Specialty Medical Supply

5991 Meijer Drive, Suite 23
Milford, Ohio 45150
United States
Telephone: 800-380-8539 or 513-576-9500.
Fax: 513-576-1301.
Web: http://www.specialtymedicalsupply.com.
Email: info@specialtymedicalsupply.com.

Products distributed by Specialty Medical Supply (listed alphabetically)

1. ADJUSTABLE COMPOSITE BATH & SHOWER SEAT

   The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPACITY: 300 pounds. COLOR: White.

2. ADJUSTABLE TRANSFER BENCH

   The Adjustable Transfer Bench is designed for use by individuals with lower extremity, mobility, or balance disabilities. This molded plastic bench adjusts for right- or left-hand tub or shower entry and features height-adjustable legs with suction feet, a removable chair-style back with hand hole, a removable arm, and a built-in handshower holder. DIMENSIONS: The height adjusts from 16 to 21 inches in one-inch increments and the overall width is 30 inches. CAPACITY: 350 pounds. COLOR: White.

3. BARIATRIC SHOWER COMMODE CHAIR (MODEL 130-5)

   The Bariatric Shower Commode Chair, model 130-5, is a shower chair and commode with casters designed for use by individuals with balance or mobility disabilities. The frame is made of PVC plastic with a commode seat, armrests, and six threaded stem casters. DIMENSIONS (HxLxW): Frame is 43 x 28 x 34 inches. The seat is 21 x 23 x 30 inches. The casters are 5 inches in diameter x 1.25 inches wide. CAPACITY: 700 pounds. COLOR: Frame is white.

4. BATH BENCH WITHOUT BACK & HEAVY DUTY BATH BENCH

   The Bath Bench without Back and the Heavy Duty Bath Bench are shower benches designed for use by individuals with mobility disabilities. Both models are height-adjustable and have molded, composite contoured seats with a textured finish and hand holds, and aluminum frames with suction feet. The Heavy Duty Bath Bench also has a molded, contoured back with a textured finish and drainage holes. DIMENSIONS: The height adjusts on both models from 14 to 18 inches. CAPACITY: The backless bench has a 300-pound capacity and the heavy-duty model has a 700-pound capacity. COLOR: The seat and back are white.

5. BATH BOARD

   The Bath Board is a bathboard designed for use by individuals with mobility disabilities. This molded, contoured bathboard has a textured, non-slip surface and clamps to the edges of most standard tubs. An easy-to-use adjustment knob keeps the board secure. DIMENSIONS: Fits most standard tubs betwen 23.25 and 26.5 inches from edge to edge. The seating area is 31 inches wide x 15 inches deep. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Limited Lifetime warranty.

6. BATH BOARD (MODEL 09200)

   The Bath Board is a bathboard designed for use by individuals with balance disabilities or lower extremity disabilities who require support while bathing. The Bath Board attaches securely to most bathtubs. The board is equipped with rubber-covered clamps to secure it to the tub and they resist slipping and protect surfaces from scratching. It has a built in soap holder. OPTIONS: Safety handle sold separately. DIMENSIONS: The width adjusts from 17.75 inches to 28 inches. CAPACITY: 250 pounds. COLOR: White.

7. BATHCHAIR TRANSFER SYSTEM

   The Bathchair Transfer System is a wheelchair shower commode designed for use by individuals with mobility disabilities. The system comprises a caster shower chair and tub frame rails that interlock with the chair and enable the chair to be removed from the wheeled base and slide into the tub. After bathing, the process is reversed. The chair can also be positioned over a toilet for use as a commode chair. The chair features a tubular plastic frame, a mesh back support, a commode-style seat, caster-stle wheels, and a footrest platform. DIMENSIONS: The seat is 18 inches wide x 18 inches deep and the chair is 22 inches wide overall. The tub frame 31 inches wide. CAPACITY: 300 pounds.

8. BATHTUB TRANSFER BENCH (MODEL 4375)

   Adjustable height bathtub transfer bench with rail backrest. 1 inch anodized aluminum tubing, cross brace tubing supports fiberglass seat. Rubber leg tips. Adjustable seat height 14 1/2 to 18 1/2 inches, width 29 1/2 inches, depth 18 inches, weight 7 1/2 pounds. Extension legs available for height adjustments from 19 1/2 to 23 1/2 inches.

9. BREEZY 2

   The Breezy 2 is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of forest green, silver texture, or blue finishes. Anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon the wheels and casters selected. The backrest adjusts from 16 to 19 inches and includes push handles. CUSHION: A 2-inch cushion is optional. UPHOLSTERY: Padded sling upholstery is standard; a non-padded sling is available. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-push or high-pull Breezy wheel locks are included. High-push or high-pull Quickie wheel locks, brake extension handles, and grade aids are optional. CASTERS: 8-inch polyurethane casters are standard and 5-inch polyurethane casters are available at no charge. 8-inch pneumatic casters are optional. WHEELS: 22- or 24-inch mag wheels are standard. 20-inch wheels are available at an extra charge. Low-profile polyurethane tires are standard. Full-profile polyurethane, pneumatic, or pneumatic tires with airless inserts are optional. Composite handrims are standard. Aluminum or plastic-coated handrims and projections are optional. FOOTRESTS: 60- or 70-degree swing-away footrests with composite footplates and heel loops are standard. Elevating or articulating legrests are optional. OPTIONS: Backpack, seat pouch, spoke guards, touch-up paint, positioning belts, and others. WEIGHT: 28 pounds, not including footrests. CAPACITY: 250 pounds. WARRANTY: Lifetime frame guarantee.

10. CAREGUARD BY INVACARE TRANSFER BENCH

    The CareGuard by Invacare Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The back and the three-section seat are blow molded and the seat has a non-slip textured seat with drain holes. OPTIONS: Leg pieces with suction cups are available. DIMENSIONS: The frame tubing is one-inch in diameter. The seat is 23 inches wide x 16 inches deep. The seat height adjusts from 17.5 to 22 inches. The overall height ranges from 28.5 to 33 inches. WEIGHT: 13 pounds. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Limited lifetime warranty.

11. CAREX CANVAS WALKER BASKET

    The Carex Canvas Walker Basket is a carrying bag designed for use by individuals who carry items when using a walker. The bag attaches to the walker with elastic straps to hold items upright. Other features include a large space for personal items, collapsible hinges for travel and flat storage, and a privacy cover that keeps personal items protected and concealed. This bag fits most walkers. DIMENSIONS (HxDxW): 7.75 x 6 x 16.5 inches. WEIGHT: 0.5 pounds.

12. CARRYING BASKET (MODEL 7715)

    Large vinyl coated wire basket attaches with hooks to the top of the walker frame. Easy to remove or install.

13. CARRYING POUCH (MODEL 7719)

    Zippered carrying pouch attaches to the top of the walker frame with velcro straps. Three side pockets and a large central storage area. Washable fabric.

14. DELUXE ADJUSTABLE BATH BENCH WITH RED SAFETY HANDLE (MODELS 9100 & 9120)

    The Deluxe Adjustable Bath Bench With Red Handle is a bath seat designed for use by individuals with mobility, balance, and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a contoured back which slides into seat, the bench has a hard plastic seat and back with multiple drainage holes. The safety handle provides support and balance assistance when entering and exiting the tub. The handle can be attached to eaither side and additional handles can be added. The legs have non-skid rubber tips. DIMENSIONS (HxDxW): 15 inches to 21 x 16 x 20 inches. CAPACITY: Weight capacity is 300 pounds. COLOR: The safety handle is red for visibility.

15. DELUXE PADDED BATHTUB TRANSFER BENCH WITH FULL SEAT

    The Deluxe Padded Bathtub Transfer Bench with Full Seat is a transfer bench designed for use by individuals with mobility and balance disabilities. The height-adjustable padded vinyl seat resists tearing. The seat is equipped with a side rail to provide support during transfers. DIMENSIONS (HxDxW): 31 x 22 x 29 inches to top of back. The height adjusts from 18 to 22 inches in 0.75-inch increments. CAPACITY: 300 pounds. WEIGHT: 13 pounds, 4 ounces. COLOR: White.

16. DELUXE TRANSFER BENCH WITH BACK (MODEL 9070)

    The Deluxe Transfer Bench with Back, model 9070, is designed for use by individuals with mobility disabilities, balance disabilities and cognitive disabilities who have difficulty standing in a tub or shower. The bench extends over the side of the tub, allowing the individual to sit and slide into the tub without having to step over the side. The bench has an anodized aluminum frame with a hard plastic seat and back. It adjusts to left- or right-side tub entry by placing the back on either side. The bench is equipped with a handle to aid in transfers. DIMENSIONS: The height adjusts from 32 to 36 inches. CAPACITY: Weight capacity is 300 pounds.

17. ECONOMY TUB TRANSFER BENCH (MODEL 6364)

    Adjustable height bathtub transfer bench. Molded plastic. Wrap-around aluminum tubing back with arm rest for left or right side installation. Channel edge and drain holes direct water into tub. Aluminum frame with flared legs. Adjustable height from 15 1/2 to 20 inches in 1/2 inch increments. Overall length 28 inches. Overall width 16 inches. Seat to back height 11 inches. Weight 6 pounds.

18. ENSOLITE PADDED TRANSFER BENCH

    The Ensolite Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The back and seat are padded with closed-cell, water repellent Ensolite foam for a seamless, cushioned seating surface. OPTIONS: A commode seat with container and leg pieces with suction cups are available. DIMENSIONS: The frame tubing is one-inch in diameter. The foam is 1-inch thick. The seat is 23 inches wide x 16 inches deep. The seat height adjusts from 17.5 to 22 inches. The overall height ranges from 28.5 to 33 inches. WEIGHT: 13 pounds. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Limited lifetime warranty.

19. EZ-SHAMPOO BASIN

    EZ-SHAMPOO is an inflatable shampoo basin for washing the hair of individuals with mobility disabilities or who must remain in bed. The basin can be inflated by mouth or using an air pump (not included). The heavy-duty vinyl basin supports the neck and shoulders and includes a drain hose. Instructions are included. DIMENSIONS (LxWxD): 20 x 24 x 8 inches. WARRANTY: 1-year warranty.

20. FOLDABLE TRANSFER BENCH

    The Foldable Transfer Bench is designed for use by individuals with mobility or balance disabilities. This bench has a non-slip molded contoured seat and a lightweight aluminum frame with a single side handle. The height-adjustable unit has wide set legs with suction tips for added stability. The backrest adjusts for use in right- or left-facing tubs. The bench folds for transport and storage. OPTIONS: A tote bag is available. WEIGHT: 5.5 pounds.

21. FOLDING SHOWER CHAIR WITH BACK

    The Folding Shower Chair with Back is a shower stool designed for use by individuals with mobility disabilities. This molded chair has a wide contoured seat and folding back with drainage holes, molded hand-held shower holders, a folding aluminum frame, and non-marring rubber tips. DIMENSIONS (HxWxD): The seat is 17.5 x 19.75 x 17 inches. The back height is 12 inches high from the seat. Folded, the unit is 25.5 inches long x 19.75 inches wide x 7.5 inches deep. CAPACITY: 250 pounds. WEIGHT: 6.5 pounds. COLOR: The seat and back are white. WARRANTY: Limited lifetime warranty.

22. FRONT MOUNT WALKER CARRYON (MODEL EZ0040)

    The Front Mount Walker Carryon, model EZ0040, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weather-resistant nylon, this pack attaches to the front of a walker using dual-strap attachment anchors that fasten to the front of the walker’s frame. Features include a detachable beverage holder, a large storage compartment and three deep pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIONS (DxLxW): 1 x 18.5 x 17.5 inches. COLOR: Black. WARRANTY: 1-year limited warranty.

23. GUARDIAN ADJUSTABLE-HEIGHT TUB TRANSFER SEAT

    The Guardian Adjustable-Height Tub Transfer Seat ia a transfer bench designed for use by persons with physical disabilities who use wheelchairs. The bench allows individuals to slide from a wheelchair into the tub. This bench features a rust-resistant anodized aluminum frame, aluminum side and backrest handles to aid transfers, suction feet, and a vinyl-covered padded seat and backrest. DIMENSIONS: The seat height adjusts from 16 to 21 inches. The seat measures 28 inches wide x 18 inches deep. CAPACITY: 250 pounds. WEIGHT: 14 pounds. WARRANTY: Included.

24. GUARDIAN EASY CARE 1000 WHEELCHAIR

    The Guardian Easy Care 1000 Wheelchair is a manual wheelchair designed for use by individuals with walking disabilities and mobility disabilities. FRAME: Chrome-plated, carbon steel frame. SEAT: Choice of seat widths of 16 inches and 18 inches. UPHOLSTERY: Vinyl upholstery is flame retardant. ARMRESTS: Fixed full length armrests. WHEELS: Composite mag wheels are molded with contours. Sealed bearings are maintenance free. FOOTRESTS: Fixed footrests.

25. GUARDIAN EASY CARE 2000 WHEELCHAIR

    The Guardian Easy Care 2000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. It is equipped with a dual axle which allows the seat to be lowered to hemi height. There is a full sized chart pocket on the backrest. FRAME: The frame is chrome-plated, carbon steel with front rigging mounts. SEAT: The seat widths are 16 or 18 inches. ARMRESTS: A choice of padded removable desk-length or fixed full-length armrests is offered. WHEELS: Composite mag wheels are molded with contours. FOOTRESTS: A choice of swingaway footrests, elevating legrests, or fixed footrests is available.

26. GUARDIAN ECONOMY NON PADDED TRANSFER BENCH (MODEL 98309)

    The Guardian Economy Non-Padded Transfer Bench, model 98309, is a bath transfer bench designed for use by individuals with mobility disabilities. This bench has a textured, molded plastic backrest and seat. The non-slip seating surface has holes for water drainage. The frame is made of lightweight, anodized aluminum and is height adjustable in 1/2-inch increments. The backrest adjusts without tools for right or left facing tubs. A side arm and seat handle provide extra stability and leverage when transferring. Suction cup footpieces secure the bench to tub floor. The bench also features a built-in soap dish and a slot for a hand-held shower. DIMENSIONS (LxW): Overall, 21 x 31.5 inches; seat, 14.5 x 31.5 inches. Floor to seat height adjusts from 16.5 to 21.5 inches. CAPACITY: 300 pounds. WEIGHT: 12 pounds.

27. HYGIENIC ADJUSTABLE BATH BENCHES (MODELS 9050 & 9060)

    The Hygienic Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance,and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a backrest, the benches have a horseshoe design for hygiene purposes. The hard plastic seat and back have multiple drainage holes and the legs are equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches x 12 inches x 16 inches. CAPACITY: Weight capacity is 300 pounds.

28. INVACARE 9000 SL

    The Invacare 9000 SL is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The standard frame color is chrome; options include deep purple, black, or silver vein. SEAT: The seat is available in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16; 18 inches is optional. The standard seat-to-floor height is available in 17.5, 18.5, or 19.5 inches; 15.5 or 16.5 inches can be achieved with alternate wheel and caster packages. The back height adjusts from 15 to 17 inches in one-inch increments or from 17 to 19 inches in one-inch increments. UPHOLSTERY: Flame-retardant padded nylon upholstery with heavy-duty liners. Black is standard; ruby and hunter green are optional. ARMRESTS: Available styles include full- or desk-length, fixed height, padded flip-back armrests and full- and desk-length height-adjustable, padded flip-back armrests. The armrests are available in space saver configurations. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires are standard. WHEELS: No flex molded rear wheels with handrims, triple-position axles, and urethane tires are standard. FOOTRESTS: Hemi swing-away footrests, hemi swing-away padded elevating legrests, or articulating elevating legrests. The footplates are available in aluminum or composite. Extra-large footplates are also available. CAPACITY: 250 pounds. WEIGHT: Less than 34 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

29. INVACARE 9000 XDT

    The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is available in 16, 17, 18, 19, or 20 inches. The standard seat-to-floor height is available in 17.5, 18.5, or 19.5 inches; 21.5 inches can be achieved with alternate wheel and caster packages. The back height adjusts from 15 to 19 inches in one-inch increments. UPHOLSTERY: Flame-retardant padded upholstery with heavy-duty liners. Black nylon is standard; options include black, dark blue, camel vinyl, as well as black sail cloth or hunter green or ruby nylon. ARMRESTS: Available styles include full- or desk-length, fixed height, padded flip-back armrests and full- and desk-length height-adjustable, padded flip-back armrests. The armrests are available in conventional or space saver configurations. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires are standard. WHEELS: No flex molded rear wheels with handrims, triple-position axles, and urethane tires are standard. FOOTRESTS: Hemi or super hemi swing-away footrests, hemi or super hemi swing-away padded elevating legrests, or articulating elevating legrests. The footplates are available in aluminum or composite. CAPACITY: 350 pounds. WEIGHT: Less than 38 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

30. INVACARE TRACER EX

    The Invacare Tracer EX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant dual-embossed vinyl upholstery in midnight blue or ruby with heavy-duty liners. ARMRESTS: Available styles include full- or desk-length, fixed height, padded removable armrests and fixed, non-removable armrests. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires. WHEELS: No flex molded rear wheels with composite soft-touch handrims and urethane tires. FOOTRESTS: Swing- away footrests, swing-away padded elevating legrests, or swing-away elevating legrests. The footplates are available in aluminum or composite. CAPACITY: 250 pounds. WEIGHT: 44 pounds. WARRANTY: Five years.

31. INVACARE TRACER IV

    The Invacare Tracer IV is a heavy-duty manual adult wheelchair designed for use by heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with dual crossbraces. The reinforced frame includes gussetted side frame and caster journals. Push handles are standard. SEAT: Sling seat in a choice of 20, 22, or 24 inches wide. The seat depth is 18 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant dual-embossed vinyl upholstery in with heavy-duty liners. Midnight blue is standard; options include marina blue, space blue, dove grey, camel, or ruby. ARMRESTS: Available styles include full- or desk-length, fixed height, padded removable armrests and full- or desk-length, adjustable-height, padded removable armrests. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires are standard heavy-duty composite caster wheels with semi-pneumatic are available on the extended weight package. WHEELS: No flex molded rear wheels with handrims and urethane tires. Composite wheels with pneumatic tires and flat-free inserts are available with the extended weight package. FOOTRESTS: Swing-away footrests, swing-away padded elevating legrests, or articulating elevating legrests. The footplates are aluminum. CAPACITY: 350 or 450 pounds. WEIGHT: 51 pounds. WARRANTY: Five years.

32. INVACARE TRACER SX

    The Invacare Tracer SX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. The frame is available in standard adult and hemi models. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, 20, or 22 inches wide. The standard seat depth is 16 inches; an 18-inch depth is available. The seat-to-floor height is available from 15.5 to 19.5 inches in one inch increments; 17.5 to 19.5 inches is standard and the 15.5- and 16.5-inch heights are achieved with alternate wheel and caster packages. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant dual-embossed vinyl upholstery with heavy-duty liners. Midnight blue is standard; black, dove grey, dark blue, ruby, camel, or space blue are available. Black nylon is also available. ARMRESTS: Available styles include full- or desk-length, fixed height, padded flip-back armrests and full- or desk-length adjustable-height, padded flip-back armrests. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires. WHEELS: No flex molded rear wheels with handrims, urethane tires, and dual-position axle. FOOTRESTS: Hemi swing-away footrests, hemi swing-away padded elevating legrests, or articulating elevating legrests. The footplates are available in aluminum or composite. CAPACITY: 250 pounds. WEIGHT: Less than 36 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

33. LONG HANDLED BATH SPONGE

    The Long Handled Bath Sponge is designed for use by individuals who have upper extremity disabilities or who have difficulty bending. This sponge has a large round head and a long plastic handle with a hole for hanging. The handle may be heated and bent for easier grasping. DIMENSIONS: 18 inches long.

34. MARINER

    The Mariner is a wheelchair shower commode designed for use by individuals with severe physical, lower extremity, or mobility disabilities or spinal cord injury. This commode comes standard with a commode pan and holder with safety strap. FRAME: The lightweight, folding aluminum frame with stainless steel hardware fits over most elongated toilets and can be used in the shower. Push handles are standard. This chair is 26.5 inches wide open and 12 inches wide folded. SEAT (WxDxH): The standard four-position padded commode seat is 18.25 x 18.25 x 22.75 inches. A 16-inch wide seat is available. The seat back is 18 inches high. ARMRESTS: Flip-up padded arms that lock down. BRAKES: Wheel locks. CASTERS: Available with four five-inch casters or two five-inch front casters. WHEELS: Two 23-inch rear wheels with treaded tires and handrims on models with two front casters. FOOTRESTS: Swing-away footrests are height adjustable without tools. CAPACITY 300 pounds. WEIGHT: The standard model weighs 41 ponds. The model with the 16-inch seat weighs 39 pounds. The model with four casters weighs 32 pounds. WARRANTY: Three-year limited warranty.

35. METAL REACHERS

    The Metal Reachers are reachers designed for use by individuals with upper extremity or mobility disabilities. These reachers help users grasp items from hard-to-reach places, both above and below the user. The trigger handle pulls the jaw tight and the magnet at the end helps lift small metal objects. The reachers are available in a fixed model and a folding model. DIMENSIONS: The fixed models are available in 32 or 27 inches long. The folding reacher is 26.5 inches long.

36. MJM SHOWER CHAIR (MODEL 118-3-A)

    The MJM Shower chair, model 118-3-A, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. FRAME (HxWxD): 40 x 22 x 18 inches. The frame is made of PVC plastic. SEAT: Deluxe elongated open front seat with padded elevated leg extension. The seat height is 21 inches. UPHOLSTERY: Water resistant vinyl mesh cover on backrest. CASTERS: 3-inch threaded stem casters. CAPACITY: 300 pounds.

37. MJM BARIATRIC RECLINING SHOWER CHAIR (MODEL 196-26-BAR)

    MJM Bariatric Reclining Shower Chair, model 196-26-BAR, is a bariatric caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. The chair has a PVC plastic frame and features a full-support commode seat, an elevating legrest and sliding footrest, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 50 x 30 x 21 inches in overall size. The seat is 22 inches high and the reclined back is 27 inches. The casters are 3 x 1.25 inches. CAPACITY: 600 pounds. COLOR: White frame.

38. MJM BARIATRIC SHOWER CHAIR (MODEL 131-5)

    The MJM Shower Chair, model 131-5, is a bariatric caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, a solid seat with commode cutout, a self-storing footrest, and six threaded-stem casters, four of which lock. The backrest is covered with water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat height is 21 inches and depth is 23 inches. The casters are 5 x 1.25 inches. CAPACITY: 700 pounds.

39. MJM BARIATRIC SHOWER CHAIR (MODEL 131-5-SSDE)

    The MJM Bariatric Shower Chair, model 131-5-SSDE, is a bariatric shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, armress, a push handle, and an open-front commode seat. The backrest is covered in water resistant-vinyl mesh upholstery. The chair is also equipped with six threaded-stem casters, four locking. OPTIONS: Soft seat. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat is 21 inches high x 23 inches deep. The casters are 5 x 1.25 inches. CAPACITY: 700 pounds.

40. MJM DELUXE HOWER CHAIR (MODEL 118-3-FF)

    The MJM Deluxe Shower Chair, model 118-3-FF, is a wheelchair shower commode designed for use by individuals with balance, mobility, or neurological disabilities or spinal cord injury. Th is chair has a coated PVC plastic frame, with a commode seat, folding footrest, a backrest of water-resistant vinyl mesh upholstery, and four threaded stem casters. DIMENSIONS (HxWxD): 40 x 22 x 18 inches. The internal width is 18 inches. The seat height is 21 inches. The sasters are 3 x 1.25 inches. CAPACITY: 300 pounds. COLOR: White frame.

41. MJM DELUXE SHOWER CHAIR (MODEL 118-3-SF)

    The MJM Deluxe Shower chair, model 118-3-SF, is designed for use by individuals with mobility, balance, or neurological disabilities. This model features a PVC plastic frame, an open-front plastic toilet seat, and a backrest covered in water-resistant vinyl mesh upholstery. This chair is equipped with four threaded-stem casters. OPTIONS: Bed pan. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

42. MJM RECLINING SHOWER CHAIR (MODEL 193)

    The MJM Shower Chair, model 193, is a reclining shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with armrests and push bar, and is equipped with an elongated open front commode seat, an elevating leg extension, and four threaded-stem casters. The backrest and leg extension are covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches and reclining seatback is 29 inches. The csters are 3 x 1.25 inches. CAPACITY: 325 pounds.

43. MJM RECLINING SHOWER CHAIR (MODEL 193-PED)

    The MJM Shower Chair, model 193-PED, is a casterc shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair is compact in size to accommodate children or small adults. The chair has a PVC plastic frame with armrests and a push bar. The chair is equipped with an elevating leg rest, reclining back, and four threaded-stem casters. The backrest and footrest are covered with water-resistant vinyl upholstery. DIMENSIONS(HxWxD): 44 x 20 x 15 inches. The reclined back is 27 inches. The seat height is 18 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

44. MJM RECLINING SHOWER CHAIR (MODEL 194)

    MJM Reclining Shower Chair, model 194, is a reclining caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with armrests and push bar. This chair is equipped with an elongated open front commode seat, a reclining back, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches. The reclined back is 29 inches. The casters are 3 x 1.25 inches. CAPACITY: 325 pounds.

45. MJM RECLINING SHOWER CHAIR (MODEL 196)

    The MJM Reclining Shower Chair, model 196, is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame with arm rests and a push bar and is equipped with a padded, elevated legrest, sliding footrest, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches and the reclined back is 29 inches. The casters are 3 x 1.25 inches. CAPACITY: 325 pounds.

46. MJM SHOWER CHAIR ( MODEL 115-3TW-RH)

    The MJM Shower chair, model 115-3TW-RH, is pediatric or small adult shower chair designed for use by individuals with mobility, lower extremity, or neurological disabilities. This commode chair has a PVC plastic frame, a closed front commode seat with a reducer ring to accommodate children 18 to 36 months of age, and threaded-stem twin casters with plastic wheels. The backrest is covered with water resistant vinyl-mesh upholstery. DIMENSIONS(HxWxD): 36 x 19 x 16 inches. The casters are 3 inches in diameter. CAPACITY: 250 pounds.

47. MJM SHOWER CHAIR (MODEL 116-3-FD)

    The MJM Shower chair, model 116-3-FD, is a caster shower chair designed for use by individuals with mobility, neurological, or balance disabilities. This chair has a PVC plastic frame that folds for transport or storage. The chair features a closed-front commode seat, a backrest covered in water-resistent vinyl mesh upholstery, and four threaded-stem casters. DIMENSIONS (HxWxD): 37 x 20 x 19 inches. Folded, the chair is 37 inches long x 5 inches wide. The height of the seat is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

48. MJM SHOWER CHAIR (MODEL 118-3-A)

    The MJM Shower chair, model 118-3-A, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. This chair features a PVC plastic frame; a padded, elevated leg extension; an elongated, open-front toilet seat; and four threaded-stem casters. The backrest has water- resistent vinyl cloth upholstery. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The leg extension is 15 inches. The casters are 3 inches in diameter. CAPACITY: 300 pounds.

49. MJM SHOWER CHAIR (MODEL 118-3-ADJ)

    The MJM Shower chair, model 118-3-ADJ, is a height adjustable shower chair designed for use by individuals with mobility, balance, or neurological disabilities. This chair has a height-adjustable PVC frame, an open-front plastic commode seat, and four threaded-stem casters. The backrest is covered with water- resistant vinyl upholstery. DIMENSIONS(HxWxD): 40 to 45 x 22 x 18 inches. The height adjusts in one-inch increments. The casters are 3 x 1.25 inches. CAPACITY: 250 pounds.

50. MJM SHOWER CHAIR (MODEL 118-3-ADJ)

    The MJM Shower chair, model 118-3-ADJ, is a height-adjustable shower chair designed for use by individuals with mobility, balance and neurological disabilities. The backrest is covered in water-resistent vinyl mesh. DIMENSIONS(HxWxD): 40 x 45 x 22 inches. The seat height adjusts from 20 to 25 inches. The casters are 3 inches in diameter. CAPACITY: 250 pounds.

51. MJM SHOWER CHAIR (MODEL 118-3-AF)

    The MJM Shower chair, model 118-3-AF, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. The chair, made from PVC plastic, has drain holes and a flat stock seat that fully supports the buttocks. The backrest is covered in water- resistant vinyl mesh upholstery. A padded elevated leg extension is standard. The chair is equipped with four threaded-stem casters. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The leg extension is 15 inches long. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

52. MJM SHOWER CHAIR (MODEL 118-3-FD)

    The MJM Shower chair, model 118-3-FD,is designed for use by individuals with mobility and neurological disabilities. This chair features a PVC plastic frame, four threaded-stem casters, and a closed-front toilet seat and can be folded for transport or storage. The backrest is covered with a water resistant vinyl cloth upholstery. DIMENSIONS (HxWxD): 39 x 22 x 20 inches. Folded, the chair is 39 inches long. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

53. MJM SHOWER CHAIR (MODEL 118-3-F-LSB-18)

    The MJM Shower chair, model 118-3-F-LSB-18, is a shower chair designed for use by individuals with mobility, balance, or neurological disabilities. A flat stock seat and lap security bar are standard on this model. The backrest is covered in water-resistant vinyl upholstery. This chair is also equipped with four threaded-stem casters. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

54. MJM SHOWER CHAIR (MODEL 118-3-FS)

    The MJM Shower chair, model 118-3-FS, is a shower chair designed for use by individuals with mobility, balance,or neurological disabilities. This chair has a PVC plastic frame with a wider flared base for stability. Standard equipment includes an open-front plastic commode seat, four threaded-stem casters, and a backrest covered in water resistant-vinyl mesh upholstery. DIMENSIONS (HxWxD): 40 x 26 x 18 inches. The flared base adds 4 inches to the width. The seat height is 21 inches. Casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

55. MJM SHOWER CHAIR (MODEL 118-3-H)

    The MJM Shower chair, model 118-3-H, is a shower commode chair designed for use by individuals with mobility, balance, or neurological disabilitiess. This chair has a PVC plastic frame, an open-front plastic commode seat, and a high backrest covered in water-resistant vinyl mesh upholstery. This chair is equipped with four threaded-stem casters. OPTIONS: Head bolster. DIMENSIONS(HxWxD): 49 x 22 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

56. MJM SHOWER CHAIR (MODEL 118-3-OF)

    The MJM Shower chair, model 118-3-OF, is an shower commode chair designed for use by individuals with mobility, balance, or neurological disabilities. The open-front frame is made of PVC plastic. The chair is equipped with an open-front commode seat and four threaded-stem casters. The backrest is covered in water resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

57. MJM SHOWER CHAIR (MODEL 118-3-TS-12QT.C)

    The MJM Shower chair, model 118-3-TS-12QT.C, is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. This chair has a PVC-plastic frame, a tilt seat, and a backrest covered with water-resistant vinyl mesh upholstery. The chair is equipped with four threaded-stem casters. OPTIONS: 12-quart commode pail with handles. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

58. MJM SHOWER CHAIR (MODEL 118-3-VS)

    The MJM Shower chair, model 118-3-VS, is designed for use by individuals with mobility, balance, or neurological disabilities. The frame is made of PVC plastic. This chair has a snap-on seat with splash guard for ease of cleaning and disinfecting, a backrest covered with vinyl mesh, and four threaded-stem casters. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. Casters are 3 x 1.25 inches. CAPACITY: 300 pounds.

59. MJM SHOWER CHAIR (MODEL 118-3-VS-SFS-DDA-7QT-C)

    The MJM Shower Chair, model 118-3-VS-SFS-DDA-7QT-C, is designed for use by individuals with mobility, balance, or neurological disabilities. Features include a PVC plastic frame with dual drop arms, a sliding footrest support, and a vacuum seat. The backrest is covered in water- resistant vinyl mesh upholstery. This chair is equipped with threaded stem casters. OPTIONS: 7-quart commode pail. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The casters are 3x 1.25 inches. CAPACITY: 300 pounds.

60. MJM SHOWER CHAIR (MODEL 126-4-NB)

    The MJM Shower Chair, model 126-4-NB, is an extra-wide caster shower chair designed for use by individuals with mobility, balance, or neurological disabilities. The frame is PVC plastic, and the chair includes a plastic toilet seat and a commode bucket. The backrest is covered in water resistant vinyl mesh upholstery. The chair is equipped with four threaded-stem casters. DIMENSIONS(HxWxD): 40 x 30 x 18 inches, with an interior width of 26 inches. The seat height is 21 inches. The casters are 4 x 1.25 inches. CAPACITY: 425 pounds.

61. MJM SHOWER CHAIR (MODEL 130-5)

    The MJM Shower Chair, model 130-5, is a bariatric shower commode chair designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, a solid seat with a toileting cutout, and six threaded-stem casters, four locking. The backrest is covered in water-resistant vinyl mesh. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat is 21 inches high x 23 inches deep. The casters are 5 x 1.25 inches. CAPACITY: 700 pounds.

62. MJM TILT-N-SPACE SHOWER CHAIR (MODEL 193-TIS & 193-TIS-SQ-PAIL)

    The MJM Tilt-N-Space Shower Chair is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. These chairs have coated PVC plastic frames and feature dual drop arms that secure with safety straps, a deluxe elongated open-front soft seat, a push bar, a footrest platform, and heavy-duty threaded casters. The backrest and legrest are covered in water-resistant vinyl mesh upholstery. The chair offers seven different positions. Model 193-TIS-SQ-PAIL includes a commode pail. DIMENSIONS(HxWxD): 53 x 22 x 20inches overall. Total depth with footrest is 54.5 inches in the upright position and 56.5 inches in the reclined position. The height from the floor to the top of the seat back is 53 inches and the height from the seat to the top of the seat back is 32.5 inches. The push bar is 36.5 inches from the floor. The reclined back is 27 inches. The casters are 4 inches in diameter. CAPACITY: 400 pounds. COLOR: White frame and red safety straps.

63. MJM WIDE DELUXE SHOWER CHAIR (MODEL 122-3)

    The MJM Wide Deluxe Shower Chair, model 122-3, is a caster shower chair designed for use by individuals with mobility, balance, or neurological disabilities. This model features a PVC plastic frame with dual drop arms and sliding footrest support. The chair is also equipped with an open-front plastic toilet seat and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 40 x 26 x 18 inches. The seat height is 21 inches. The casters are 3 x 1.25 inches. CAPACITY: 375 pounds.

64. MOBILE SHOWER CHAIR (MODEL 6358)

    Caster shower chair assists with transport as well as shower functions. Five inch swivel casters for maneuverability, with wheel locks on rear casters. Nylon fabric backrest. Toilet seat and commode pail standard equipment. Aluminum tubing frame. Footrest. Optional Ensolite padded seat. Molded plastic full-length armrests. Fits over most toilets.

65. OPEN FRONT SHOWER CHAIR (MODEL 118-3-OF)

    The Open Front Shower Chair, model 118-3-OF, is a shower chair and commode with casters designed for use by individuals with balance or mobility disabilities. The chair has a PVC plastic frame with armrests, four threaded stem casters, and a commode seat with an open front. DIMENSIONS (HxLxW): Frame is 40 x 18 x 22 inches. The seat 21 inches high and 18 inches wide. The casters are 3 inches in diameter x 1.25 inches wide. CAPACITY: 300 pounds. COLOR: Frame is white.

66. OTTER BATH SEAT (MODELS OT 1000, OT 2000, & OT 3000)

    The Otter Bath Seat is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs, has a folding plastic frame and is upholstered with removable, machine-washable mesh fabric, and includes two adjustable positioning belts and width- and height-adjustable head cushions. Leg straps control abduction and adduction. The seat and back are angle-adjustable and have five angle adjustments at 0, 22.2, 45, 67.5, and 90 degrees. OPTIONS: A height-adjustable base for tub use fits all models. SIZES: Model OT 1000 is small and fits users up to 36 inches tall. Model OT 2000 is medium and fits users 32 to 50 inches tall. Model OT 3000 is large and fits users 46 to 68 inches tall. DIMENSIONS(DxWxH): The seat is 13 x 14 x 2 to 7 inches for models OT 1000 and OT 2000 and 16.5 x 14.5 x 2 to 7 inches for model OT 3000. CAPACITY: 60 pounds on model OT 1000, 120 pounds on model OT 2000, and 160 pounds on model OT 3000. COLOR: White frame and blue upholstery. WARRANTY: Two-year limited warranty.

67. PADDED TRANSFER BENCH WITH BACK (MODEL 9080)

    The Padded Transfer Bench with Back, model 9080, is designed for use by individuals with mobility disabilities, balance, and cognitive disabilities who have difficulty standing in a tub or shower. The bench extends over the side of the tub, allowing the individual to sit and slide into the tub without having to step over the tub side. The bath bench has an anodized aluminum frame with a padded seat and back. It adjusts to left- or righ-side tub entry placing the back on either side. The bench is equipped with a handle to aid in transfers. DIMENSIONS: The height adjusts from 32 to 36 inches. CAPACITY: Weight capacity is 300 pounds.

68. PEDIATRIC / SMALL ADULT SHOWER CHAIR (MODEL 115-3TW-SS-RH)

    The Pediatric/Small Adult Shower Chair, model 115-3TW-SS-RH, is a shower chair and commode with casters designed for use by children or small adults with balance or mobility disabilities. This chair has a frame made of PVC plastic with a padded back, a commode seat, and threaded stem casters. DIMENSIONS (HxLxW): Frame is 36 x 16 x 19 inches. The seat height is 18 inches and the seat width is 15 inches. Casters are 1.25 inches wide x 3 inches in diameter. CAPACITY: 300 pounds. COLOR: Frame is white.

69. PLASTIC BATHTUB TRANSFER BENCH

    The Plastic Bathtub Transfer Bench is designed for use by individuals with spinal cord injury or mobility or balance disabilities. This molded-plastic bench features a molded backrest, a molded side rail, a molded soap dish, and storage for a hand-held shower (not included). The unit can be adjusted for right- or left-handed tub entry and the Exact Level adjustment provides height adjustment and stability. DIMENSIONS (WxDxH): 35 x 19.5 x 18 to 23.5 inches. CAPACITY: 350 pounds.

70. PORTABLE PLASTIC BATH BOARD

    The Portable Plastic Bath Board is a bathboard designed for use by individuals with spinal cord injury, mobility, or balance disabilities. This molded-plastic board adjusts to fit over standard tubs and rubber stops protect the tub. The portable board has two handholds at each end. DIMENSIONS (WxD): The board fits tubs from 19 to 28 inches wide and is 31 x 14.25 inches. CAPACITY: 300 pounds.

71. RUBBERMAID BATHING SEAT

    The Rubbermaid Bathing Seat is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 11.3 pounds.

72. RUBBERMAID PORTABLE TUB TRANSFER SEAT

    The Rubbermaid Portable Tub Transfer Seat is a transfer bench designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded bench rests on the sides of the tub and has rubber stops for secure placement and to protect the tub from scratches. The bench installs without tools and features a built-in sop dish with drain holes. DIMENSIONS: 14.25 x 31 inches. CAPACITY: 300 pounds. WEIGHT: 5 pounds.

73. RUBBERMAID TRANSFER BENCH

    The Rubbermaid Transfer Bench is a transfer bench designed for use in showers and bathtubs by individuals with mobility disabilities. This height-adjustable bench has independently adjustable legs, allowing two legs to be inside the tub or shower and two to be outside, facilitating independent sliding transfers. The bench has a corrosion-resistant aluminum frame and side rail and a blow molded textured plastic seat and backrest. The seat is constructed in sections to create channels to accommodate the shower curtain for bathing privacy. The backrest brackets adjust for right- or left-side use. DIMENSIONS (WxD): 38 X 16 inches. The height adjusts in .5-inch increments from 18 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 12.5 pounds.

74. SAFETY BATH MAT

    The Safety Bath Mat is a shower mat designed to provide traction in the bathtub or shower for people with balance or mobility disabilities. This machine-washable mat has suction cups over the entire bottom surface for security, and drainage holes keep water off the surface. SIZES: Large or small. DIMENSIONS (LxW): The large mat is 30 x 13.75 inches and the small mat is 22.25 x 13.75 inches.

75. SHOWER / BATH CHAIR WITH BACKREST (MODEL 1369)

    Aluminum bath chair. Molded plastic seat has drain holes to keep water in the tub. Handles on each side. Non-slip textured finish with contoured seat and back. Flared legs. Non-slip rubber tips. Back height 13 inches. Weight 8 pounds. Fits inside standard tub.

76. SHOWER AND BATH TRANSFER AID (MODELS 6481, 6484, 6461, & 6451)

    Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Vinyl coated seat standard or deluxe padded Ensolite high-density foam padding, does not absorb moisture. Spans tub wall enabling easy transfer.

77. SHOWER CHAIR WITH FLARED STABILITY BASE (MODEL 118-3FS)

    The Shower Chair with Flared Stability Base, model 118-3FS, is a shower chair and commode with casters designed for use by individuals with balance or mobility disabilities. This chair has a frame PVC plastic frame, a commode-style seat, armrests, and four threaded stem casters. The legs are flared for stability. DIMENSIONS (HxLxW): 40 x 18 x 26 inches. The seat 21 inches high x 18 inches wide. The casters are 3 inches in diameter x 1.25 inches in width. CAPACITY: 300 pounds. COLOR: Frame is white.

78. SHOWER SHIELD

    Plastic protector to keep cast and bandages dry during bathing or showering. Polyurethane. Adjustable gripper strip to seal opening. User applied and reusable. Youth or adult sizes for full leg or arm, lower leg or arm.

79. SIDE MOUNT WALKER CARRYON (MODEL EZ0030)

    The Side Mount Walker Carryon, model EZ0030, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weatherproof nylon, this pack attaches to the side of a walker using dual-strap attachment anchors that fasten to the front of the walker's frame. Features include a detachable beverage holder and several pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIONS (DxLxW): 2.5 x 15 x 14.5 inches. COLOR: Black. WARRANTY: One-year limited warranty.

80. SNAP-ON WALKER BASKET

    The Snap-On Walker Basket with Tray is a wire basket for a walker designed for use by individuals who carry items when using a walker. The Basket attaches to a walker without tools includes a tray and cup insert.

81. STANDARD BATH MAT (MODELS B3415B & B3415P)

    The Standard Bath Mat is a bathtub mat designed to prevent slipping for people with balance, mobility, or lower extremity disabilities. Sized for use in tubs or showers, suction cups over the bottom surface anchor the mat to the tub or shower floor. DIMENSIONS (WxL):14 x 23 inches. COLOR: Model B3415B is blue and model B3415P is pink.

82. TRANSFER BENCH (MODELS 98013 & 98014)

    Transfer bench with water resistant vinyl covered foam cushions. Suction cups secure to tub floor. Backrest and armrest. Backrest can be mounted on either side for right or left access. Lightweight, rust resistant, anodized aluminum frame. Pushbutton height adjustment. Available with standard or commode seat. Commode seat can be positioned in any direction for easy access to perineal area. Adjustable seat height 16 1/2 to 22 inches. Seat depth 16 1/2 inches. Overall width 29 inches. Overall height 34 to 39 inches. Weight 16 pounds.

83. TRANSFER BENCHES (MODELS K10366 & K11119)

    Transfer Benches, Models K10366 & K11119, are bath seats designed for persons with physical disabilities using wheelchairs. The unique design allows individuals to slide from a wheelchair into the tub. The backrest can be flipped for either right or left setup and a push-button height adjustment and rubber non-slip feet provide additional stability. Seats come in either padded or solid polyethylene versions. DIMENSIONS: Seat height adjusts from 17.5 to 22.5 inches. Seat measures 16.5 x 27 inches. CAPACITY: 275 pounds.

84. TRANSPORT WHEELCHAIR

    The Transport Wheelchair is designed for use by individuals with mobility disabilities. FRAME: This lightweight, attendant-propelled wheelchair is 19 inches wide open, folds for transport and storage, and includes push handles. ARMRESTS: Fixed padded armrests. BRAKES: Toggle foot-operated brakes on the rear casters. CASTERS: Four 8-inch mag caster wheels. FOOTRESTS: Removable footrests with flip-up footplates. CAPACITY: 250 pounds. WEIGHT: 27 pounds.

85. TUB TRANSFER BENCH (MODELS 98014 & 98013)

    Transfer tub bench, anodized aluminum frame with vinyl covered foam padded seat and back cushions. Backrest has open loop in frame to allow variety of arm positions for transfer, side transfer, section extends over side of tub for easy transfer. Two legs in tub have rubber tips, leg extensions available. Two clamps with large rubber discs securely attach bench to tub wall. Seat height 15 to 18 1/2 inches. Clamp adjusts 2 to 6 1/2 inches. Seat depth 18 inches. Fits tubs from 11 to 14 1/2 inches deep, leg extensions for tubs 15 to 18 1/2 inches deep. Overall height 31 to 34 1/2 inches, overall length 29 1/4 inches, overall width 21 inches. Weight 16 1/2 pounds.

86. TUB TRANSFER CHAIR (MODEL 6361)

    Transfer tub bench, padded slat seat and back support. Transfer extension with two legs outside bathtub. Side arm on one side. Legs flared for added stability, two with suction holders. Beige vinyl over closed cell foam, seat 3 5/8 inches thick. Overall width 21 inches, length 33 1/2 inches. Seat height 16 1/2 to 20 inches in 1/2 inch increments.

87. UNIVERSAL TOTE (MODELS EZ0101 & EZ0102)

    The Universal Tote is a carrying bag for a walker or a wheelchair side pouch designed for use by individuals with mobility or walking disabilities or spinal cord injury. Made of nylon, this pack attaches with two adjustable straps to the front of a walker, and the smaller size (model EZ0102) attaches to the armrest of a wheelchair. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0101) or three (model EZ0102) pockets on the outside. SIZES: Large (model EZ0101) and small (model EZ0102). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches (model EZ0101); 1 x 9 x 8.5 inches (model EZ0102). COLOR: Black. WARRANTY: One-year limited warranty.

88. VINYL PADDED BATHTUB TRANSFER BENCH WITH CUT OUT AND COMMODE PAIL

    The Vinyl Padded Bathtub Transfer Bench with Cut Out and Commode Pail is a transfer bench designed for use by individuals with mobility and balance disabilities and incontinence. The height-adjustable vinyl padded seat resists tearing. A side rail provides support during transfers. DIMENSIONS (HxDxW): 31 x 22 x 29 inches to top of back. Height adjusts from 18 to 22 inches in 0.75-inch increments. CAPACITY: 300 pounds. WEIGHT: 13 pounds, 4 ounces. COLOR: White.

89. VINYL PADDED TRANSFER BENCH

    The Vinyl Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The vinyl seat and back are padded with open-cell foam for comfort. OPTIONS: Leg pieces with suction cups and a commode seat with container are available. DIMENSIONS: The frame tubing is one-inch in diameter. The foam is 1.25 inches thick. The seat is 23 inches wide x 16 inches deep. The seat height adjusts from 17.5 to 22 inches. The overall height ranges from 28.5 to 33 inches. WEIGHT: 13 pounds. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Limited lifetime warranty.

90. WALKER BASKET WITH TRAY

    The Walker Basket with Tray is a tray and wire basket for a walker designed for individuals who carry items when using a walker. The basket attaches to a walker with Velcro and includes a tray and cup insert to prevent items from slipping through the basket. DIMENSIONS (HxDxW): 7 x 6 x 16 inches.

91. WALKER POUCH (MODEL 6015-4)

    The Walker Pouch, model 6015-4, is a carrying bag for a walker designed to provide carrying capability for individuals with mobility disabilities. Designed to fit adult walkers, this pouch is made of lightweight, water-repellent denier nylon with urethane-coated backing. This bag attaches over the front crossbar of the walker and features an inner and an outer pocket. COLOR: Forest green and deep blue sea combination. WARRANTY: One-year limited warranty.

92. WALKER TRAY (MODEL 6007)

    The Walker Tray, model 6007, is a tray for a walker designed to provide carrying capability for individuals with mobility disabilities. This molded plastic tray features raised edges, cup and pen holders, and rounded corners. The tray clips to the crossbar of the walker, folds down and out of the way when not in use, and supports up to five pounds. WARRANTY: One-year limited warranty.

93. WHITE BATH MAT

    The White Bath Mat is a bathtub mat designed for use by individuals with balance disabilities. Hundreds of suction cups anchor this bath mat to the bottom of the tub to provide a slip- resistant surface while bathing. DIMENSIONS (L x W): 28 x 16 inches. COLOR: White.