Pro Therapy Supplies

6990 Peachtree Industrial Blvd.
Suite D
Norcross, Georgia 30071
United States
Telephone: 800-883-0368.
Fax: 770-441-1599.
Web: http://www.protherapysupplies.com.
Email: customerservice@protherapysupplies.com.

Products distributed by Pro Therapy Supplies (listed alphabetically)

1. A.E.R. (AUTO EDEMA REDUCTION) BOOT

   The A.E.R. (Auto Edema Reduction) Boot is an intermittent compression unit designed to reduce swelling in the lower extremity. This device uses natural mechanical action to produce a dynamic reduction of fluid from the leg. When the boot contacts the ground in the walking motion, air from a chamber beneath the foot is compressed, causing the pressure in the chambers to increase. When weight bearing is achieved, the pressure reaches a maximum level. When the foot begins to leave the ground, pressure is decreased, resulting in dynamic intermittent compression. The boot is available in a standard model and a sport model, both with a hand pump. The sport model features inside pockets to accommodate ice or FlexiPAC (see separate entry) cold packs for combination cold and compression therapy. SIZES: One size. COLOR: The standard model is grey and the sport model is blue.

2. A.E.R. (AUTO EDEMA REDUCTION) COMPRESSION THERAPY SYSTEM

   The A.E.R. (Auto Edema Reduction) Therapy System is an intermittent compression unit designed to reduce swelling in the lower extremity. This system combines a deluxe PresSsion pump (see entry) with an A.E.R. Boot to achieve active and passive compression therapy. The Boot enables compression therapy to continue outside the medical or clinical setting. The boot uses natural mechanical action to produce a dynamic reduction of fluid from the leg. When the boot contacts the ground in the walking motion, air from a chamber beneath the foot is compressed, causing the pressure in the chambers to increase. When weight bearing is achieved, the pressure reaches a maximum level. When the foot begins to leave the ground, pressure is decreased, resulting in dynamic intermittent compression. The boot is available in a standard model and a sport model, both with the PresSsion pump. The sport model features inside pockets to accommodate ice or FlexiPAC (see separate entry) cold packs for combination cold and compression therapy. SIZES: One size. COLOR: The standard model is grey and the sport model is blue.

3. ACHIEVER ANKLE SUPPORT

   The Achiever Ankle Support is designed for use by individuals with lower extremity disabilities. This slip-on Neoprene support can be worn on either foot and provides support, warmth, and compression. SIZES: Extra Small, small, medium, large, extra large, and extra extra large. COLOR: Black.

4. ACHIEVER ECONOMY HINGED KNEE SUPPORT

   The Achiever Economy Hinged Knee Support is a knee orthosis designed for use by individuals with lower extremity disabilities. Made of Neoprene for warmth and compression, this brace has a patella opening and a nylon outer shell and is lined with nylon for ease in application and removal and to reduce skin contact and irritation. Two single-pivot hinges enclosed in Neoprene provide mild medial and lateral stability. SIZES: Extra small, small, medium, large, extra large, and extra extra large. COLOR: Black.

5. ACHIEVER ELASTIC LUMBOSACRAL SUPPORT

   The Achiever Elastic Lombosacral Support is a low back orthosis designed for use by individuals with low back pain, injury, or disabilities. This elastic support provides firm intra-abdominal support and the Neoprene lumbar panel gives warmth and compression to the lumbar area. A lumbar pocket allows the addition of a Neoprene pad and elastic side pulls provide additional compression. SIZES: Extra small, small, medium, large, extra large, and extra extra large. COLOR: Tan.

6. ACHIEVER ELBOW SUPPORT

   The Achiever Elbow Support is designed for use by individuals with upper extremity disabilities. This slip-on Neoprene support is anatomically contoured and provides gentle compression and warmth. SIZES: Extra Small, small, medium, large, extra large, and extra extra large. COLOR: Black.

7. ACHIEVER FOREARM SUPPORT

   The Achiever Universal Forearn Support is designed for use by individuals with upper extremity disabilities. This brushed nylon Neoprene support features a sewn-in felt pad for enhanced compression and hook-and-loop closure. SIZES: One size. COLOR: Tan

8. ACHIEVER HINGED KNEE SUPPORT WITH POPLITEAL CUT-OUT

   The Achiever Hinged Knee Support with Popliteal Cut-out is a knee orthosis designed for use by individuals with lower extremity disabilities. Made of Neoprene for warmth and compression, this brace has a politeal opening and a nylon outer shell and is lined with nylon for ease in application and removal and to reduce skin contact and irritation. Polycentric hinges and condyle pads provide medial and lateral stability. Pull-pin range of motion limiters allow the range of extension and flexion to be set. SIZES: Extra small, small, medium, large, extra large, and extra extra large. COLOR: Black.

9. ACHIEVER HORSESHOE PATELLA SUPPORT

   The Achiever Horseshoe Patella Support is a knee orthosis designed for use by individuals with lower extremity disabilities. Made of Neoprene for warmth and compression, this brace has a patella opening and a nylon outer shell and is lined with nylon for ease in application and removal and to reduce skin contact and irritation. The horseshoe buttress may be positioned for patellar support for the medial, lateral, inferior, or superior position. SIZES: Extra small, small, medium, large, extra large, and extra extra large. COLOR: Black.

10. ACHIEVER LATERAL PATELLA KNEE SUPPORT (J)

    The Achiever Lateral Patella Knee Support is a knee orthosis designed for use by individuals with lower extremity disabilities. Available for the right or left leg and made of Neoprene for warmth and compression, this brace has a patella opening and a nylon outer shell and is lined with nylon for ease in application and removal and to reduce skin contact and irritation. The J-shaped buttress provides lateral stabilization and inferior and superior lateral straps control pressure on the patella. SIZES: Extra small, small, medium, large, extra large, and extra extra large. COLOR: Black.

11. ACHIEVER LUMBOSACRAL SUPPORT

    The Achiever Lombosacral Support is a low back orthosis designed for use by individuals with low back pain, injury, or disabilities. This semi-rigid Neoprene support provides warmth and compression to the lumbar area. Four removable stays may be heat contoured and the side pulls provide a custom fit. DIMENSIONS: The stays are 2 inches. SIZES: Small, medium, large, extra large, and extra extra large. COLOR: Black.

12. ACHIEVER SOC

    The Achiever Soc is an ankle support designed for use by individuals with lower extremity disabilities. This Neoprene support features a lace-up and strapping system for maximum support. The calcaneal heel lock and lateral stirrup strapping control plantar flexion inversion without restricting normal raqnge of motion. The medial and lateral malleoli buttress prevents migration aqnd adds comfort. SIZES: Extra Small, small, medium, large, extra large, and extra extra large. COLOR: Black.

13. ACHIEVER UNIVERSAL BOOMERANG WRIST SUPPORT

    The Achiever Universal Boomerang Wrist Support is a wrist splint designed for use by individuals with upper extemity injuries or disabilities or carpal tunnel syndrome. This Neoprene wrap fits the right or left hand encases the wrist and the lower part of the palm for compression and support. SIZE: One size. COLOR: Black.

14. ACHIEVER UNIVERSAL KNEE WITH PATELLA CUT-OUT

    The Achiever Universal Knee with Patella Cut-Out is a knee orthosis designed for use by individuals with lower extremity disabilities. Made of Neoprene for warmth and compression, this wrap-around brace has a nylon outer shell and is lined with nylon for ease in application and removal and to reduce skin contact and irritation. SIZES: Standard or maxi. DIMENSIONS: The standard size fits legs up to 24 inches in circumference six inches above the mid patella. The maxi size fits legs up to 26.5 inches in circumference six inches above the mid patella. COLOR: Black.

15. ACHIEVER UNIVERSAL LUMBOSACRAL SUPPORT

    The Achiever Universal Lombosacral Support is a low back orthosis designed for use by individuals with low back pain, injury, or disabilities. This brushed nylon Neoprene support provides warmth and compression to the lumbar area. Four flexible roll stays and a lower lumbar pad provide support and side pulls provide additional compression. SIZES: One size fits all and can be trimmed to fit. COLOR: Tan.

16. ACHIEVER WRIST WRAP

    The Achiever Wrist Wrap is a wrist splint designed for use by individuals with upper extemity injuries or disabilities. Woven nylon covers the Neoprene inner lining. Two-way hook-and-loop strapping provides a cuswtom fit and interchangeable foam inserts allow varying degrees of support. SIZES: Small, medium, and large. COLOR: Black.

17. ADAPTA MASSAGE TABLE (MODEL MT-100)

    The Adapta Massage Table, model MT-100, is a portable treatment table. This manually height-adjustable table folds for transport and features an adjustable face cradle, dual locking knobs, a patented auto-lock cable system, and a hardwood frame. A deluxe carrying case is included. OPTIONS: Armrest accessory and additional carrying case. DIMENSIONS: The table is 30 x 73 inches and the height adjusts from 25 to 35 inches. CAPACITY: This table can withstand a static load of 2,000 pounds and has a working load of 500 pounds. WEIGHT: 37 pounds. COLOR: Green upholstery wih a mahogany base finish, agate blue upholstery with a mahogany base finish, or teal upholstery with a natural base finish.

18. ADAPTA SERIES TREATMENT TABLES (MODELS AE-3, 100, & 300)

    Adapta Treatment Tables are powered treatment tables designed for use in therapeutic settings. These tables offer horizontal travel, enabling placement near a wall; flexible sections; continuous support surfaces; height adjustability; and foot-operated controls. Model AE-3 is a three-section table available with or without factory-installed casters. DIMENSIONS: Model 100 is 28 x 74 inches. Model 300 is 28 x 75 inches. All models adjust from 19 to 38 inches high. The horizontal travel is 6 inches. OPTIONS: Additional foot switch, cushions, nose cushion kit, table width paper holder, examination paper holder, RhinoHyde or designer upholstery, and retractable front caster. COLOR: Standard colors are imperial blue, black, mocha, burgundy, forest, slate, dove, or midnight gray. Extra cost designer colors include seafoam, sandstone, terra cotta, juniper, blue ridge, and rosewood. RhinoHyde upholstery comes in northwoods, cobalt, port, putty, or plum.

19. ADAPTA TRACTION TABLES (MODELS AET-4 & AFT-4)

    The Adapta Traction Tables are powered heiight-adjustable traction systems, model AET-4, or fixed height traction systems, model AFT-4. Each table has foursections. The head section adjusts up or down 25 degrees and includes a breathing slot cut-out. The large pelvic and lumbar section elevates 50 degrees. The center section is removable, and the thoracic section is stationary. Each model features vinyl upholstery with foam padding. OPTIONS: Casters, examination table paper holder, and a foot control for the powered model. DIMENSIONS: The electric hi-lo table height adjusts from 19 to 37 inches; the fixed height model is 32 inches from top to floor. CAPACITY: Lift capacity is 350 pounds on model AET-4. WEIGHT: Model AET-4 weighs 240 pounds; model AFT-4 weighs 165 pounds.

20. ATTENDS SUPERSORB BREATHABLES UNDERPAD

    The Attends Supersorb Breathables Underpad is an incontinence pad and bed underpad designed for individuals with incontinence. These pads are made with a super absorbent polymer that channels and locks fluids away from skin and helps prevent odor. A soft cloth-like topsheet covers entire surface to further protect the user's skin, and a leak-proof backsheet protects surfaces from fluid. The backsheet also is non-slip to prevent bunching or sliding. It is available with regular or maximum absorbency. DIMENSIONS (WxL): 23 x 36 inches (regular absorbency only); 30 x 36 inches (regular or maximum absorbency).

21. BAKROL

    The Bakrol is a lumbar support designed for use by individuals needing to keep the lumbar spine in extension. Made of high-resiliency foam, rhe roll is available in a choice of regular or high density and is equipped with a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: The regular density comes in 11 x 5 inches or 12 x 4 inches and the high-density is available in 12 x 4 inches.

22. BASELINE HYDRAULIC PINCH GAUGE (MODELS 12-0231 and 12-0233)

    The Baseline Hydraulic Pinch Gauge, models 12-0231 and 12-0233, is a pinch meter designed to measure pinch strength. This device is suitable for all pinch tests (tip, key, and palmar) and registers up to 50 pounds. The strength reading can be viewed as pounds or kilograms. Model 12-0231 has a standard gauge and model 12-0233 has a HiRes gauge with a bigger dial and larger numerals. OPTIONS: Carrying case. DIMENSIONS: Gauge diameter is 2.5 inches (12-0231) or 3.5 inches (12-0233). WARRANTY: 1 year.

23. BASELINE MECHANICAL PINCH GAUGE (MODELS 12-0200, 12-0205, 12-0201, 12-0206, 12-0203, 12-0208, 12-0212, & 12-0207)

    The Baseline Mechanical Pinch Gauge is a pinch meter designed to measure the hand strength of individuals with grasping disabilities or hand injury. The meter measures tip, key, and palmer pinch strength in both pounds and kilograms. The maximum reading is 60 pounds (models 12-0200 and 12-0205), 30 pounds (models 12-0201 and 12-0206), 10 pounds (models 12-0203 and 12-0208), or 2 pounds (models 12-0202 and 12-0207). The indicator remains at the maximum reading until reset. The meter comes with or without a protective case. COLOR: Blue (30 pound meter), red (60 pound meter), silver (10 pound meter), or gold (2 pound meter).

24. CARPAL TUNNEL STRETCH

    The Carpal Tunnel Stretch is a hand exerciser designed for use by individuals with carpal tunnel syndrome or to aid in the prevention of carpal tunnel syndrome. Available for the right or left hand, this lightweight device stretches the tight soft tissue of the carpal tunnel. The user places his/her hand in the device and presses down for three to five seconds to stretch. The process should be repeated several times each day.

25. CARPAL-TRAC

    The Carpal-Trac is a traction system designed to alleviate pressure on the soft tissue structures of the wrist. The interlocking wrist strap allows therapeutic traction without compressing the carpal tunnel area. This system can be used with most clinical traction units and a choice of one clevis is included.

26. CHATTA-BOOT

    The CHATTA-Boot is an ankle foot orthosis designed to prevent contractures due to immobility. This washable soft splint aids in treatment of plantar flexion contractures and maintains the lower extremity in a functional position. A laundry bag is included. OPTIONS: Regular or large boot liners, abduction bar, and transfer pad. SIZES: Regular (fits calf circumference up to 16 inches) and large (fits calf circumference 16 inches and up).

27. CHATTA-ELBOW

    The CHATTA-Elbow is an elbow support designed to prevent contractures due to immobility. This splint has a one-piece liner and removable and adjustable indexed hinges. The hinges can be set at a static setting or to allow for a range of motion. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

28. CHATTA-GRIP

    The CHATTA-Grip is a hand orthosis designed to prevent contractures due to immobility. This soft splint features a variety of palmar additions to address different degrees of finger flexion and extension. Available for the right or left hand, this washable splint is malleable to accommodate different degrees of wrist flexion/extension. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

29. CHATTA-KNEE

    The CHATTA-Knee is a knee orthosis designed to prevent contractures due to immobility. This washable soft splint aids in treatment of non-fixed contractures of the knee. This brace features a one-piece removable liner and adjustaqble indexed hinges. The hinges can be set at a static setting or to allow for a range of motion. A laundry bag is included. SIZES: Small, medium, and large.

30. CHATTANOOGA CLINICAL CERVICAL TRACTION DEVICE

    The Chattanooga Clinical Cervical Traction Device is a traction system designed for clinical use. This unit pulls at the base of the occiput for more effective cervical traction. This device can be used with Chattanooga systems and most other traction devices and performs horizontal traction. The unit includes a choice of one clevis. SIZES: One size fits most.

31. CHATTANOOGA WHEELCHAIR CUSHION

    The Chattanooga Wheelchair Cushion is a gel flotation seat cushion designed for use with wheelchairs. The top layer is made of antibacterial treated brushed tricot and the bottom layer is made of nylon pack cloth. The cushion has a gel-like center. The cushion has a built-in carrying handle. DIMENSIONS: The cushion is 17.5 x 18.5 x 2 inches. The carrying handle is 6 x 1 inch. CAPACITY: 325 pounds. WEIGHT: 12 pounds.

32. CHATTA-REST

    The CHATTA-Rest is a hand orthosis designed to prevent contractures due to immobility. This soft splint is a resting hand splint which inhibits flexion of the wrist and fingers . Available for the right or left hand, this washable splint is malleable to provide a custom fit. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

33. COLPAC (MODELS 1508, 1510, 1500, 1504, 1502, 1512, 1506, 1554, 1562, 1556, & 1552)

    The ColPaC is a cold pack designed for use in thermal therapy. This line of reusable, pliable vinyl packs contain hydrated silicate gel filler. The packs may be directly applied to the skin or wrapped in a moist towel. The packs come in vinyl or in urethane. A vinyl Eye ColPaC (no. 1510) is also available. DIMENSIONS: The Standard Size vinyl (no. 1500) is 11 x 14 inches; the vinyl Neck Contour (no. 1508) is 23 inches long; the vinyl Half Size (no. 1506) is 7.5 x 11 inches; the vinyl Quarter Size (no. 1504) is 5.5 x 7.5 inches; the vinyl Oversize is 11 x 21 inches; and a narrow rectangular pack (no. 1502) is 3 x 11 inches. The urethane Neck Contour is 21 inches long; the urethane Half Size is 6.5 x 11 inches; the urethane Oversize is 18.5 x 12.5 inches; and the urethane Standard size is 13.5 x 10 inches. COLOR: The vinyl models are blue and the urethane models are black.

34. COLPAC CHILLING UNITS (MODELS C-6, C-5, & C-2)

    ColPaC Chilling Units are cold pack units designed to chill cold packs in therapeutic settings. These units feature specially-designed interior chilling coils for faster chilling, heavy-duty compressors, closed-cell foam insulation, stainless steel cabinets, drain valves for cleaning and defrosting, and rubber swivel casters. Model C-5 is an intermediate size unit that includes six standard and six hal size ColPaCs (see entry). Model C-2 is a compact unit that includes six standard ColPacs. Model C-6 is a large capacity unit and includes 12 standard ColPacs. DIMENSIONS (HxLxW): Model C-5 is 33 x 27 x 15.5 inches. Model C-2 is 33 x 21 x 15.5 inches. Model C-6 is 33 x 34 7/8 x 20 inches. The casters on all models are 3 inches in diameter,

35. COLPAC FREEZER

    The ColPaC Freezer is a cold pack unit designed to chill cold packs in therapeutic settings. This unit has a five cubic foot capaacity and accepts any size ColPaC (see entry). Standard features include stainless steel shelves and stainless steel trays and cup holders. DIMENSIONS (HxLxW): 33.5 x 21.25 x 26 inches. COLOR: White.

36. CONDUCTOR TRANSMISSION GEL

    Conductor Transmission Gel is electrode or ultrasound gel designed for use with ultrasound or electrical stimulator units. This water-soluable, non-greasy gel is available in in a five liter jug packaged with a nineounce dispenser bottle or a case of 24 nine-ounce dispenser bottles.

37. CONTOUR SUPPORT

    The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Made of molded foam, this support is intended for use with firmer seating such as office chairs or car seats. The roll includes a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: 18 x 6 x 2.5 inches.

38. D-SHAPED SUPPORT

    The D-Shaped Support is designed for use by individuals with lumbar injuries or disabilities. Intended for use where forward leaning or movement occurs, this roll is firmer than the regular Bakrol (see entry). The roll includes a washable cotton cover with a strap and a quick-release buckle. DIMENSIONS: 12 x 4 inches.

39. DURA-STICK TENS ELECTRODES

    DURA-STICK TENS Electrodes are TENS accessories designed for use with TENS units. These single-use multi-day electrodes feature ultra-flexible construction, as well as fabric coloration to reduce visibility. These pin connector electrodes are made of polymer gel. COLOR: Tan.

40. ECONOMY BACK SUPPORT

    The Economy Back Support is a low back orthosis designed for use by individuals with low back pain, injury, or disabilities or to prevent injury from lifting. This wide support provides support for the lumbar area and includes adjustable suspenders are included. SIZES: Small, medium, large, extra large, and extra extra large. COLOR: Black.

41. ELASTO-GEL ALL PURPOSE THERAPY WRAPS

    The Elasto-Gel All Purpose Therapy Wraps are hot or cold packs designed to provide thermal therapy to various body parts. The wraps are made of a tough flexible gel covered with a four-way stretch material to allow maximum conformity, heat transfer, and comfort. The packs are available in a number of different widths for use around the wrist, elbow, head, knee, or ankle. Each wrap serves for both heat and cold treatment, remaining soft and flexible at temperatures as low as -20 degrees Fahrenheit to autoclavable temperatures of up to 250 degrees. The wraps will remain cold for 20 to 40 minutes, and will provide heat for 20 to 30 minutes. The packs may be heated in a conventional or microwave oven, crockpot, or hydrocollator, and cooled in the freezer or refrigerator. The wraps are puncture resistant. DIMENSIONS: 6 x 16 inches (TW6001, $21.95), 4 x 24 inches (TW6001, $21.95), 6 x 24 inches (TW6005, $29.45), 9 x 24 inches (TW6010, $36.40), 4 x 30 inches (TW6020, $28.80), 6 x 30 inches (TW6030, $36.80), and 9 x 30 inches (TW6040, $45.45). COLOR: Blue.

42. ELASTO-GEL CERVICAL COLLAR (MODEL CC102)

    The Elasto-Gel Cervical Collar, model CC102, is a therapy wrap for the neck and upper cervical area designed for hot, cold, and pressure treatments in physical therapy, occupational therapy, sports medicine, home care, and other applications requiring thermal therapy. The wrap is made of a flexible gel covered with a four-way stretch material to allow maximum conformity, heat transfer, and comfort. A single product serves for both hot and cold treatments. The wrap remains soft and flexible at temperatures as low as -20 degrees Fahrenheit, and is heat stable for autoclaving at temperatures up to 250 degrees. The wrap will remain cold for 20 to 40 minutes, and will provide heat for 20 to 30 minutes. The wrap may be heated in microwave or conventional ovens to provide dry heat, unless used with a wet cloth. This plastic covered pad is supplied with a removable cloth cover. The waterproof, plastic cover may be surface sterilized with standard disinfectant solutions.

43. ELASTO-GEL CERVICAL PILLOW (MODEL TP-1HC)

    The Elasto-Gel Cervical Pillow provides support and hot or cold therapy to the neck and upper spine area. The pillow consists of contoured urethane foam for support, and is fitted with gel inserts that won't leak if punctured. For cold treatments, the pillow can be chilled in a freezer; for heat therapy, pillow can be warmed in a microwave oven. The pillow will retain temperature for 20 to 40 minutes. The washable cover is made of satin and has velcro closures. DIMENSIONS: 12 x 10 x 2.5 inches overall; insert is 8 x 12 inches. COLOR: Red.

44. ELASTO-GEL CRANIAL CAP

    The Elasto-Gel Cranial Cap, models CAP600 and CAP602, are hot or cold packs designed to provide non-chemical headache relief (no aspirin, etc), and treatment of migraine headaches, hypothermia, and hyperpyrexia or heat stroke. The cap fits the contour of the head to give heat transfer uniformly over the whole area. The gel base of the cap is covered with a four-way stretch Lycra nylon fabric to allow the cap to fit the shape of the head to be comfortable. The cap is designed to treat the neck area as well, since many headaches are associated with muscle tension and nerve pressure of this area. The cap may be used for chemo-therapy or as a cool down cap for athletes. SIZES: CAP600 ($22.55) fits Small to Medium, CAP602 ($24.95) fits Large or Extra Large.

45. ELASTO-GEL FOOT/ANKLE WRAP (MODEL FA6080)

    The Elasto-Gel Foot/Ankle Wrap, FA 6080, is a hot or cold therapy wrap designed to fit the foot and ankle for thermal therapy applications in physical or occupational therapy, sports medicine, home care, and other situations. Elasto-Gel is a tough, flexible gel covered with a four-way stretch material to allow maximum conformity, heat transfer, and comfort. The wrap will remain soft and flexible at temperatures as low as -20 degrees Fahrenheit, and is heat stable to be autoclaved at temperatures of up to 250 degrees. The wrap will remain cold for 20 to 40 minutes, and will provide heat for 20 to 30 minutes. The wrap may be heated in microwave or conventional ovens for dry heat, unless used with a wet cloth. The plastic covered, waterproof wrap comes with a removable cloth cover. The plastic cover may be surface sterilized with standard disinfectant solutions. The wrap stays in place with velcro straps.

46. ELASTO-GEL HAND EXERCISER (MODELS HE5001 & HE5005)

    The Elasto-Gel Hand Exerciser is designed to improve grip, strengthen finger and hand muscles, help rehabilitate injured hands, and provide hot or cold treatment of hands, fingers, and joints. The exerciser is made of Elasto-Gel, a tough, flexible gel, and encased in fabric cover. The cylindrical-shaped device is squeezed for benefits; repeated gripping of the exerciser is recommended for several times a day for periods of about 5 to 10 minutes. As muscles strengthen and more pressure is applied, more resistance is developed by the exerciser. For hot or cold therapy, the exerciser can be heated in a microwave or conventional oven, crock pot, or hydrocollator, or placed in the freezer. DIMENSIONS: Small (HE5001, $8.10) is 1.5 x 4.5 inches, and Large (HE5005, $11.85) is 3 x 4.5 inches.

47. ELASTO-GEL HOT/COLD CERVICAL SUPPORT (MODELS CP4001 & CP4005)

    The Elasto-Gel Hot/Cold Cervical Supports are cervical pillows designed to provide hot or cold therapy to the back of the neck. The support is a cylindrical pillow made of a molded gel structure with a 4-way stretch fabric cover that allows the pillow to conform to the neck and to maximize the heat transfer to or from the treatment area. Usable temperatures range from -20 to 140 degrees Fahrenheit, and the unit can be autoclaved at temperatures up to 250 degrees. For cold therapy, the unit can be cooled or stored in a freezer; for heat therapy, a conventional or microwave oven, crockpot, or hydrocollator can be used for heating. DIMENSIONS: Small (CP4001, $25) is 3 x 10 inches; Large (CP4005, $32.80) measures 4 x 10 inches.

48. ELASTO-GEL HOT/COLD PACKS

    The Elasto-Gel Hot/Cold Packs are designed for multi-use heat and cold therapy applications. The larger packs may be used for the treatment of lower back aches; the smaller sizes may be used for earaches, headaches, neck pain, etc. These packs are plastic covered Elasto-Gel pads supplied with a removable cloth cover. The waterproof, plastic cover may be surface sterilized with a standard disinfectant solution. These wraps will remain soft and flexible at temperatures as low as -20 degrees Fahrenheit and is heat stable enough to be autoclaved at temperatures of up to 250 degrees. The rectangular wraps will remain cold for 30 to 40 minutes, and will provide heat for 20 to 30 minutes. The packs may be heated in a conventional or microwave oven, crockpot, or hydrocollator, and may be cooled or stored in the freezer. DIMENSIONS: Four sizes available including 3 x 3 inches (HC750, $5.20), 4 x 6 inches (HC800, $10), 6 x 8 inches (HC801, $18.30), 12 x 12 inches (HC804, $35.50), and 8 x 16 inches (HC805, $32.85). COLOR: Blue.

49. ELASTO-GEL LUMBAR PILLOW (MODEL L1HC)

    The Elasto-Gel Lumbar Pillow is a low back orthosis that can provide hot or cold therapy. The pillow is made of contoured urethane foam for support and fitted with a gel insert. For cold treatments, pillow can be chilled in a freezer; for heat therapy, pillow can be warmed in a microwave oven. The pillow will retain the temperature for 20 to 40 minutes. The velour cover is washable and has velcro closures. DIMENSIONS: 14 x 13 x 3.5 inches overall; inserts are 8 x 12 inches. COLOR: Navy blue.

50. ELASTO-GEL LUMBAR WRAP

    The Lumbar Wraps, models LW201 to LW205, are hot and cold therapy packs for physical therapy, sports medicine, home care, occupational therapy, and other applications requiring hot and cold treatments and simultaneous pressure treatment. These wraps are designed for the lower back and attach to the affected area like a belt. The wraps are made of a flexible gel covered with a four-way stretch material to allow maximum conformity, heat transfer, and comfort. The wrap will remain soft and flexible at temperatures as low as -20 degrees Fahrenheit and is heat stable so that it can be autoclaved at temperatures to 250 degrees Fahrenheit. The wrap will remain cold for 20 to 40 minutes, and will continue to provide heat for 20 to 30 minutes. The packs may be heated in microwave ovens. Each pack is supplied with a removable cloth cover. The plastic cover may be surface sterilized with standard disinfectant solutions. The packs are waterproof, and provide dry heat unless used with a wet cloth. SIZES: Available in Small (24 to 30 inch waists, LW201-SM), Medium (for 32 to 36 inch waists, LW202-MED), Large (for 36 to 40 inch waists, LW203-LG), Extra Large (for 40 to 44 inch waists, LW204-XLG), and Extra Extra Large (for 46 to 52 inch waists, LW205-3XLG).

51. ELASTO-GEL OCCLUSIVE DRESSING

    Elasto-Gel Occlusive Wound Dressing is a wound care product designed to provide a combination of absorbance and adhesive properties to use in a variety of medical and therapy settings. The pads may be used as dressings; as padding or cushioning around tracheal tubes, under oxygen masks, and in the prevention of skin abrasion; or bolus as a near "tissue equivalent" that conforms to nearly any body contour to result in uniform radiation dosage (it is easily layered to give additional beam moderation). The Elasto-Gel Hydrogel does not liquefy into the wound, leaving it debris-free and reducing clean up; is highly absorbent to absorb secretions and reduce odor; and is compatible with a variety of medications. The gel will not stick to the wound and will not dry out, allowing wounds to be checked more frequently without changing the dressing. Sold individually (prices listed is per unit), or by the case. DIMENSIONS: Dressing pads come 4 x 4 inches (DR8000, 100 per case), and 6 x 8 inches (DR8600), 12 x 12 inches (DR8700), and 8 x 16 inches (DR8800) in cases of 25 each.

52. ELASTO-GEL SEAT CUSHIONS (MODELS F2010, F2011, SC3020, & SC3021)

    The Elasto-Gel Seat Cushions are flotation gel wheelchair cushions designed to reduce pressure, maintain a cool temperature, and control moisture. The cushions are constructed with a layer of soft polymer gel covered with a breathable, four-way stretch fabric. The gel is layered with a 1-inch urethane foam pad and housed in a washable, removable cover. The cushions will not leak even if punctured. The cushions have a large heat capacity and therefore a nearly constant temperature is maintained. The cushion may be cooled in a refrigerator or freezer to provide an extra cool seat. The cushions may also be warmed in a microwave or conventional oven for colder climates. Four models of these cushions are available: the Contour Cushion with Velour Cover (SC3020, $145), the Contour Cushion with Waterproof Cover (SC3021, $155), the Flotation Cushion Solid Gel with Velour Cover (F2010, $184), and the Flotation Cushion with Waterproof Cover (F2011, $192). DIMENSIONS: Contour Cushions are each 17 x 17 x 2 inches; Flotation Cushions are 16 x 16 x 1.25 inches. WEIGHT: Contour cushions are 8 pounds each, Flotation Cushions are 15 pounds each.

53. ELASTO-GEL SHOULDER WRAP (MODEL SW90001)

    The Elasto-Gel Shoulder Therapy Wrap, model SW9001, is a hot and cold therapy system designed specifically for the shoulder area. It provides thermal therapy and pressure to all the shoulder muscles of the upper arm, the upper chest, and the upper back. The user can do arm movements or exercises while wearing the shoulder wrap due to it's flexibility and placement straps. The wrap may be heated to an autoclavable temperature of up to 250 degrees Fahrenheit, or stored in temperatures as low as -20 degrees. The wrap will retain heat for 20 to 30 minutes, and remain cold for 30 to 40 minutes. Elasto-Gel products may be heated in a conventional or microwave oven, crockpot, or hydrocollator, and cooled or stored in a refrigerator or freezer. DIMENSIONS: 16 x 24 inches. COLOR: Blue.

54. ELASTO-GEL SINUS MASK (MODEL SM301)

    The Elasto-Gel Sinus Mask, model SM301, is a hot or cold pack designed for relief of sinus headaches, sinus infections, or post eye surgery. The unit also works as a light sheld for daytime sleeping. The mask can be used cold to reduce swelling, numb the area, and reduce pain; or the mask can be used hot to stimualte blood circulation. The mask can be heated in microwave or conventional ovens, and cooled in the freezer or refrigerator. SIZE: Universally sized (one size fits all).

55. ELASTO-GEL THERAPEUTIC WRIST WRAP (MODELS WR-200 & WR-205)

    The Elasto-Gel Therapeutic Wrist Wrap is a hot or cold therapy wrist splint designed for treatment of carpal tunnel syndrome, sprains, strains, post operative surgery, arthritis, and other conditions. Two models are available: WR-200 for hot or cold therapy, and WR-205 for cold treatment only. WR-200 is covered with a four-way stretch lycra-nylon fabric to allow a close fit to the contours of the treatment area. Model WR-205 is covered with woven nylon and has a more rigid design to provide more wrist support. The gel mask can be heated in microwave or conventional ovens, or cooled in a freezer or refrigerator.

56. ELASTO-GEL THERAPY MITTEN (MODEL TM7001)

    The Elasto-Gel Therapy Mitten, model TM7001, is a hot or cold pack designed for the treatment of injured or arthritic hands prior to and after rehabilitation exercises. When used for heat treatment, the mitten provides a moist warm heat which is readily trasmitted to the muscles and joints and helps to restore hand flexibility. This mitten-shaped wrap is made of a flexible gel covered with a four-way stretch material which allows maximum conformity, heat transfer, and comfort. The gel can be heated or autoclaved at temperatures up to 250 degrees Fahrenheit, or freezed at temperatures as low as -20 degrees. The mitten will remain cool for 20 to 40 minutes, and will provide heat for 20 to 30 minutes. This pack may be cooled in a freezer or heated in conventional or microwave oven, crockpot, or hydrocollator. COLOR: Blue.

57. ELASTO-GEL TMJ THERAPY WRAP (MODELS TMJ500 & TMJ501)

    The Elasto-Gel TMJ Therapy Wrap is a temporomandibular joint (TMJ) wrap designed to provide hot and cold therapy in the treatment of the TMJ and for relief of the pain associated with TMJ disorder by applying thermal therapy to the muscles and joints. This wrap fits over the head, neck, and cheek/jaw areas and fastens with a velcro closure. SIZES: TMJ500 ($21.35) for Small or Medium, TMJ501 ($22.55) for Large or Extra Large.

58. ELASTO-GEL TORSO PAD (MODEL T4010)

    The Elasto-Gel Torso Pad, model T4010, is a flotation gel pad for use in bed or in a wheelchair. The soft, polymer gel pad has a washable, removable cover. DIMENSIONS: 24 x 30 x 3/4 inches. WEIGHT: 25 pounds.

59. EMG RETRAINER

    The EMG Retrainer is an EMG feedback unit designed for use with individuals with orthopedic or neuromuscular disabilities or chronic pain. This palm-sized, portable, dual-channel unit continuously measures and quantifies muscle movement and displays the results on the built-in flip-up liquid crystal display (LCD) and provides video and audio feedback. The system is menu-based for quick set-up and information for up to eight protocols can be stored. Targets can be set manually, by peak muscle activity, or by average muscle activity. A zoom feature concentrates the activity around the target. Additional features include automatic gain control and a built-in speaker. The set includes the unit, two leads, a Nylatex wrap (see also separate entry), a wrist strap, a belt clip, a carrying case, four disposable electrodes, and an instruction manual. OPTIONS: Vaginal probe, rectal probe, additional lead wire, additional carrying cas and belt clip, and earphones.

60. EMG RETRAINER

    The EMG Retrainer is an EMG feedback unit for muscle re-education for individuals with neurological disabilities and motor disabilities. The EMG Retrainer measures and quantifies muscle movement with the results displayed on a liquid crystal display (LCD). It can be programmed to assess the activity of healthy and damaged muscle. This dual channel unit is designed to continuously monitor muscle movement, providing visual and auditory feedback. Standard features include a menu-based system for easy setup, storage of set-up information for up to eight protocols, a silicon touch pad, and a built in speaker. The EMG Retrainer comes complete with two leads, a Nylatex wrap, a wrist strap, a belt-clip, a carry pouch, sample electrodes, and an instruction manual. POWER: Uses two double-A batteries (included). DIMENSIONS (HxLxW): 1.8 x 3.6 x 3.2 inches. WEIGHT: 4.5 ounces, including batteries.

61. EMG RETRAINER IR

    The EMG Retrainer IR is an EMG feedback unit designed for use with individuals with orthopedic or neuromuscular disabilities or chronic pain. This dual-channel surface EMG system with built-in infrared wireless communications features a plug-and-play infrared reading device which transmits captured EMG information wirelessly to most Windows-based computers. Data is then displayed online with the included software package, which allows for live session display, playback, and file storage. This system provides accurate, instantaneous auditory and visual feedback, all sessions can be filed and stored for review and comparison, and the system can monitor two channels simultaneously.The system operates in English, Spanish, French, German, and Dutch. COMPATIBLE: For use on IBM and compatible computers. SYSTEM REQUIREMENTS: Intel-based 333 MegaHertz (MHz) or faster processor, Windows 98 or higher, SVGA monitor with 800/600 resolution or greater, 32 megabytes (MB) RAM, 80 MB free hard drive space, and a CD-ROM drive.

62. EPITRAIN (MODEL 3650)

    Intermittent compressive elbow support with two viscoelastic inserts: one for the radial epicondyle and musculature and the other for the ulnar epicondyle and musculature. Elbow supported in a semiflexed position. Available in right or left versions and standard or slender sizes. Circumference 7 inches to 11 inches below elbow, 9 inches to 13. 75 inches above elbow.

63. ERGOBASIC (MODELS 9040, & 9050)

    The ErgoBasic is a treatment table designed for use in therapeutic and clinical settings. These tables feature a tilt head and an Accelerator Pelvic Drop, and gas-powered spring height adjustment. Model 9040 has soft foam cushions and model 9050 has firm foam cushions. OPTIONS: Elevating pelvic section, an E-Z Tilt Headpiece, and RhinoHyde upholstery. DIMENSIONS: The height on all models adjust from 18 to 24 inches. COLORS: The staindard upholstery is available in eight standard colors and six optional designer colors. The optional RhinoHyde upholstery is available in five colors.

64. ERGOBENCH (MODELS 9020, 9030, 9000, & 9010)

    The ErgoBench is a treatment table designed for use in therapeutic and clinical settings. These height-adjustable tables have unitized steel frames with a bottleneck shape, seamless cushions, multi-fit armrests, and a paper cutter/dispenser. Models 9020 and 9000 have soft foam cushions and models 9010 and 9030 have firm foam cushions. Models 9020 and 9030 have fixed head sections and models 9000 and 9010 have tilting head pieces. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height on all models adjust from 18 to 24 inches. COLORS: The staindard upholstery is available in eight standard colors and six optional designer colors. The optional RhinoHyde upholstery is available in five colors.

65. ERGOWAVE INTERSEGMENTAL TABLE

    The ErgoWave Intersegmental Table is a powered traction table designed for clinical use. This table covers all areas of the patient's spine with intersegmental traction every 13 seconds, while the ErgoWave roller pattern travels up the spine. Features include a welded steel frame, height-adjustable rollers, and a built-in storage shelf in the base. OPTIONS: Leg bolster pillow, head pillow, treatment mat, and a nose hole option. DIMENSIONS (HxWxL): 24 x 25 x 78 inches. The treatment area is 25 inches and the roller height adjustment is 3 inches. CAPACITY: 350 pounds.

66. FACIAL FLEX ULTRA

    Facial-Flex Ultra is a facial muscle exerciser designed for use by individuals with severe facial burns or speech disabilities. Applications for this dynamic resistance device for strengthening the oral-motor and neck musculature include increasing oral facial motor strength, range of motion, voluntary control, and timing and coordination for such impairments as dysarthria, oral apraxia, facial paresis, oral dysphagia and facial contractures caused by severe burns. OPTIONS: Replacement flexbands (2, 4, 6, 8, or 14 ounce bands). SIZES: Adult or pediatric.

67. FLEXION STOOL (MODEL TXS-1)

    The Flexion Stool, model TXS-1, is a traction system designed for clinical use. This adjustgable-height stool has a wide base with a rectangular padded top and enables the user to be placed with the lumbar spine in the neutral or flexed position. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height adjusts from 13 to 20 inches. COLORS: The standard upholstery is available in eight standard and six designer colors. The optional RhinoHyde upholstery comes in five colors.

68. FLEXIPAC REUSABLE COMPRESSES

    FlexiPAC Reusable Compresses are hot and cold packs designed for use by individuals with arthritis, tendonitis, bursitis, and post-operative swelling and pain. FlexiPacs are non-toxic flexible gel packs that can be microwaved to provide soothing heat therapy or stored in the freezer to provide penetrating cold therapy. DIMENSIONS: 5 x 6 inches, 5 x 10 inches, or 10 x 14.75 inches.

69. GEL-MEDEX ULTRA

    The Gel-Medex Ultra is a gel floatation mattress surface designed for use by individuals at risk for pressure sores. Designed to be used on top of an existing mattress, this surface features four individual, self-contained gel compartments; quality foam; and a low-friction easy-to-clean nylon cover. DIMENSIONS: The standard model is 35 x 80 inches. Special order models are available in 60 x 80 inches or 60 x 84 inches. WARRANTY: Warranted for one year against any manufacturer defects.

70. GENUTRAIN (MODEL 3450)

    Intermittent compressive knee support. Circularly profiled viscoelastic silicone insert surrounds the patella. Insert can be removed to free patella from pressure. Available in several sizes to fit below knee circumferences of 9.75 inches to 17.25 and above knee circumferences of 13.75 inches to 21.25 inches. White or beige.

71. HANDISIZER

    The Handisizer is a finger and had exercuser designed for use by individuals with disabilities of the hand. This three-in-one device performs a variety of exercise functions and can be used to increase grip and hand/eye coordination. Latex resistance bands in extra heavy, heavy, medium, and light are included (three of each strength). OPTIONS: A set of 12 replacement bands is available.

72. HYDROCOLLATOR HEATING UNITS (MODELS SS-2, M-2, M-4, SS, E-1, & E-2)9

    The Hydrocollator Heating Units are designed to heat hot packs for use in therapeutic settings. All models are made of high-quality stainless steel and thermostatically controlled. Models SS-2, M-4, and M-2 are mobile units equipped with rubber swivel caster wheels. Model SS-2 includes eight standard size HotPacs (see also separate entry). Model M-2 is an intermediate size model with an extra large tank and 12 standard HotPacs (see entry). Model M-4 features an extra large tank, an oversized drain, and 24 standard HotPacs (see entry). Models SS, E-1, and E-2 are non-mobile. Model SS includes eight standard HotPacs (see entry). Model E-2 is a non-insulated unit with the capacity for Oversize HotPacs and includes two Oversize HotPacs, one Neck Contour HotPac, and three Standard HotPacs (see entry) Model E-1 fits on a desk, counter, or mobile stand (not included) and includes four Standard HotPacs. DIMENSIONS (HxWxL): Model SS-2 is 33 x 20.25 x 15.5 inches. Model M-2 is 33 x 26.25 x 15.5 inches. Model M-4 is 33 x 34 7/8 x 20 inches and requires 20 x 32 inches of floor space. Model SS is 17.5 x 17.5 x 15.5 inches. Model E-2 is 16.5 x 14 x 11 7/8 inches. Model E-1 is 15 x 12.5 x 8 inches. The casters on the mobile units are 3.75 inches in diameter. OPTIONS: Dial thermometer, wall-mounted towel rack, and an automatic timer switch.

73. HYDROCOLLATOR STANDS

    Hydrocollator Stands are mobile carts designed for use with hydrocollators, EKG equipment, Ultrasound equipment, or other therapy instruments. Each mobile stand is electro-welded, has rubber swivel-type casters, and stainless steel top shelves. Several models are available: Model MB-TD, Model MB, and Model MB-T. MODEL MB-TD: Designed specifically to accomodate ultrasound, high voltage or other electrotherapy products. The cart comes with a storage drawer and two shelves for lotions, towels, and other accessories. MODEL MB: This model is designed for stationary heating units by the manufacturer. The heating units are placed at the proper height to eliminate stooping and reaching. The stand has an upper and a lower shelf. MODEL MB-T: This stand has three shelves spaced to accomodate electrotherapy equipment and accessories. OPTIONS: For additional storage or preparation areas on the mobile stands,side racks are available which attach to either side of the the stands. Racks have either a solid stainless steel surface or spoked shelves. DIMENSIONS: Models MB-TD and MB-T are 18.75 x 16.75 x 29.5 inches; MB is 18.75 x 16.75 x 19.5 inches. The casters are 3 inches in diameter.

74. HYDROCOLLATOR STEAM PACKS

    The Hydrocollator Steam Packs are hot packs which, when immersed in hot water, become a hot, moist compress. The packs retains heat for 30 minutes. A variety of sizes and styles is available, with some models contoured specifically for use with the neck and knees/shoulders. DIMENSIONS: Standard Size (no. 1006) is 10 x 12 inches; Half Size (no. 1014) is 5 x 12 inches; the Neck Contour Pack (no.1002) is 24 inches long; Oversize (no. 1004) is 15 x 24 inches. Rectangular packs come in 10 x 18 (no. 1008) or 24 (no. 1010) inches. The Knee-Shoulder Pack (no. 1012) is 10 x 20 inches.

75. HYDROCOLLATOR TERRY CLOTH COVERS

    The Hydrocollator Terry Cloth Covers are hot pack covers designed to fit each of the Hydrocollator Steam Packs (see separate entry). The covers are made of traditional-weave terry cloth and are available in several styles. The standard cover features Velcro straps to prevent accidental unwrapping or slipping. Other models include a pocket-style cover with a foam-filled lining in institutional or home-use designs and a terry and vinyl model to prevent moisture bleeding. Extra vinyl covered pads are also available.

76. INTELECT HVP2 HIGH VOLT PORTABLE DIGITAL STIMULATOR

    The Intelect HVP2 High Volt Portable Digital Stimulator is a neuromuscular stimulator designed for use in therapeutic, clinical, or home settings for people with muscle spasms, poor circulation, or reduced range of motion. This single-channel monophasic unit offers dual intensity dial controls and pulsed high volt current. The frequency is adjustable from one to 1000 pulses per second and the voltage output is zero to 330 volts. POWER: Uses two nine-volt batteries or an alternating current (AC) line cord adapter (both included).

77. INTELECT HVP-HIGH VOLT PORTABLE STIMULATOR

    The Intelect HVP-High Volt Portable Stimulator is a neuromuscular stimulator designed for use in therapeutic, clinical, or home settings for people with muscle spasms, poor circulation, or reduced range of motion. This single-channel unit offers continuous or alternating modes and twin-peak, high-voltage pulsed current. The frequency is adjustable from one to 1000 pulses per second and the voltage output is zero to 330 volts. POWER: Uses two nine-volt batteries or an alternating current (AC) line cord adapter (both included).

78. INTELECT LEGEND STIMULATOR

    The Intelect Legend Stimulator is an interferential current stimulator designed for use in therapeutic settings. Available in two- or four-channel models, the lightweight stimulator offers interferential, premodulated, Rusian, and high volt waveforms. Features include a clear liquid crystal display (LCD), membrane overlays for selection of controls, and the ability to store start-up parameters.

79. INTELECT ULTRASOUND GEL

    The Intelect Ultrasound Gel is designed for therapeutic use. This non-greasy, non-staining, hypoallergenic gel enhances conductivity. The gel comes in a five liter jug and is packaged with a refillable dispenser bottle.

80. LUMBOTRAIN

    Elastic low back support. Attachment in front has two large grommets on each side of the closure tabs to insert fingers for good leverage in tightening the support. Velcro closure. /diamond shaped support in back with a removable silicone elastomer lumbosacral pad. 5 sizes fit waists 27.6 inches to 47.2 inches.

81. MALLEOTRAIN (MODEL 3150)

    Intermittent compressive ankle support with a viscoelastic insert for additional ligamentous support. Ankle is supported in a semiflexed position. Available in right and left versions. Several sizes fit ankles measuring from 6.75 inches to 10.5 inches in circumference. White or beige.

82. MANUTRAIN.

    Knitted bi-elastic wrist support. Visco elastic cushions are inserted to stabilize the wrist. May be worn during activity or exercise. Right or left, 5 sizes for wrists 5 1/2 to 7 1/2 inches.

83. MULTI-USE CART

    The Multi-Use Cart is a wheeled cart for therapy equipment designed for use in therapeutic and clinincal settings. Made of high-impact plastic, these carts are available with a choice of three shelves or a top shelf and a bottom shelf with a tub in place of the center shelf . The carts are also available with or without a power cord assembly with three electrical outlets. Standard features include non-slip surfaces and four swivel casters, two with locking brakes. OPTIONS: Electrical adapter with a 15-foot cord. DIMENSIONS (HxWxD): 33 x 18 x 24 inches or 35 x 18 x 24 inches. COLOR: Grey or black.

84. NEKROL

    The Nekrol is a cervical pillow designed for use by individuals with neck pain, disabilities, or injuries. This roll is designed to be postioned at the border of a standard pillow to provide support for the neck while enabling the head to be supported by the softer standard pillow. This roll pillow comes with a washable cotton cover. DIMENSIONS: 20 x 3 inches.

85. NIGHT ROLL

    The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Intended for overnight use, this toll ties around the user's waist to provide lumbar support while lying down. DIMENSIONS: 36 x 4 inches for 24 to 34 inch waists or 42 x 4 inches for 34.5 to 40 inch waists.

86. NYLATEX WRAPS

    The Nylatex Wraps are cold pack wraps designed to hold ColPaCs (see separate entry) in place. Velcro fasteners hold the wraps in position. DIMENSIONS: The wraps come in rolls varying in size from 2.5, 4, or 6 inches wide and 18, 36, or 48 inches long.

87. OMOTRAIN

    Knitted bi-elastic shoulder support for the treatment of tendonitis, bursitis and other painful conditions. Wide elastic strap figure 8 harness, adjustment buckles over lower part of sleeve and in the front of the shoulder strap on the unaffected arm. 6 sizes. Fit right or left.

88. OPTIFLEX

    OptiFlex is a continuous passive motion (CPM) device designed for use with individuals with lower extremity disabilities. This device is engineered with an extra-wide carriage to accommodate knee replacements or other knee injuries or disabilities. The unit offers progressive range of motion (ROM), an Oscillation Zone that replicates the benefits of active physical therapy protocols, a Fast Back mode that enables the knee to spend more time in working ROM by accelerating through non-working ROM, and a Comfort Zone button which allows the unit to continue working the affected limb at a reduced flexion angle limit when the pain threshold is reached. Additional features include context-sensitive help and a nine-language interface, backlit display and buttons for visibility, hyperextension (-10 degrees) to full knee flexion (120 degrees), and a carrying handle. A patient kit is also included. OPTIONS: Optiflex CPM Kit, AutoFlex CPM Kit, Danniger CPM Kit, Breg/Optiflex CPM Kit, 34-inch strap kit, storage rack, and a bed mount. DIMENSIONS: 37 inches long. WEIGHT: 28 pounds.

89. OPTIFLEX S

    The Optiflex S is a continuous passive motion (CPM) device designed for use with individuals with upper extremity disabilities. This compact self-contained unit folds for transport and storage and features an adjustable padded seat and back. The unit offers precise, anatomical motion with natural alignment, patented simple method of changing to right or left set-up, and an ergonomic rest for the unaffected arm. The hand-held computerized control uses an OptiCard, a compact chip card that stores individual user treatment data and compliance. The credit-card-size card slides into the controller to regulate precise angles, speed, and motion. OPTIONS: Sets of five OptiCards and a patient kit.

90. PARA-CARE PARAFFIN BATH

    The Para-Care Paraffin Bath is designed to provide therapeutic heat treatment for individuals with arthritis, bursitis, muscle spasms, and chronic joint inflamation. This low-profile bath enables the user to dip an extremity into the unit to be coated with wax that provides penatrating heat to the joint to relieve pain. The bath includes a choice of six pounds of unscented or wintermint scented wax. OPTIONS: Wax refills, Para-Care mitts, Para-Care booties, Para-Care liners for hands or feet, and wax remover.

91. PILLOW PERFECT CERVICAL ROLL

    The Pillow Perfect Cervical Roll is a cervical pillow designed for use individuals with neck pain or disabilities. This cylindrical roll pillow is filled with polyester fiber and fits under the neck. DIMENSIONS: 17 x 7 inches.

92. PILLOW PERFECT DOUBLE SUPPORT

    The Pillow Perfect Double Support is a pillow designed for individuals with neck pain or disabilities. These pillows are made of non-combustible foam and provide neck support for those who sleep on their backs with raised rounded edges at the top and bottom. The pillow is available in a choice of medium/firm or firm/extra firm. DIMENSIONS: 22 x 16 inches.

93. PILLOW PERFECT HOT / COLD CERVICAL SUPPORT

    The Pillow Perfect Hot/Cold Cervical Support is a combination cervical pillow and hot or cold pack designed for use by individuals with neck pain or disaqbilities. This C-shaped support is filled with polyester fiber and features a pocket to hold the included compress that may be heated or chilled. DIMENSIONS: The pillow is 17 x 11.5 inches and the compress is 5 x 6 inches.

94. PILLOW PERFECT PILLOW

    The Pillow Perfect Pillow is designed for individuals with neck pain or disabilities. These pillows have recessed centers and raised edges to provide cervical support in any position.The standard, gentle, mid-size, and petite models are filled with Fortrel fiber and the econo model is filled with 100 percent polyester. DIMENSIONS: The standard, gentle, and econo models are 24 x 16 inches. The petite model is 19 x 12 inches. The mid-size model is 22 x 15 inches.

95. PILLOW PERFECT TRAVELER

    The Pillow Perfect Traveler is a contoured pillow designed for use individuals with neck pain or disabilities. This U-shaped pillow is filled with polyester fiber and fits around the neck. DIMENSIONS: 18 x 9 inches.

96. PIVOTAL THERAPY SYSTEM

    The Pivotal Therapy System is a spine exerciser designed for use with individuals with back pain, injuries, or disabilities. The set includes an Occipivot, a cervical pivot, short thoracic pivot, standard thoracic pivot, lumbar pivot, and a large lumbar pivot. The components can be used individually to address specific needs or integrated to form a complete system of treatment. OPTIONS: The individual components are also sold individually.

97. PLYNTH, THE (MODELS 6484 & 6485)

    The Plynth is a treatment table designed for clinical use.These tables feature a powder-coated welded steel frames and high-density seamless cushions covered in Naugahyde. Both models have a shelf under the table area, manual elevating head sections, and a face opening. Model 6484 is a two-section model and model 6485 is a three-section model. OPTIONS: RhinoHyde upholstery. DIMENSIONS: Model 6484 is 28 x 76 x 30 inches and model 6485 is 28 x 75 x 30 inches. COLOR: The frame is white and the standard Naugahyde cushions are available in eight standard and six designer colors. The optional RhinoHyde upholstery is available in five colors.

98. PRESSSION

    PresSsion is an intermittent compression unit designed for use with individuals with lymphedema or chronic venous insufficiency. This system features self-sealing auto-valve hose sockets to ensure proper locking when in use and seal closure when not in use. All pumps can simultaneously inflate two garments. The Deluxe Pump offers uniform pressures from 30 to 100 mmHg and independent settings of inflation and deflation from five seconds to two minutes. The Sequential Pump moves fluid up the limb in stages, applying pressure segmentally from distsal to proximal. It offers varied pressure, adjustable from 30 to 100 mmHg and independent settings allow separate inflation and deflation tiimes from five seconds to two minutes. The Personal Model also offers adjustable pressure from 30 to 100 mmHg and inflation/deflation time can be set from five seconds to two minutes. PresSsion Garments are made of strong, lightweight nylon-reinforced polyurethane and feature a flexi-walled inflation socket with a specially-designed connector to ensure secure hose retention and prevent air shut-off even if the hose is kinked or flattened. Uniform garments are available for the foot and ankle, half leg, full leg, half arm, and full arm. Sequential garments are available in a three-chamber half leg, a six-chamber full leg, a three-chamber half arm, a six-chamber full arm, and six-chamber three-quarter leg. OPTIONS: Garment extenders.

99. PRESSURE REDUCTION WHEELCHAIR CUSHION

    The Pressure Reduction Wheelchair Cushion is an air and foam flotation seat cushion designed for use in wheelchairs. This cushion is made to accommodate the buttocks and the thighs while creating maximum pressure relief for the bony prominences. Pressure distribution is created by a layer of gel on top of a layer of foam with a Ventex Recovery 5 cover. The pressure in the pad is controlled by an air valve which allows the support pressure to be varied. DIMENSIONS: 18 x 17 x 4 inches.

100. PRO POWERPILLOW

     The Pro PowerPillow is a massager designed for use by individuals with neck pain, injury, or disabilities. This pillow is placed with the soft roller section under the neck to position the neck in a neutral position during therapeutic massage. The unit offers up/down and left/right massage motion and vibration may be added. POWER: Uses standard alternating current (AC). DIMENSIONS (LxHxW): 21 x 7 x 6.25 inches.

101. PRON PILLO (MODEL 4206)

     The Pron Pillo, model 4206, is a head positioner designed to support the head, neck, and shoulders when lying face down. It features a cut-out center.

102. STABILIZER

     The Stabilizer is an EMG feedback unit designed for use in exercise and therapy. The unit is placed under the person exercising in a reclined position to monitor the position of the lower back. The unit provides feedback when the abdominal muscles are not actively or effectively protecting the spine.

103. THERABAND HAND EXERCISE BALL

     The Theraband Hand Exercise Ball is a finger and hand exerciser designed for use by individuals with disabilities of the fingers and hands. This smooth-textured ball conforms to the palm of the hand as it is squeezed. Designed to strengthen the hand or to be used as a fidget activity to improve attention, this ball can be heated or cooled to add temperature sensation. Available in soft and extra-soft, the ball includes exercise ideas. DIMENSIONS: 2 inches in diameter. COLOR: Red (soft) or yellow (extra-soft).

104. THERMA-WRAP (MODELS 1088, 1086, 1084, 1089, & 1090)

     Therma-Wraps are hot and cold packs designed for use by individuals with arthritis, tendonitis, bursitis, and post-operative swelling and pain. These wraps feature pockets to hold FlexiPAC hot/cold packs (see also separate entry) and hook-and-loop closure. Each wrap includes FlexiPACs. Model 1088 is a hand mitt, model 1086 is an ankle/elbow wrap, model 1084 is an open patella knee wrap, model 1089 is a back wrap, and model 1090 is a shoulder wrap.

105. THERMOPHORE AUTOMATIC MOIST HEAT PACK UNITS (MODELS 055, 056, 074, & 077)

     Thermophore automatic heat packs provide moist heat treatment for temporary relief from pain and discomfort. These pads come in four sizes and can be used to treat every area of the body. The pads are made with a specially woven flannel cover that retains moisture from the air. Replacement flannel covers are available. The unit produces 180 degrees of heat. DIMENSIONS: 055 Standard is 14 x 27 inches, 056 Medium is 14 x 14 inches, and 077 Petite is 4 x 17 inches. WEIGHT: Shipping weight of 2 to 5 pounds.

106. THERMOPHORE MUFF

     The Thermophore Muff is a hand warmer designed for use by individuals with arthritis of the hand. This electric muff allows customization of heat intensity using the attached momentary switch and the unit draws moisture from the air to deliver moist heat. Velcro straps allow for fit adjustability. POWER: Uses standard household current. DIMENSIONS (WxL): 8 x 17 inches

107. TRACTION ACCESSORY PACKAGE (MODEL TXA-1)

     The Traction Accessory Package, model TXA-1, is a traction system designed for clinical use. This set can be used for pelvic or lumbar traction applications up to 200 pounds. The set includes one adjustable cervical traction halter, one heavy duty pelvic traction set, two TX pillows and covers, and a spreader bar.

108. TRE-CH3

     The TRE-CH3 is a powered elevating treatment table designed for clinical and therapeutic use. This table features powered height adjustment with a range that accommodates wheelchair access as well as gurneys. Standard features include foot pedal operation, a tilting headpiece with face opening, extending ankle rest, and a paper cutter/dispenser. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height adjusts from 20 to 37.5 inches. COLORS: The standard upholstery is offered in eight standard and six designer colors. The optional RhinoHyde upholstery is available in six colors.

109. TX-1 & TX-2 TRACTION UNITS

     The TX-1 Traction Unit is a mobile traction system and the TX-2 Traction Unit is a stationary traction system featuring an electronic, digital control console. These units offer selection of zero to two hundred pounds of traction and four modes of treatment: progressive intermittent, intermittent, static or progressive static. A progressive step selector allows prescribed traction pull to be obtained in 9 progressive steps. The treatment timer runs from 1 to 99 minutes. Remaining time is displayed by a lighted LED digital readout. Traction time selection is from 1 to 60 seconds, and the rest cycle time is selectable from 1 to 60 seconds. WEIGHT: 100 pounds.

110. TX-7 & TX-8 TRACTION UNITS

     The TX-7 Traction Unit is a mobile traction system and the TX-8 is a stationary traction system featuring dial controls. Traction from zero to two hundred pounds may be selected as can two modes of treatment,: intermittent or static. The treatment mode is chosen using the selector switch. A red indicator light is illuminated when the selected traction weight is reached. A treatment timer for one to sixty minutes, a traction timer for zero to sixty seconds, and a rest cycle time of zero to sixty seconds are included. OPTIONS: The TXL-17 Mobile Traction Accessory to stabilize the mobile unit with fixed-height (18 to 30 inches) treatment tables. WEIGHT: Each model weighs100 pounds.

111. TXC-1 TRACTION CHAIR

     The TXC-1 Traction Chair is a traction system featuring five positions. The chair reclines to angles of 0, 15, 25, 35, and 45 degrees and features vinyl upholstery and foam padding. Armrests, a foot platform, and four caster wheels are standard. DIMENSIONS: 20.5 inches wide x 35 inches high when erect and 45 inches long when at the 45-degree reclined position. WEIGHT: 70 pounds.

112. TXE-1 & TXF-1 TRACTION TABLE

     The TXE-1 and TXF-1 Traction Tables are powered traction tables designed for clinical use. These tables feature a progressive mode which enables traction to increase in increments and permits up to nine progressive steps. The electronic display shows digital poundage readouts up to 200 pounds. The pelvic/lumbar section separates smoothly, reducing friction during lumbar traction. These four-section tables have a head section that features a breathing slot and adjusts up or down 25 degrees. Model TXE-1 is available with or without casters and features electric height adjustment. OPTIONS: Spreader bars, nylon traction cord, line adjustment clamp with cord, line clamp, nylon pulley, and more. DIMENSIONS: The tops of both models are 28 x 78 inches. Model TXE-1 adjusts from 20 to 37 inches high. Model TXF-1 is a fixed height model of 32 inches from the top to the floor.

113. TXE-7 & TXF-7 TRACTION TABLE

     The TXE-7and TXF-7 Traction Tables are powered traction tables designed for clinical use. These tables feature intermittent and static modes, both with treatment times up to 60 minutes and a red light indicator shows when maximum poundage is reached. The pelvic/lumbar section separates smoothly, reducing friction during lumbar traction. Other features include an illuminated on/off switch and a head section with a breathing slot which adjusts up or down 25 degrees. Model TXE-1 is available with or without casters and features electric height adjustment. OPTIONS: Spreader bars, nylon traction cord, line adjustment clamp with cord, line clamp, nylon pulley, and more. DIMENSIONS: The tops of both models are 28 x 78 inches. Model TXE-1 adjusts from 20 to 37 inches high. Model TXF-1 is a fixed height model of 32 inches from the top to the floor.

114. UTC CART

     The UTC Cart is a wheeled cart for therapy equipment designed for use in clinical and therapeutic settings. This cart enables two electrotherapy devices to be stored for easy access. Features include a U-shaped base with casters and two angled shelves. DIMENSIONS: The cart is 30 inches high and each shelf is 18 inches wide x 16.75 inches deep.

115. VERSABATHSEAT

     The VersaBathSeat is a bath seat designed for use by individuals with mobility disabilities. The unit is adjustable and clamps to most bathtubs, locking with a large adjustment knob. The seat rotates 90 degrees to accommodate both right and left entry and enabling the user to sit on the seat outside the tub and rotate to enter; the process is reversed for exiting the tub. Handles on each side of the seat aid in transfers. This lightweight unit folds for transport and storage. OPTIONS: Hygenic spray assembly kit, back for seat, and safety belt.

116. VISCOHEEL

     Shoe insert for children and adults. Viscoelastic heel cushion comes in two styles. Form N is a heel wedge cushion of uniform height. Form K is a heel wedge cushion raised on one side. Available in sizes for children, women, and men.

117. VISCOPEDS

     Viscopeds are shoe inserts designed for wear by individuals with lower extremity disabilities. These therapeutic full-length insoles are made with non-compressible viscoelastic silicone that provides cushioning and shock reduction. Men's or women's small, medium, large, extra large, 1 extra large, and 2 extra large.

118. WELLNESS 1ST BACK SUPPORT

     The Wellness 1st Back Support is an industrial low back orthosis designed to help prevent injuries associated with heavy lifting and carrying tasks. The support helps the body control the forces encountered with lifting by providing firm support across the lower back and abdominal regions. The contoured design also helps remind workers they are in the process of lifting and encourages the use of proper lifting techniques. The belt features strong, non-slip Velcro closures and adjustable elastic suspenders. The unit is made of Spandex material and is hand washable. SIZES: Small, medium, large, extra large, extra extra extra large. COLOR: Black.

119. WELLNESS 1ST WOMEN'S CONTOUR BACK SUPPORT

     The Wellness 1st Women's Contour Back Supports are low back orthoses designed for use by women with low back pain, injury, or disabilities or to prevent injury from lifting. This wide support is contoured to accommodate the relationship of the waist to the hips, preventing riding up and keeping support in the lumbar region. Adjustable suspenders are included. SIZES: Extra small, small, medium, large, extra large, extra extra large, and extra extra extra large. COLOR: Black.