Jobri LLC

520 North Division Street
Konawa, Oklahoma 74849
United States
Telephone: 800-432-2225 or 580-925-3500.
Fax: 580-925-3501.
Web: http://www.jobri.com.
Email: support@jobri.com.

Products manufactured by Jobri LLC (listed alphabetically)

1. ACCU-BACK BACK SUPPORTS

   The Accu-Back Back Supports are a portable back support cushions made of fire-retardant fabric and temper foam. Twelve models are available: an executive model has two vertical lumbar pads and shoulder rest, deluxe executive includes a seat pad in single unit, economy pillow back has back rest with single horizontal lumbar support, deluxe includes shoulder rest. Also 3 models with no additional parts needed. COLOR: Variety.

2. BETTERPOSTURE KNEELING CHAIR - STANDARD (MODEL F1420)

   The BetterPosture Kneeling Chair - Standard, model F1420, is a height-adjustable posture chair designed to promote good posture and strengthen the lower back muscles. The user sits in a kneeling posture with the knees resting on a knee pad. This manually height adjustable kneeling chair has a steel frame with nylon casters. The seat and knee pad are made of supportive polyurethane foam covered with durable fabric. DIMENSIONS (HxLxW): 21 to 28.5 x 29 x 18 inches. The seat is 12.5 x 17.5 inches. The knee cushion is 6.5 x 11 inches. CAPACITY: 280 pounds. WEIGHT: 17 pounds. COLOR: Black. WARRANTY: Five years.

3. COOLDOCK NOTEBOOK STAND (MODEL F7000/BK)

   The COOLdock Notebook Stand, model F7000/BK, is a notebook/laptop computer support designed to help prevent poor posture that can lead to back, neck, and wrist strain. This stand enables the user to adjust the height and angle of the notebook screen for optimal viewing and ergonomic comfort. The unit supports wide screen notebooks. A built-in four-port USB 2.0 hub provides connections for computer accessories. Two built-in fans cool the underside of the notebook which is important in extending the life of a computer. DIMENSIONS (HxLxW): 2 x 11 x 13 inches.

4. JOBRI MOBILE DESK CADDY (MODEL F7300-XX)

   The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31 inches. COLOR: Dark walnut, walnut, or maple finish.

5. MOR-LOC ABDOMINAL BINDER, UNIVERSAL ABDOMINAL BINDER, & UNIVERSAL THREE PANEL BINDER & COMBO BELT (MODELS 20-108, 20-120, 20-203, 20-215, 20-119)

   The Mor-Loc Abdominal Binders are designed for post operative treatment, and may provide some back support. The binders are available in several different models. The Abdominal Binder, models 20-108 and 20-120, are all elastic and have eiffel tower darts and flexible stays to prevent rolling. They are designed with a hook and loop closure. The Universal Abdominal Binder, model 20-203, is made with elastic and foam/nylon laminate and hook fastens the nylon for a universal fit. The Universal Three Panel Binder, model 20-215 is designed with three horizontal panel elastic with a foam/nylon laminate. It hook fastens to foam to fit almost anyone. The Combo Belt, model 20-119, is all elastic with flexible metal stays and hook and loop closure. It works as a rib splint, abdominal binder, and/or sacroiliac support. SIZES: Universal models are one size fits all. Others come in small, medium, large and extra-large. DIMENSIONS: Abdominal Binders are ten inches wide. Three Panel Biner is nine inches wide. Combo Belt is eight inches wide.

6. MOR-LOC ANKLE-LOC (MODEL 50-107)

   The Mor-Loc Ankle Loc is an ankle support designed to offer support for individuals with sprained or weak ankles. The wraps are made of Elastic with hook and loop closures. The design is a figure-8 with an open heel. DIMENSIONS: 3 inches wide. Lengths of 17, 18, 19 and 20 inches.

7. MOR-LOC ARM SLING

   The Mor-Loc Arm Sling is designed to stabilize and support the arm and releive strain from the shoulder for individuals with an upper limb injury. It features a single, washable webbing strap with two loops for the elbow and wrist. It is lightweight and washable. COLOR: Snow white.

8. MOR-LOC CERVICAL COLLAR (MODELS 40-115, 41-115, 40-515, 41-515, 40-210, 40-215, 40-220, 40-225, 41-210, 41-215, 41-220, 41-225, 40-148, 42-148, 40-147, 40-149, 41-149, 42-149, 43-149, 40-314 & 40-318)

   The Mor-Loc Cervical Collar is designed to give support to the neck area for indivisuals who have a neck injury. Models 40-115, 41-115, 40-210 and 40-220 are made of contoured, medium density foam and are covered twice with bleach stockinette. An economy version, models 40-515, 41-515, 41-210, 41-215, 41-220, 41-225, is available, which is covered with only one bleach stockinette. Extra cover is provided with each of the previously mentioned collars. A Tapered End Collar, models 40-148, 41-148, and 42-148 are double covered with bleached stockinette and the ends are tapered for a more comfortable fit. These models have a hook and loop closure. The Universal Straight Collar, model 40-147, uses unbleached stockinette, as a hook and loop closure and is not contoured. The Universal Contoured Collar, models 40-149, 41-149, 42-149 and 43-149, has a neck contour and hook and loop closure with a loop that is extra long for better fit. The Adjustable plastic Cervical Collar, models 40-314 and 40-318, offers stabilization and is automatically adjusted using hinge and bias slot arrangement. It comes with hook and loop closure and is available with or without a chin rest. OPTIONS: Collar covers and extension tabs are available. DIMENSIONS: A large variety of widths and lengths is available.

9. MOR-LOC CHARLIE HORSE THIGH LOC (MODEL 50-200)

   The Mor-Loc Charlie Horse Thigh Loc is a thigh support designed to relieve pulled and strained muscles and to reduce soreness for individuals with a lower limb injury. It is made of elastic and has hook and loop closure. SIZES: Small to Extra Large. DIMENSIONS: 8 inches long.

10. MOR-LOC CLOTH ARM SLING (MODEL 50-125 & 52-125)

    The Mor-Loc Cloth Arm Sling, model 50-125, is designed to relieve strain from the arm and shoulder for individuals who have upper limb pain. It is made of grey twill. The product has a slide buckle fastener and an opening at one end. The device is made to fit the right, and/or the left arm. It is also available with a velcro closure.

11. MOR-LOC COCK UP SPLINT & WRIST SUPPORT (MODELS 50-111 & 50-129)

    The Mor-Loc Wrist Splint is designed to help immobilize the hand and wrist for individuals with upper limb injuries. Both models feature an all elastic construction with an open thumb and hook and loop closure. The Cock Up model has an aluminum spoon support for resistance of forward flexion. The wrist support model has flexible stays to help support hand and wrist. Available for the right or left hands. SIZE: Small to Extra Large. DIMENSIONS: 7 inches long. Fits 6 to 14 inche wrist and forearm.

12. MOR-LOC CRISS CROSS SUPPORT & DELUXE CRISS CROSS SUPPORT (MODELS 20-127, 20-128, 20-130, 20-333, 21-333, 22-333, 20-335)

    The Mor-Loc Criss-Cross Support is a lower back support for individuals who experience lower back strain. Models 20-127, 20-128 and 20-130, feature an all elastic criss-cross construction with a hook and loop closure in front. The front is tapered for a more comfortable fit. The deluxe version, models 20-333 and 21-333, feature two adjustable elastic side pulls that attach to the sides of the belt and provides additional back support. It also has a hook and loop closure with four flexible stays in the back. Model 22-333 is model 20-333 with aluminum stays. Model 20-335 is diesgned with additional two side pulls that overlap in the front of the belt to add extra compression. Hoop and loop closure is used on both the belt and the front pulls to add ease of application and adjustability. SIZES: Available in small, medium, large and extra-large. DIMENSIONS: The standard support comes in 8, 9 or 10 inch widths; the Deluxe model is available in 10 or 12 inches wide.

13. MOR-LOC ECONOMY ARM SLING

    The Mor-Loc Economy Arm Sling designed to stabilize and support the arm while releive strain from the shoulder for individuals with an upper limb injury. It is made of a grey twill. It features open ends and a tie strap. SIZE: Small to Extra Large.

14. MOR-LOC ELBOW SUPPORT (MODEL 50-250)

    The Mor-Loc Elbow Support is designed to treat the elbow when painful muscles or ligaments need extra support for individuals with upper limb injuries. The pull-on support is knitted from one way stretch elastic. SIZE: Sizes are to fit closest elbow circumference. Available in small, medium, large and extra large. DIMENSIONS: Fit elbows measuring 7.5, 8, 9, 10 inches.

15. MOR-LOC ELBOW-LOC (MODELS 50-025 & 51-225)

    The Mor-Loc Elbow Loc is an elbow support designed to relieve tennis elbow for indivisuals with an upper limb injury. It consists of an elastic forearm band with hook and loop closure. It is available with or without a metal slide buckle. SIZE: One size fits all. DIMENSIONS: 2 or 4 inches wide. Fits 8 to 14 inch forearm. COLOR: Available in Red/White/Blue, or White.

16. MOR-LOC EXTRICATION COLLAR & DISPOSABLE EXTRICATION COLLAR (MODELS 40-154, 41-154, 42-154 & 40-165)

    The Mor-Loc Extrication Collar is a cervical collar designed to offer support and stability to the neck and head for individuals with a neck injury. It is made of extra-firm density foam and covered with a stockinette. It has hook and loop closures. Moodel 42-154 has trachea cutout. Model 40-165 is a disposable version of polyethylene foam, this material can be cut with scissors with paramedic scissors to adjust contour. SIZES: Available in small, medium, large and extra-large. Disposable available in small and large. DIMENSIONS: Non-disposable come in 3, 4, and 5 inch width.

17. MOR-LOC HEEL PROTECTOR & ELBOW PROTECTOR (MODELS 60-110 & 60-130)

    The Mor-Loc Heel and Elbow Protector are designed to protect the joints for bed patients. They are made of fire retardant allergy-proof Kodel synthetic pile fabric with hook and loop closure. SIZE: One size fits all.

18. MOR-LOC KNEE IMMOBILIZER (MODELS 50-160, 50-180, 50-190 & 50-220)

    The Mor-Loc Knee Immobilizer is a knee orthosis designed to stabilize and support the knee and its surrounding area for individuals who have a lower limb injury. It is made from a lightweight, breathable duck fabric. It is Helencia lined with foam inserts, heavy steel stays, and a patella cover. There are 2 wide straps above and 2 wide straps below knee with hook and loop closures. SIZES: Small to Extra Large. DIMENSIONS: Lengths of 12.5, 16.5, 18.5 and 23.5 inches.

19. MOR-LOC KNEE LOC (MODEL 50-123)

    The Mor-Loc Knee Loc is an knee orthosis designed to offer support to the knee and its surrounding area for individuals who have lower limb injuries. It is an all elastic support with hook and loop closures. There is an opening over the patella and in the back of the knee sot that it can bend comfortably. DIMENSIONS: Available in 8 inch lengths.

20. MOR-LOC KODEL BED PADS (MODELS 60-140, 60-150 & 60-160)

    Mor-Loc Kodel Bed Pads are decubitus pads designed to provide comfort and prevent bed sores for individuals who are bed ridden. They are made with fire retardent allergy-proof Kodel synthetic pile. DIMENSIONS: Available in pads measuring 24 x 30 inches, 30 x 40 inches, and 30 x 60 inches.

21. MOR-LOC LUMBAR SUPPORT (MODEL 10-144)

    The Mor-Loc Lumbar Support, model 10-144, is a low back orthosis designed to support the back for individuals who experience back strain. It has elastic sides and a foam and white duck back. There are four pre-shaped steel stays in the back. The support closes in the front with hook and loop along with three extra webbing straps with truss hooks. Tapering in th front gives a comfortable fit. SIZES: Available in small, medium, large and extra-large. DIMENSIONS: 8.5 inches in front, 13 inches in back.

22. MOR-LOC ROCKER BOTTOM CAST SHOES (MODELS 60-010, 60-015, 60-016)

    Mor-Loc Rocker Bottom Cast shoes are cast boots designed to offer support and protection for individuals who have a cast on the lower limb. They are made of canvas duck fabric or water resistant vinyl. They have a Duck inner sole and slip resistant rocker outer sole and 3 velcro strap closures. An open toe or closed toe model are available. SIZES: Infant, Small to Extra large.

23. MOR-LOC ROUND-A-BOUT (MODEL 60-215)

    The Mor-Loc Round A Bout is a cylindrical cervical pillow designed to maintain proper alignment of the neck while sleeping for individuals who have neck or back strain. The product is filled with Dupone Dacron Holofill polyester fibers. DIMENSIONS: 7 inches diameter x 17 inches.

24. MOR-LOC SAC-RO-10 (MODELS 10-109, & 11-109)

    The Mor-Loc Sac-Ro-10 is a low back orthosis designed to provide relief of temporary low back pain for individuals who experience chronic back pain. It slightly tapers in the front and uses hook and loop closure. Two additional webbing straps give additional support to bring the removable foam pad tight against the lumbar/sacral area. Model 11-109 replaces the webbing straps with elastic overlaps with hook and loop closure. OPTIONS: A removable foam pad for extra back support. SIZES: Available in small, medium, large and extra-large. DIMENSIONS: 10 inches wide in back, 8 inches wide in front. Elastic overlaps are three inches.

25. MOR-LOC SAC-RO-20 (MODELS 10-146, & 11-146)

    The Mor-Loc Sac-Ro-20 is a low back orthosis designed for relief of temporary back pain for individuals who experience back strain. This brace consists elastic sides and preshaped steel stays in a breathable duck back. It closes in the front with hook and loop closure. Two webbing straps give additional support. In the deluxe model, the webbing straps are replaced by two elastic pulls that use hook and loop closure. SIZES: Available in small, medium, large and extra-large. DIMENSIONS: Extends 12 inches in the back.

26. MOR-LOC SAC-RO-FORM & SAC-RO-FORM DELUXE (MODELS 15-023 & 18-023)

    The Mor-Loc Sac-Ro-Form, model 15-023, is a low back orthosis designed to provide firm abdominal support for individuals who experience back strain. It is designed to help prevent the back and stomach from becoming dependent on the support of the belt. The insert belt is made of elastic with hook and loop front closure. This belt can be worn under clothing without unsightly bulges. It provides abdominal support while being flexible enough to allow functional activities. The Deluxe model offers extra spport by using two side pulls to provide additional pressure for the insert. It also has a hook and loop closure. OPTIONS: Sacro-Form Insert made to heat in water. Deluxe insert made to heat in heating tray. SIZE: Small, medium, large and extra-large . One size insert for all belts. DIMENSIONS: Both have a nine inch width.

27. MOR-LOC SAC-RO-LOC (MODELS 10-100, 10-101, 11-101, 10-121 & 10-124)

    The Mor-Loc Sac-Ro Loc is a back support designed for temporary relief of low back pain for individuals who experience back aches. The basic design is model 10-100. It is a washable, elastic belt with hook and loop closure. It is tapered in the front for comfort and support. A pull web strap is added to pull a removable foam pad in back firmly against the sacrum. Model 10-101 has no additional strap, but does have a removable foam pad. Model 11-101 has a non-tapered front. Model 10-121 is tapered with a removable foam pad, and has flexble stays in darts on each sides of the belt. Model 10-124 is the same as model 10-121, with additional webbing straps that close in front for extra support. SIZE: Available in small, medium, large and extra-large. DIMENSIONS: Models 10-100, 10-101, and 11-101 are six inches wide in the back. Models 10-121 and 10-124 are eight inches wide in the back.

28. MOR-LOC SOFT TOUCH CLAVICLE

    The Mor-Loc Soft Touch Clavicle is a shoulder brace with 2 wide anterior straps designed to fit into the delto-pectoral grooves and a single narrow strap that crosses midchest. The straps fit through a D-ring in the back and fasten in the front. SIZES: Small through Extra Large.

29. MOR-LOC TAG-A-LONG & CERV-O-CURVE

    The Mor-Loc Tag-A-Long & Cerv-O-Curve are cervical pillows for individuals who need to maintain proper posture while sleeping. They are made of polyurethane foam with Dupont dacron Holofill II and a polyester lining. The pillow is especially contoured to give comfortable support to the neck area. Different styles of the Cerv-O-Curve offer diferent support areas depending on your need. The Tag-A-Long is a smaller version of the Cerv-o-Curve designed for travelling purposes. DIMENSIONS: 17 x 20 inches (Cerv-O-Curve model) and 17 x 15 inches (travel Tag-A-Long model).

30. MOR-LOC UNIVERSAL KNEE IMMOBILIZER (MODELS 50-490, 50-500 & 50-510)

    The Mor-Loc Universal Knee Immobilizer is a knee orthosis designed to stabilize and support the knee and surrounding area for individuals who have lower limb injuries. It is made of foam laminated to a velcro loop fabric with movable lateral stays. Hook and loop straps pull from shaped posterior stays. This orthosis can be fitted individually by trimming eith scissors. SIZE: Universal, One size fits all. DIMENSIONS: Available in lengths of 13, 18 or 23 inches.

31. MOR-LOC UNIVERSAL RIB BELT & RIB BELT (MODELS 20-001, 22-002, 20-102, & 21-102)

    The Mor-Loc Rib Belt and Universal Rib Belt are designed to provide support to the rib cage area for individuals wh\ith rib fracture or separateion. They feature all elastic construction with hook and loop closures. The female model has contoured front for comfort and correct fitting. SIZE: Available in men's or women's waist sizes Small through Extra Large. DIMENSIONS: 6 inches wide.

32. MOR-LOC VINYL WRIST AND FOREARM SPLINT & UNIVERSAL WRIST AND FOREARM SPLINT (MODELS 50-145, 51-145, 52-145, 50-311, 51-311, 52-311)

    The Mor-Loc Wrist and Forearm Splint is designed to stabilize and immobilize the wrist and forearm for individuals who have an upper limb injury. The Vinyl splint is vinyl-foam-nylon laminate while the Universal is made of foam brushed nylon. They feature removable aluminum stays and an open thumb, and have hook and loop closure with buckles. The splint comes in models for the left or right hand. SIZE: Small to Extra Large. The Universal is one size. DIMENSIONS: Fits wrist and forearms 6 to 14 inches, and measures 7, 9 or 11 inches.

33. MOR-LOC WRIST RESTRAINTS

    Mor-Loc Wrist Restraints are designed to stabilize patients who are bed ridden. They are made of fire retardent allergy-proof Kodel synthetic pile with long nylon webbing that straps to the sides of a bed or wheelchair. They have a hook and loop closure and they are packaged in pairs. SIZE: One size fits all.

34. MOR-LOC WRIST-LOC & UNIVERSAL WRIST-LOC (MODELS 50-106 & 50-310)

    The Mor-Loc Wrist-Loc is a wrist support designed to stabilize the wrist for individuals with wrist injuries. It is made of all elastic with a double wrap to give extra support for sprained and strained wrists. The Universal model is designed as a one size fits all. It has a hook and loop closure. SIZE: Small, Medium, Large, and Extra Large. DIMENSIONS: 3 inches wide; 10, 12, 14, and 15 inches long, respective to sizes.

35. PEDIREST

    The PediRest is a footstool designed for use by individuals with lower extremity and back disabilities. This wood footstool features two height settings and an angled slatted wood top.

36. SLEEP KNEE SPACER SPINE RELIEVER CUSHION

    The Sleep Knee Spacer Spine Reliever Cushion is a knee positioner designed for use by individuals with arthritis or back pain. This contoured foam pillow fits between the user's knees while sleeping on his/her side to provide proper support for the spine. Front and rear bumpers prevent rolling on the stomach. DIMENSIONS: 6 x 8 x 10 inches.

37. SPINE RELIEVER BACK SUPPORT BED WEDGE

    The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.

38. WEDGE NO FLUX INFLATABLE BED WEDGE

    The Wedge No Flux Inflatable Bed Wedge is a positioning wedge designed for use by individuals with eating or swallowing disabilities including hiatal hernia, acid reflux, heartburn, or GERD. Intended for use in the prone position, this portable positioning wedge elevates the user's upper body to a height of up to 6 inches when inflated. The positioning wedge features a travel/carrying case, a hand pump, and a removeable, washable cotton cover. DIMENSIONS (HxLxW): 6 x 36 x 24 inches when inflated; 10 x 10 x 1.5 inches when folded. WEIGHT: 28 ounces. COLOR: Blue.

39. WHEELNEST SEATING SYSTEM

    The WheelNest Seating System is a portable system for prolonged, balanced seating in wheelchairs, cars, office or other chairs that has a molded seat, solid seat and solid back inserts, and gel flotation seat cushion. WheelNest provides a balanced underseating as well as lumbar back support; helps maintain proper lordosis (curvature of the spine), correct hip position and proper spine alignment; and helps prevent decubitus ulcers. BACK SUPPORT: The back support is made of padded, contoured layered wood with an adjustable, removable lumbar support. Positioning straps designed to adjust and maintain a desired seating level are included. UNDERSEATING: The seat insert features a pommel for leg separation and alignment and contoured sides for balance and maneuverability. It also has a concave form and a sacral cut-out designed to relieve pressure at the ischial tuberosities and coccyx (tail bone). CUSHIONING SYSTEM: For the protection of tissue and skin, the WheelNest cushioning system features a visco-elastic polymer (AKTON) pad bonded to a layer of polyurethane foam overlaid on a wood base. This base was designed to prevent slouching and reduce shear forces on the skin. AKTON is a coherent, soft solid which does not bottom out; it adjusts to the shape of any surface it contacts then returns to and permanently holds its original shape when not under load. Since it is a solid, AKTON will not leak if punctured. COMPONENTS: WheelNest seating system, right and left lateral pelvis wedges, adjustable and removable lumbar support pad, front/back hip positioning wedge, half-inch and one-inch lateral pelvis elevation units, and one-inch hip positioning elevation unit. DIMENSIONS: 18 x 16 inches or 16 x 16 inches. WEIGHT: 7.5 pounds for the 18-inch model, 6.5 pounds for the 16-inch model. COLORS: Blue, black, and burgundy. WARRANTY: Two-year limited.

See Jobri LLC products that are no longer available.