Adaptivemall.com / Bergeron Health Care

15 South Second Street
Dolgeville, New York 13329
United States
Telephone: 800-371-2778 or 315-429-7112.
Fax: 315-429-8862.
Web: http://www.adaptivemall.com.
Email: info@adaptivemall.com.

Products distributed by Adaptivemall.com / Bergeron Health Care (listed alphabetically)

1. ABLEWARE ROLLING SHOWER CHAISE

   The Ableware Rolling Shower Chaise is a caster shower chair designed for use with children with mobility disabilities. FRAME: Aluminum frame with an extended front bumper bar to protect the child's feet. SEAT: A molded seat in lavender or turquoise. The seat has adjustable safety straps, a four-position, height-adjustable headrest, a holder for a hand-held shower, and a soap holder. CASTERS: Four black casters. The two rear casters include foot-operated brakes.

2. ALVEMA ITO STROLLER

   The Alvema Ito Stroller is a lightweight tilt-in-space stroller designed for use by children with physical disabilities. FRAME (HxLxW): The folding frame is available in two sizes. Folded dimensions are 23 x 13 x 30 inches (small) or 25 x 13 x 33 inches (large). The total width is 23 inches on the small size or 25 inches for the large size. Standard features include a height adjustable handle. Other optional accessories include a basket, sunroof, rain/wind cape, or grip rail. SEAT (LxW): 9 to 11 x 8 to 11 inches (small) or 11 to 14 x 10 to 13 inches (large). The seat back height is 20 to 24 inches (small) or 23 to 28 inches (large). It comes with standard postural supports that remain in place when the stroller is folded. Other standard features include adjustable seat tilt (12 to 32 degrees), adjustable lap belt, and adjustable pelvic support. Optional positioning accessories include a headrest, back extender, pelvic harness, vest harness (small, medium, or large), H-harness, X-harness, abductor, or lateral trunk support. CUSHION: Machine washable, breathable mesh seat and back cushions. A removable knee cushion is standard, and a lumbar cushion is optional. UPHOLSTERY: Olive green, beige, gray. WHEELS: Two front swivel wheels and two larger solid, fixed-direction rear wheels. FOOTRESTS: Foldaway footplate is height adjustable from 5.5 to 11 inches (small) or 8 to 14 inches (large). CAPACITY: 55 pounds (small) or 88 pounds (large). Maximum user height is 47 inches (small) or 57 inches (large). WEIGHT: 25 pounds (small) or 27 pounds (large).

3. ALVEMA SILVER PIXI POSITIONING CHAIR

   The Alvema Silver Pixi Positioning Chair is a stroller designed for use by children ages 3 to 12 with cerebral palsy, neurological disabilities or other disorders that require more complex positioning. Constructed of aluminum steel, this stroller features adjustable ergonomic handles, and lightweight foot brake. FRAME: Available in large and small models, this silver frame stroller has a lightweight folding powder-coated steel and aluminum tubing frame with a push handle. SEAT (DxW): 9.75 x 11 inches (small) or 13.75 x 13 inches (large). Molded ergonomic seat insert with a back that reclines from 85 to 120 degrees at the release of a knob. The seat is width and depth adjustable and is equipped with a lap belt. CUSHION: The cushions (included) are machine washable. CASTERS: Front wheels are 7-inches in diameter, and rear pneumatic wheels are 10-inches in diameter. FOOTRESTS: The footplate adjusts from 6 to 11 inches (small) or 9 to 13 inches (large). CAPACITY: 77 pounds (small) or 110 pounds (large). WEIGHT: 27.5 inches. WARRANTY: 2 year warranty.

4. ALVEMA TRAX 600 ALL TERRAIN STROLLER

   The Alvema Trax 600 All Terrain Stroller is an indoor/outdoor all-terrain stroller designed for use with children from eight to 16 years of age with mobility disabilities. FRAME: The folding tubular frame features an integral push handle, growth adjustments, and spring shock absorbers. The stroller is 24.5 inches wide. SEAT (WxDxH): 11.5 to 15.5 inches x 9.75 to 16.5 x 17.75 inches. The back height adjusts from 22 to 30.75 inches. The seat features105 to 127 degrees of tilt. Lateral supports and a lap belt are included. Optional positioning accessories include an abductor, an H-harness, positioning vest, pelvic harness, and a headrest. CUSHIONS: Included. BRAKES: Hand brakes on the push handle. WHEELS: Four quick-release mag wheels with all-terrain tires. FOOTRESTS: One-piece footboard. OPTIONS: Canopy and accessory bag. CAPACITY: For persons up to 5 feet two inches tall weighing up to 143 pounds. WEIGHT: 45.5 pounds.

5. AQUATEC BELUGA BATH LIFT

   The Aquatec Beluga Bath Lift is a powered bath lift designed for use by individuals with mobility disabilities. This battery powered lift lowers to 2.5 inches from the bottom of the tub, then its back support reclines 35 degrees. To return to the top, the back comes to the upright position and the lift rises to the top of the tub. The lift is operated with a push button hand control. A red safety light glows when there is not enough charge in the battery to run the lift for a full cycle, and a safety circuit prevents the lift from lowering if there is not enough charge to raise it again. The lift has machine washable, removable covers made from blown PVC, and can be used with or without these covers. OPTIONS: Head support; sand wedge cushion to elevate the knees; rotary seat with transfer board; height adapter for deeper tubs; nylon carrying bag. POWER: Uses a rechargeable battery.

6. AXIOM MOBILITY XPLORER 2

   Axiom Mobility Xplorer 2 is a stroller designed for indoor or outdoor use by children with cerebral palsy, mobility disabilities, or severe physical disabilities. Features include an aluminum frame, adjustable footplate and straps, indoor swivel wheels, push-button wheel release, safety wrist strap, all-weather rain canopy, and tire pump. DIMENSIONS (HxLxW): 48 x 58 x 24 inches open and 14 x 40 x 20 inches folded and without wheels. The seat (LxW) is 15 x 15 inches and the back height is 28 inches. The lower leg length is adjustable from 14.5 to 21 inches. The wheel diameter is 16 inches. CAPACITY: 150 pounds. WEIGHT: 37 pounds. COLORS: Red or navy blue. WARRANTY: 20 years.

7. AXIOM MOBILITY XPLORER 3

   The Axiom Mobility Xplorer 3 is a stroller designed for indoor or outdoor use by children or adolescents with cerebral palsy, mobility disabilities, or severe physical disabilities. FRAME (HxLxW): Open the stroller is 52 x 48 x 27 inches and folded it is 14 x 40 x 23 inches. The frame is made from welded aluminum, and comes with a padded height-adjustable push handle, a sun canopy with viewing window, and a basket measuring 12 x 19 x 15 inches. SEAT (LxW): 15 x 18 inches. The reclining padded seat is equipped with a 5-point harness and a behind-the-seat pocket and bottle holder. UPHOLSTERY: Removeable, machine-washable reflective fabric. ARMRESTS: Includes wrist straps. BRAKES: Handbrakes and rear foot brake. WHEELS: 16-inch alloy wheels with push-button release and front swivel-wheel conversion. A tire pump is included. FOOTRESTS: Adjustable footplate with straps for positioning. Leg length is adjustable from 14.5 to 21 inches. CAPACITY: 200 pounds. WEIGHT: 39 pounds. WARRANTY: 20 years.

8. BRONCO WALKER

   The Bronco Walker is a child walker designed for outdoor use. This walker features a wide, stable base with four widely-spaced smooth-running wheels with large outdoor tires. Each wheel has brakes and directional stabilizers for safety. Other features include a removable back support, padded lateral supports, a handrest bar, padded armrests and handles, padded lateral supports, and an attendant handle. The unit disassembles for transport and storage. SIZES: Size 0 for children ages 0 to 3, size 1 for children ages 3 to 6, and size 2 for children ages 6 to 9. DIMENSIONS (WxLxH): Size 0 is 37.5 x 23 x 21.5 to 26 inches. The seat height adjusts 10.5 to 14.5 inches and the tilt angle adjusts from 92.5 to 110 degrees. Size 1 is 42 x 26 x 23 to 32 inches. The seat height adjusts fro 13 to 20 inches and the tilt angle adjusts from 92.5 to 110 degrees. Size 2 is 49 x 29 x 27.5 to 46.5 inches. The seat height adjusts from 17 to 24 inches and the tilt angle adjusts from 92.5 to 110 degrees. CAPACITY: Size 0 has a capacity of 66 pounds, size 1 has a capacity of 88 pounds, and size 2 has a capacity of 110 pounds. WEIGHT: Size 0 weighs 27.5 pounds, size 1 weighs 29.7 pounds, and size 2 weighs 34.1 pounds.

9. BUFFALO TILT TABLE

   The Buffalo Tilt Table is designed for therapeutic use with children and adults with mobility disabilities. This table can be used for prone or supine standing, as a tilt table for therapy, or for postural drainage. This unit features a steel frame with vinyl powdercoat finish, a solid wood body support covered in vinyl, trunk and head extensions, lateral supports, a back support, pommel, knee and heel supports, a tray, and a motorized assist, and casters for mobility. OPTIONS: Trunk cushions. SIZES: Size 1, size 2, and size 3. DIMENSIONS (WxL): Size 1 is 19 x 28 inches and 29 to 45 inches (including optional cushions) from the foot support to the top of the padding. The unit is 22 to 26 inches high in the horizontal position. The positioning angle adjusts from 90 to 185 degrees. Size 2 is 21 x 34 inches and 35 to 63 inches (including optional cushions) from the foot support to the top of the padding. The unit is 26 inches high in the horizontal position. The positioning angle adjusts from 90 to 185 degrees. Size 3 is 24 x 34 inches and 49 to 67 inches (including optional cushions) from the foot support to the top of the padding. The unit is 28 inches high in the horizontal position. The positioning angle adjusts from 90 to 185 degrees. CAPACITY: Size 1 has a capacity of 110 pounds, size 2 has a capacity of 154 pounds, and size 3 has a capacity of 220 pounds. WEIGHT: Size 1 weighs 42 pounds, size 2 weighs 51 pounds, and size 3 weighs 73 pounds.

10. CARRIE ACTIVITY BASE (MODEL PC 4641C)

    The Carrie Activity Base, model PC 4641C, is designed to elevate and add mobility to the Carrie Seat for peer interaction and activities. The base is designed for use with the Elementary and Pre-School Carrie Seats (see separate entry). Rear wheels allow for moving the seat around the immediate area.

11. CARRIE POTTY SEAT (MODELS PC 2771P & PC 2771J)

    The Carrie Potty Seat is a child commode designed to be positioned over a toilet or used as a free-standing unit. The shape of the commode maintains the user's legs in slight flexion and abduction to encourage bowel and bladder functions. Lateral supports and a tray help provide trunk stability. A built-in anti-thrust seat maintains pelvic positioning. The seat is made of Tumble Forms' high-density foam and covered with a flexible coating, making the Potty Seat washable, seamless, impervious to body fluids, stain-resistant, and non-toxic. The commode includes an adjustable tray, height-adjustable footrest, removable splash guard, neck brace, hip and chest harness, removable bucket for use as a commode, and locking casters on the base. OPTIONS: Risers are available for both models to raise chair height. SIZES: Two models are available. The Carrie Potty Seat (model PC 2771P) is designed for children 38 to 48 inches tall. The Junior seat (model PC 2771J) accommodates children measuring 48 to 58 inches tall. CAPACITY: The Potty Seat accommodates children weighing 30 to 60 pounds and the Junior model accommodates children weighing 50 to 100 pounds. COLOR: Teal.

12. CARRIE ROVER STROLLER (MODELS 4642, 4643. 4644, & 4645)

    The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be used as separately as a positioning chair or a car seat. The collapsible wheeled base features front swivel casters and oversized pneumatic rear tires. The Small Adult model features a heavy-duty base and larger tires. SIZES: Preschool (model 4642), Elementary (model 4643), Junior (model 4644), and Small Adult (model 4645). DIMENSIONS: The Preschool/Elementary size base folds to 12.5 x 22 x 30 inches; the Junior size base folds to 12.5 x 24 x 30 inches; and the Small Adult unit folds to 36 x 24 x 16 inches.

13. COLUMBIA TOILET SUPPORT (MODELS 4700 & 4800)

    The Columbia Toilet Support, models 4700 and 4800, is a high-backed toilet support designed to provide head and trunk support for children and adults with balance disabilities. The unit has a full-length, height adjustable, high-impact ABS plastic back and a harness with a safety buckle. The support bolts directly to the toilet and the children's model, model 4700, includes a seat reducer ring. Model 4800, the adult model, sits 4 inches further back on the toilet seat than model 4700. OPTIONS: A footrest/armrest unit and padded support cushions are available. DIMENSIONS: The back is 14.5 inches wide and height- adjustable from 16 to 24 inches. COLOR: White. WARRANTY: One year full warranty against defects.

14. COLUMBIA TOILET SUPPORTS (MODELS 4200, 4300, & 4400)

    The Columbia Toilet Supports are back supports designed to provide lateral support to the torso of children, youth, and adults with disabilities which affect their balance when seated. The supports fit all toilets and attach under the bolts of a standard seat. The units come with a chest strap and safety buckle. The Child's model includes a seat reducer ring. OPTIONS: Armrest/footrest units and padded support cushions are available for all models. DIMENSIONS: Small or child's size (model 4200) is 8.5 inches wide and adjusts from 7 to 15 inches high; medium or junior adult size (model 4300) is 12 inches wide and the height adjusts from 7 to 16 inches; and the large or adult size (model 4400) is 14 inches wide and the height adjusts from 10 to 17 inches. COLOR: White. WARRANTY: One year full warranty against defects.

15. COLUMBIA WRAP-AROUND BATH SUPPORT (MODELS 7200, 7300, & 7700)

    The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainless fittings. It disassembles for storage and transport. Model 7700 is the Hi-Back model. SIZES: Small (no. 7200) and medium (model 7300). OPTIONS: Padded support cushions are available for each model. DIMENSIONS: The back on model 7200 is 8.5 inches wide; the back on model 7300 is 12 inches wide; and the back on model 7700 is 14 inches wide. The height adjusts from 9 to 14 inches on model 7200; the height adjusts from 10 to 14 inches on model 7300; and the back adjusts from 19 to 23.5 inches on model 7700. WARRANTY: One year full warranty against defects.

16. CROCODILE GAIT TRAINER

    The Crocodile Gait Trainer is designed for use in developing the walking skills of children with cerebral palsy or balance, neurological, or lower extremity disabilities. Standard features include a folding frame, anti-reverse locks, a height- adjustable back frame, rotational hand grips, directional lockout, and large solid wheels. OPTIONS: Sling seat; fold down seat; anti-tips; forearm supports with hand grips; and pelvic supports. SIZES: Sizes 1 and 2. DIMENSIONS (LxW): Size 1 is 28.75 x 24.5 inches overall and size 2 is 33.5 x 26 inches overall. The wrist to floor handle height is 16 to 29.5 inches (Size 1) or 20 to 34 inches (Size 2). The handle width is 8 to 20.5 inches (Size 1) or 9.5 to 22 inches (Size 2). CAPACITY: 66 pounds (Size 1) or 99 pounds (Size 2). WEIGHT: 12.1 pounds (Size 1) or 14.3 pounds (Size 2). COLORS: Yellow or orange.

17. CRUISAIRE (MODELS CA11 & CA13)

    The Cruiseaire is a child's transport chair designed for use with children with mobility disabilities. FRAME (WxHxL): Both models have a lightweight folding frame with a grey hammertone finish. Open, odel CA11 is 20 x 37 x 31 inches without footrests and model CA13 is 21.5 x 37 x 33 inches without footrests. Folded, both models are 13 x 11 x 47 inches. An optional anatomic back frame is available on both models which stabilizes the head and neck to assist in the development of righting reflexes. SEAT (WxD): Model CA11 is 11 x 9 to 12 inches and model CA13 is 13 x 10 to 13 inches. The seat to footrest height adjusts from 6 to 11 inches on model CA11 and from 6 to 13 inches on model CA13. The seat to floor height adjusts from 20 to 22 inches on model CA11 and from 22 to 24 inches on model CA13. The back height is 20 inches on model CA11 and 21 inches on model CA13. An optional 5-inch back extension is available for model CA13. The seat to back angle can be set at 85, 90, 95, or 100 degrees on both models and the seat angle is 30 degrees on both models. Standard features on both models include a reinforced heavy-duty seat, a swing-away abductor, swing-away lateral support, an H-harness with padded strap covers, and a variable position headrest. The optional anatomic frame includes ABS stiffeners that can be custom contoured. UPHOLSTERY: Removable, washable fabric upholstery in a choice of electric blue, purple, plum, turquoise, or red. A matching canopy is included. ARMRESTS: Integral armrests. BRAKES: Foot-operated brakes on the rear wheels. WHEELS: Four composite caster wheels with solid tires. FOOTRESTS: Adjustable footplates with ankle and heel straps. CAPACITY: Model CA11 has a capacity of 60 pounds and model CA13 has a capacity of 80 pounds. WEIGHT: Model CA11 weighs 14.5 pounds without the footrests and model CA13 weighs 15.5 pounds.

18. CRUISER READY

    The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests are standard. BRAKES: Toggle brakes on the rear wheels are standard. CASTERS: Front swivel casters are standard. WHEELS: Rear composite wheels are standard. FOOTRESTS: Independently adjustable footplates with heel loops are included. WARRANTY: Five years.

19. CRYSTAL DROP BALLS

    Crystal Drop is a balance training device designed for use with individuals with physical and neurological disabilities. These inflatable balls may be sat upon, bounced, caught, etc. DIMENSIONS: Available in 50, 70, and 90 centimeters in diameter. COLOR: Clear

20. DELUXE TURTLE THERAPY SYSTEM (MODELS 2882 & 2883S )

    The Deluxe Turtle Therapy System, model 2882. and 2883S is a complete system designed for vestibular stimulation and sensory integration therapy. The system, model 2882, consists of the Turtle dome, a padded scooter, T-stool leg attachment, net swing with rope and ascender, therapy record booklet, and complete Turtle Methods Manual. All components of the systems fit into the Turtle dome for storage. Model 2883S includes the padded scooter and T-stool leg attachment only.

21. ETAC STING WHEELCHAIR

    The Sting is a lightweight manual wheelchair for children. FRAME: Steel frame; available in black, red, plum, seagreen, lilac, or blue. Detachable push handles standard. SEAT: Seat width is available in 11, 12, or 13 inches; seat depth is adjustable from 11 to 14 inches. Backrest is angle adjustable. CUSHION: Optional. UPHOLSTERY: Washable velour and polyester; black. ARMRESTS: Optional. BRAKES: Brakes with extension arm standard. CASTERS: 5 or 6 inch solid front casters. WHEELS: 20, 22 or 24 inch rear wheels with pneumatic tires and quick release axles. HANDRIMS: Stainless steel oval are standard; nylon coated stainless steel or cellular rubber are optional. CAMBER: 3 degrees. FOOTRESTS: Platform footrest with adjustable height, depth and angle swing underneath the seat. Rigid attachment platform optional. OPTIONS: Anti-tip bars, seat belt, side guards, trunk support, and trays. WEIGHT: 24 pounds.

22. EZ RIDER CONVERTIBLE (MODELS 174MC, 174MBC, 174TBC & 174TC)

    The EZ Rider Convertible is an attendant-propelled child transport chair or stroller that converts to a standard child manual wheelchair. This chair is designed for use with children ages 5 to 13 who have some upper body control. FRAME (LxWxH): Folding, lightweight, flexible steel frame with black powder coat finish. Models 174MBC and 174TBC have been crash tested and include tie-down brackets. Models 174MC and 174MBC are 44 x 20.5 x 36.5 inches open and 44 x 13 x 12.25 inches folded; models 174TC and 174TBC are 46 x 24 x 36.25 inches open and 44 x 13.25 x 13.75 folded. SEAT: A sling seat is standard. A reinforced seat with stiffeners and standard or reinforced seats cut back 2 inches are available. The seat is 14.75 inches wide for Model 174MC and 174MBC and 17.75 inches for models 174TC and 174TBC. The seat depth is adjustable from 10.5 to 13.5 inches on the 174MC models and from 12 to 15 inches on the 174TC models. The back is 19.75 inches high on the MC models and 17.25 inches on the TC models. The seat to footrest distance adjusts from 1.75 to 19 inches on the MC models an from 2 to 22 inches on the TC models. The seat-to-back angle is 100 degrees on all models. UPHOLSTERY: Removable purple fabric upholstery is standard; ocean blue, navy blue, teal, burgundy, and raspberry are also available. ARMRESTS: Foam padded armrests are standard. BRAKES: Toggle brakes on the rear wheels are standard. CASTERS: 6-inch front casters are standard. WHEELS: 8-inch rear wheels are standard; 11-inch wheels are available for all models. Standard 24-inch wheelchair wheels are included to convert this chair from a stroller to a self-propelled chair. The wheels can be snapped on and off the frame as needed. The 24-inch wheels may be used without removing the rear stroller wheels. FOOTRESTS: Independently adjustable, swing-away footplates are optional. OPTIONS: Trunk support with waist belt, torso vest, hip abductors, shoulder straps and padded strap covers, headrest extension, and others. CAPACITY: 175 pounds for the MC models and 250 pounds for the TC models. WEIGHT: Model 174MC is 21.5 pounds and model MBC is 23.5 pounds (without 24-inch wheels) and model 174TC is 22.5 pounds and model TBC is 24.5 pounds (without 24-inch wheels). WARRANTY: This product is warranted against defects in workmanship and materials for five years.

23. GATOR GAIT TRAINER

    The Gator Gait Trainer is a child's adjustable reverse walker designed for use by children 18 months to six years of age with lower extremity, balance, or walking disabilities or cerebral palsy. This walker provides built-in growth capability. The fully accessorized model comes complete with width- and height-adjustable handgrips, arm troughs, forearm supports, pelvic pad, anti-tip bars, sling seat, ankle prompts, swivel front casters, caster pin locks, and a rear frame bumper. The unit has a steel frame that folds for transport and storage and has a powder-coat finish. OPTIONS: Bike grips and foam grips are available. DIMENSIONS(HxLxW): 25.5 x 9 x 23 inches. The maximum user height is 45 inches. The handle height adjusts from 13.5 to 26 inches. COLOR: Blue or yellow.

24. GATOR REVERSE WALKER, THE

    The Gator Reverse Walker is a child's or junior walker designed for children with walking and balance disabilities. This walker features a folding powder-coated steel adjustable growth frame. and adjustable handgrips and arm troughs. The adjustable grips and troughs enable the unit to provide individual arm orientation for exact handgrip width adjustment. This reverse walker is also equipped with front swivel casters, caster pin locks, padded grips, and a rear frame bumper. DIMENSIONS: The handle height adjusts from 13.5 to 26 inches. The maximum user height is 45 inches. COLOR: Fluorescent yellow or vibrant blue.

25. GAZELLE BY R82

    The Gazelle is a prone stander designed for use by children with mobility disabilities. Available in three sizes, this stander may also be used for postural drainage and as a tilting table with a variety of adjustments between 15 and 90 degrees. It features a Y-shaped base with four locking wheels, foot-pedal angle adjustment and a degree meter, height- and width-adjustable footrests, rear support, padded chest support, and padded knee supports. The leg rests are independently adjustable with each leg having a maximum spread of 60 degrees. OPTIONS: Interior and exterior side supports, trunk support extensions, head support with facial aperture, standard tray, and a tray with a bowl. DIMENSIONS (LxW): Size 1 is 19 x 30 inches, Size 2 is 23 x 34.5 inches, and Size 3 is 25.5 x 39 inches. CAPACITY Size 1 has a capacity of 88 pounds, size 2 has a capacity of 132 pounds, and size 3 has a capacity of 176 pounds.

26. HIGH-LOW CHAIR

    The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-lined trunk support, shoulder straps, and a hip belt. The segmented design of the seat back permits the trunk support and shoulder straps to be positioned specifically for the child. This chair also features tilt-in-space capability (15, 20, or 25 degrees), a removable abductor, and includes a melamine tray that locks securely in place with a quick-release lever. OPTIONS: Lateral head and trunk support. DIMENSIONS: The seat depth adjusts from 7 to 10 inches and the seat width is 12 inches. The seat back is 22 inches high. On the pedestal base, the chair adjusts from 19 to 24 inches. The floor sitter is 7.5 inches high. The wheels are 2 inches in diameter. The tray is 12 x 18 inches. CAPACITY: 75 pounds. WEIGHT: 46 ponds.

27. JENNSWING

    The Jennswing is a swing with torso support designed for use by children with mobility disabilities. This lightweight, roto-molded plastic swing provides total body support, including upper and lower torso and legrest support. The swing includes upper torso and waist safety straps and armrests. It can be attached to any standard outdoor swing set, used indoors with its own stand (included), or suspended from the ceiling (proper hooks required). OPTIONS: Seat, head gear, safety clasps, and arm and leg straps. CAPACITY: 100 pounds.

28. KAYE POSTURE CONTROL WALKER & KAYE POSTUREREST WALKERS

    The Posture Control Walker is a child's walker designed for use by children 18 months of age through adolescence with mobility disabilities. Available in six sizes, these reverse walkers are designed to make walking less energy consuming and improve rhythm and timing. The walkers have folding anodized aluminum frames and most models are available with two wheeled front legs and two rear legs with crutch-style tips to create friction with the floor and slow walker speed, or with four wheels. The smaller walkers are available with a choice of a "B" or "J' frame style. The lighter weight J frame is available in the three smallest sizes only, is suitable for limited ambulation, and has two support bars behind the user. The B frame is slightly bulkier and heavier than the J frame to accommodate an older user and more vigorous ambulation; three support bars behind the user provide greater reinforcement. The H frame is designed for an older, taller, heavier user and is designed for use with four wheels. All styles provide support behind the child, requiring a more upright posture and placing the center of gravity within the walkers base of support. In all frame styles, the upper most bar strikes the hip extensors during single limb stance, facilitating extension on the weight-bearing side. The handgrips with flanged ends olace the child's arms and hands at his/her sides as he/she takes weight on the extended arms. The depth of the walkers prevent the hands from getting too far ahead of the body. As the child grows and develops, this configuration allows the elbows to be slightly behind the midline of the body, aiding thoracic extension and scapular adduction for straighter, more upright posture. The PostureRest Walker offers the same features as the Posture Control models plus a built-in seat that folds up when not in use. The PostureRest walker is available in most configurations. OPTIONS: Forearm supports, pelvic stabilizers, guide handles for small frame, all-terrain wheels, and leg extensions to convert to two-wheel, four-wheel, or four-wheel walkers with locking front swivel wheels. COLOR: The B and H frames have red handgrips and the J frame has blue grips. The smaller sizes are available with a choice of a blue or silver frame. The larger sizes and the H frame are available in silver only.

29. KIMBA TRS TWIN TANDEM & KIMBA TRS PLUS TWIN TANDEM

    The Kimba TRS Twin Tandem is designed for use with children with mild to moderate disabilities and the Kimba TRS Plus Twin Tandem is designed for use with children with moderate to severe disabilities. This stroller offers dual reclining and tilt-in-space seating system frames on an in-line stroller frame. The seats can face forward or backward and individuals seats can be chosen to meet the user's specific needs. CAPACITY: 110 pounds.

30. MACLAREN MAJOR 2000

    The Maclaren Major 2000 is a stroller designed for use with children with mobility disabilities. FRAME: Folding square-section aluminum frame with square grip handles. The frame folds to 46 x 9.75 x 8.25 inches. The handle to ground height is 41 inches. SEAT (WxD): 15.5 x 11.5 inches. The seat back is 22 inches high. The seat to floor height is 23 inches in the front and 18 inches in the back, The standard seat is a sling seat with harness. Options include a removable, washable padded seat; a chest pad; and lateral pad inserts. UPHOLSTERY: Plaid upholstery (Green Ginger, Louis Blue, or Marie Claire). ARMRESTS: No. BRAKES: Foot-operated brakes on the rear wheels. WHEELS: Four 7-inch double wheels. The front wheels swivel. FOOTRESTS: Three-position detachable footrest. OPTIONS: Sunshade, wind/rain screen for use with sunshade, and an attachable under seat shopping bag. CAPACITY: 140 pounds. WEIGHT: 13.75 pounds without the footrest and 15.4 pounds with the footrest.

31. METRO BASIC BUGGY (MODELS 3M, 3MB, & FRAME ONLY)

    The Metro Buggy is a basic stroller designed for use with children ages 5 to 12 or those who are of similar height and weight. FRAME (LxWxH): Ultra-lightweight folding frame with push handles and a blue baked-on enamel finish. This stroller is 39 inches high x 23 inches wide when open. Folded dimensions are 49 x 11 x 9 inches. Model 3MB includes bus tie-down brackets. SEAT: The seat is 14 inches wide and 12 inches deep. The seat to floor height is 20 inches. The seat back is 26 inches high. An integrated contoured seat with a reinforced back and seat belts is standard on all but the Frame Only model. UPHOLSTERY: Removable, washable, breathable, anti-bacterial fabric in a painted desert pattern. ARMRESTS: Foam padded armrests are standard. BRAKES: Toggle brakes on the rear wheels are standard. CASTERS: 6-inch front casters are standard. WHEELS: 8-inch rear wheels are standard. FOOTRESTS: A single-piece footrest or independently adjustable swing-away footplates are optional. CAPACITY: 125 pounds. WEIGHT: 16 pounds. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 5 years (1 year for fabric).

32. MOBILE FLOOR SITTER

    The Mobile Floor Sitter is designed to enable moving a properly positioned child with physical disabilities to another area or activity without having to reposition. The mobile base for the medium and large models are made of wood with the Tumble Forms covering and locking ball casters. The extra large mobile base is made of steel tubing with locking casters. The units come complete with a Feeder Seat (see separate entry) and Mobile Base, or the Mobile Base may be ordered separately. SIZES: (Large) fits children up to 60 inches tall. (Medium) fits children up to 48 inches tall. (Extra Large) accommodates adolescents up to 72 inches tall.

33. PANTHER

    The Panther is a child's tilt-in-space wheelchair designed for children with mobility disabilities. FRAME: Polyester-coated steel frame collapses for transport and storage. The frame is available in three sizes and in a choice of bright raspberry, deep blue, or silver. Rear anti-tippers are standard. Size 1 (WxHxL) is 59 x 87 to 111 x 84 centimeters; size 2 is 62 x 87 to 111 x 92; and size 3 is 67 x 87 to 111 x 100 centimeters. SEAT: Solid seat and back with tilt in space and a low shear reclining back are standard. Height-adjustable push handles are included. Backrest extensions, shoulder retractors, swing-away or fixed lateral supports, pommel, splashboards, H-belts, pelvic belts, abduction belts, abductors, waistcoat harnesses, and cross vests are optional. This chair is available without a seat to accommodate specialized seating systems. UPHOLSTERY: The standard chair has no upholstery; the complete model includes upholstered seat and back cushions. ARMRESTS: Optional. BRAKES: Wheel locks are standard. Drum brakes are optional. CASTERS: A choice of 6-, 7-, or 8-inch solid casters or 8-inch pneumatic casters is standard. Quick-release caster forks are optional. WHEELS: A choice of 20-, 22-, or 24-inch wheels with pneumatic tires and spoke guards is standard; solid tires are extra-cost options. Quick-release axles are standards on wheels without drum brakes. FOOTRESTS: A height- and angle-adjustable footplate is standard. Swing-away knee blocks and footplate straps are optional. OPTIONS: Wood trays, clear plastic trays, thermo bags, rucksacks, and a hooded raincape. WEIGHT: The complete model weighs 35 pounds.

34. PEDALO SYSTEM (MODELS PD-4, PD-2, & PD-1)

    The Pedalo System is a balance training device designed for use by children and adults with neurological or lower extremity disabilities. These six-wheeled devices utilize a split base and axle to utilize a walking motion to propel them. Shifting weight from side to side and front to back move the devices forward and backward. The Barren-Pedalo, model PD-4, features removable horizontal parallel bars, making this model suitable for children who can stand but not walk unassisted and use their arms for support and balance. The Reha-Pedalo, model PD-2, is equipped with removable parallel upright poles and requires better lower extremity control than model PD-4. This model is most suitable for children who use canes or crutches or who walk independently. The poles are designed for balance assistance, but not for weight bearing. Weight shift must be initiated through the lower extremities. Models PD-4 and PD-2 are long enough for an adult to stand behind the user to aid with weight shift and coordination. The Double-Pedalo is a smaller model and is long enough for one foot to fit on each side. This model can be used with Kaye Balance Poles (sold separately; see entry). DIMENSIONS: Models PD-4 and PD-2 are 5.75 inches wide x 43.5 inches long on each side and 16.75 wide overall. The horizontal parallel bars on model PD-4 are 27.5 inches long and adjust from 27.25 to 35 inches above the base. The upright parallel poles on model PD-2 adjust from 28 to 36 inches above the base. Model PD-1 is 18 inches long x 16.75 inches wide.

35. PONY BY R82

    The Pony is a child wheeled walker with a seat designed to provide support while walking for children with developmental delays. Available in two sizes, this walker features an arrow-shaped base with five wheels, a J-shaped padded seat, a padded rear support, a padded chest support, and padded handle bars. Positioning can be adjusted for optimum use within 40 degrees from vertical. OPTIONS: Hip supports, abdominal support, and vertically adjustable hand holds. DIMENSIONS (WxL): Size 1 is 27 x 28 inches with a chest support that adjusts from 24 to 32 inches high; the seat height adjusts from 15 to 20 inches high. Size 2 is 30 x 41 inches with a chest support that adjusts from 30 to 41 inches high; the seat adjusts from 19 to 25 inches high.

36. PRE-SCHOOL PRONE STANDER (MODEL 106) & CHILD'S PRONE STANDER (MODEL 104)

    The Pre-School Prone Stander, model 106, and the Child's Prone Stander, model 104, are prone boards with casters designed for use by children with neurological or balance disabilities. These standers are designed to be supported against a sturdy table or counter. The units are adjustable to vary the angle from horizontal and adjustable table/counter rests allow positioning at different distances supporting surfaces. The units latch to the supporting surface with cord, hook, and eye screws for safety. Other features of these wooden frames include non-tip bases, adjustable footplate, foot straps, foot wedges, knee pads (one on model 106 and two on model 104) , lateral pads, and two safety belts. The fully-adjustable footrest accommodates variable degrees of dorsiflexion or plantar flexion of the ankles. Shoe clamps secure hard-soled shoes and the angle of the clamps controls internal or external rotation of the hips, as well as hip abduction. The foot wedges position pronation or supination of the hips. Model 106 accommodates children from15 months to eight years of age (24 to 49 inches tall) and model 104 accommodates children from 18 month to 11 years of age (26 to 58 inches tall). OPTIONS: Adjustable abductor wedge, lateral knee supports, and a conversion kit for a solid pelvic stabilizer. DIMENSIONS: Model 106 can be used at tables from 17 to 30 inches high. The removable lateral trunk supports adjust to fit 6 to 8 inch chests. The main chest cushion is 7.5 inches wide x 13 inches long. The lower cushion is 14 inches wide x 5 inches high. Model 104 extends from 24 to 36 inches high for use at higher tables and counters. The removable lateral trunk support adjusts to fit 7 to 10 inch chests. The main chest cushion is 8.5 inches wide x 15.5 inches long. The two lower cushions are 14 inches wide x 5 inches high. The safety straps on both models are 4 x 54 inches and 2 x 54 inches.

37. PRONE STANDERS WITH DESK (MODELS 102, 103, & 107)

    The Prone Standers with Desk, models 102, 103 and 107, are designed for use by children and adults with mobility and neurological disabilities. Models 102 and 103 are designed for children 18 months to 11 years of age, up to 58 inches tall; Model 107 is designed for users from years of age to adult, or from 48 to 71 inches tall. FRAME: Wooden with an extended base for near vertical positioning, adjustable angle varies 40 to 80 degrees from horizontal. The base has 4-inch swivel locking casters (optional on model 103; standard on model 107) that can be narrowed to fit doorways, then widened for stability. FEATURES: Removable, padded side trunk supports that adjust vertically and laterally; a tray that tilts from vertical to horizontal and has a rail to prevents objects from falling; two lower pads for placement above and below the knees; adjustable footrests to accommodate dorsiflexion or plantar flexion of the ankles; adjustable angle shoe clamps to fit hard soled shoes for controlling internal or external rotation of hips; and two safety belts. OPTIONS: Abductor wedge (with 4 x 7 inch or 7 x 10 inch pads) has independent width and angle adjustments. DIMENSIONS: For both models, stander length is adjustable without altering the footrest position and width is adjustable from 4 to 6 inches or 4 to 7 inches; tray is 20 x 22 inches; hip belts are 4 x 54 inches, and either 2 x 54 inches or 4 x 65 inches; and the caster base is 29.5 x 54 inches;

38. RABBIT

    The Rabbit is a mobile standing aid designed for use by children ages 1 to 18 with mobility disabilities. Equipped with wheelchair-style wheels, this unit includes an adjustable support frame, adjustable body supports, and adjustable knee supports. A tool kit for making the adjustments also is included. Other standard features include a pommel, chest strap, foot holders, heel supports, and a play box to enable children to store and transport belongings. The unit disassembles for storage and transport. The frame is composed of aluminum tubing with additional plastic parts. UPHOLSTERY: Polyurethane on padded supports. OPTIONS: Spoke covers for the wheels and a tray for the play box. DIMENSIONS (LxWxH): 24.25 to 35 inches; 24 to 27.25 inches; 26.25 to 59.75 inches. Camber is 8 degrees for the smallest size and 4 degrees for other sizes. CAPACITY: 89 to 154 pounds. WEIGHT: 29.5 to 40.5 pounds.

39. SAFARI TILT FRAME, SAFARI TILT BASIC, & SAFARI TILT ANATOMICAL

    The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The Basic model features a heavy-duty seat with anti-thrust planar inserts and seat depth adjustability. The Anatomical model has a heavy-duty seat with a semi-contour planar seat insert and an anatomical back with removable and reformable splines. Padded shoulder positioning straps are optional. The seat is 14 inches wide and the depth adjusts from 12 to 16 inches. The seat to footrest distance is adjustable from 10 to 14 inches and the seat height from the floor is 23 inches. The seat to back angle is 90 degrees. A growth seat and custom seating options are available. TILT AND RECLINE: The tilt angle adjusts from 5 to 45 degrees with adjustable 5-degree reclines for increased flexion. UPHOLSTERY: The Basic and Anatomical models feature a choice of Nile green, Mediterranean blue, or deep burgundy washable, padded Cordura fabric upholstery. ARMRESTS: Pivot armrests are standard on the Basic and Anatomical models. BRAKES: Attendant-operated brakes on the rear wheels. CASTERS: 8-inch microcellular molded front casters on all models. WHEELS: 12-inch microcellular molded rear wheels on all models. FOOTRESTS: Angle-adjustable elevating legrests with depth-adjustable, independently height-adjustable swing-away footrests are standard on the Basic and Anatomical models. A padded calf support is available. Footrests are not included with the Frame Only model. OPTIONS: A tray and positioning accessories are optional. CAPACITY: 125 pounds. WEIGHT: The Frame Only weighs 25.9 pounds, the Basic model weighs 31.6 pounds without footrests, and the Anatomical model weighs 38 pounds without the footrests.

40. SAMMONS PRESTON TUGS PEDIATRIC PRONE STANDER (MODEL 4617A)

    The Sammons Preston Tugs Pediatric Prone Stander, model 4617A, is a prone and supine stander designed for use by children with mobility disabilities. This stander is designed to keep children 25 to 48 inches tall in a prone position. Features include a fully vertical adjustable mainboard, knee board and footboard. Other features include a hand crank that provides quick and easy angle adjustments and nonslip, removable support pads that move to any position along the length of the board. Internal or external rotation, abduction and adduction are controlled with adjustable Velcro sandals on the footboard. Additional features include double locking casters, and an attached tray that adjusts in angle and height. The kneeboards are removable for smaller children and infants. DIMENSIONS (HxDxW): 36 x 42 x 25 inches. The tray is 24 inches in depth and width. The support pads are 6.5 x 7 inches. The Velcro sandals are 3 x 7 inches. CAPACITY: 100 pounds.

41. SAMMONS PRESTON VERSA FORM POSITIONING PILLOWS (MODELS 2820, 2822, 2821 & 2823)

    Sammons Preston Versa Form Positioning Pillows, models 2820, 2821, 2822, and 2823, are body positioner pillows designed to provide support and proper positioning for children and adults with physical disabilities. These pillows are filled with styrene beads which conform to the shape of the user. When air is extracted using a vacuum pump, Versa Form molds to the body shape, creating firm support. When a valve is released, allowing air into the pillow Versa form regains its flexibility and is ready to be reshaped again. The pillow can be maintained in a specific shape, or it can be repeatedly reshaped for use in a variety of environments. Versa Form supports all parts of the body uniformly, with even weight distribution, reducing the risk of pressure points. The pillows can be used for support in bathtubs and whirlpools, in bed, on the floor, in strollers, in wheelchairs, and to meet other positioning needs. They can also be used in temporary posture correction and for evaluation. The Versaform Repair Kit (model 2820K) is included. OPTIONS: Versa Form Vacuum Pump (model 2825). DIMENSIONS: Model 2820 is 22 x 12 inches; model 2821 is 22 x 26 inches; model 2822 is 22 x 34 inches; and model 2823 is 16 x 20 inches.

42. SPECIAL TOMATO MPS CAR SEAT

    The Special Tomato Multi-Positioning Seat Car Seat Version is a child's car seat designed for use by children and youth with physical disabilities. The seat has adjustable seat, head, and back cushions and offers a choice of regular or extended size seat cushions, allowing the seat width and depth to be adjusted to accommodate the child's growth. Other features include a seat shell, a latch strap and tether strap for in-vehicle use, and safety attachment straps for use outside of a vehicle. The seating surface's adjustable modular cushions are made of a soft, latex-free material impermeable to fluids. SIZES: Small and large. DIMENSIONS (LxW): The small seat cushion is 8 x 9 inches, the small extended seat cushion is 10 x 10 inches, the large seat cushion is 12 x 13 inches, and the large extended seat cushion is 14 x 15 inches. COLORS: Blue or plum.

43. SPECIAL TOMATO MULTI-POSITIONING SEAT (MPS)

    The Special Tomato Multi-Positioning Seat (MPS) is a youth positioning seat designed for children ages two to fourteen years old with severe physical disabilities. This chair features Hip Flex adjustment to provide seat to back angle positioning with adjustments of 15 degrees hip flexion and 15 degrees hip extension without recline. The chair adjusts to grow with the user and the cushions adjust to meet the child's positioning needs. The thigh depth extension seat cushion allows for growth. Features include height-adjustable head and back cushions with lateral support, a height-adjustable footrest, and a five-point adjustable belt system. Attachment straps secure the seat to most standard home and school chairs. OPTIONS: A tilt-in-space mobile floor base, a push chair base, and an activity tray. SIZES: Small, extended small, large, and extended large. DIMENSIONS: The small seat is 9 inches wide x 8 inches deep. The extended small seat is 10 inches wide x 10 inches deep. The seat to footrest height adjusts from 6 to 16 inches. The height to the top of the back cushion adjusts from 15 to 20 inches and the height to the top of the head cushion adjusts from 22 to 27 inches. The outside seat width is 15.25 inches and the floor to seat height is 14 inches. The large seat is 12 inches wide x 13 inches deep and the large extended seat is 14 inches wide x 15 inches deep. The seat to footrest height on both models adjusts from 11 to 16 inches. The height to the top of the back cushion adjusts from 19 to 22 inches and the height to the top of the head cushion adjusts from 26 to 30 inches. The outside seat width is 19 inches and the floor to seat height is 16 inches. CAPACITY: The small seat and the small extended seat have a capacity of 80 pounds. The large seat and the large extended seat have a capacity of 150 pounds. WEIGHT: The small seat weighs 26 pounds, the small extended seat weighs 27 pounds, the large seat weighs 31 pounds, and the large extended seat weighs 33 pounds. COLOR: Two-tone plum or two-tone blue.

44. SPECIAL TOMATO SOFT-TOUCH SITTER

    The Special Tomato Soft-Touch Sitter is a floor sitter designed for use by chiildren with phsyical disabilities. The sitter promotes proper head, neck, and trunk alignment, and can be attached to a standard chair with attachment straps, or to the optional tilt wedge or mobile tilt wedge. It is made from a soft, latex-free material that is impermeable to fluids. OPTIONS: Tilt wedge and mobile tilt wedge. SIZES: 1, 2, 3, 4, or 5. DIMENSIONS (HxLxW): 25 x 12 x 12 inches (Size 1), 29 x 14 x 14 inches (Size 2), 34 x 16 x 16 inches (Size 3), 40 x 19 x 18 inches (Size 4), or 44 x 21 x 20 inches (Size 5). Inside seat dimensions (LxW) are 7 x 8 inches (Size 1), 9.5 x 10 inches (Size 2), 11.5 x 12 inches (Size 3), 13.5 x 14 inches (Size 4), or 16 x 16 inches (Size 5). The seat back height is 21 inches (Size 1), 26 inches (Size 2), 29 inches (Size 3), 35 inches (Size 4), or 39 inches (Size 5). WEIGHT: 6 pounds (Size 1), 10 pounds (Size 2), 13 pounds (Size 3), 15 pounds (Size 4), or 19 pounds (Size 5). CAPACITY: 40 pounds (Size 1), 60 pounds (Size 2), 80 pounds (Size 3), 110 pounds (Size 4), or 200 pounds(Size 5). WARRANTY: Three-year manufacturer warranty.

45. SPECIAL TOMATO SOFT-TOUCH THERAPY ROLL

    Special Tomato Soft-Touch Therapy Rolls are therapy and positioning rolls designed for use by children or adults with physical disabilities. The rolls are made from a soft, seamless, latex-free material that is impermeable to fluids, with a solid inner core (except for the 4 x 24 inch size). Each roll has a handle and can stand on end for storage. DIMENSIONS: 24 inches long with diameter of 4, 6, or 8 inches; 36 inches long with diameter of 8, 10, or 12 inches; and, 48 inches long with diameter of 12, 14, or 16 inches. COLORS: Blue or plum. WARRANTY: Three-year manufacturer warranty.

46. SPECIAL TOMATO SOFT-TOUCH THERAPY WEDGE

    Special Tomato Soft-Touch Therapy Wedges are positioning wedges designed for use by children or adults with physical disabilities. They are made from a soft, seamless, latex-free material that is impermeable to fluids. The degree of incline ranges from 10 to 28 degrees on the 20-inch-wide wedges and 12 to 24 degrees on the 24-inch-wide wedges. The wedges have a built-in handle opening and a concave surface that allows the wedge to stand on end for storage. DIMENSIONS (HxLxW): 4, 6, 8, or 10 x 22 x 20 inches or 6, 8, 10, or 12 x 28 x 24 inches. COLORS: Blue or plum. WARRANTY: Three-year manufacturer warranty.

47. SWAN ALL-PURPOSE COMMODE BY R82

    The Swan All-Purpose Commode by R82 is a caster commode chair for children. The chair consists of a fiberglass seat and a stainless steel frame; these materials allow the SWAN to be used as a shower chair as well. Features include a reclining seat (plus/minus 15 to minus 30 degrees), height adjustable legs, tray, and optional heightrest units. This commode can be used with standard toilets or with a commode pan. The molded seat includes a pommel/urine deflector. DIMENSIONS: Seven sizes are available; dimensions per size range from 22 to 44 centimeters seat width, 20 to 45 centimeters seat depth, and back heights from 37 to 49 centimeters. OPTIONS: Available accessories include headrests, upholstery, white or transparent commode pans, wheelset, footrests, harness, seat belt, 4 locking casters, or tray.

48. THERAPY MATS (MODELS 804YB, 805YB, & 806YB)

    Therapy Mats are folding mats for activities requiring a firm, cushioned surface. The mats are made of plastic foam covered with non-absorbent, washable nylon- reinforced vinyl. Wide Velcro strips are attached to the ends for joining two or more mats together. DIMENSIONS: Model 804YB is 4 x 8 feet, model 805YB is 5 x 10 feet, and model 806YB is 6 x 12 feet. The mats fold in 2-foot panels for transport and storage.

49. TONICROSS TRICYCLES (MODELS JM-1, JM-2, & JM-3)

    ToniCross Tricycles are child or junior tricycles designed for use by children from 2.5 years of age through adolescence with mobility or neurological disabilities. These tricycles are chain-driven from the rear wheels, placing the pedals directly under the seat for an easier pedaling motion. A limited front-wheel turning radius, wide wheelbase, and low center of gravity aid in safety and stability. The seat and upright handlebar height are adjustable and the hand brake can be placed on the right or the left side. OPTIONS: Back support with trunk support, foot supports, leg abductor system, stationary variable resistance exercise stand, and more. SIZES: Model JM-1 is small, model JM-2 is medium, and model JM-3 is large. DIMENSIONS: The small model fits children with 15 to 17.5 inch inseams. The medium model fits children with 17.5 to 22.5 inch inseams. The large model fits children with 22.5 to 27.5 inch inseams.

50. TUMBLE FORMS 2 RAISED ROLLS (MODELS 2789A THRU 2789D)

    The Tumble Forms 2 Raised Rolls, models 2789A thru 2789D, are therapy rolls designed to offer the positioning options of conventional rolls with the stability of a wedge. They have a flat bottom with tall sides and a curved top to provide a stable base for bolster sitting, side leaning, or prone positioning. Smaller rolls can be used for knee or ankle flexion and cervical elongation. A Velcro strip on the bottom of each roll holds it in place for active or static therapies. DIMENSIONS (HxWxL): Model PC 2789A is 2 x 4 x 18 inches ($48.05); model 2789B is 3 x 4 x 18 inches ($58.97); model 2789C is 4.5 x 6 x 24 inches ($85.18); and model 2789D is 6 x 8 x 30 inches ($119.03).

51. TUMBLE FORMS 2 READY RACER (MODEL 4770R)

    The Tumble Forms 2 Ready Racer, model 4770R, is a hand propelled cart designed to help improve perceptual motor coordination for children with upper extremity and mobility disabilities. The cart is intended to improve perceptual motor skills, strengthen arms and upper trunk, and allow peer play for children 18 months to 5 years of age. The cart allows the child to play at peer level in indoor settings, and to maneuver in tight places. The cart moves easily over carpet and rough surfaces with minimal arm strength. It is particularly useful in early childhood programs for improving perceptual motor skills and strengthening the arms and upper trunk. The cart features pneumatic tires and a front swivel caster; molded wheel rims to fit small hands; a seat position that allows 15- degrees knee flexion and a 90-degree seat-to-back relationship; and a low front design for easy self-transfer. A lateral trunk support, lateral leg support, and a 45- degree hip strap are all included. Other features include a lightweight, high density foam chassis covered with moisture proof easy-to-clean Tumble Foam coating. OPTIONS: An adjustable-height handle. DIMENSIONS: 35 x 20 inches overall; the inner seat is 13.5 x 9.5 x 23 inches. CAPACITY: 55 pounds.

52. TUMBLE FORMS 2 TADPOLE PEDIATRIC POSITIONER (MODEL 4772T)

    The Tumble Forms 2 Tadpole Positioner, model 4772T, is designed specifically for early intervention programs serving infants from birth to three years of age with cerebral palsy, motor delays, or other motor dysfunctions. The Tadpole allows the therapist to position the child/infant in prone, seated, postural drainage, and sidelying positions. The unit includes the base, one half roll with lateral supports, a half roll, a positioning strap, and a tray with mirror comes complete with a carrying bag. OPTIONS: An additional half roll (model 4772TH), a wedge (model 4772TW), and a tray with a mirror (model 4772TM) are available. DIMENSIONS (LxW: The base is 34 x 19 inches.

53. TUMBLE FORMS 2 UNIVERSAL CORNER CHAIR (MODEL 4590U)

    The Tumble Forms Universal Corner Chair, model 4590U, is a corner seat positioning chair designed to fit children up through adolescence or up to 60 inches tall. The chair has a broad base to help prevent tipping due to extensor thrusting, and a built-in abductor block which supports a tray (included). The foam padded seat and back support have a hip positioning belt and height adjustable H-harness support. The seating system is covered with the colorful, washable Tumble Forms coating that is impervious to body fluids, seamless, and non-toxic. The removable tray has a folding support to raise it to 30 degrees above horizontal. DIMENSIONS: (HxDxW): 20 x 26 x 22 inches. The seat is 20 x 10 x 13 inches. The tray is 10 x 20 x 22 inches. The depth of the tray's cut out is 8 inches in diameter and the width is 14 inches. CAPACITY: 125 pounds.

54. TUMBLE FORMS 2 UNIVERSAL SIDE LYER (MODEL 2798)

    The Tumble Forms 2 Universal Side Lyer, model 2798, is designed to position children with neurological disabilities. The size accommodates children from preschool-age through adolescence. The base is angled so that gravity helps position the child. The child may lie on the left or right side. Two soft, foam padded belts with Velcro closures holds the child firmly yet gently in place. The Tumble Forms seamless covering is urine proof, washable, and non-toxic. OPTIONS: Two block modules may be purhcased separately (model 2796A) to provide a headrest and leg abductor. DIMENSIONS (LxW): 42 x 23 inches.

55. TUMBLE FORMS BARREL CRAWL/ ROLL (MODEL 4163B)

    The Tumble Forms Barrel Crawl/Roll, model 4163B, is a cylindrical therapy roll with a hole in the middle large enough for young children to crawl through. The vinyl coated foam construction is designed to increase user confidence and to be safer than metal barrels. The teacher or therapist can gently rock the barrel to provide rhythmic movement. As children progress, they will learn better trunk control as they shift their weight to roll the barrel. DIMENSIONS: 22-inch outside diameter; 11-inch inside diameter. COLOR: Blue.

56. TUMBLE FORMS CARRIE COLLAR (MODEL 2774C)

    The Tumble Forms Carrie Collar, model 2774C, is a head and neck support designed to support the jawline and occipital region to help improve head control, neck flexion, and midline positioning for children who have physical disabilities. The collar may be used alone or with other seating systems. The horseshoe-shaped collar slips over the head, extends to the chest, and fastens in the front with a quick-release hook-and-loop fastener. The collar features the Tumble Forms waterproof coating.

57. TUMBLE FORMS CARRIE SEAT (MODELS 4641L, 4641M, 4641S, & 4641SA)

    The Tumble Forms Carrie Seat, models 4641L, 4641M, 4641S & 4641SA, are positioning seating systems designed for insertion in mobility systems such as strollers, wheelchairs, or in vehicles. They may also be used at home or in school. The seats come with an adjustable footrest, headrest, and tray. Standard features include an anti-thrust seat to stabilize the pelvis; a seat back which articulates 20 degrees to accommodate abnormal trunk tone; an adjustable footrest to maintain hip, knee, and ankle flexion; a height adjustable headrest; extended lateral head supports to keep the head in mid-line and neutral; vertical guides which adjust to the height of the shoulder straps; and a tether-strapping device to secure the seat in a chair or car seat. The molded seats are made of vinyl-coated high density foam. They are stain-and odor-resistant, washable, and impervious to body fluids. The shape of the seats follow the body's contours, providing lateral trunk support and shoulder protraction. The tray adjusts in and out, and tilts. OPTIONS: Carrie Cozee Cover. SIZE: Four models are available: Preschool, model 4641S, for children up to 38 inches tall; Elementary, model 4641M, for children 38 to 48 inches tall; Junior, model 4641L, for children 48 to 58 in hes tall; and Small Adult, model 4641SA, for individuals 58 to 68 inches tall. CAPACITY: The Preschool model accommodates children weighing 20 to 40 pounds. the Elementary model accommodates children weighing 30 to 60 pounds; the Junior model accommodates children weighing 50 to 100 pounds; and the Small Adult seat accommodates individuals weighing 60 to 130 pounds.

58. TUMBLE FORMS CRICKET WALKER (MODELS 1745L & 1745S)

    The Tumble Forms Cricket Walker is a nonfolding child adjustable wheeled walker with a seat. These prone training walkers accommodate children 2 to 8 years of age, help stimulate walking movements, and serve as a link to more advanced walking aids. The walkers feature a ring-style support/hand grip which can be converted to a U shape, two sets of double front wheels and two single rear wheels, and a range of grwoth adjustments. OPTIONS: Saddle and trunk support. DIMENSIONS: Model 1745S (Small Cricket Walker): The frame height to saddle adjusts from 10.1 to 14 inches; the frame height with saddle adjusts from 13.5 to 17.4 inches; maximum length is 31.2 inches; maximum height is 28.1 inches; the support ring is 8.5 inches in diameter; and, the ring height adjusts from 9 to 12.9 inches. Model 1745L (Large Cricket Walker): The frame height to saddle adjusts from 14 to 17.9 inches; the frame height with saddle adjusts from 17.4 to 21.3 inches; maximum length is 33.9 inches; maximum height is 32 inches; the support ring is 8.5 inches in diameter; and, the ring height adjusts from 9 to 12.9 inches. WEIGHT: The small model weighs 16.5 pounds and the large model weighs 18.7 pounds.

59. TUMBLE FORMS DELUXE SQUARE MODULE SEATING SYSTEM (MODELS 2797 & 2795P)

    The Deluxe Square Module Seating System, models 2797 and 2795P, are floor sitters designed to support and position children with neurological disabilities. The complete seating system (2797) includes the seat and the following geometric positioning shapes: 2 long and 2 short rectangles, 2 triangles, 1 ring, and 1 disk. The positioning shapes only (minus the base seat) are available separately (2795P). The modules are vinyl covered foam with rounded edges. The child sits in the chair with his/her legs fitting into the cutout portion; the sides and back of the chair support the trunk and the back. The triangular or rectangular positioning wedges fit into the seat to decrease the size for a smaller child. DIMENSIONS: Base measures 20 inches square x 11 inches. COLOR: Blue and red.

60. TUMBLE FORMS FEEDER SEAT (SERIES PC 2795)

    The Tumble Forms Feeder Seat is designed to provide secure trunk positioning and posturally correct seating for infants or children with physical disabilities while feeding, learning, or resting. The seats feature a contoured interior with a 90-degree seat-to-back orientation, a 45-degree hip strap, and a quick-release H-belt shoulder harness with slots allowing 4 inches of vertical adjustment. The seats may be used in a chair or stroller, on the floor, or on a parent's lap. The Tumble Forms' seamless covering is washable, odor and stain resistant, and impervious to body fluids. OPTIONS: A tray/table is available for use with the small, medium, and large Feeder Seats (see separate entry). SIZES: Small, model PC 2795N, accommodates infants and children up to 36 inches tall. Medium, model PC 2795M, accommodates children up to 48 inches tall. Large, model PC 2795X accommodates children up to 60 inches tall. Extra large, model PC 2795Y, accommodates adolescents up to 72 inches tall. DIMENSIONS (HxW): Small is 21 x 10.5 inches; Medium is 27 x 14 inches; Large is 34 x 17 inches; and Extra Large is 41 x 21 inches.

61. TUMBLE FORMS JETTMOBILE (MODELS 4768C & 4769C)

    The Tumble Forms Jettmobile, model 4768C and model 4769C is a hand-propelled cart designed to develop neck, shoulder and arm muscle coordination and maintain the user in an extension position. Features include protective fenders, a hip strap for positioning, and concealed ball bearing casters. The cart includes 3 positioning shapes and an Abductor Wedge. DIMENSIONS: Two models are available. Model 4768C (Child) is 28 inches long for children up to 40 inches tall and model PC 4769C (Adolescent) is 38 inches long for children up to 60 inches tall. CAPACITY: The child model capacity is 125 pounds and the adolescent model supports up to 200 pounds.

62. TUMBLE FORMS ROLLS (MODELS 2794A THRU 2794J)

    The Tumble Forms Rolls are therapy rolls, models 2794A thru 2794J, are designed for use in rolling or rocking movements, positioning, and coordination training for people with physical or neurological disabilities. These bolsters have a solid core to prevent bottoming out (except the 4 inch size). The rolls have the seamless, urine resistant, and washable Tumble Forms coating. DIMENSIONS (H x L): Model 2794A is 4 x 24 inches; model 2794B is 6 x 24 inches; model 2794C is 10 x 36 inches; model 2794D is 12 x 36 inches; model 2794E is 14 x 48 inches; model PC 2794F is 8 x 24 inches; model 2794G is 8 x 36 inches; model 2794H is 12 x 48 inches; and, model 2794J is 16 x 48 inches. WARRANTY: 5 years.

63. TUMBLE FORMS ROUND SCOOTER BOARD (MODEL 4814B)

    The Tumble Forms Round Scooter Board, model 4814B, is designed for use by children with some sitting balance to encourage trunk control. The scooter features washable Tumble Forms coating on a wooden platform, 2-inch swivel casters, and loop handles for holding on and safety. DIMENSIONS: 24 inches in diameter. CAPACITY: 100 pounds.

64. TUMBLE FORMS UNIVERSAL GRASSHOPPER (MODEL 4775)

    The Tumble Forms Universal Grasshopper, model 4775, is a body positioner system designed for use with children and adults with physical disabilities. The Grasshopper consists of 17 different shapes and forms for adaptive support. Among the positions that can be incorporated into the therapeutic program using this system are side-lying, prone, supine, long-leg sitting, and log-roll sitting. By attaching the Tumble Forms log to the base, the Grasshopper becomes an active therapeutic treatment system for vestibular stimulation activities. The Grasshopper system includes: 1 padded coaster base with locking casters, 1 large wedge, 1 small wedge, 1 accessory wedge, 2 quarter roll supports, 1 center adductor module, 2 abductor modules, 1 log, 1 trapezoid module, l rectangular module, 2 wrap straps, 1 hip strap, 1 pull strap, 1 side lyer strap. DIMENSIONS: The base is 56 inches long; the small wedge, 6 inches high; the large wedge, 8 inches high. The log is 4 feet long. The trapezoid module is 5 inches high x 18 inches long and the rectangular module is 5.5 inches high x 11 inches long.

65. VERTICAL STANDER

    The Vertical Stander is a prone standing frame for children from 18 months through 12 years who need support at the hips and pelvis to maintain standing alignment. FEATURES: The frame has a solid pelvic stabilizer for anterior, posterior and lateral positioning; a removable lower cushion for knee extension; removable adjustable foot supports for additional alignment of feet and ankles; a posterior pelvic pad that swings away and locks in place with a safety latch; removable lateral cushions; and a removable thoracic support. The posterior pelvic pad is positioned lower than the anterior cushion for vertical posture with pressure against the anterior iliac crests and sacrum. The fully extended base can be used for free standing, or the front extensions on the base can be retracted to form a smaller base for tilting the unit against a stable counter. OPTIONS: Tray and casters. DIMENSIONS: Overall height from footrest to top of pelvic stabilizer adjusts from 8 to 30.5 inches. Pelvic depth is adjustable from 3.25 to 6 inches, pelvic width adjustable from 5 to 11.75 inches. Base, fully extended, is 20 x 29.75 inches.

66. WALKABOUT

    The Walkabout is an ambulation aid for children who lack trunk stability or balance. Size adjustments include height, width, girth of chest controls and hip controls. The main column is height and angle adjustable. It is constructed of a lightweight aluminum alloy. It has a wheeled base with front casters and folds up for transportability. WEIGHT: 20 pounds.

See Adaptivemall.com / Bergeron Health Care products that are no longer available.