRAKES: Spring-assisted wheel locks. FOOTRESTS: Optional bi-directional footrests swing in and out. Elevating legrests without traditional push rods are available.

  37. GUARDIAN HAND HELD SHOWER WITH ERGONOMIC HANDLE (MODEL 98035) Picture of GUARDIAN HAND HELD SHOWER WITH ERGONOMIC HANDLE (MODEL 98035)

    The Guardian Hand Held Shower with Ergonomic Handle, model 98035, is designed for use by individuals with physical disabilities who require a flexible shower hose to direct the spray while either standing or sitting. This hand-held unit has an extra long hose and an ergonomic handle with a textured surface. The unit provides a choice of standard or pulsating sprays. It installs on existing 1/2-inch shower arm, and comes with a mounting bracket to allow for fixed usage as well as hand held operation. It uses less than 2.5 gallons per minute. DIMENSIONS: 1/2 inch diameter. Hose length is 86 inches. WEIGHT: 1 pound. WARRANTY: Limited lifetime warranty.

  38. GUARDIAN SHOWER/COMMODE CHAIR (MODELS 99200, 99204, & 99208)

    Wheelchair commode. Fully padded back and seat with water repellant vinyl, removable rear wheels, folding back for portability, lightweight aluminum construction, commode pan, push handles, removable armrests, multiple position commode opening, swing away removable footrests, 5 inch rubber front casters. Available with 5 inch rear casters and jack brakes, 24 inch mag or steel spoke rear wheels, aluminum or plastic coated handrim.

  39. GUIDE-LINE SAFE T CRUTCH (MODELS 67601, 67602, & 67603)

    Height adjustable aluminum crutch with molded plastic arm rest and adjustable plastic handgrip. Tall Adult/Adult (model 67601) 46 to 60 inches. Youth (model 67602) 38 to 47 inches. Child (model 67603) 29 to 38 inches.

  40. JAY GS CUSHION Picture of JAY GS CUSHION

    The Jay GS Cushion is a gel flotation cushion with a foam base designed for use by children in wheelchairs. Available with or without a pressure relief fluid pad to prevent skin breakdown, the cushion incorporates Jay Flow fluid technology. Its firm polyethylene foam base is pre-contoured with an anti-thrust shelf to keep the pelvis from sliding forward. A variety of secondary supports help to position and maintain optimal pelvic and lower extremity posture. The cushion includes growth capabilities to allow it to grow as the user grows. Anterior seat well reducers can be added to maintain the seat well length when the seat depth is increased. The longer seat well can be used to accommodate the fixed posterior pelvic tilt of sacral sitters. The standard fluid pad provides shear reduction and improved pressure distribution for users at moderate risk for skin breakdown. DIMENSIONS (LxW): 18 x 20, 14 x 17, 16 x 19, 10 x 13, or 12 x 15 inches. Each cushion is approximately 2 inches thick. CAPACITY: 250 pounds. WARRANTY: 2 years on cushion, 6 months on cover.

  41. KID KART TLC Picture of KID KART TLC

    The Kid Kart TLC is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 26.5 inches wide and is equipped with a height-adjustable padded push handle and a removable storage pack. The frame is available in a choice of black, yellow, or dusty plum. Options include transit tie downs and recline. SEAT: The seat shell can be positioned facing front or facing the rear and includes a tilt-in-space range of zero to 30 degrees. The seat depth ranges from 8 to 14 inches and the seat width adjusts from 6 to 13.5 inches. The seat shell includes a sun shade and shell fabric is available in a choice of purple and teal with fuchsia trim, forest green and purple with silver trim, or royal blue and fuchsia with silver trim. A variety of positioning aids is available, including head support, lateral trunk support, medial knee support, pelvic positioning strap, anterior trunk support, and others depending on cushion style. CUSHION: A standard cushion in short, medium, or long is included. Optional wedge, ledge, or adjustable contour cushions are available. A one-inch thick I back cushion or a 2.5-inch thick T-back cushion are available at no charge. UPHOLSTERY: The seat upholstery is available in black or grey. CASTERS: Six-inch urethane front casters are standard. Eight-inch casters with pneumatic tires are optional. WHEELS: 12.5-inch rear wheels with pneumatic tires are standard. Optional 14-inch wheels with pneumatic tires are available as an extra cost option. Airless inserts are available for both wheels. FOOTRESTS: Standard. Options include shoe holders and foot straps. OPTIONS: Tray, floor sitter feeder base for seat shell, ventilator and battery tray, IV pole, oxygen tank holder, IV and oxygen tank combination holder, and a spica platform. WEIGHT: The frame weighs 21 pounds and the seat shell weighs 22 pounds. WARRANTY: Sunrise made parts are warranted for two years.

  42. KID KART XPRESS Picture of KID KART XPRESS

    The Kid Kart Xpress is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 24 inches wide and is equipped with a height-adjustable padded push handle, transit tie downs, and an under seat fabric storage compartment. Folded dimensions are 24 x 28 x 20 inches. The frame is available in a choice of black, pink, purple, or teal. Options include a ventilator system, a ventilator base only, and recline. SEAT: The seat shell can be positioned facing front or facing the rear and includes tilt-in-space of 20 degrees anterior and 45 degrees posterior. The seat shell includes a sun shade, and shell fabric is available in a choice of jazz (multi-color body with blue trim), classic (navy body with jazz trim), or original (teal body with grey trim. A variety of positioning aids is available, including head support, lateral trunk support, medial knee support, pelvic positioning strap, anterior trunk support, and others depending on cushion style. CUSHION: A standard cushion in short, medium, or long is included. Optional wedge, ledge, or adjustable contour cushions are available. A one-inch thick I back cushion or a 2.5-inch thick T-back cushion are available at no charge. UPHOLSTERY: The seat upholstery is available in navy or grey. CASTERS: seven-inch front casters are standard. Eight-inch casters optional. WHEELS: 10-inch rear wheels with semi-pneumatic tires or 12-inch wheels with pneumatic tires are standard. Optional 14-inch wheels with pneumatic tires are available as an extra cost option. Airless inserts are available for the 12- and 14-inch wheels. FOOTRESTS: Standard. Options include shoe holders and foot straps. OPTIONS: Tray, floor sitter, booster base, feeder base for seat shell, ventilator and battery tray, IV pole, oxygen tank holder, IV and oxygen tank combination holder, raincape, and a spica platform. Also availabe is a Powe Pack system to convert the unit to a powered mobility aid. WEIGHT: The frame weighs 18 pounds and the seat shell weighs 16 pounds. WARRANTY: Sunrise made parts are warranted for two years.

  43. MEDI CHAIR (MODELS A & B)

    Geriatric or transport chair, folds down to stretcher. Chrome-plated steel frame, vinyl upholstered, solid high back, seat and one piece legrest. One piece footboard, folds flat in stretcher mode. Optional separate elevating legrest. Full length fixed arms, adjustable back angle. Two models: front 8-inch casters and rear 8-inch wheels, or front 8-inch casters and rear 24-inch wheels with handrims. Expanding lever base utilizes patient weight to operate chair, extends wheelbase for stretcher mode.

  44. OPEN TYPE HANDGRIP CUSHION (MODEL 14)

    Neoprene cushion for crutch handgrip. Has longitudinal slit opening for application to crutches. With fixed handgrip.

  45. PLATFORM CRUTCH ATTACHMENT FOR CRUTCHES (MODEL 7706)

    Naugahyde padded horizontal platform to fit any aluminum axillary crutch. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for distance from front of platform. Platform height adjustable. Velcro closure over forearm.

  46. PLATFORM CRUTCH ATTACHMENT FOR WALKERS (MODEL 7702)

    Padded forearm trough mounted on aluminum upright. Vertical vinyl handgrip can be positioned fore and aft to accommodate forearm length. Aluminum upright clamps on to upper and lower horizontal side bars of walker. Height adjustable. Velcro closure restraining strap for forearm.

  47. PREMIUM FOREARM SAFE T CRUTCH (MODELS 5160, 5161, 5162, & 5163)

    Pushbutton adjustable aluminum shaft with vinyl coated forearm cuffs. Cuffs have front or side opening as required. Contoured rubber handgrips. Rubber safety tip. Height adjustable cuff to handgrip and handgrip to floor. Handgrip to floor height tall adult 35 to 41 inches. Adult 30 to 36 inches. Youth 25 to 31 inches. Child 19 to 27 inches. Total silencing system for rattle free use.

  48. PRESTIGE PEDIATRIC FOREARM CRUTCHES

    Adjustable forearm crutches for children. Standard forearm crutches in bright metallic, royal blue or princess pink. Youth: users height 4 feet 2 inches to 5 feet 2 inches, adjustable height handle 25 to 31 inches, cuff to handle 8 1/2 to 10 inches, weight 4 pounds. Child: for user's height 3 feet 2 inches to 4 feet 8 inches, adjustable height handle 19 to 27 inches, cuff to handle 7 1/2 to 8 1/2 inches, weight 2 pounds. Toddler: user's height 2 feet 10 inches to 4 feet 4 inches, adjustable height handle 17 to 26 inches, cuff to handle 6 to 7 1/2 inches, weight 1 3/4 pounds. Tyke: user's height 2 to 3 feet, adjustable height top of handle 12 to 18 inches, cuff to handle, 4 1/2 to 6 inches, weight 1 1/2 pounds. .

  49. PRESTIGE QUADRI POISE CANES

    Adjustable quad cane. Aluminum type with steel base unit. Center column and legs reinforced. T-lock silencer for rattle prevention. Offset handle with soft foam handgrip. Left or right handed use. Pewter grey or tawny bronze. For user's with heights 4 feet 10 inches to 6 feet 4 inches. Adjustable height 29 to 38 inches. Wide base 7 by 11 inches, weight 2 pounds. Narrow base 5 by 7 inches, weight 1 3/4 pounds.

  50. PRONE BOARD (MODEL 201)

    Prone board. Angles adjust to eight positions from 0 to 90 degrees. Adjustable chest pad with strap, knee board with straps, footboard with blocks, figure 8 toe and ankle straps, adjustable back and hip strap and removable middle board. Safety position lock. Positive retracting stand. Adjustable birch plywood lapboard, 19 by 24 inches. Blue denim upholstery. Five inch casters. Base width 27 inches; base length 43 inches. 84 pounds. Safety position lock, adjustable brakes. Support pads adjust from 6 to 13 1/2 inches in width. Maximum height adjusts from 40 to 24 inches high. 200 pound capacity.

  51. QUADRIPOISE NARROW BASE ADULT (MODEL 5345) & QUADRIPOISE NARROW BASE YOUTH (MODEL 5346)

    Pushbutton height adjustable cane with four legs and low center of gravity. Center shaft placed through reinforcing base plate with legs at right angle to shaft. Shaft is offset so cane can be held close to body. Contoured grip and rubber safety tips. Locknut silencer. Rattle free. Base 5 by 7 inches adult height 29 to 38 inches. Youth height 23 to 32 inches.

  52. QUADRIPOISE WIDE BASE ADULT (MODEL 5340) & QUADRIPOISE WIDE BASE YOUTH (MODEL 5341)

    Pushbutton height adjustable cane with four legs and low center of gravity. Center shaft placed through base plate with legs at right angle to shaft. Shaft is offset so cane can be held close to body. Contoured grip and rubber safety tips. Locknut silencer, rattle free. Base 7 by 11 inches, weight 2 pounds. Adult height 29 to 38 inches. Youth height 23 to 32 inches.

  53. QUICK CHANGE 3-IN-1 BED SYSTEM (MODELS BG00, BG22, BG33, & BG672)

    Hospital bed system. Consists of basic split spring, standard hi/low bed ends, motor, motor control unit and crank all purchased separately. Bed converts from manual hi/low to semi electric, to all electric. No tools needed. Can be done with patient in bed. Basic spring steel channel frame. 84 zinc coated helical springs. Bed ends 4 post construction with oak laminate panels. 3 inch ball bearing casters. 9 inch height adjustment: 13 1/2 inch low spring height, 22 1/2 inch high spring height. Head adjusts to 60 degree sitting position. Knee to 45 degree position. Six function patient control pendant available. OPTIONS: traction, trapeze, side rails. POWER: Electric models use 115 volt 60 H2 power. DIMENSIONS: 86 x 35 inches. CAPACITY: Maximum capacity 500 pounds.

  54. QUICKIE 2

    The Quickie 2 is a manual drive, ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, and 17 inches. Seat widths are .5 inch narrower than the frame. Three back heights are offered: low, 8.5 to 12 inches; medium, 12 to 15.5 inches; and tall, 15.5 to 19 inches. The standard backrest includes push handles and the optional depth-adjustable backrest includes stroller handles. Swing-away adjustable stroller handles are available. Optional solid seats and backs are also offered. CUSHIONS: A 2-inch seat cushion and a back cushion are optional. UPHOLSTERY: Sling back and seat upholstery are standard. ARMRESTS: Padded swing-away armrests are standard. Flip-back, adjustable-locking flip-up, height-adjustable with standard or full-length pads, or height-adjustable flip-back armrests with standard or full-length pads are optional. BRAKES: High-push wheel locks are standard; high-scissor or high-pull wheel locks are available at no charge. CASTERS: Pneumatic 8-inch casters are standard. Pneumatic 6-inch, 6- or 8-inch polyurethane, or 5-inch low-profile polyurethane casters are offered at no extra charge. 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 24 inches in diameter; 20- and 22-inch wheels are offered at no charge. 26-inch wheels are extra cost options. Pneumatic tires are standard. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Swing-away 70- or 90-degree footrests with composite footplates and heel loops are standard. Kid's angle adjustable footplates are offered at no charge. Foam, adult angle-adjustable or extended footrests are optional. A 90-degree footboard or platform flip-up footrest are also available. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 250 pounds. WEIGHT: 27 pounds. WARRANTY: Lifetime frame guarantee.

  55. QUICKIE 2 KIDS

    The Kids Quickie 2 is a child's manual lightweight wheelchair designed to accommodate growth through its modular component system. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, and 17 inches. Seat widths are .5 inch narrower than the frame. Three back heights are offered: low, 8.5 to 12 inches; medium, 12 to 15.5 inches; and tall, 15.5 to 19 inches. The standard backrest includes push handles and the optional depth-adjustable backrest includes stroller handles. Swing-away adjustable stroller handles are available. Optional solid seats and backs are also offered. CUSHIONS: An optional 2-inch seat cushion and an optional back cushion are available. UPHOLSTERY: Sling back and seat upholstery are standard. ARMRESTS: Padded swing-away armrests are standard. Flip-back, adjustable-locking flip-up, height-adjustable with standard or full-length pads, or height-adjustable flip-back armrests with standard or full-length pads are optional. BRAKES: High-push wheel locks are standard; high-scissor and high-pull wheel locks are available at no charge. CASTERS: Pneumatic 8-inch casters are standard. Pneumatic 6-inch, 6- or 8-inch polyurethane, or 5-inch low-profile polyurethane casters are offered at no extra charge. 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 24 inches in diameter; 20- and 22-inch wheels are offered at no charge. 26-inch wheels are extra cost options. Pneumatic tires are standard. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Swing-away 70- or 90-degree footrests with composite footplates and heel loops are standard. Child's angle-adjustable footplates are offered at no charge. Foam, adult angle-adjustable, or extended footrests are optional. A 90-degree footboard and platform flip-up footrest are also available. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 250 pounds. WEIGHT: 21 pounds. WARRANTY: Lifetime frame guarantee.

  56. QUICKIE 2HP

    The Quickie 2HP is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, 17, and 18 inches. Seat widths are .5 inch narrower than the frame. Three back heights are offered: low, 8.5 to 12 inches; medium, 12 to 15.5 inches; and tall, 15.5 to 19 inches. Push handles are available at no charge; stroller handles are available at extra cost. Optional solid seats and backs are also offered. CUSHION: A 2-inch seat cushion and a back cushion are optional. UPHOLSTERY: Sling back and seat upholstery are standard. ARMRESTS: Armrests are optional. Padded swing-away, flip-back, adjustable-locking flip-up, height-adjustable with standard or full-length pads, or height-adjustable flip-back armrests with standard or full-length pads are available. BRAKES: Low wheel locks are standard; high-scissor, high-push, or high-pull wheel locks are available at no charge. CASTERS: 5-inch low-profile polyurethane casters are standard. 3-inch micros and 6-inch pneumatic or semi-pneumatic casters are offered at no extra charge. 8-inch pneumatic or polyurethane casters or 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 24 inches in diameter; 20- and 22-inch wheels are offered at no charge. 26-inch wheels are extra cost options. Pneumatic tires are standard. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Quickie Basketball, tennis and heat-treated basketball and tennis wheels are available, as are curved axle plates, amputee axle plates, and one-arm drive. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Foam footplates with leg strap are standard and composite footplates with heel loops are offered at no charge. Adult angle-adjustable or platform flip-up footrests are also available. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 250 pounds. WEIGHT: 22 pounds. WARRANTY: Lifetime frame guarantee.

  57. QUICKIE 2HP TITANIUM

    The Quickie 2HP Titanium is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding titanium frame with titanium hardware in a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, 17, and 18 inches. Seat widths are .5 inch narrower than the frame. Three back heights are offered: low, 8.5 to 12 inches; medium, 12 to 15.5 inches; and tall, 15.5 to 19 inches. Push handles are available at no charge; stroller handles are available at extra cost. Optional solid seats and backs are also offered. CUSHION: A 2-inch seat cushion and a back cushion are optional. UPHOLSTERY: Sling back and seat upholstery are standard. ARMRESTS: Armrests are optional. Padded swing-away, flip-back, adjustable-locking flip-up, height-adjustable with standard or full-length pads, or height-adjustable flip-back armrests with standard or full-length pads are available. BRAKES: Low wheel locks are standard; high-scissor, high-push, or high-pull wheel locks are available at no charge. CASTERS: 5-inch low-profile polyurethane casters are standard. 3-inch micros and 6-inch pneumatic or semi-pneumatic casters are offered at no extra charge. 8-inch pneumatic or polyurethane casters or 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 24 inches in diameter; 20- and 22-inch wheels are offered at no charge. 26-inch wheels are extra cost options. Pneumatic tires are standard. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Quickie Basketball, tennis and heat-treated basketball and tennis wheels are available, as are curved axle plates, amputee axle plates, and one-arm drive. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Foam footplates with leg strap are standard and composite footplates with heel loops are offered at no charge. Adult angle-adjustable or platform flip-up footrests are also available. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 250 pounds. WEIGHT: 22 pounds. WARRANTY: Lifetime frame guarantee.

  58. QUICKIE EX Picture of QUICKIE EX

    The Quickie EX is a lightweight, sports wheelchair custom built to user specifications. FRAME: A choice of a 16- or 18-inch frame is standard. Optional 14-, 15-, and 17-inch widths are also available. A choice of red, blue, or black frame colors is standard. Eleven optional colors are also offered. Anti-tip tubes are optional. SEAT: Standard seat widths are 15.5 and 17.5 inches. Optional widths include 13.5, 14.5, and 16.5 inches. The backrest is available in 14- and 17-inch heights. Optional push handles are available on the backrest. Side guards are optional. CUSHION: Cushions are optional. UPHOLSTERY: Sling seat and back upholstery are standard. ARMRESTS: Armrests are optional. Height-adjustable armrests with standard or full-length pads are available. BRAKES: High-push wheel locks are standard and high-pull wheel locks are available at no charge. Extension handles and grade aids are optional. CASTERS: 5-inch low- profile polyurethane casters are standard. Six-inch polyurethane or 6-inch pneumatic casters are available at no extra charge. WHEELS: 22- or 24-inch Mag wheels with quick-release axles are standard and spoked wheels are offered at no extra charge. Pneumatic tires are standard. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, latex tubular, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Rigid footrests with leg straps are standard. OPTIONS: Spoke guards, backpack, seat pouch, positioning belts, tray, and more. WEIGHT: 24 pounds. GUARANTEE: Lifetime frame warranty.

  59. QUICKIE GP AND QUICKIE GPV Picture of QUICKIE GP AND QUICKIE GPV

    The Quickie GP and Quickie GPV are lightweight adult manual wheelchairs for sport and daily use. FRAME: One-piece rigid frame with a 70-degree front frame bend. The standard frame is 10 inches high in the front and 9 inches high in the rear. Optional short, tall, and custom frames are also available. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 6 optional colors with black chair parts. Rear anti-tip tubes are optional. SEAT: The seat is .5-inch narrower than the frame. A 14- or 16-inch deep seat is standard. Optional 15-, 17-, or 18-inch deep seats are available. The standard fixed, non-folding backrest is available in a choice of heights from 8 to 16 inches in one-inch increments. A folding, adjustable backrest in a choice of heights is available at an extra charge. Push handles and stroller handles are offered for the folding backrest. CUSHION: A 2-inch cushion is available. UPHOLSTERY: Sling upholstery. Adjustable upholstery is available for the folding backrest. ARMRESTS: Armrests are optional. Padded swing-away or height-adjustable armrests with full-or desk-length pads are available. BRAKES: High-push wheel locks are standard and high-pull are available at no extra charge. High-scissor wheel loocks are optional. CASTERS: 5-inch polyurethane casters are standard and 6-inch pneumatic or semi-pneumatic casters are available at no charge; 3-inch micros are offered at an additional cost. WHEELS: 24-inch mag wheels with aluminum handrims, pneumatic tires, stainless steel quick-release axles, and adjustable axle plates are standard; high pressure clincher tires and turbo tread are available at no charge. Options include 22- and 26-inch wheels, spoke wheels, pneumatic tires with airless inserts, kevlar tires, latex tubular tires, and full- or low-profile polyurethane tires. Also available are basketball and tennis or heat-treated basketball or tennis wheels, titanium axles, double-slot index or amputee axle plates, plastic-coated handrims, and handrim projections. FOOTRESTS: A rigid footrest with a leg strap is standard on both chairs. Platform or flip up platform legrests with leg straps are available on both models at extra cost. Composite footplates with heel loops, foam foot plates, angle-adjustable foot plates with heel loops, and a 90-degree footboard are extra-cost options on the GP. OPTIONS: Backpack, seat pouch, spoke guards, side guards, trays, and others. CAPACITY: 250 pounds. WARRANTY: Lifetime frame guarantee.

  60. QUICKIE GP SWING-AWAY Picture of QUICKIE GP SWING-AWAY

    The Quickie GP Swing-away is a lightweight adult manual wheelchair for sport and daily use. FRAME: One-piece rigid frame. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 3 optional colors with black chair parts. Rear anti-tip tubes are optional. SEAT: The seat is .5-inch narrower than the frame. A 14- or 16-inch deep seat is standard. Optional 15-, 17-, or 18-inch deep seats are available. The standard fixed, non-folding backrest is available in a choice of heights from 8 to 16 inches in one-inch increments. A folding, adjustable backrest in a choice of heights is available at an extra charge. Push handles and stroller handles are offered for the folding backrest. CUSHION: A 2-inch cushion is available. UPHOLSTERY: Sling upholstery. Adjustable upholstery is available for the folding backrest. ARMRESTS: Armrests are optional. Padded swing-away or height-adjustable armrests with full-or desk-length pads are available. BRAKES: High-push wheel locks or high-pull wheel locks are standard. High-scissor wheel loocks are optional. CASTERS: 5-inch low-profile polyurethane casters are standard and 6- or 8-inch pneumatic, 6-inch semi-pneumatic, or 8-inch polyurethane casters are available at no charge; 3-inch micros or 8 x 2 inch pneumatic casters or pneumatic casters with airless inserts are offered at an additional cost. WHEELS: 24-inch mag wheels with aluminum handrims, pneumatic tires, stainless steel quick-release axles, and adjustable axle plates are standard; turbo tread is available at no charge. Options include 22- and 26-inch wheels, spoke wheels, high-pressure clincher tires, pneumatic tires with airless inserts, kevlar tires, latex tubular tires, and full- or low-profile polyurethane tires. Also available are basketball and tennis or heat-treated basketball or tennis wheels, titanium axles, double-slot index or amputee axle plates, plastic-coated handrims, and handrim projections. FOOTRESTS: A choice of 60-, 70-, or 90-degree hangers is standard; 70-degree V hangers are available at an extra charge. Swing-away footrests with leg straps are standard. . Elevating or 90-degree elevating footrests are available at extra cost. Composite footplates with heel loops are available at no charge. Foam foot plates, angle-adjustable foot plates with heel loops, platform flip-up footplates, and a 90-degree footboard are extra-cost options. OPTIONS: Backpack, seat pouch, spoke guards, side guards, trays, and others. CAPACITY: 250 pounds. WARRANTY: Lifetime frame guarantee.

  61. QUICKIE GPS & QUICKIE GPS TI

    The Quickie GPS and Quickie GPS TI are lighweight sports wheelchairs designed for daily or sports use. FRAME: The frame is offered in a coice of widths from 14 to 20 inches. The standard frame height is adjustable 17 to 20 inches in the front and 14 to 20 inches in the rear. An extra-cost tall option provides a frame height of 18 to 21 inches in the front and 16 to 21 inches in the rear. The frame is available in a choice of 11 standard and 6 optional colors. Anti-tip tubes are optional. SEAT: An aluminum seat frame with a folding backrest is standard. An optional titanium seat frame is available on the GPS Titanium. The seat is available in a selection of depths from 14 to 18 in one-inch increments. The standard folding backrest adjusts from 11 to 15 inches high. Other height ranges are available at an extra cost. Optional push handles are available on the backrest. CUSHION: A 2-inch cushion is available. UPHOLSTERY: Sling seat and back upholstery is standard. Optional adjustable upholstery is available on the backrest. ARMRESTS: Armrests are optional. Padded swing-away and height adjustable armrests with standard or full-length pads are available. Aluminum, fabric, or plastic side guards designed to fold down automatically when the backrest is folded are also available. BRAKES: High-scissor wheel locks are standard. High-push or high-pull wheel locks are available at no charge. CASTERS: 5-inch low profile polyurethane casters are standard; 3-inch micros, 6-inch pneumatic casters, or 6-inch polyurethane casters are available at no charge. WHEELS: 24-inch spoke wheels with pneumatic tires, aluminum handrims, and stainless steel axles are standard. 24-inch mag wheels, 22-inch wheels, full- or low-profile polyurethane tires, high-pressure clincher tires, and turbo tread are available at no charge. Optional 26-inch mag or spoke wheels, tennis or basketball set ups, titanium axles, plastic-coated handrims, and handrim projections are available. Pneumatic tires with airless inserts, latex tubular tires, and Kevlar tires are also available. .FOOTRESTS: A rigid platform with legstrap is standard. CAPACITY: 250 pounds. WEIGHT: 20.5 pounds (GPS); 19.5 pounds (GPS TI). GUARANTEE: Lifetime frame warranty.

  62. QUICKIE KAN SKI SUPER COMP

    The Quickie Kan Ski Super Comp is a water ski for persons with mobility disabilities (paraplegia, quadriplegia, spina bifida, or lower extremity amputation), persons with cerebral palsy, or other individuals interested in water sit-skiing. This sit water ski was designed for advanced skiers in high performance or competition skiing. This model has a competition rear bevel, concave bottom and a pro jet fin. MATERIALS: The Super Comp is made of foam core, wet-wrapped graphite fiberglass; footplate and cage frame are made of aluminum. UPHOLSTERY: Adjustable Cordura material; foam padded side rails and knee bar with packcloth cover; neoprene covered footplate and strap. DIMENSIONS: 6 feet 7 inches in length. Cage widths range from 13 to 17 inches. Cage heights available in Short, Medium, or Tall, based on the user's height and/or lower leg length. CAPACITY: 250 pounds. WEIGHT: 17 pounds. COLORS: Choice of 11 standard colors; 3 custom colors are available for an additional $105; 3 custom splatter patterns are available for an additional $340; special effects/custom paint jobs are available for an additional $420.

  63. QUICKIE KIDZ

    The Quickie Kidz is a lightweight child's manual wheelchair available in standard or reverse configurations. The reverse figuration features the large wheels in front. FRAME: This rigid frame chair is available in 10-, 11-, 12-, 13-, and 14-inch widths. This chair is available in a choice of regular frame length (8, 9, or 10 inches) or a long frame (11, 12, 13, or 14 inches). A choice of 11 standard and 3 custom frame colors is available. Rear anti-tips are standard and front anti-tips are available. SEAT: Seat widths are .5 inch narrower than the frame width and seat depths range from 8 to 14 inches. A non-folding adjustable backrest is standard. The regular backrest adjusts from 8 to 10 inches and the tall backrest adjusts from 10 to 12 inches. A regular or tall folding backrest is available at extra cost. Optional stroller handles are available on the backrest. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Sling seat and back upholstery are standard. ARMRESTS: Standard (4.5 to 5.75 inches high) or tall (5.5 to 6.75 inches) armrests are included. BRAKES: High-push wheel locks are standard and high-pull wheel locks are offered at no charge. Brake extensions are optional. CASTERS: 3-inch micro casters are standard and low-profile 5-inch polyurethane casters are available at no extra charge. WHEELS: 12-, 16-, or 20-inch mag or spoke wheels are available. Pneumatic tires are standard.and full-profile polyurethane tires are available at no extra cost. Pneumatic tires with airless inserts tires are extra-cost options. The chair is standard without handrims; aluminum handrims are offered at no charge and plastic-coated handrims and projections are available at an additional charge. FOOTRESTS: Regular (8.5 to 10.75 inches) or long (11 to 13.75 inches) footrests with leg straps are standard. High-mount footrests are optional. OPTIONS: Spoke guards, tray, touch-up paint, transfer board, and a tool kit. CAPACITY: 150 pounds. WEIGHT: 14 pounds. GUARANTEE: Lifetime frame warranty.

  64. QUICKIE LX

    The Quickie LX is an adult lightweight wheelchair designed for use by people with mobility disabilities. FRAME: Folding frame in a choice of eleven standard colors and three optional colors. The standard frame is available in a choice of 14-, 16-, or 18-inch widths; optional 12-, 13-, 15-, 17-, or 19-inch wide frames are available. Front or rear anti-tips are optional. SEAT: Standard seat depths are 14 or 16 inches; optional depths are 12, 13, 15, 17, or 18 inches. The seat width is .5 inch narrower than the frame width. The standard backrest adjusts from 16 to 19 inches high and is eqipped with 8-degree angle push handles. A backrest that adjusts from 14 to 17 inches high, straight push handles, positioning belts, a solid seat, and a solid back are optional. CUSHION: An optional 2-inch cushion is available. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with the standard pad are included and a full-length pad is available at no charge. Padded swing-away armrests and height-adjustable, flip-back armrests are extra-cost options. Fabric and plastic side guards are also available. BRAKES: High push-to-lock wheel locks are standard and high pull-to-lock are available at no charge. Extension handles and grade aids are optional. CASTERS: Pneumatic 8-inch casters are standard; 5-inch low profile polyurethane, 6-inch pneumatic or polyurethane, and 8-inch polyurethane casters are availalable at no extra charge. WHEELS: 24-inch mag wheels with pneumatic tires are standard and 22-inch mag wheels are offered at no charge. Spoked wheels, 20-inch wheels, pneumatic tires with airless inserts, and full- or low-profile polyurethane tires are optional. Aluminum handrims are standard. Plastic-coated handrims and vertical or oblique projections are optional. Quick release axles, quad release axle nuts, and spoke guards are available. FOOTRESTS: 70-degree front riggings with composite footplates and heel loops are standard and 60- or 90-degree riggings are offered at no charge. Options include articulating or elevating legrests, foam footplates, extended footplates, angle-adjustable footplates, and leg straps. OPTIONS: Backpack, seat pouch, armrest pouch, caddy, crutch holder, tray, transfer board, tool kit, and touch-up paint. CAPACITY: 250 pounds. WEIGHT: 28 pounds.

  65. QUICKIE LXI

    The Quickie LXI is an adult lightweight wheelchair designed for use by people with mobility disabilities. FRAME: Folding frame in a choice of eleven standard colors and three optional colors. The standard frame is available in a choice of 14-, 16-, or 18-inch widths; optional 12-, 13-, 15-, 17-,or 19-inch wide frames are available. Front or rear anti-tips are optional. SEAT: Standard seat depths are 14 or 16 inches; optional depths are 12, 13, 15, 17, or 18 inches. The seat width is .5 inch narrower than the frame width. The standard backrest adjusts from 16 to 19 inches high and is eqipped with 8-degree angle push handles. A backrest that adjusts from 14 to 17 inches high and straight push handles are available at no charge. Positioning belts, a solid seat, and a solid back are extra cost options. CUSHION: An optional 2- inch cushions are available. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with the standard pad are included and a full-length pad is available at no charge. Padded swing-away armrests, height-adjustable, and height-adjustable, flip-back armrests are extra-cost options. Fabric and plastic side guards are also available. BRAKES: High push-to-lock wheel locks are standard and pull-to-lock are available at no charge. Extension handles and grade aids are optional. CASTERS: Pneumatic 8-inch casters are standard; 5-inch low profile polyurethane, 6-inch pneumatic or polyurethane, and 8-inch polyurethane casters are availalable at no extra charge. Pneumatic 8 x 2 inch casters and pneumatic 8 x 2 inch pneumatic casters with airless inserts are extra-cost options. WHEELS: Threaded axles with adjustable axle plates and 24-inch mag wheels with pneumatic tires are standard; 22-inch mag wheels are offered at no charge. Spoked wheels, 20-inch wheels, pneumatic tires with airless inserts, Kevlar, Kevlar with airless inserts, high-pressure clincher, and full- or low-profile polyurethane tires are optional. Aluminum handrims are standard. Plastic-coated handrims and vertical or oblique projections are optional. Quick- release axles, quad release axle nuts, and spoke guards are available. FOOTRESTS: 70-degree front riggings with composite footplates and heel loops are standard and 60- or 90-degree riggings are offered at no charge. Seventy-degree V hangers are available for an extra charge. Options include articulating or elevating legrests, a 90-degree footboard, foam footplates, extended footplates, angle-adjustable footplates, impact guards, toe loops, and leg straps. OPTIONS: Backpack, seat pouch, armrest pouch, caddy, crutch holder, tray, transfer board, tool kit, and touch-up paint. CAPACITY: 250 pounds. WEIGHT: 28 pounds.

  66. QUICKIE M6 BARIATRIC WHEELCHAIR Picture of QUICKIE M6 BARIATRIC WHEELCHAIR

    The Quickie M6 is a bariatric folding adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 26 x 20 inches. The frame is high- strength steel with interchangeable frame components that allow the chair to be adjusted for the rider’s changing needs. This chair is available in 18 different colors. SEAT (LxW): 18 to 22 x 22 to 30 inches. The floor-to-seat height is 17 inches. CASTERS: 5 to 8 x 2 inch front casters. WHEELS: 24-inch rear wheels. CAPACITY: 650 pounds. WEIGHT: 53 pounds. WARRANTY: Manufacturer guarantees the frame for the lifetime of the original purchaser. A 2-year warranty on manufacturer-made parts and components against defects in materials and workmanship is also included. DELIVERY TIME: Next day, 2-day, or 3-day shipping available.

  67. QUICKIE P100 AND QUICKIE P110 Picture of QUICKIE P100 AND QUICKIE P110

    The Quickie P100 and Quickie P110 are powered adult wheelchairs. FRAME: The P100 features a rigid, non-folding frame and the P110 has a folding frame. Frames are available in a choice of 14-, 16, and 18-inch widths. The P100 is also available in a 20-inch frame at extra cost. Both models come in a standard choice of blue, black, or red finishes; 11 optional colors are also available. CONTROLS: Integral joystick control with a choice of right or left mounting. A heavy-duty remote and swing-away retractable mounts and a Smart Pad programmer to customize joystic sensitivity are also available. Both models are also sold without electronics. RWD: Rear wheel direct drive on both models. SEAT: A 16-inch seat depth is standard; depths of 14, 15, 17, and 18 inches are optional. The P100 features a folding backrest with push handles. The standard backrest adjusts from 16 to 17 inches tall. An optional tall version adjusts from 18 to 19 inches high. The P110 includes a non-folding backrest in a choice of 14-, 17-, or 19-inch heights. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Black sling upholstery is standard. ARMRESTS: Height-adjustable armrests with standard- or full-length pads are standard. Flip-back, height-adjustable armrests with standard- or full-length pads are optional. BRAKES: Push-to-lock wheel locks are standard and pull-to-lock wheel locks are offered at no charge. CASTERS: 8-inch pneumatic front casters are standard. Airless inserts are available. WHEELS: 12-inch pneumatic rear drive wheels. Airless inserts are optional. FOOTRESTS: 60-, 70-, or 90-degree swing-away footrests with adjustable, flip-up composite footplates with heel loops are standard. Elevating or articulating legrests and angle-adjustable, platform flip-up, or extended footplates or a 90-degree footboard are optional. OPTIONS: Backpack, seat belt, side guards, and a tray. POWER: 24 volt system using two lead acid or gel batteries (not included). A dual-mode battery charger is included. SPEEDS: 5 miles per hour; 20 mile range per charge. CAPACITY: 250 pounds. WEIGHT: 65 pounds (P100) and 81 pounds (P110) not including batteries. WARRANTY: Lifetime frame guarantee; 2 year integral controller box warranty; 2 year main controller warranty; 1 year remote joystick warranty.

  68. QUICKIE P190

    The Quickie P190 is a powered wheelchair designed for adult users. FRAME: The rigid frame is available in a choice of 11 standard colors and 3 optional colors.The standard frame is available in a choice of 16 or 20 inches wide; a 20-inch frame is available at an extra charge. Anti-tip tubes are standard. CONTROLS: A remote joystick with programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. The chair is also sold without electronics. RWD: Rear drive wheels. SEAT: A parapak sling seat with a non-folding, adjustable back is standard. Sixteen- or 18-inch wide seats are standard. A 20-inch seat is available at an extra charge. Seats are 14 to 18 inches deep, in one-inch increments. The seat height depends upon the caster and drive wheels selected The standard backrest adjusts from 17 to 18 inches high. Other back heights are optional, as are three folding, angle-adjustable backrests. Push handles are included with the backrest. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Parapak sling upholstery is standard; a suspension sling is available. ARMRESTS: Dual-post, height-adjustable armrests are included. Height-adjustable armrests with standard or full-length pads are available. BRAKES: Push-to-lock wheel locks are standard. Six-inch extension handles are available. WHEELS: 12-inch mag wheels with pneumatic tires are standard. 14-inch mag wheels with pneumatic tires and airless inserts or pneumatic tires or 12-inch mag wheels with pneumatic tires and airless inserts are optional. FOOTRESTS: Swing-away legrests with composite footplates and heel loops are included. Adult angle-adjustable footplates, elevating legrests, and toe loops are optional. OPTIONS: Backpack, seat pouch, positioning belts, touch-up paint, trays, and others. POWER: Uses 2 gel or lead acid batteries (not included). A dual mode battery charger is included. SPEEDS: 5 miles per hour with 12-inch wheels and 6 miles per hour with 14-inch wheels. WEIGHT: 84 pounds without batteries. CAPACITY: 250 pounds. WARRANTY: A lifetime warranty is offered on the frame. A 2-year warranty is offered on the main controller with 1-year coverage for the joystick.

  69. QUICKIE P200 Picture of QUICKIE P200

    The Quickie P200 is a powered wheelchair designed for adult users. FRAME: The standard frame is available in 16- and 18-inch widths. 14-, 15-, 17-, 19-, and 20-inch frames are available at an extra charge. A long frame is also available. The frame is available in a choice of 11 standard colors and 6 optional colors. Anti-tip tubes are standard. CONTROLS: A remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. This chair is also available without electronics. RWD: Rear-wheel direct drive. SEAT: Standard seat depths are 14 to 18 inches, in one-inch increments. 19- or 20-inch deep seats are available with the long frame. The standard seat is 18 inches high; a 19-inch high seat is available. A medium (17 to 18 inches high) folding backrest with push handles is standard. A low (15 to 16 inches) and a tall (19 to 20 inches) option are available. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Parapak sling back and seat upholstery is standard. Suspension upholstery is optional. ARMRESTS: Dual-post armrests with standard or full-length pads are standard. Dual-post, height- adjustable armrests and height-adjustable armrests are available. BRAKES: Push-to-lock wheel locks are standard and pull-to-lock wheel locks are available at no cost. Brake handle extensions are optional. CASTERS: 8-inch pneumatic casters are standard. Airless inserts are available. WHEELS: 24-inch spoke wheels with pneumatic tires and aluminum handrims are standard; mag wheels are available at no extra charge. Pneumatic tires with airless inserts, full- or low-profile polyurethane, kevlar or kevlar with airless inserts, or high-pressure clincher tires are available. Plastic-coated handrims and projections are also available. FOOTRESTS: Swing-away legrests with composite footplates and heel loops are included. Angle-adjustable or extended footplates are optional. OPTIONS: Backpack, manual conversion kit, seat pouch, positioning belts, touch-up paint, trays, and others. POWER: Uses 2 gel or lead acid batteries (not included). A dual mode battery charger is included. SPEEDS: Maximum speed is seven miles per hour for up to 35 miles. CAPACITY: 250 pounds. WEIGHT: 88 pounds (without batteries). WARRANTY: A lifetime warranty is offered on the frame. A 2-year warranty is offered on the main controller with 1-year coverage for remote joystick.

  70. QUICKIE P210 POWER RECLINE SYSTEM (PRS)

    The Quickie P210 is an adult powered reclining wheelchair designed for indoor or outdoor use. FRAME: The frame is available in 16- and 18-inch widths in regular and long configurations and is available in a choice of 11 standard and 6 optional colors. CONTROLS: A programmable remote joystick with a programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. This chair is also available without electronics. RWD: Rear-wheel direct drive. SEAT: A solid seat pan is standard. The seat frame is available in a choice of 16 or 18 inches wide and 16 to 20 inches deep, in one-inch increments. The standard adjustable-shear power reclining backrest adjusts from 21 to 22 inches high and a backrest that adjusts from 23 to 24 inches high is available at no extra charge. A backrest adjustable from 25 to 26 inches is an extra-cost option. A choice of a small or large headrest is included. POWER RECLINE: A power recline system is standard. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Sling back and seat upholstery is standard. ARMRESTS: Reclining armrests with standard pads are included. CASTERS: 8-inch pneumatic casters are standard. Airless inserts are available. WHEELS: 10-inch mag wheels with pneumatic tires. Pneumatic tires with airless inserts are optional. FOOTRESTS: Swing-away legrests with composite footplates and heel loops are included. Power elevating legrests with calf pads and angle-adjustable or extended aluminum footplates are optional. OPTIONS: Backpack, seat pouch, positioning belts, touch-up paint, trays, and others. POWER: Uses 2 gel or lead acid batteries (not included). A dual mode battery charger is included. SPEEDS: Maximum speed is seven miles per hour with a range of up to 37 miles. CAPACITY: 250 pounds. WEIGHT: 122 pounds without batteries and 82 pounds without batteries, armrests, and legrests. WARRANTY: A lifetime warranty is offered on the wheelchair and backrest frames frame. A 2-year warranty is offered on the main controller with 1-year coverage for remote joystick and the reclining mechanism.

  71. QUICKIE P-220 Picture of QUICKIE P-220

    The Quickie P-220 is a powered wheelchair designed for individuals with severe physical disabilities, spinal cord injuries, and mobility disabilities. FRAME: Overall width 24.75 inches and 27.75 inches. The frames are available in a variety of colors. CONTROLS: Integral joystick controller provides digital speed and tilt-control. Breath control, chin control, penta switch, and proportional head control are available. Available single switch controls include the Buddy Button (see separate entry), disc, grasp, micro light, plate, ribbon, soft, treadle, and wobble switches. The freewheel release levers completely disengage the gear system for freewheel propulsion. DRIVE: Mid-wheel drive for maneuverablilty and curb climbing ability. SEAT: Seat widths range incrimentally from 14 inches to 20 inches, 22 inches, and 24 inches. Seat depths range incrimentally from 14 inches to 20 inches. The seat base is offered in a choice of a parapak sling or an aluminum pan. CUSHION: Two-inch cushion. UPHOLSTERY: Back upholstery in a choice of parapak or a Jay solid back rest. ARMRESTS: Dual post flip-back, dual post flip-back height adjustable, and single-post height adjustable armrests are offered. BRAKES: Push to lock wheel lock with extension handle. CASTERS: Eight- or nine-inch pneumatic casters with or without airless inserts. WHEELS: The drive wheels are 12 x 4 inches or 12 x 3 inches, both available with or without airless inserts. Knobby tread tires or V Groove tires are available. PosiDrive technology features tapered axles, conical hubs and lug nuts. FOOTRESTS: The hanger is available in 70-degree fixed straight, 70-degree swing-away, 80- degree fixed tapered, 90-degree swing-away, or elevating. Available footrests includecomposite footplates with heel loops, adult angle adjustable with heel loops, kids angle adjustable with leg strap, solid one piece, two piece locking with heel loops, and multipositional. An extra leg strap is available. POWER: Uses 22 NF, Group 24 battery. SPEEDS: 6.5 miles per hour maximum speed with a range of up to 30 miles. CAPACITY: 300 pounds. WEIGHT: Approximately 115 pounds without batteries. WARRANTY: Sunrise guarantees the frame for the lifetime of the original purchaser and includes a two-year warranty on Sunrise made parts and components against defects in materials and workmanship.

  72. QUICKIE P-222 SE Picture of QUICKIE P-222 SE

    The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are available. MIDWHEEL DRIVE: Offers mid-wheel drive for maneuverability (26 inch turn radius minimum) and curb climbing ability (for approximately 4 inch curbs). PosiDrive technology features tapered axles, conical hubs and lug nuts which increases the strength of the drive train. Freewheel release levers are well protected and easy to access. These levers completely disengage the gear system providing easy freewheel push motion. SEAT: 14 inches to 20 inches wide in one-inch increments, or 22 inches or 24 inches wide. The seat depth is available in 14 to 20 inches in one-inch increments. Available front seat heights are 18 inches, 19 inches and 20 inches. Sling parapak, or pan aluminum seats are available. Back heights are low (15.5 inches), medium (17.5 inches) and tall (19.5 inches). CUSHION: A two-inch cushion is available. ARMRESTS: Dual post flip-back, dual post flip-back height- adjustable, and single post height-adjustable styles are available. BRAKES: Available in push to lock with a six-inch extension. CASTERS: 8- or 9-inch pneumatic wheels with or without airless inserts are available. WHEELS: The drive wheel types include 12 inch x 4 inch or 12 inch x 3 inch wheels with pneumatic tires with or without airless inserts. Knobby tread tires and V groove tires are available. FOOTRESTS: Straight or tapered fixed front hangers are available. The footrests offered include composite with heel loops, angle adjustable with heel loops, aluminum, solid one piece, and two-piece locking with heel loops. POWER: Batteries. SPEEDS: The maximum speed is 8.5 miles per hour. CAPACITY: Weight capacity is 350 pounds. WEIGHT: Approximately 115 pounds without the battery. WARRANTY : Sunrise guarantees the frame for the lifetime of the original purchaser and includes a 2 year warranty on Sunrise made parts and components against defects in materials and workmanship.

  73. QUICKIE P300 Picture of QUICKIE P300

    The Quickie P300 is a powered wheelchair designed for adult users. FRAME: The overall frame width ranges from 24 5/8 inches to 28.25 inches depending upon the seat width and caster size. The regular frame is 33 inches long and the long frame is 35 inches long without footrests. The frame is constructed of tri-cell reinforced rectangular tubing and is available in a choice of 11 standard colors and 3 optional colors. The frame constructions allows components and accessories to be bolted directly to the frame. CONTROLS: A programmable remote joystick and controller with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. The chair is also sold without electronics. SEAT: An adjustable-angle suspension seat frame with shock absorbers with the regular base and a solid seat pan is standard; the long base is optional. A choice of light, medium, or heavy shock absorbers is standard. Standard seat widths and depths are 14 to 18 inches, in one-inch increments; 19- or 20-inch wide seats are available. The seat depth is adjustable. The seat height is available in a choice of an 18-inch front and 16.75- to 18-inch adjustable rear or a 19-inch front and a 17- to 19-inch adjustable rear. The standard folding, angle-adjustable backrest adjusts from 17 to 18 inches high. Other back heights are optional. Push handles are included with the backrest. CUSHION: A 2-inch cushions is optional. ARMRESTS: Dual-post armrests with standard or desk-length pads are included. Height-adjustable armrests or dual-post, height-adjustable armrests with standard or full-length pads are available. BRAKES: High push-to-lock wheel locks are standard. CASTERS: A choice of 8- or 9-inch pneumatic casters is standard. 8- or 9-inch airless inserts and 9-inch foam casters are available. WHEELS: 20-inch mag wheels with pneumatic tires are standard. 20-inch mag wheels with airless inserts are optional. FOOTRESTS: Swing-away legrests with composite footplates and heel loops are included. Adult angle-adjustable footplates, elevating legrests, and toe loops are optional. OPTIONS: Backpack, seat pouch, positioning belts, touch-up paint, trays, and others. POWER: Uses 2 gel or lead acid batteries (not included). A dual mode battery charger is included. The charger socket can be mounted in several locations for the convenience of the user. SPEEDS: Maximum speed is seven miles per hour fro a range of up to 35 miles. CAPACITY: Up to 150 pounds with light shock absorbers; 151 to 200 pounds with medium shock absorbers; 201 to 250 pounds with heavy shock absorbers. WEIGHT: 112 pounds without batteries. WARRANTY: A lifetime warranty is offered on the frame. A 2-year warranty is offered on the main controller with 1-year coverage for the joystick.

  74. QUICKIE P320

    The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. The chair is also sold without electronics. RWD: Rear-wheel direct drive. SEAT: A solid seat pan and standard solid seat frame is included; a wide seat frame is optional. Standard seat widths range from 14 to 20 inches, in one-inch increments. A choice of 14- to 18-inch seat depths is standatd; 19- or 20-inch depths are optional. The adjustable seat frame allows for a seat height from 17.5 to 19.5 inches; front and rear seat heights may be set separately. The standard backrest adjusts from 16 to 17 inches high. Other back heights are optional. A manual reclining backrest is also offered at extra cost. CUSHION: A 2-inch cushion is optional. ARMRESTS: Dual-post armrests with standard or full-length pads are included. Dual-post, height-adjustable armrests or height-adjustable armrests with standard or full-length pads are available. BRAKES: Push-to-lock wheel locks are standard and pull-to-lock wheel locks are available at no cost. Six-inch extension handles are available. CASTERS: 8-inch pneumatic casters are standard. 8-inch pneumatic casters with airless inserts are available. WHEELS: 10-inch mag drive wheels with pneumatic tires are standard; 10-inch mag drive wheels with pneumatic tires and airless inserts are available. FOOTRESTS: Swing-away legrests with composite footplates and heel loops are included. Adult angle-adjustable or extended footplates, elevating legrests, and toe loops are optional. OPTIONS: Manual wheelchair conversion kit, backpack, seat pouch, positioning belts, touch-up paint, trays, and others. POWER: Uses 2 gel or lead acid batteries (not included). A dual mode battery charger is included. SPEEDS: Maximum speed is seven miles per hour for a range of up to 37 miles. CAPACITY: 250 pounds. WEIGHT: 130 pounds (without batteries). WARRANTY: A lifetime warranty is offered on the frame. A 2-year warranty is offered on the main controller with 1-year coverage for the joystick.

  75. QUICKIE RECLINER Picture of QUICKIE RECLINER

    The Quickie Recliner is an adult or child manual drive wheelchair with reclining backrest. FRAME: Folding aluminum frame available in 11 standard and 3 custom colors. Frame widths available in 14 to 20 inches in 1-inch increments. The chair is 12.5 inches wide folded. The frame is available in kids, regular, and long configurations. Anti-tip tubes are included. SEAT: The reclining back is 24 inches high, includes a 10-inch headrest extension, and has infinite positioning capability within a 70-degree range. The standard backrest features dual-trigger manual release and a tension stabilizer bar for rigid back support. A sling back is available at no extra charge. The seat width is .5-inch narrower than the frame width. The standard seat is offered in a choice of 12- or 16-inch depths. Optional seat depths include 13, 14, 15, 17, and 18 inches. CUSHION: A 2-inch seat cushion is available. A back cushion is available at an extra charge with the sling back only. UPHOLSTERY: Sling seat upholstery is standard. ARMRESTS: Armrests are optional. Height- adjustable armrests with regular or full-length pads are available. BRAKES: High-push wheel locks are standard and high-pull wheel locks are available at no charge. CASTERS: Standard casters are 8-inch polyurethane; 5-inch low-profile polyurethane or 6-inch semi-pneumatic or pneumatic front casters are available at no extra cost. 8 x 2 inch pneumatic or pneumatic with airless insert casters are optional. WHEELS: 22 or 24 inch spoked or mag rear wheels with pneumatic tires are standard; full- or low-profile polyurethane tires are available at no extra cost. Pneumatic tires with airless inserts, high pressure clincher, and kevlar tires are available. Aluminum handrims are standard. Plastic coated handrims and projections are optional. FOOTRESTS: Swingaway footrests with several footplate options including articulating and elevating footrests. OPTIONS: Back pack, seat pouch, side guards, positioning belts, tray, and more. WEIGHT: 42 pounds, including footrests, headrest extension, and mag wheels. CAPACITY: 250 pounds. WARRANTY: Lifetime frame warranty.

  76. QUICKIE REVOLUTION

    The Quickie Revolution is a lighweight sports wheelchair designed for daily or sports use by adults. FRAME: Alternative compact folding 75-degree front frame. The frame is available in 14 to 20 inch widths and is offered in a choice of 11 standard and 3 optional colors with black chair parts. Anti-tip tubes are optional. SEAT: The seat is available in depths ranging from 14 to 18 inches in one-inch increments. See widths are .5 inch narrower than the frame width. A folding, height-adjustable backrest is standard. Optional push handles are available. CUSHION: A 2-inch cushions is available. UPHOLSTERY: Sling seat and back upholstery is standard. Adjustable upholstery is available. ARMRESTS: Armrests are optional. Padded swing-away armrests and height-adjustable armrests with standard or full-length pads are available. BRAKES: High-scissor wheel locks are standard. Swing-away wheel locks are available at no charge. CASTERS: 5-inch low profile polyurethane casters are standard; 3-inch micros or 6-inch polyurethane casters are available at no charge. WHEELS: 22- or 24-inch spoke or mag wheels with aluminum quick-release axles are available at no charge. 26-inch wheels are extra-cost options. Tennis or basketball set ups and titanium axles or quad-release axle nuts are available. Pneumatic tires are standard and turbo tread and high-pressure clincher tires are offered at no charge. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, latex tubular, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Rigid platforms with leg straps are standard. OPTIONS: Side guards, spoke guards, positioning belts, lifting straps, tray, and others. CAPACITY: 250 pounds. WEIGHT: 23 pounds. WARRANTY: Lifetime frame and quick-release axle warranty.

  77. QUICKIE RHYTHM M5 POWER CHAIR Picture of QUICKIE RHYTHM M5 POWER CHAIR

    The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 inches (Perfect Fit seat). The Traditional rehab and Perfect Fit seats are each available with power tilt and/or power lift. Power recline is available with Perfect Fit seat only. The floor- to-seat height is 17 to 20 inches for the non-tilt chair, 17.75 to 20.75 inches for the tilt or lift chair, or 19.25 to 21.75 inches for the tilt and lift chair. ARMRESTS: Full- or desk-length flip-up armrests. Height adjustable armrests are optional (included with power recline). CASTERS: 6-inch solid casters. WHEELS: 14 x 3 inch knobby or V groove pneumatic tires. Solid tires are optional. FOOTRESTS: Swing-away footrest or composite foot plate with heel loop. Options include elevating legrests, angle-adjustable footplate, extended, toe loops, extension tubes, and solid one- or two-piece locking footrests. POWER: Uses two 12-volt batteries, group 24 or 22 NF. CAPACITY: 300 pounds. WEIGHT: 155 pounds without batteries. WARRANTY: The frame is guaranteed for the lifetime of the original purchaser. The chair includes a 5-year warranty on the Perfect Fit seat frame, interface bracket, and structural components; a 2-year warranty on Sunrise made parts and components against defects in materials and workmanship.

  78. QUICKIE SHARK HANDCYCLE Picture of QUICKIE SHARK HANDCYCLE

    The Quickie Shark Handcycle is a hand cycle designed for use by individuals with lower extremity disabilities or spinal cord injury. The cycle’s features include a one piece frame, vertical or horizontal handles, adjustable seat positioning and back angle, a foldable back, and short or long legrests. The arm-crank can be adjusted to the rider's specific seat-angle position, arm length, and riding technique. The cycle is available with up to 27 speed settings. DIMENSIONS (HxL): 8.6 x 40.2 inches. Seat is 14.8, 16.4, or 17.9 inches wide. Wheels are 20 or 26 inches in diameter. CAPACITY: 265 pounds. WEIGHT: 33 pounds.

  79. QUICKIE T45

    The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 20-inch depths on the long frame. A fixed/adjustable, 24-inch high back is standard. A reclining back is optional. The backrest includes stroller handles and removable stroller handle extensions are available. Solid seats and backs are standard. The seat unit features a standard tilt mechanism with a 90-pound assist. A heavy-duty tilt mechanism with a 135-pound assist is also offered. ARMRESTS: Dual-post armrests with standard or full-length pads are standard. Dual-post, height adjustable armrests with standard or full-length pads or adjustable locking flip-up armrests are available. BRAKES: Wheel locks are standard. CASTERS: Pneumatic or polyurethane 8-inch casters are standard. 8 x 2 inch pnematic casters or 8 x 2 inch pneumatic casters with airless inserts are extra cost options. WHEELS: 16-inch mag wheels with pneumatic tires are standard and 20-inch mag wheels are available at no charge. Pneumatic tires with airless inserts and full-profile polyurethane tires are also available. FOOTRESTS: Swing-away 60- or 70-degree footrests with composite footplates and heel loops are standard. Heavy-duty 70- or 80-degree lift-off, elevating, or articulating footrests are optional. Angle-adjustable or extended footrests and toe loops are also optional. OPTIONS: Positioning belts, vent tray and battery box, impact guards, touch-up paint, tray, and others. CAPACITY: 350 pounds. WARRANTY: Lifetime frame guarantee.

  80. QUICKIE TI ALL COURT Picture of QUICKIE TI ALL COURT

    The Quickie Ti All Court is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with a center-of-gravity adjustment range of 3.5 inches and a lightweight single-wing bumper. This chair also features a fifth wheel anti-tip brace. An optional stand-up bumper is available. SEAT (LxW): 10 to 20 x 12 to 20 inches. The seat is outfitted with a ratchet-style positioning belt featuring two sets of locking ratchet-clamps. An optional half-solid seat pan is available. CASTERS: Extra-hard 3 inch micro casters. WHEELS: 24- or 26-inch spoked wheels or Spinergy sports wheels, with camber options of 16 or 20 degrees. FOOTRESTS: Single-piece footplate with optional toe clips. CAPACITY: 250 pounds. WEIGHT: 21.5 pounds.

  81. QUICKIE TI TITANIUM Picture of QUICKIE TI TITANIUM

    The Quickie Ti Titanium is an ultra-lightweight rigid chair designed for use by active individuals with lower extremity disabilities and mobility disabilities. FRAME: Titanium alloy with over 4,000 different frame configurations. Each frame can be customized in areas of frame angle (70 degrees, 80 degrees, 85 degrees) and frame inset (1 inch, 2 inches, 3 inches). A fold-down back, an L- shaped frame, and an extremely low frame weight facilitate vehicle transfers. Fold down push handles are standard. The overall width is 19 inches to 31 inches. SEATS: Each frame can be customized in areas of front seat height (16 inches to 20 inches in 0.5-inch increments), rear seat height (14 inches to 19 inches in 0.5-inch increments), seat width (13 inches to 18 inches), and seat depth (14 inches to 19 inches). CUSHION: Two-inch cushion available. ARMRESTS: Padded swing-away armrest available. BRAKES: High-mount scissor, high-mount push, or high-mount pull wheel locks are available. CASTERS: Caster fork threads directly into the frame. Pivot caster-adjuster allows the forks to pivot 16 degrees in two-degree increments. WHEELS: 24- or 26-inch spoke wheel; 24-inch tennis wheel, basketball wheel, heat treated tennis wheel, heat treated basketball wheel, and spinergy wheels with yellow or black spokes. The rear axle features a four-inch of center of gravity adjustment in 0.5-inch increments. The axle plate features a three- inch vertical adjustment in 0.5-inch increments. FOOTRESTS: Titanium tubular footrest. CAPACITY: 250 pounds. WEIGHT: Approximately 15 to 20 pounds. WARRANTY: Sunrise guarantees the frame for the lifetime of the original purchaser and includes a 2 year warranty on Sunrise made parts and components against defects in materials and workmanship.

  82. QUICKIE TRIUMPH Picture of QUICKIE TRIUMPH

    The Quickie Triumph is a lighweight sports wheelchair designed for daily or sports use by adults. FRAME: Features a choice of a 75- or 85-degree front frame. The squeeze frame is available in 14 to 20 inch widths. Short and tall configurations are available at an extra charge. The frame is offered in a choice of 11 standard and 6 optional colors with black chair parts. Anti-tip tubes are optional. SEAT: The seat is available in depths ranging from 14 to 18 inches in one-inch increments. See widths are .5 inch narrower than the frame width. A folding, height-adjustable backrest is standard. Optional push handles are available. CUSHION: A 2-inch seat cushion is available. UPHOLSTERY: Sling seat and back upholstery is standard. Adjustable upholstery is available. ARMRESTS: Armrests are optional. Padded swing-away armrests are available. BRAKES: High-scissor wheel locks are standard, and high-push or high-pull wheel locks are offered at no charge. Extension handles and grade aids are available. CASTERS: 5-inch low profile polyurethane casters are standard; 3-inch micros are available at no charge. WHEELS: 24-inch spoke or mag wheels are available at no charge. 26-inch wheels are extra-cost options. Tennis or basketball or heat-treated basketball or tennis Quickie Performance wheels are available. Pneumatic tires are standard and turbo tread and high-pressure clincher tires are offered at no charge. Pneumatic tires with airless inserts, full- or low-profile polyurethane tires, latex tubular, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Adjustable rigid platforms with leg straps are standard. OPTIONS: Side guards, spoke guards, positioning belts, lifting straps, tray, and others. CAPACITY: 250 pounds. WEIGHT: 19.5 pounds. WARRANTY: Lifetime frame warranty.

  83. QUICKIE TS

    The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 20-inch depths on the long frame. Seat widths are .5 inch narrower than the frame. The seat height depends upon wheel and caster sizes and seat position on the frame. A solid seat or seat pan is optional. A padded back is standard; 18- or 20-inch high backs are optional. The backrest includes a chooice of standard, medium, or tall stroller handles and swing-away adjustable stroller handles and removable extensions are available. Solid seats and backs are standard. The seat unit features a 45-degree tilt unit controlled by dual release levers and a 0- to 18-degree seat to back angle. A hinged back-to-seat bracket is available. UPHOLSTERY: Black foam-padded upholstery is standard. ARMRESTS: Dual-post armrests with full- or desk-length pads are standard. Dual-post, height adjustable armrests with standard or full-length pads; adjustable-locking flip-up; or height-adjustable armrests with standard or full-length pads are available. BRAKES: High-push wheel locks are standard and high-pull wheel locks are available at no charge. Extension handles, foot lock brakes, and grade aids are also available. CASTERS: Low-profile polyurethane 5-inch casters are standard. Pneumatic 8-inch, pneumatic 6-inch, and 6- or 8-inch polyurethane, are offered at no extra charge. 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 24 inches in diameter; 16-, 20-, and 22-inch wheels are offered at no charge. Pneumatic tires are standard; full- or low-profile polyurethane tires are offered at no extra charge. Pneumatic tires with airless inserts, high-pressure clincher, and Kevlar tires are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Swing-away 60-, 70- or 90-degree or 70-degree V footrests with composite footplates and heel loops are standard. Adjustable, flip-up footplates are offered at no charge. Angle-adjustable or extended footrests are optional. A 90-degree footboard or platform flip-up footrest, elevating legrests, and articulating legrests are also available. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 250 pounds. WEIGHT: 49 pounds. WARRANTY: Lifetime frame guarantee.

  84. QUICKIE Z-500

    The Quickie Z-500 is a pediatric powered tilt-in-space wheelchair designed for use by children who need to change position without transferring from the wheelchair. A non-tilt option is also available. FRAME: Frame widths range from 12 to 16 inches in 1-inch increments. The rigid frame is available in 11 standard colors and 3 custom colors and includes a growth kit. CONTROLS: A programmable controller and remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and a swing-away, retractable mounting is available. The Smart Pad programmer is optional, and specialty controls are available. The chair is lso available without electronics. RWD: Rear-wheel direct drive. SEAT: A tilt-in-space seat frame is included with this chair. The seat is available in a standard choice of 12- to 16-inch widths, in 1-inch increments. Seat depths range from 10 to 15 inches, in 1-inch increments. The front seat height is 20 inches and the rear seat height is 19.5 inches. The backrest comes in low, 11 to 12 inches; medium, 13 to 14 inches; and tall, 15 to 16 inches high.. A solid seat and back, stroller handles, and custom seat depths are optional.. UPHOLSTERY: Black foam-padded upholstery is standard. Blue, red, or hot pink color striping is available at an extra charge. ARMRESTS: Height-adjustable adult, kids, or pediatric armrests with desk- or full-length pads are included. Adjustable-locking flip-up armrests are available. BRAKES: Push-to-lock wheel locks are standard and pull-to-lock wheel locks are available at no charge. Extension handles are also available. CASTERS: Pneumatic 8-inch casters are standard. Airless inserts are extra cost options. WHEELS: 12-inch mag wheels with pneumatic tires are standard. Pneumatic tires with airless inserts are also available. FOOTRESTS: Swing-away 60-, 70- or 90-degree footrests with composite footplates and heel loops are standard. A 90-degree footboard with leg strap is offered at no charge. Angle-adjustable, adjustable flip-up, platform flip-up, or extended footrests are optional. Elevating legrests and articulating legrests are also available. OPTIONS: Positioning belts, backpack, seat pouch, touch-up paint, tray, and others. POWER: Uses two gel or lead acid batteries (not included). A dual mode battery charger is included with the chair. SPEEDS: 5 miles per hour with a range of 25 miles. CAPACITY: 150 pounds. WEIGHT: 65 pounds without batteries. WARRANTY: The manufacturer offers a lifetime warranty on the frame and a one-year warranty on the joystick.

  85. QUIKFIT II CRUTCHES.

    Push button adjustable axillary crutches. Aluminum type. Push button handle and footpiece adjusts in 1 inch increments. Economy or standard rubber underarm pad, handgrip, and tip. Tall adult adjusts 52 to 60 inches. Adult adjusts 44 to 52 inches. Youth adjusts 37 to 45 inches. Quik Fitting Guide to assist measuring 30 degree elbow angle.

  86. RED DOT WALKER WITH 5 INCH SWIVEL WHEELS

    Folding adjustable wheeled walker for uneven surfaces. Aluminum frame. 2 front swivel casters with 5 inch rubber tires. Glide brakes. Dual fold mechanism. Soft foam handgrips. For adolescents or adults with heights 5 foot 4 inches to 6 foot 2 inches. Adjustable height from 34 to 38 inches. Base width 23 inches. Base depth open 16 inches. Base depth folded 3 3/4 inches. Inside grip width 16 1/4 inches. Weight 9 pounds.

  87. RED DOT WALKER WITH SEAT

    Adjustable folding walker with fold down seat. Contoured seat flips up and locks in place. seat width 17 1/2 inches, seat depth 10 inches, base width 23 inches, base depth open 16 inches, base depth folded 8 3/ 4 inches. Weight 8 3/4 pounds. Adult size: for user's height 5 feet 4 inches to 6 feet 2 inches, adjustable height 32 to 36 inches. Youth size: user's height 4 feet 7 inches to 5 feet 5 inches, adjustable height 29 to 33 inches. Usable with two rear rubber tips or glide brakes. CAPACITY: Maximum load capacity 200 pounds.

  88. REHAB RED DOT WIDE FRAME FOLDING WALKER (MODEL 7766)

    Folding walker. Adult size. Features Safe T Lok mechanism, operated by depressing tab with finger, side of hand or palm. Grasp handles and pull outward to unfold, depress tab and legs fold inward. Weight 6.4 pounds. Height adjustable 32 inches to 36 inches. Base width 25 1/4 inches. Base depth open 19 1/2 inches, Folded 3 3/4 inches. Inside handgrip width 19 inches. Wide stance for wheelchair transfer, over toilet safety assist. Walker usable in small space with one leg folded for additional maneuverability. Accessories: 7731 wheeled footpieces, 7708 wheeled extension footpiece set, 7712 extension footpiece set of 4.

  89. SAFE T FOLD WALKER (MODELS 7749 & 7750)

    Walker without wheels for youth. Folds easily for storage. Has no pinch folding braces. Contoured vinyl coated nonrotating hand grips. Child (model 7749) adjusts 24 to 28 inches, 4 pounds. Toddler (model 7750) adjusts 20 to 24 inches, weights 3 1/2 pounds. Accessories wheeled attachments for front legs with 3 inch wheels. Extensions for extra weight are available.

  90. SAFE T GRIP (MODELS 400, 500, & 550)

    Natural rubber crutch tip with metal disc at base of shaft cavity. For 3/4 to 7/8 inch shafts. Super base diameter 2 inches; height 3 inches. Large base diameter 1 3/4 inches; height 2 1/2 inches. Medium base diameter 1 1/2 inches; height 1 3/4 inches.

  91. SAFE-T-GRIP CRUTCH OR CANE TIP (MODEL 635)

    Rubber cane tip with metal disc at base of shaft cavity. For 1/2 to 5/8 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 3/8 to 1/2 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 1/4 to 3/8 inch shafts base diameter 7/8 inch; height 1 1/4 inch.

  92. SAFE-T-POLE (MODEL 98120)

    Floor to ceiling pole of heavy gauge steel, 1 1/2 inches in diameter. White. Mounts anywhere, no tools required for installation. Assist standing, sitting, climbing stairs or transferring. Adjustable height 7 feet 8 1/4 inches to 8 feet, 2 1/2 inches. Weight 14 pounds.

  93. SHADOW 3D & SHADOW 3D BASKETBALL

    The Shadow 3D and the Shadow 3D Basketball are three-wheel manual, lightweight rigid frame sport wheelchairs. FRAME: T-frame in regular and short configurations. Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 13 to 20 inches. A choice of a right- or left-mounted transfer handle is standard; A transfer handle on both sides is optional. Anti-tip tubes are optional. SEAT: The seat width is .5-inch narrower than the frame. The seat depth ranges from 12 to 18 inches in one-inch increments. The front seat height adjusts from 15 to 21 inches and the rear seat height adjusts from 14 to 17 inches. The standard backrest folds, has a 0- to 8-degree angle adjustment, and is height adjustable; a choice of two heights is available, each of which has a three-inch height adjustment range. A folding backrest with height adjustment and adjustable upholstery is optional. CUSHION: A choice of a 2- or 3-inch cushion is standard. UPHOLSTERY: Sling upholstery. ARMRESTS: No. CASTERS: One 3-inch micro caster. WHEELS: 24-inch spoke rear wheels with stainless steel axles, high-pressure clincher tires, aluminum handrims, and a fixed 12-degree camber are standard. Latex tubular tires, no flat tires, high-performance tennis or basketball wheels with turbo tires, titanium axles, and plastic or foam handrims are optional. FOOTRESTS: Composite footrests are standard; an aluminum footrest is optional on the Basketball model. OPTIONS: Presta valve adapter; seat pouch; tire pump; positioning belts; plastic side guards; spoke guards.

  94. SHADOW MACH 3 & SHADOW MACH 3 / DS

    The Shadow Mach 3 is a hand propelled racing cycle wheelchair for adults.. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes. SEAT: The seat is available in a choice of widths from 13 to 20 inches in one-inch increments. Custom seat frame modifications are available. A choice of a standard backrest which adjusts from 19 to 22 inches high or a short backrest which adjusts from 16 to 19 inches is offered. CUSHION: A choice of a 2-inch cushion or a 2-inch T-foam cushion is optional.. UPHOLSTERY: Sling upholstery. HANDLES: Vertical or small vertical handles are standard; horizontal or easy power quad handles are optional. CRANKS: Choice of standard or short crank. WHEELS: A choice of 24- or 26-inch high performance or 24-inch commuter tires is standard; no flats, 24-inch pneumatic tires, or a 26-inch off-road package are available. OPTIONS: Cycling computer with cadence; seat pouch; tire pump; front fender; backpack; friction tape; chest strap; others. SPEEDS: Both models are available with 12 or 36 speeds.

  95. SHADOW ONE & SHADOW DT

    The Shadow One and Shadow DT are manual sport wheelchairs. FRAME: Chrome-moly Shadow One 72-degree frame or Shadow One DT 72- or 85-degree frame. The frames are available in 11 standard colors, 6 optional colors, and custom or special effect finishes. The frames are offered for sports/daily use in standard, large standard, small standard and for sports use in steep, tall, and ultra-tall. Custom modifications are available. Anti-tips with wheels are optional. SEAT: Seat widths range from 12 to 20 inches. Seat depths range from 12 to 19 inches (available depths depend upon the frame style selected). A fold-down back is standard. The back comes in a choice of short (adjusts from 12 to 15 inches high), standard (adjusts from 15 to 18 inches high), and tall (adjusts from 16 to 20 inches high). Optional push handles are available with the standard and tall backrests. CUSHION: A 2-inch cushion is standard; a 3-inch cushion and a 2-inch T-foam cushion are available ARMRESTS: Optional. Adjustable padded armrests are available. A choice of high or low side guards is standard. BRAKES: Low-mount scissor wheel locks are standard; options are high-mount push and high-mount with grade aids. CASTERS: Low-profile 5-inch polyurethane casters are standard; 3 inch micros and 5 x 2 inch soft roll casters are available. WHEELS: Quick-release axles and a choice of 20-, 22-, 24- or 26-inch wheels with pneumatic tires and aluminum handrims are standard; high-pressure clincher tires are offered at no charge. Options include 24- or 26-inch tennis or basketball wheels with turbo tires, latex tubular tires, and no flat tires. Rim-mounted plastic or foam handrims, quad projections, or spoke-mounted anodized, plastic, or foam go rings are also available. FOOTRESTS: A one-piece, rigid footrest is standard on the Shadow One and a platform footrest is standard on the Shadow DT. An adaptive style footrest is optional on the Shadow One and an adaptive platform is optional on the Shadow DT. OPTIONS: Backpack; catchall; crutch holder; cloth impact guards; pad for backrest crossbar; presta valve adapter; seat pouch; tire pump; positioning belt. WEIGHT: 19 to 20 pounds with footrest.

  96. SHADOW QR

    The Shadow QR is a manual, lightweight rigid frame racing wheelchair. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 12 to 20 inches. Custom modifications are also available. U-shaped anti-tip tubes are standard. SEAT: The seat rails on this chair extend 3.5 inches beyond the front of the upholstery. The seat depth ranges from 12 to 18 inches in one-inch increments. The rear seat height ranges from 13 to 18 inches in .5-inch increments and the front seat height ranges from 13 to 20 inches in .5-inch increments. The standard backrest folds, has a 0- to 8-degree angle adjustment, and is height adjustable; a choice of three heights is available, each of which has a three-inch height adjustment range. A folding backrest with height adjustment and adjustable upholstery is optional. CUSHION: A 2-inch cushion is standard; a three-inch cushion and a 2-inch T-foam cushion are optional. UPHOLSTERY: Sling upholstery. ARMRESTS: No. BRAKES: A choice of high- or low-mount scissor wheel locks is standard; low-mount push wheel locks are available at an extra charge. CASTERS: 3-inch micro casters. WHEELS: Quick-release 24- or 26-inch rear wheels with pneumatic tires, aluminum handrims, and a choice of 9-, 12-, or 15-degree camber is standard. High-pressure clincher tires are available at no extra charge. Latex tubular tires, no flat tires, high-performance tennis or basketball wheels with turbo tires, and plastic or foam handrims are optional. FOOTRESTS: Platform footrest. OPTIONS: Presta valve adapter; seat pouch; tire pump; positioning belts; chest strap; and others. WEIGHT: 13 to 15 pounds.

  97. SHADOW RACER

    The Shadow Racer is a manual, rigid frame, racing wheelchair. FRAME: T-tube chrome moly or T-tube aluminum with 3 or 4 wheel design, custom built. Frame lengths of 33, 35, 37, 39, 41, and 43 inches are available. SEAT: Seat width 11 to 17 inches. Seat depth and back height fit to user. WHEELS: Quick-release 20, 24, and 26 inch rear wheels with tubular tires with 12 degrees camber. 16, 18 and 20 inch front wheels with tubular tires. BRAKES: Handbrake standard. OPTIONS: Cateye Vectra computer is standard; 2 optional computers; friction tape, handbollsklister; helmet; instructional video; presta valve adapter; rim cement for tubular tires; seat pouch; tire pump, uni-disc wheel cover; water bottle cage; wheel travel bag. COLOR: 12 standard colors are available; 3 optional colors are available for an additional $105; 3 custom splatter patterns are available for an additional $340; special effects/custom paints jobs are available for an additional $420; custom painted rims are available for $175. WEIGHT: 13 to 15 pounds. Computer designed and wind tunnel tested. .

  98. SIDE STEPPER (MODELS 7770 & 7771)

    Four footed walking aid with a frame or pyramid design. Bilevel handgrips. Push button adjustable height. Folds to 2 3/4 inches flat. Rubber safety tips weight 3 1/2 pounds. Adult height adjusts 32 to 36 inches. Youth height adjusts 28 to 32 inches.

  99. STRIDER MIDDLER (MODEL 7781)

    Adjustable walker for patients 3 feet 4 inches to 5 feet 10 inches. Pushbutton height adjustment. Adjustable height 22 to 37 inches. Adjustable handles. 5 inch front casters. Options: platform attachment, horizontal or vertical handles. Folds for storage. No tools required for adjustments. Blue. Weight 6 1/2 pounds.

  100. STRIDER REGULAR (MODEL 7780)

    Folding adjustable wheeled walker for adults or children. For patients 4 feet 8 inches to 6 feet 4 inches. Pushbutton height adjustment. Adjustable height 27 to 40 inches. Adjustable handles. 5 inch front casters. Options: platform attachment, horizontal or vertical handles, carrying basket, carrying pouch. Folds for storage. No tools required for adjustments. Black. Weight 8 pounds.

  101. STRIDER TYKE (MODEL 7782)

    Child walker for patients 2 feet 2 inches to 3 feet 6 inches. Pushbutton height adjustment. Adjustable height 11 1/2 to 21 inches. Adjustable handles. 5 inch front casters. Options: platform attachment, horizontal or vertical handles, carrying basket, carrying pouch. Folds for storage. No tools required for adjustments. Red. Weight 4 1/2 pounds.

  102. SURGILIFT

    Stretcher with lifting mechanism. Special sheets with six attached straps are placed under person to be lifted. Straps are buckled to frame of Surgilift and frame is lifted to desired height. U shaped base, 4 casters with locks.

  103. TOILET SAFETY RAIL Picture of TOILET SAFETY RAIL

    The Toilet Safety Rail is an adjustable safety frame with a bracket designed to provide assistance in getting on and off the toilet. It has an anodized aluminum frame, Cant-I-Levered arms, and closed cell foam armrests to provide a sure grip with comfort. The adjustable height armrest is 26 to 31 inches to the floor. The adjustable width between armrests is 18 to 24 inches. WEIGHT: 10 pounds.

  104. TRANSFER BENCH (MODELS 98013 & 98014)

    Transfer bench with water resistant vinyl covered foam cushions. Suction cups secure to tub floor. Backrest and armrest. Backrest can be mounted on either side for right or left access. Lightweight, rust resistant, anodized aluminum frame. Pushbutton height adjustment. Available with standard or commode seat. Commode seat can be positioned in any direction for easy access to perineal area. Adjustable seat height 16 1/2 to 22 inches. Seat depth 16 1/2 inches. Overall width 29 inches. Overall height 34 to 39 inches. Weight 16 pounds.

  105. TRANSFER BENCHES (MODELS K10366 & K11119)

    Transfer Benches, Models K10366 & K11119, are bath seats designed for persons with physical disabilities using wheelchairs. The unique design allows individuals to slide from a wheelchair into the tub. The backrest can be flipped for either right or left setup and a push-button height adjustment and rubber non-slip feet provide additional stability. Seats come in either padded or solid polyethylene versions. DIMENSIONS: Seat height adjusts from 17.5 to 22.5 inches. Seat measures 16.5 x 27 inches. CAPACITY: 275 pounds.

  106. TUB GRAB BAR (MODEL 98005)

    The Tub Grab Bar, model 98005, is a grab bar for the bathtub designed to attach to the side of the bathtub to assist individuals getting into and out of the tub. It is made of nylon coated steel and has multi-level hand holds. DIMENSIONS: Clamp adjustment 3 to 7 inches; height above the tub wall is 15 inches; overall width is 8 to 11.25 inches. WEIGHT: 6.5 pounds. COLOR: White, almond or blue.

  107. TUB GRAB BAR (MODEL K10365)

    The Tub Grab Bar, Model K10365, is a safety device for entering or exiting a bathtub designed for persons with physical disabilities or balance problems. The vertical, white plastic curved grab bar attaches to the side of the bathtub and can be gripped at a high-level when entering the tub and at a lower level grab bar when exiting. The finish is textured to prevent slippage and rubber lined pads at the bar's base prevent scratches to the tub. Installation requires no tools and the height can easily be adjusted with the turn of a knob. DIMENSIONS: 15-inches high. 5-inches maximum width.

  108. TUB TRANSFER BENCH (MODELS 98014 & 98013)

    Transfer tub bench, anodized aluminum frame with vinyl covered foam padded seat and back cushions. Backrest has open loop in frame to allow variety of arm positions for transfer, side transfer, section extends over side of tub for easy transfer. Two legs in tub have rubber tips, leg extensions available. Two clamps with large rubber discs securely attach bench to tub wall. Seat height 15 to 18 1/2 inches. Clamp adjusts 2 to 6 1/2 inches. Seat depth 18 inches. Fits tubs from 11 to 14 1/2 inches deep, leg extensions for tubs 15 to 18 1/2 inches deep. Overall height 31 to 34 1/2 inches, overall length 29 1/4 inches, overall width 21 inches. Weight 16 1/2 pounds.

  109. TYKE WHEELED WALKER (MODEL 7751) & LITTLE TYKE (MODEL 7752)

    Walker for child just beginning to walk. Has welded front footpieces and rubber tipped rear foot pieces. Has both standard horizontal handles as well as vertical handles to fit stability and grasping needs of child. Vertical hand position also provides opportunity for posture correction. Nonfolding for increase strength. Noise free silencers for all footpieces. Lightweight aluminum construction. Dimensions: model 7751, 3.7 pounds, 16 to 21 inches in height, 16 inch base width, 19.25 inches base depth, 12.5 inches inside grip width, 6 pounds shipping weight. Model 7752, 2.12 pounds, 13 to 15 inches in height, 16 inch base width, 14.5 base depth, 12.5 inch grip width, 5 pounds shipping weight.

  110. UNIPOISE CANE BRITE (MODELS 5355, 5357, 5356, & 5358)

    Push button adjustable height aluminum cane with offset shaft. Contour molded handgrip. Rubber safety tip. Locking silencer for rattle free use. Models 5355, 5356 height adjusts 31 to 40 inches. Models 5357, 5358 height adjusts 24 to 33 inches.

  111. WHEELCHAIR TRAYS AND MODIFICATIONS

    Lapboards. Available in 1/2 inch 9 ply birch plywood, or 3/8 or 1/4 inch Tuffak (polycarbonate material), with regular or heavy duty cottonwood ribs. Range of widths, 20 7/8 to 25 3/4 inches; depths 17 7/ 8 to 25 3/4 inches; Cam adjustment range 13 3/4 - 18 1/4 inches to 18 1/ 4 - 23 1/4 inches. Small fits STC 803/900 Models and Tiny Tot and Growing wheelchairs; Medium fits STC 804/806/900 Models and Growing, Narrow Adult and Adult wheelchairs; Large fits STC 804/806/900 Models and Adult wheelchairs. Includes one set of cam locking hardware and replaceable wood ribs. Wheelchair tray modifications include extra set of slots, vertical slots, seat belt adaptation, padded stomach cut out, wrist straps, velcro straps, special size ribs, cut out for power drive units, special stomach cut out, change of standard slot placement.

  112. WOODEN SAFE-T-CANES (MODELS 5390 & 5400)

    Wooden straight canes. Domestic, american, T-handle, imported standard, imported slimline, special brass knob and special brass knob sectional models available.

  113. YOUTH SAFE T WALKER, SUPER RIGID (MODEL 7721)

    Aluminum extra braced extra strength childs walker. Has 4 rubber tips. Height adjusts 28 inches to 32 inches.

  114. ZIPPIE

    The Zippie is a child's lightweight manual wheelchair designed for use by children with mobility disabilities. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional.A growth kit is included to expand the fame to meet the user's needs. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Three back heights are offered: low, 11 to 12 inches; medium, 13 to 14 inches; and tall, 15 to 16 inches. The standard backrest includes a choice of standard, medium, or tall stroller handles and swing-away adjustable stroller handles are available. Solid seats and backs are also available. Custom seating systems are available. UPHOLSTERY: Foam-padded black upholstery is standard. Optional blue, red, or hot pink color striping is available. ARMRESTS: Flip-up armrests are standard. Adjustable-locking flip-up and height-adjustable armrests with standard or full-length pads are optional. BRAKES: High-push wheel locks are standard; high-pull wheel locks are available at no charge. Foot wheel locks are available at no charge with 12- or 16-inch wheels. Brake handle extensions and grade aids are optional. CASTERS: 5-inch low profile polyurethane casters are standard. Pneumatic 6-inch or 6-inch semi-pneumatic polyurethane are offered at no extra charge. Pneumatic 8-inch or 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates are standard and mag wheels are offered at no extra charge. Standard wheels are 22 inches in diameter; 20- and 24-inch wheels are offered at no charge. 12- or 16-inch wheels without handrims are extra-cost options. Pneumatic tires are standard and full- or low-profile polyurethane tires are available at no extra charge. Pneumatic tires with airless inserts, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Swing-away 60-, 70- or 90-degree adjustable flip-up footrests with composite footplates and heel loops are standard. Other footrest configurations are available as extra-cost options. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 150 pounds. WEIGHT: 24 pounds without footrests.

  115. ZIPPIE 2

    The Zippie 2 is a lightweight manual child's wheelchair. FRAME: Folding back with collapsible crossbrace. The frame is available in a choice of 12- to 16-inch widths in 1-inch increments, in regular and kids lengths with multiple growth adjustments. A free growth kit is available with this chair. The frame is available in a choice of 11 standard colors and 3 custom colors. Rear anti-tip tubes are standard; front anti-tips are optional. SEAT: Accepts a wide variety of seating inserts for customized seat height and positioning. The seat widths and depths range from 12 to 16 inches in 1-inch increments. Custom seat depths are available at an extra charge. The backrest is available in low, 11 to 12 inches high; medium, 13 to 14 inches high; and tall, 15 to 16 inches high. Fixed stroller handles in low, medium, or high are standard on the backrest. Swing-away adjustable stroller handles are available. A solid seat and back are available at an extra charge. UPHOLSTERY: Black upholstery is standard. Blue, red, or hot pink color striping is optional. ARMRESTS: Flip-up armrests are standard. Adjustable locking flip-up or adult or child's height- adjustable armrests with full- or desk-length pads are optional. BRAKES: High-push or high-pull wheel locks are standard. Extension handles and grade aids are available. CASTERS: 5-inch low-profile polyurethane casters are standard; 6- or 8-inch polyurethane or pneumatic casters are offered at no extra charge. 8 inch x 2 inch pneumatic casters or pneumatic casters with airless inserts are extra-cost options. WHEELS: 20-, 22-, or 24-inch spoked or mag wheels with pneumatic or full- or low-profile polyurethane tires. Also available at extra cost are 12- or 16-inch wheels without handrims and pneumatic tires with airless inserts, high pressure clinchers, or kevlar or kevlar with airless insert tires. Aluminum handrims are standard. Plastic-coated handrims, grade aids, and projections are available. FOOTRESTS: 60-, 70-, or 90-degree swing-away legrests with composite, adjustable flip-up footplates or a 90-degree footboard are standard. Articulating adult or child's legrests, elevating legrests, angle-adjustable or extended footplates, and platform flip-up footrests are optional. OPTIONS: Backpack, seat pouch, side guards, spoke guards, positioning belts, touch-up paint, and others. CAPACITY: 150 pounds. WEIGHT: 25 pounds without footrests. GUARANTEE: Lifetime frame warranty.

  116. ZIPPIE GS

    The Zippie GS is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed to grow with the child without the need for new parts. The Zippie GS provides a wide range of width, seat depth and other key positioning adjustments. Reversible wheel configuration, a universal axle plate and unique side frames add additional flexibility and stability. FRAME: Overall width is 19 to 27 inches. The frame is offered in 14 standard and three custom colors. The chair is available with a Transit Option for use in buses or vans. SEAT (LxW): 10 to 20 x 10 to 18 inches. Seat to floor height is 14 to 20.25 inches. The chair has dual seat rails that allow a variety of seating systems, including most solid or custom seats and backs, and drop seats. A growing solid seat pan is also available. CASTERS: Front casters are available in 3, 5, 5 x 1.5, 5 x 2., 6, 6 x 1.5, 8, 8 x 1.5, or 8 x 2 inches. WHEELS: Rear wheels are available in 12, 16, 18, 20, 22, or 24 inches. An adjustable universal axle plate allows the chair to be set up in either standard or reverse configuration, and allows half-inch vertical and horizontal adjustments to provide increased wheel access. One-arm drive is available as an option. CAPACITY: 150 pounds. WEIGHT: 25 pounds without footrests. DELIVERY TIME: Ground, next day, 2-day, or 3-day delivery.

  117. ZIPPIE HEAD AND NECK TELESCOPING SUPPORT SYSTEM

    Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back.

  118. ZIPPIE HIP PADS & FULL SIDE PADS

    Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only.

  119. ZIPPIE TRUNK SUPPORT PAD AND BRACKET

    Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black only.

  120. ZIPPIE TS

    The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel and caster options selected. Three back heights are offered: low, 11 to 12 inches; medium, 13 to 14 inches; and tall, 15 to 16 inches. The standard backrest includes a choice of standard, medium, or tall stroller handles and swing-away adjustable stroller handles are available. Solid seats and backs are also available. Custom seating systems are available. TILT IN SPACE: Active 45-degree tilt. The adjustable frame allows the tilt to be adjusted 5 degrees forward or rearward. A choice of single or dual mechanical tilt locks is available. UPHOLSTERY: Foam-padded black upholstery is standard. Optional blue, red, or hot pink color striping is available. ARMRESTS: Flip-up armrests are standard. Adjustable-locking flip-up and height-adjustable armrests with standard or full-length pads are optional. BRAKES: High-push wheel locks are standard; high-pull wheel locks are available at no charge. Foot wheel locks are available at no charge with 12- or 16-inch wheels. Brake handle extensions and grade aids are optional. CASTERS: 5-inch low profile polyurethane casters are standard. Pneumatic 6-inch or 6-inch semi-pneumatic polyurethane are offered at no extra charge. Pneumatic 8-inch or 8 inch x 2 inch pnematic casters or pneumatic casters with airless inserts are extra cost options. WHEELS: Spoke wheels with adjustable axle plates and quick-release axles are standard and mag wheels are offered at no extra charge. Quad release axle nuts are optional. Standard wheels are 22 inches in diameter; 20- and 24-inch wheels are offered at no charge. 12- or 16-inch wheels without handrims are extra-cost options. Pneumatic tires are standard and full- or low-profile polyurethane tires are available at no extra charge. Pneumatic tires with airless inserts, high-pressure clincher, and Kevlar or Kevlar tires with airless inserts are also available. Aluminum handrims are standard. Plastic-coated handrims and handrim projections are available as options. FOOTRESTS: Swing-away 60-, 70- or 90-degree adjustable flip-up footrests with composite footplates and heel loops are standard. Other footrest configurations are available as extra-cost options. OPTIONS: Spoke guards, positioning belts, side guards, touch-up paint, tray, and others. CAPACITY: 150 pounds. WEIGHT: 29 pounds without footrests.

See Sunrise Medical products that are no longer available.

  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.