Stander Inc.

1615 Quail Way
Logan, Utah 84321
United States
Telephone: 800-506-9901 or 435-755-0453.
Fax: 435-787-2301.
Web: http://www.stander.com.
Email: sales@stander.com.

Products manufactured by Stander Inc. (listed alphabetically)

1. ASSIST-A-TRAY

   The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensure stability and protect floors. The tray supports up to 30 pounds. DIMENSIONS: The handle adjusts from 34 to 40 inches high and the tray adjusts from 26 to 32 inches high. The handle is 6 x 6 x 1.25 inches in diameter. The base adjusts from 20 to 36 inches long. CAPACITY: The handle supports 250 pounds. WEIGHT: 19.5 pounds. WARRANTY: Lifetime manufacturer's warranty.

2. BED CADDIE

   The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.

3. BED CANE

   The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed on either side of the bed and it is collapsible for transport and storage.

4. CAR CADDIE

   The Car Caddie is a car transfer aid designed for use by individuals with mobility disabilities. This figure-eight style aid is constructed of nylon and loops around the car door window frame. The cushioned grip provides security and assistance while entering and exiting the automobile.

5. CHILDREN'S BED RAIL AND SPORTS POUCH

   The Children's Bed Rail and Sports Pouch is a portable side rail designed for use by children with balance, mobility, or cognitive disabilities. Made of heavy-duty, poder-coated steel, the rail has a foam grip handle that folds for storage and transport. Reversible and adjustable for use on either side of the bed, this rail secures to the bed frame and mattress with the included safety strap. The included three-pocket organizer fits over the rail to prevent entrapment and provide storage. DIMENSIONS (HxW): The rail is 22 x 17 inches and the base is 21 x 17 inches. WEIGHT: 8 pounds. CAPACITY: 300 pounds.

6. COUCH CANE

   The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position. DIMENSIONS: Height adjusts from 29 to 32 inches. Fits couches or chairs with feet that are 21 to 33 inches apart. Handle is 15 inches wide. CAPACITY: 300 pounds. WEIGHT: 15 pounds.

7. FURNITURE RISERS

   Furniture Risers are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These leg extenders are designed to make sitting or rising from a couch or bed easier for the user. They are made of plastic with reinforced ribbed construction and include protective non-skid pads to protect the furniture and floor. DIMENSIONS: Raise furniture 3 or 4 inches when used as individual sets or 5 inches when stacked. The width of the 4-inch Risers is 5 inches at the base and 3.75 inches at the top. The width of the 3-inch Risers is 4.5 inches at the base and 3.75 inches at the top. CAPACITY: 350 pounds. WEIGHT: 2 pounds.

8. LEVER EXTENDER

   The Lever Extender is an extension handle for a recliner designed for use by individuals with upper extemity or balance disabilities. Made of heavy-duty padded steel, this handle attaches with four bolts to the existing handle used to raise the footrest of a recliner. DIMENSIONS (LxW): 9 X 7 inches. WEIGHT: 2 pounds.

9. METRO WALKER

   The Metro Walker is a folding adjustable wheeled walker designed for use by individuals with lower extremity or walking disabilities. This walker accommodates users from 4 feet, 10 inches to 6 feet, 8 inches tall and features large urethane front wheels, easy-glide rear feet, and handles with bicycle-style handgrips. This walker folds by raising the easy-release lever with one hand and opens by sliding the handles apart. Two pocket organizers to attach to the sides are included. DIMENSIONS: Folded, the walker is 6 x 4 x 32 inches. The height adjusts from 32 to 36 inches. The width is 19 inches. The wheels are 4 inches in diameter. CAPACITY: 250 pounds. WEIGHT: 6.5 pounds. COLOR: Regal rose, black walnut, or artesian amber. WARRANTY: Lifetime manufacturer's warranty.

10. METRO WALKER SKI GLIDES

    The Metro Walker Ski Glides are walker glide tips designed for use on back of a wheeled walker. These replacement ski glides are designed for use with the Metro Walker (see separate entry) or other walkers. These glides are designed to mover easily over most surfaces and are used to stabilize the walker and control the user's pace. DIMENSIONS: 2 x 1 x 2 inches. COLOR: Black.

11. SECURITY POLE

    The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Security Pole can be permanently installed with the wood screws that are included, if the user desires. The pole is equipped with a closed-cell foam, non-slip gripping surface. DIMENSIONS: The pole separates into two 53-inch sections for transport and storage. The unit fits ceilings 7 to 9 feet tall. An optional extension accommodates 10-foot ceilings. CAPACITY: 300 pounds. WEIGHT: 20 pounds. COLOR: Iceberg white or metallic black. WARRANTY: Lifetime manufacturer's guarantee.

12. SECURITY POLE & CURVE GRAB BAR

    The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Security Pole (sold separately; see separate entry) can be permanently installed with the wood screws that are included, if the user desires. The Curve Grab Bar (also sold separately; see entry) attaches to the pole and pivots 360 degrees. Eight locking positions enable the grab bar to be locked in position every 45 degrees for a multi-level hand hold. DIMENSIONS: The pole separates into two 53-inch sections for transport and storage. The unit fits ceilings 7 to 10 feet tall. CAPACITY: 300 pounds. WEIGHT: 20 pounds. COLOR: Iceberg white or metallic black. WARRANTY: Lifetime manufacturer's warranty.

13. STANDER CANE (MODELS 7500-R & 7500-L)

    The Stander Cane, models 7500-R and 7500-L, is a straight cane designed for use by individuals with balance, lower extremity, or walking disabilities. Available for right- or left-handed use, this cane has a shaft made of aircraft-grade aluminum, and the handle has an anatomic palm grip with a textured rubber top for cushioning and a secure grip. This cane also has a spring-loaded tip to reduce shock to the user's wrist. When not in use, the cane can be turned upside down and stood on the handle. A removable wrist strap is included. DIMENSIONS: The cane is 3.75 x 6.75 x 28 inches. The height adjusts from 30 to 39 inches in one inch increments (accommodates users from 54 to 78 inches tall). CAPACITY: 300 pounds. WEIGHT: 15.7 ounces.

14. STANDER CURVE GRAB BAR

    The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when installed is 40 inches. The horizontal base bar is 14 inches long; the curved handle is 18.75 inches long. All bars have a diameter of 1.25 inches. The unit extends 12.5 inches from the wall at the 90-degree position. WEIGHT: 12 pounds. CAPACITY: 300 pounds.

Products distributed by Stander Inc. (listed alphabetically)

1. HANDYBAR

   The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds.

2. MILLENNIAL ADVANTAGE CRUTCH, THE (MODELS MWD500 & MWD1000)

   The Millennial Advantage Crutch is a folding axillary crutch designed for use by individuals with walking or lower extremity disabilities. This spring-assisted ergonomic crutch features an underarm cradle, an ergonomic handgrip, and a power-assist shock-absorbing tip. These crutches fold in half for storage or transport. Model MWD500 fits persons 4 feet,6 inches tall to 5 feet, 7 inches tall and Model MWD1000 fits individuals 5 feet, 7 inches tall to 6 feet, 8 inches tall. CAPACITY: 400 pounds. WEIGHT: 7 pounds. COLOR: Grey, red, or blue.

See Stander Inc. products that are no longer available.