RehabMart, LLC

1353 Athens Hwy
Elberton, Georgia 30635-4484
United States
Telephone: 800-827-8283 or 706-213-1144.
Fax: 888-507-7326 or 678-254-1791.
Web: http://www.rehabmart.com.
Email: assistance@rehabmart.com.

Products distributed by RehabMart, LLC (listed alphabetically)

1. ABLEWARE TKO TURNING KNOB OPERATOR (MODEL H75310)

   The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, including triangular knobs larger than itself. DIMENSIONS: The base is 2.25 inches in diameter. The T-shaped handle is 5.25 inches long.

2. AQUANAUT (MODEL 180-00)

   The Aquanaut, model 180-00, is a molded elevated toilet seat and back support designed for use by children who require extra support while toileting. This children's toilet seat supports children in a forward-leaning posture that promotes relaxation and helps them to function on the toilet. It has a contoured sitting surface which provides support for the hips and thighs and a child-sized opening which is narrower in front and wider in the back for ease in hygiene. The unit also includes a removable front trunk support with channeled arm troughs that encourage the child to hold the support, contoured back support that cues the child to flex forward, lateral trunk support, adjustable knee loops to prevent the user from sliding forward and to discourage knee extension, a toilet adaptor for installation on any toilet, and a bi-level footrest. INSTALLATION: Once the adaptor is installed on the toilet, the removable seat is attached to the toilet by tipping the base back and sliding it under the adaptor. The seat is then lowered and locked in position. OPTIONS: Removable soft hip pads (1.25-inch pads for children with hips between 9 and 12 inches, or 2.5-inch pads for children with hps up to 9 inches); wall bracket for storage; . COLOR: Teal with purple accents and footrest.

3. ASSIST VISION SLIDER (MODEL 5510)

   The Assist Vision Slider, model 5510, is a handheld video magnifier designed for use by individuals with low vision. This magnifier has a built-in color TFT (thin film transistor) LCD (liquid crystal display) screen. It has rollers for maneuverability over flat surfaces, and a detachable camera for hard to access surfaces. The camera has a fixed focus and magnifies objects from 8.5 to 17.5 original size. Images can be viewed in full color, black and white, and reverse black and white, with adjustable contrast for clearer images. There is also a video-input terminal for distance viewing and video output for external TV connection. The magnifier comes with a power cable, video cable, carry bag, and instruction manual. POWER: Uses alternating current (AC) adapter (included) or built-in rechargeable nickel metal-hydride storage battery. DIMENSIONS (HxLxW): Power unit is 6.89 x 6.3 x 6.93 inches; Camera unit is 5.51 inches long x 1.38 inches in diameter. The screen display measures 6.4 inches diagonally. WEIGHT: 4.2 pounds. WARRANTY: 2 year limited warranty.

4. BACK-TO-BACK HOOK AND LOOP (MODEL A28690 &A28691)

   Back-to-Back Hook and Loop is hook-and-loop fastener designed for use with splints and other orthotics, or for positioning or restraint applications. The hook is on one side and the loop is on the other, permanently bonded back-to-back. DIMENSIONS: Available in rolls of 1 x 10 yards, 2 x 10 yards, 5/8 x 10 yards, 1 x 25 yards, or 2 x 25 yards. COLOR: White hook and royal blue loop.

5. BANANA PEEL

   The Banana Peel is a recumbent- or prone-style, leg-powered child tricycle designed for use by individuals with physical disabilities. Designed for riders from 44 to 61 inches tall, this cycle features a weather-resistant nylon sling seat with high back positioned between the rear wheels with a low center of gravity for stability. The pedals are located slightly in front of the front wheel. Handgrips for steering and balance can be found on either side of the seat. All three mag wheels are of equal diameter and have pneumatic tires. A safety flag with a mounting bracket and a front fender are included. OPTIONS: Harness and heel support foot straps. DIMENSIONSHxLxW): 23 x 48 x 32 inches. The seat height from crease to top is 16 inches. All wheels are 16 inches in diameter. CAPACITY: 150 pounds. WEIGHT: 30 pounds. COLOR: Yellow seat and black wheels.

6. BASELINE HI RES PLASTIC 360-DEGREE ISOM GONIOMETER (MODELS 12-1000HR, 12-1001HR, & 12-1002HR)

   The Baseline HiRes Plastic 360-degree ISOM Goniometer is a goniometer designed to measure joint range of motion (ROM) and axis of motion. The 360-degree head has three scales calibrated to be used with the International Standards of Measurement (ISOM), sagittal, frontal, and transverse with rotation (SFTR) recording method. The scale reads 1-degree increments. One arm has a linear scale in inches and centimeters. The device is made of clear plastic with solid background behind the gradations, numbers and text to provide high contrast for readability and resolution. DIMENSIONS: Length is 12 inches (model 12-1000HR), 8 inches (model 12-1001HR), or 6 inches (model 12-1002HR). COLOR: Transparent with white background behind gradations, numbers, and text.

7. BASELINE PLASTIC 360-DEGREE INTERNATIONAL STANDARDS OF MEASUREMENT (ISOM) GONIOMETER (MODELS 12-1000, 12-1001, & 12-1002)

   The Baseline Plastic 360-degree International Standards of Measurement (ISOM) Goniometer, models 12-1000, 12-1001, and 12-1002, is a goniometer designed to measure joint range of motion. The clear plastic construction permits observation of the joint's axis of motion and range of motion. The 360-degree head has three scales calibrated to be used with the ISOM system. A linear scale in inches and centimeters is included on the arm. DIMENSIONS: 6-, 8-, and 12-inch models are available.

8. BRAILLE AND LOW VISION MONOPOLY

   Braille and Low Vision Monopoly is a tactile board game designed with large print and braille for player who are blind or have low vision. Cards are extra large in sized with braille and large print. The game board has an overlay molded on to it so players can identify all the spaces and the location of the properties. The perimeter of each game space is labeled in braille and in print. Includes braille dice, braille cards, braille boards and complete braille instructions.

9. BRAILLE ROOK CARDS

   Braille Rook Cards are braille playing cards designed for use by individuals who are blind. This is a braille version of the bidding game with 23 variations. Rook is a partnership game for four players. The deck contains 57 cards and comes with complete instructions.

10. CAST SCISSORS FOR SERIAL FINGER CASTS

    The Cast Scissors for Serial Finger Casts are cast and splint scissors designed for use in finger splint and cast removal. For right- or left-handed use, these stainless steel scissors have slanted cutting surfaces for excellent force while maintaining safety. DIMENSIONS: The scissors are 3.5 inches long and the slanted surfaces are 0.5 inch long.

11. COGNITOYS SET (MODEL 5152)

    The Cognitoys Set, model 5152, is an arm exerciser and an eye hand coordination exerciser designed to improve reach, range of motion, midline crossing, and upper extremity strength and endurance through graded repetitive exercise for children and adults with physical and cognitive disabilities. The set consists of a wooden base with four removable wooden dowels of varying heights and 16 brightly colored firm foam shapes (rectangles, squares, triangles, and circles) with holes through the center for placement and stacking on the dowels. Exercises can be performed standing, sitting, or from a wheelchair, and the shapes can also be used to promote shape and color recognition. DIMENSIONS (HxWxD): The base is .75 x 35 x 12 inches. The dowels range up to 33.5 inches high.

12. CUBEX THERAPY SYSTEM ON WHEELS

    The Cubex Therapy System on Wheels is a fine motor training kit designed for use with individuals with neurological disabilities and/or who use wheelchairs. This wheeled station accommodates four users standing and/or in wheelchairs At the ends of the unit are 90-degree fold-away work surfaces with bolt boards and a pegboard that opens to 60 or 90 degrees. Other features include a slide-out full-width plastic-laminate work surface and a reversible activity board in the top with a pegboard on one side and a smooth easel on the other. The board rotates 360 degrees and locks flat or at a 60-degree angle. The unit also includes a locking double-door cabinet with four storage tubs and two shelves. The cart is equipped with heavy-duty swiveling, locking casters. Included with the system are 100 plastic pegs, 24 bolts, and five tools. DIMENSIONS (HxLxD): 38 x 38 x 24 inches. The end work surfaces adjust from 27 to 37 inches high. The casters are four inches in diameter.

13. DECPAC PERSONAL STANDARD RAMP (MODEL MP210)

    The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber grip surface will not scratch or mar flooring. The ramp has 4 panels and includes carry handles. DIMENSIONS (LxW): 34 x 33 inches. CAPACITY: 660 pounds. WEIGHT: 13 pounds. WARRANTY: Limited 1 year warranty against manufacturer’s defects.

14. DEVON DELUXE FOLDING SUPPORT RAIL

    The Devon Deluxe Folding Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. DIMENSIONS: The tubing 1.75 inches in diameter and the unit is 30 inches long. COLOR: White.

15. DOUBLE-SECURITY MITTS (MODELS 2814 & 2819)

    The Double-Security Mitts, models 2814 and 2819, are restraint mitts designed to prevent individuals with cognitive or emotional disabilities from injuring themselves or removing IVs or catheters. These machine-washable ambidextrous mitts feature double Velcro closures and fiber-fill-padded palms. Model 2814 has a mesh back and model 2819 has a padded back. Optional use connecting straps provide additional limitation of motion. SIZE: One size.

16. EASIEEATERS CURVED UTENSILS

    The EasieEaters Curved Utensils are a fork and spoon with built-up handles designed for use by children with weakened or painful grasps and limited upper extremity range of motion. Designed to facilitate help hand-to-mouth feeding, these dishwasher-safe lightweight utensils have large, long curved plastic handles with molded finger grips. Features include safety shields to prevent utensil from entering mouth too deeply. The set consists of one fork and one spoon. OPTIONS: Available for right or left hand with or without safety shield. DIMEMSIONS: The handle is three inches long; the shield is two inches wide. The bowl the spoon is one inch; fork tine is .75 inches long COLOR: The utensils are available in red, blue, and purple.

17. ELASTO-GEL CAST & SPLINT PADS

    The Elasto-Gel Cast & Splint Pads are orthoses liners designed to be used under casts, splints, pressure suits and garments, masks and dressings; to stabilize braces, orthotic and prosthetic devices; as padding for the prevention and treatment of decubitus ulcers; and to protect skin grafts. The pads are made from a formulated hydrogel which contains a natural skin moisturizer/conditioner. This hydrogel has properties which allow it to absorb excess perspiration from the skin and transmit it to the air, thereby "breathing" like the skin itself. The gel absorbs moisture under casts, splints and other devices without drying the skin. Since the gel is designed to eliminate maceration, moisturize the skin, and prevent friction, most problems associated with skin breakdown are avoided. The resilient properties of the gel help to protect the skin and underlying tissues from friction and pressure often exerted on bony prominences. Sold individually or in cases. Price listed is per unit. DIMENSIONS: 4 x 4 x 1/8 inches (CS5500, CS5555), 12 x 12 x 1/8 inches (CS5700, CS5777), and 8 x 16 x 1/8 inches (CS5800, CS5888).

18. ETAC HI-LOO RAISED TOILET SEAT WITH ARMRESTS

    The Etac Hi-Loo Raised Toilet Seat with Armrests is an elevated toilet seat with safety frame designed for use by individuals with balance, mobility, or lower extremity disabilities. The unit has removable flip-up armrests and sits firmly in position for safety during transfers. The seat has recesses at both front and back for person hygiene. The seat and lid are made of polypropene, and the armrests are made of epoxy polyester lacquered steel tube with a polypropene armrest cover. The riser is also available with an angled seat. DIMENSIONS (LxW): 18 x 23.5 inches. The seat is available in 6- or 10-centimeter high models with tops 2.5 or 4 inches above the porcelain. The angled model is 6 centimeters high in front and 10 centimeters high in back. The width between the armrests is 19.25 inches, and the height of the armrest above the upper side of the seat is 9 inches. WEIGHT: The 6 centimeter high seat weighs 10.8 pounds. The 10 centimeter high seat weighs 12.8 pounds.

19. EXTRA WIDE PERINEAL CUTOUT TUB TRANSFER BENCH (MODELS CQ-1730XDL & CQ-1730XDR)

    The Extra Wide Perineal Cutout Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This extra-wide bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench features vinyl grips on the tubing to prevent marring the tub; a removable short back that discourages reclining; and, "Tube in a Tube" construction for added strength. The bench is available in a wall to left (model CQ-1730XDL) or wall to right (model CQ-1730XDR) configuration. DIMENSIONS (HxLxW): 23.5 (back to floor) x 22 x 44 inches. The perineal openings are 11 inches long x 9 inches wide. The outside legs adjust from 18.5 to 20.5 inches to accommodate differences between tub and floor heights. CAPACITY: 650 pounds.

20. EZ-BATHE

    The EZ-BATHE is an inflatable bathtub designed for use with individuals with mobility disabilities or who are unable to leave the bed. The user is placed in the deflated tub on the bed using the half sheet transfer method. The 20-gauge vinyl tub Inflates with a vacuum pump in 30 seconds. A hand-held shower head connects to a bathroom faucet and a hose connects to a faucet at a sink or bathtub for filling and draining. The set includes the tub, an inflatable pillow, the hose, the shower head and connection, and a wet-dry vacuum pump. DIMENSIONS (LxWxD): 71 x 31 x 13.5 inches to fit individuals up to 6 feet 2 inches tall. The hose is 25 feet long. WARRANTY: 1-year warranty.

21. FUN CYCLE

    The Fun Cycle is a recumbent or prone-style, leg-powered tricycle designed for use by teens and adults with balance or physical disabilities. Designed for riders from 62 to 74 inches tall, this cycle features a weather-resistant nylon sling seat with high back positioned between the rear wheels with a low center of gravity for stability. The pedals are located slightly in front of the front wheel. Handgrips on each side at hip height for steering and balance. All three mag wheels are of equal diameter and have pneumatic tires. A safety flag with a mounting bracket and a front fender are included. OPTIONS: Harness and heel support foot straps DIMENSIONS(HxLxW): 31 x 61 x 38 inches. The wheel size is 20 inches in diameter. The seat height from crease to top is 16 inches. The inseam to extended pedal is 41 inches. CAPACITY: 220 pounds. WEIGHT: 39 pounds. COLOR: Yellow seat and black wheels.

22. HEAVY DUTY BATH SEAT WITH PERINEAL CUTOUT (MODEL CQ-1720D)

    Heavy Duty Bath Seat with Perineal Cutout, model CQ-1720D, is a bariatric bath seat designed for use by individuals with mobility disabilities. This bath seat has a perineal cutout and fits the contour of a standard bathtub. The frame tubing has vinyl grips to prevent marring the tub. OPTIONS: Floor stand (model 1721) for use in a shower stall. DIMENSIONS (DxW): The seat is 15.25 x 20 inches. The tub must be at least 22 inches wide, measured inside the tub. CAPACITY: 650 pounds.

23. HEAVY DUTY TUB TRANSFER BENCH (MODELS CQ-1730FL & CQ-1730FR)

    The Heavy Duty Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This seat fits standard bathtubs at least 22 inches wide at the center inside the tub. The seat is made using "tube in a tube" construction for added strength. Vinyl grips on the tubing prevent marring the tub. A short back discourages reclining and is also removable. The seat is available with wall to right (model CQ-1730FR) or wall to left (model CQ-1730FL) configuration. DIMENSIONS (HxW): 23.5 x 44 inches. The outside legs adjust from 18.5 to 20.5 inches to accommodate differences in floor compared to tub bottom heights. CAPACITY: 650 pounds.

24. HEAVY-DUTY TUB BENCH WITH COMMODE CUTOUT (MODEL IG-9670C)

    The Heavy Duty Tub Bench with Commode Cut Out, model IG-9670C, is a bath seat and shower commode designed for use by individuals with mobility disabilities. It features a textured, non-slip seat with commode cut-out, handles, hand-held shower holders, and a shower curtain opening molded into bench. An ergonomically- shaped reversible backrest accommodates right- or left-side transfers. The seat has Microban protection which inhibits the growth of odor- and stain-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 31.25 to 35.75 x 16.25 to 17 x 30.5 to 31 inches. The seat-to-floor height adjusts from 18 to 22.5 inches. The seat is 18 inches long x 33.25 inches wide. CAPACITY: 400 pounds. WEIGHT: 12 pounds. WARRANTY: Lifetime warranty.

25. HIGH-LOW CHAIR

    The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-lined trunk support, shoulder straps, and a hip belt. The segmented design of the seat back permits the trunk support and shoulder straps to be positioned specifically for the child. This chair also features tilt-in-space capability (15, 20, or 25 degrees), a removable abductor, and includes a melamine tray that locks securely in place with a quick-release lever. OPTIONS: Lateral head and trunk support. DIMENSIONS: The seat depth adjusts from 7 to 10 inches and the seat width is 12 inches. The seat back is 22 inches high. On the pedestal base, the chair adjusts from 19 to 24 inches. The floor sitter is 7.5 inches high. The wheels are 2 inches in diameter. The tray is 12 x 18 inches. CAPACITY: 75 pounds. WEIGHT: 46 ponds.

26. INDEPENDENCE ONE HANDLED CLEAR CUP (MODEL 1455)

    The One Handled Clear Cup, model 1455, is a large handle cup with spout designed for use by individuals with grasping disabilities. Made of translucent polypropylene this clear cup is designed to monitor hot and cold liquid intake. The cup is unbreakable and comes with spouted and anti-splash lids. They are microwave and dishwasher safe up to 228 degree Fahrenheit. DEMINSIONS (HxW): 3 x 4.5 inches.

27. INFILA AUTOMATIC NEEDLE THREADER

    The Infila Automatic Needle Threader is a needle threader designed for use by individuals with low vision, fine motor disabilities, or arthritis. Designed for use with needles for wool or standard needles, this device is designed to thread needles automatically. To use, insert the needle, lay the thread in the groove, depress the lever, pull the thread through until the short end appears, and remove the needle. COLOR: Assorted

28. KLICK PENCIL HOLDER (MODEL 6058)

    The Klick Pencil Holder, model 6058, is a pencil or pen holder designed for use with a universal cuff. The device consists of a 2-roller locking mechanism which holds the utensil in place. The desired angle can be set with a screwdriver by bending the metal frame to tilt the pencil back under the palm if needed. A clicking sound indicates that the pencil is in place. The device adjusts to right or left hand and can be used with any utensil holder.

29. LAP BUDDY

    The Lap Buddy is a wheelchair lap tray, positioning pad, and wandering patient system designed for use by individuals with mobility disabilities, balance disabilities, spinal cord injury, and Alzheimer's disease. Made of foam with a vinyl cover notched to fit the wheelchair, this soft laptop cushion fits snugly between the user and the wheelchair frame to facilitate upper body positioning and prevent leaning forward. It has full length armrests, and comes in two thicknesses. DIMENSIONS (HxLxW): 2.5 x 9 x 26 inches, or 4 x 9 x 26 inches. Armrests are 14 to 19 inches apart. COLOR: Blue.

30. LARGE CUP HOLDER WITH ROUND WHEELCHAIR ATTACHMENT

    The Large Cupholder with Round Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for round tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair's metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce to 46-ounce cups. The door closes flat to be only 1 inch thick to avoid problems going through doorways. Other features include a support leg that prevents accidental closure if bumped. Tools and screws are not needed for assembly.

31. LARGE CUPHOLDER WITH SQUARE WHEELCHAIR ATTACHMENT

    The Large Cupholder with Square Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for square tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce to 46-ounce cups. The door closes flat to be only 1 inch thick to avoid problems going through doorways. Other features include a support leg that prevents accidental closure if bumped. Tools and screws are not needed for assembly.

32. LEGLIFTER

    The Leglifter is a leg lifter designed to aid people with lower extremity disabilities to lift their legs from a bedside sitting position onto a bed. The Leglifter has three components - an Airflo compressor, a remote control that connects to the compressor; and a large inflatable pillow that fastens on the right or left side of the bed frame underneath the mattress. The inflatable portion connects to the compressor with an air hose. The user sits on the side of the bed with his or her feet on or near the ground and uses the remote control to inflate the Leglifter. As it inflates, the Leglifter will raise the persons legs. When fully inflated, it extends to vertial so that the user's slide onto the mattress. The inflatable portion of the Leglifter has a fabric cover (included) and it has two straps to secure it to the bed. Features include a telescopic support that prevents the leg lifter from lowering under power in the event of an obstruction. Other features include an automatic sensor that turns the motor off in the event of an obstruction. The compressor rests on the floor adjacent to the bed is covered with a molded contoured casing that conceals machine parts and frame for safety. The Leglifter fits all standard bed heights and can be ordered for either left or right side bed use. It is lightweight and compact and folds flat against the bedside when not in operation. POWER: The Airflo compressor has a rechargable battery with a built-in charger. DIMENSIONS (LxWxD): 49 x 22.5 x 4 inches when inflated; depth is 1 inch when deflated. CAPACITY: 300 pounds. WEIGHT: The inflatable portion weigh 3 pounds. WARRANTY: 2 year warranty.

33. MAGNI-FOCUSER HANDS-FREE BINOCUILAR MAGNIFIER 1.75X

    The Magni-Focuser Hands-Free Binocular Magnifier 1.75x is a binocular headband magnifier designed for use by individuals with low vision. The Magni-Focuser has a working distance of 14 inches, allowing for comfortable hands-free magnification. It has a magnification power of 1.75 times. The lens flips out of the way when not in use, and the forehead portion of the band is cushioned for longwearing comfort. The Magni-focuser can be worn over glasses. COLOR: Gray.

34. PENCO WALKER GLIDES

    The Penco Walker Glides are walker glide tips designed for use by individuals who use walkers. Designed to insert easily into walker tubing, these glides are constructed with a curved front to enable wheeled walkers to move smoothly over a variety of surfaces, thresholds and elevations without snagging or lifting. They are made of a durable polymer resin suitable for both indoor and outdoor usage and can also navigate bumps and ridges without getting entangled, such as crossing cracks in sidewalks or entering a carpeted room in a home. The glides adjust to fit walkers with 1.125-inch or 1-inch aluminum tubing. DIMENSIONS (LxW): 3.50 x 1.50 inches.

35. POSEY ARM SLING (MODEL 7411)

    The Posey Budget Arm Sling, model 7411, is designed to stabilize weak, injured, or paralyzed arms. This envelope-style arm sling fits either the right or left arm and has a closed elbow and a single strap with buckle closure that crosses the shoulder and attaches at the wrist and elbow. SIZES: Small, medium, or large. Other features include an inside thumb loop for additional support. The sling is made of 100-percent cotton and is machine washable. DIMENSIONS (LxW): 14 x 7 (small), 16 x 7 (medium), 18 x 8 (large), or 20 x 9 (extra large). COLOR: Navy blue.

36. POSEY INFANT ELBOW SPLINT (MODEL 4642)

    The Posey Infant Elbow Splint, model 4642, is an elbow restraint designed to prevent children up to 2 years of age from bending his or her elbow to help facilitate medical treatment and promote healing. This machine washable splint wraps around the arm and secures with Velcro hook and loop closure. The splint may also be pinned to clothing to hold it in position. DIMENSIONS: The splint is 4 inches long (10 centimeters).

37. POSEY PEDIATRIC LIMB HOLDER (MODEL 4733 & 4734)

    The Posey Pediatric Limb Holders, models 4733 and 4734, are child limb restraints designed for use with infant patients up to two years of age and pediatrics from two to five years of age. The straps prevent pulling of IV lines or catheters while receiving medical treatment. Made of soft foam, these limb restraints feature double strap ties with Velcro hook and loop closures that facilitate easy adjustment. The straps can be used on either arms or legs. DIMENSIONS (LxW) 5.5 x 1 inch (Infant); 7 x 1.5 inches (Pediatrics). Straps for infants are 26 inches long. Straps for pediatrics are 32 inches long.

38. PVI BARIATRIC MULTIFOLD RAMP (MODELS BAR536, BAR636, BAR736, & BAR836)

    The PVI Bariatric Multifold Ramp, models BAR536, BAR636, BAR736, and BAR836, is a portable ramp designed for use by individuals with mobility disabilities. This ramp separates into two pieces that fold on a center joint hinge. A closure strap locks the ramp panels together, allowing it to be carried like a suitcase. The ramp has an anti-slip high traction surface and durable welded construction. It accomodates wheelchairs and scooters with various wheel configurations. A safety guide indicates if the ramp is on a safe slope. A safety DVD and steel security pins are included. DIMENSIONS (LxW): 60 x 36 inches in use, 32.25 x 17.5 x 11.5 inches folded (BAR536); 72 x 36 inches in use, 38.25 x 17.5 x 11.5 inches folded (BAR636); 84 x 36 inches in use, 44.25 x 17.5 x 11.5 inches folded (BAR736); 96 x 36 inches in use, 50.75 x 17.5 x 11.5 inches folded (BAR836). CAPACITY: 400 pounds single axle; 800 pounds, two axles. WEIGHT: 50 pounds (BAR536); 58 pounds (BAR636); 67 pounds (BAR736); 76 pounds (BAR836). WARRANTY: Limited lifetime warranty.

39. REIZEN II LOW VISION FLOOR LAMP

    The Reizen II Low Vision Floor Lamp is a low vision light designed for use by persons with low vision and upper extremity disabilities. This lamp has a flexible arm and adjustable head that allows the user to focus the light from its energy-efficient bulb in order to reduce glare. It is turned on and off with a palm switch, which is easier for persons with arthritis and other upper extremity disabilities to use. DIMENSIONS: 49 inches tall with the head bent in standard use position.

40. RICKSHAW REHAB EXERCISER (MODEL 3000)

    The Rickshaw Rehab Exerciser, model 3000, is an exercise machine designed for use by individuals who use manual wheelchairs. This machine builds muscle strength by duplicating the arm and shoulder motions needed for wheelchair propulsion, transfer, and pressure relief. It enables users to strengthen specific arm and shoulder muscles by facing forward or backward while seated in the wheelchair, and pumping weighted oars. The machine can be customized for an individual program by using equal weights on both sides or less weight on a weaker side. The machine uses standard disc weights (not included). Its short zigzag oars pivot independently or together, have an adjustable oar grip height, and use little floor space. The machine has all stainless steel construction and fits all manual wheelchairs. Weight capacity per oar is 100 pounds. DIMENSIONS (HxLxW): 28 or 32 x 50 x 30 (inside width) or 36 (outside width) inches. The arm length is 26 inches. CAPACITY: 100 pounds per side. WEIGHT: 37.5 pounds.

41. SAY WHAT

    Say What is a clothing marker designed to fit over the hook of a hanger to identify what clothing is hung there for individuals who are blind or have low vision. This reusable identifier is a strong plastic tab with a circular looped end. It comes with tape to make 20 - 3 inch long labels with a braille labeler (not included). The tape can be peeled off and the tag used again. Each kit comes with 10 tags. OPTIONS: Set of 3 kits. DIMENSIONS: Tags are 1.5 x 5.75 inches. The opening is 7/8 inches in diameter. The tape is 0.5 inch wide.

42. SLIDING POCKET MAGNIFIER

    The Sliding Pocket Magnifier is a folding pocket magnifier designed for use by individuals with low vision. Its magnifying lens offers 5 times magnification. The case is split into two sections and slides apart to reveal the lens. When closed, the case conceals the lens and protects it from scratches when taken in and out of pockets. DIMENSIONS: The magnifying lens is 1.25 inches in diameter. COLOR: The case is available in blue, black, yellow, white and orange.

43. SPEECH-TEACH PORTABLE MIRROR (MODEL 3463)

    The Speech-Teach Portable Mirror, model 3463, is a non-glass, shatterproof speech mirror designed to allow the person with a speech disabilityview himself and the therapist simultaneously during therapy. The mirror is self-contained in a vinyl cover that folds back to form an angled stand. DIMENSIONS: 12 x 16 inches.

44. TALKING PYRAMID ALARM CLOCK

    The Talking Pyramid Alarm Clock is a voice output alarm clock designed for use by individuals who are blind or have low vision. This pyramid-shaped clock features a liquid crystal display (LCD), voice announcement of the time at the press of a button on the top of the clock and an alarm that crows or emits a loud sound. The hours and minutes are spoken during the setting process. POWER: Uses four double-A batteries (not included). WARRANTY: 90 days.

45. THERATOGS ULTRA POSTURE AND TORSO ALIGNMENT SYSTEM (MODELS GPTA110, GPTA210, GPTA310 & GPTA410)

    The TheraTogs ULTRA Posture and Torso Alignment (PTA) System, models GPTA110, GPTA210, GPTA310 and GPTA410, is a kyphosis, low back and spinal orthosis, shoulder brace, and pressure garment and designed for use by children and adults of short stature with sensory integration, emotional, or neurological disabilities, posture issues, scapular and shoulder misalignments, and autism. The Full Body System is made with GoldTone material that has stretch, tension and rebound properties specifically formulated for the demands of biomechanical retraining and support. The garment wraps the torso and upper portions of the legs to provide proprioceptive input for calming and self-regulation. It can also be used to improve postural alignment and stability, shoulder retraction and scapular stabilization. The system’s fit can be adjusted with Velcro straps. SIZES: Infant; preschool; pediatric; petite adult.

46. TITAN 600 LIFT

    The Titan 600 Lift is a pool and hot tub lift designed for use by individuals with spinal cord injury or lower extremity, mobility or severe physical disabilities. This lift is constructed of stainless steel with epoxy powder coating, and it is designed to accommodate heavier individuals. The Titan can be used for in ground and partially raised pools and spas. The Titan 600 can clear walls up to 36 inches high and can be set between 12 and 44 inches from a pool edge. It has a hard seat with a backrest, dual flip-up arms, adjustable lap belt, and removable and adjustable foot rest. OPTIONS: Options include a cover, chest strap, headrest, anchor system, cycle attachment, transport cart, and upgrade package. POWER: Uses a 24-volt sealed rechargeable battery; a wall-mounted charging unit with mounting bracket is included. DIMENSIONS (HxLxW): 70 x 48 x 42 inches. CAPACITY: 600 pounds. WEIGHT: 370 pounds. WARRANTY: 5 year pro-rated electronics warranty; limited lifetime structural warranty.

47. TOREX HOT AND COLD SLEEVE (MODEL R4060, R5060, R6060, & R7080)

    The Torex Hot and Cold Sleeve, model R4060, R5060, R6060, and R7080, is a hot and cold compression wrap designed to reduce upper or lower extremity muscle pain. The outer polyurethan sleeve contains a gel pack that can be heated in a microwave (using the defrost setting) or cooled in a refrigerator or freezer. The hot and cold sleeve comes with one stretchable non-latex ICS 35 insulating compression sleeve and application instructions. SIZES: Small (fits limbs 4 to 10 inches in circumference), medium (fits limbs 10 to 15 inches in circumference), large (fits limbs 15 to 21 inches in circumference), or extra large (fits limbs 21 to 28 inches in circumference). DIMENSIONS: Small sleeve is 6 inches long with a 4 inch center opening, and comes with a 12 inch long compression sleeve with a 3.5 inch center opening. Medium sleeve is 6 inches long with a 5 inch center opening, and comes with a 14 inch long compression sleeve with a 4.75 inch center opening. Large sleeve is 6 inches long with a 6 inch center opening, and comes with a 14 inch long compression sleeve with a 4.75 inch center opening. Extra large sleeve is 8 inches long with a 7 inch center opening, and comes with a 14 inch long compression sleeve with a 4.75 inch center opening. WEIGHT: 20 ounces (small), 28 ounces (medium), 32 ounces (large), 48 ounches (extra large). COLOR: Hot/cold sleeve is blue and the inner compression sleeve is white.

48. TORNADO RAIN GUARD CRUTCH TIPS (MODEL T18)

    The Tornado Rain Guard Crutch Tips, model T18, are crutch tips designed for use by individuals with mobility and walking disabilities. These crutch tips are designed to lessen impact and increase grip, even at an angled approach. The tips feature a shock absorbing polymer gel and a new rain tip bonded over the tread that increases resistance to slipping on wet surfaces. These tips fit all crutches with a lower tube diameter of .75 to 1 inch. DIMENSIONS: Base of tips is 2 inches in diameter. WEIGHT: 0.9 pounds. WARRANTY: Limited warranty.

49. TOUCH-DOTS

    Touch Dots are tactile markers designed to identify objects for individuals who are blind or have low vision. The adhesive-backed sponge dots can be used to identify locations on flat panels, dials, or control knobs. They can be applied to canned goods, telephones, tape recorders, keyboards, and calculators. These dots come in sheets of 64. DIMENSIONS: 0.25-inch diameter. COLORS: White, orange, yellow, red, or black.

50. TUB TRANSFER BENCH WITH PERINEAL CUTOUT (MODEL CQ-1730L)

    Tub Transfer Bench with Perineal Cutout is a bariatric bathtub transfere bench designed for use by individuals with mobility disabilities. This bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench has "Tube in a Tube" construction for added strength. The tubing has vinyl grips to prevent marring the tub. A short back discourages reclining and is removable. The bench is available in a wall to left (model CQ-1730L) or wall to right (model CQ-1730R) configuration. DIMENSIONS (HxLxW): 23.5 (back to floor) x 16.5 x 44 inches. Perineal openings are 10 inches long x 8 inches wide. The outside legs adjust from 18.5 to 20.5 inches to accommodate differences between tub and floor heights. CAPACITY: 650 pounds. WEIGHT: 25 pounds.

51. VALUELINE MAT PLATFORM (MODELS 2230A, 2230B & 2230C)

    The Valueline Mat Platform, model, 2230A, model 2230B & model 2230C, are mat tables designed to provide a therapy and exercise surface above floor level, providing access to wheelchair users, ambulatory users, and patient lifts. The solid wood platform includes a permanently attached covered foam mat. DIMENSIONS (W x L): Model 2230A is 4 x 7 feet; model 2230B is 5 x 7 feet; and model 2230C is 6 x 8 feet. The mat is 2 inches thick and the platform has 20-inch clearance. CAPACITY: 450 pounds. WARRANTY: 18-month warranty.

52. VALUELINE YOUTH/ADULT STANDING TABLE (MODEL 4513D)

    The ValueLine Youth/Adult Standing Table, model 4513D, is a standing table designed for use by children and adults from 4 feet 6 inches to 5 feet 4 inches with lower extremity disabilities. Designed to provide a table top surface for work or play in a standing position, this standing table has a wide base platform for added stability and to support weight-bearing parts of the body. Other features include an enclosed standing box with a door, cut-out, styrene covered top, and height adjustable footboard. DIMENSIONS: The top measures 30 x 30 inches. The tray-height from floor is 41.5 inches. The foot platform adjusts from 1.5 to 12 inches from the floor, and the cut-out measures 12 x 15 inches. CAPACITY: 250 pounds.

53. WAVE DRUM (MODEL 924824)

    The Wave Drum, model 924824, is a hand eye coordination activity designed for use by children three years old and older with physical, cognitive, neurological, and visual disabilities. This see-through drum features a shatterproof plastic base with tiny beads inside and a drumstick. A plastic side clip is also included to hold the drumstick when it is not in use. When the drum is struck, the beads move, creating interesting sounds. If the drum is moved from side to side, the beads produce the soothing sound of ocean waves. All of the materials used to make this toy are latex free. DIMENSIONS: The surface of the drum is 10-inches in diameter, and the drumstick is 7.5 inches long. COLOR: The drum has a clear face and a red and yellow base. The drumstick is dark blue, and the drumstick side clip is bright yellow. The beads inside the drum are multi-colored.

See RehabMart, LLC products that are no longer available.