Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu

Express Ramps

PO Box 22697
Fort Lauderdale, Florida 37424
United States
Telephone: 866-491-1110 or 954-376-3241.
Fax: 423-373-1888.
Web: http://www.portable-wheelchair-ramps.com.
Email: info@expressramps.com.

Products distributed by Express Ramps (listed alphabetically)

  1. ALUMINIUM THRESHOLD RAMP Picture of ALUMINIUM THRESHOLD RAMP

    The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.

  2. ASCENSION VIRTUOSO (MODELS 4860P AND 5460P) Picture of ASCENSION VIRTUOSO (MODELS 4860P AND 5460P)

    The Ascension Virtuoso are portable wheelchair lifts designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. These lifts do not have an access ramp so that a person can enter it directly from street level. The lifts consist of a drive system, passenger platform and doors or gates, all mounted on casters for portability. The casters lock, and the lift will not operate when they are not locked. The platform is enclosed on four sides by transparent thermoplastic panels with steel frames. There are doors on two opposing sides. Safety features of this system include constant pressure operating switches; an emergency stop button at the passenger control station; electro-mechanical interlock to prevent accidental opening of lower landing side platform gate; switch to prevent platform movement if either gate is open; a plastic safety skirt that extends as platform is raised to cover moving parts; hydraulic hand pump that can raise and lower the lift without power; and self-closing gates. There are full-length grab bars on each wall and slip-resistant surfaces on the platform floor and dock plate. POWER: The direct-acting hydraulic drive requires a standard 120-volt wall outlet. Control and operating circuits are serviced by a 12-volt direct current (VDC) power supply. OPTIONS: Stanchion package for lift recall at floor and stage level; lift cover; larger casters for uneven or rough surfaces; stage guard for stages between 38 and 60 inches in height; backup power supply; alarm for passenger assistance request; and stairbridge for access over stairs. DIMENSIONS (LxW): The passenger platform is 48 x 36 inches (model 4860P) and 54 x 36 inches (model 5460P). The walls and gates are 43 inches high on both models. The lifts require a minimum space 44 inches wide for operation, storage or transport. No part of the lifts stand over 44 inches high while the platform is on the ground. Both lift’s maximum lifting height is 60 inches. SPEEDS: The lift moves at a vertical speed of 7 feet per minute. CAPACITY: 750 pounds. WEIGHT: 975 pounds (model 4860P); 1025 pounds (model 5460P). COLOR: Black is standard; other colors are optional. WARRANTY: 10 years on the drive train; 3 years on all other components; 1 year on labor.

  3. DOUBLE BAR HANDRAILS Picture of DOUBLE BAR HANDRAILS

    Double Bar Handrails are handrails designed for use on wheelchair ramps to provide support for users with balance or walking disabilities. The railings are made from galvanized or schedule 40 steel and are designed for permanent or semi-permanent installation. They come in sections which can be used individually or as a component of a larger ramp system. Double bar construction provides an added level of safety by adding a second support bar 16 inches below the handrail bar. Railings can be mounted directly onto the ramp system using bolts or they can be slid into receiver tubes which are welded onto the ramp system and secured by bolts or quick-release pins. The railings can be custom designed to meet a specific mounting requirement or they can be bolted to a cement pad using a mounting flange. In addition to ramps, the railings can also be used on stairways, platforms, bridges, or machine barriers. DIMENSIONS: Railings come in sections from 4 to 14 feet long.

  4. E-Z ACCESS RAMP (MODELS RAEZ0110, RAEZ0120, RAEZ0130, RAEZ0140, RAEZ1110, RAEZ1120, RAEZ1130, RAEZ1140, RAEZ1510, RAEZ1520, RAEZ1530, RAEZ1540, RAEZ2150, RAEZ2160, & RAEZ2170) Picture of E-Z ACCESS RAMP (MODELS RAEZ0110, RAEZ0120, RAEZ0130, RAEZ0140, RAEZ1110, RAEZ1120, RAEZ1130, RAEZ1140, RAEZ1510, RAEZ1520, RAEZ1530, RAEZ1540, RAEZ2150, RAEZ2160, & RAEZ2170)

    The E-Z Access Ramp is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a 1:12 slope and can be installed on any surface at interior or exterior thresholds. It has a slip-resistant, scuff-resistant surface, and can be cut to exact size and covered with carpet. DIMENSIONS (HxLxW): 7/8 x 6 x 42 inches (model RAEZ0110), 7/8 x 6 x 60.5 inches (model RAEZ0120), 7/8 x 6 x 69.5 pounds (model RAEZ0130), 7/8 x 6 x 78.5 inches (model RAEZ0140), 1.25 x 12.25 x 42 inches (model RAEZ1110), 1.25 x 12.25 x 60.5 inches (model RAEZ1120), 1.25 x 12.25 x 69.5 inches (model RAEZ1130), 1.25 x 12.25 x 78.5 inches (model RAEZ1140), 1.75 x 18 x 50 inches (model RAEZ1510), 1.75 x 18 x 60.5 inches (model RAEZ1520), 1.75 x 18 x 71 inches (model RAEZ1530), 1.75 x 18 x 81.5 inches (model RAEZ1540), 2 3/16 x 24 x 60 inches (model RAEZ2150), 2 3/16 x 24 x 72 inches (model RAEZ2160), or 2 3/16 x 24 x 84.5 inches (model RAEZ2170). WEIGHT: 7 pounds (model RAEZ0110), 9 pounds (model RAEZ0120), 10 pounds (model RAEZ0130), 15 pounds (model RAEZ0140), 16 pounds (model RAEZ1110), 23 pounds (model RAEZ1120), 27 pounds (model RAEZ1130), 30 pounds (model RAEZ1140), 40 pounds (model RAEZ1510), 49 pounds (model RAEZ1520), 58 pounds (model RAEZ1530), 66 pounds (model RAEZ1540), 75 pounds (model RAEZ2150), 90 pounds (model RAEZ2160), or 105 pounds (model RAEZ2170). DELIVERY TIME: 2 to 3 weeks.

  5. EZ-ACCESS MODULAR RAMP Picture of EZ-ACCESS MODULAR RAMP

    The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations. No anchoring into concrete footings or pads is required. Bottom and top transition plates are included. OPTIONS: Semicircular loops to connect the ends of a pair of handrails on one side of a ramp or ramp section. DIMENSIONS: Ramp components are available in lengths of 4, 6, 8 and 10 feet. The standard width is 3 feet. Custom lengths and widths are available. Turning landings are available in 4 x 5 feet and 5 x 5 feet. The ramp and platform supports can be raised and lowered in 1-foot increments. CAPACITY: 850 pounds. WARRANTY: 3-year limited warranty.

  6. EZ-ACCESS ROLLUP RAMP Picture of EZ-ACCESS ROLLUP RAMP

    The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 inches and a width of 30 inches. WEIGHT: 16 pounds. CAPACITY: 600 pounds. WARRANTY: 3-year limited warranty.

  7. EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR) Picture of EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR)

    The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches (model THR 250-1); 2.5 x 24 x 24 inches (model THR RISER 225-1 PR). CAPACITY: 850 pounds. WEIGHT: 40 pounds (model THR 250-1); 23.5 pounds per riser (model THR RISER 225-1 PR). WARRANTY: One-year limited warranty.

  8. EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1) Picture of EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1)

    The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides is 42 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds. WARRANTY: 1-year limited warranty.

  9. EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6) Picture of EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6)

    The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS6 only). Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle (except model AS2). OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 24 x 29.5 inches (model AS2); 36 x 29.5 inches (model AS3); 48 x 29.5 inches (model AS4); 60 x 29.5 inches (model AS5); and 72 x 29.5 inches (model AS6). Each half when separated is (HxLxW): 4.5 x 24 x 15 inches (model AS2); 4.5 x 36 x 15 inches (model AS3); 4.5 x 48 x 15 inches (model AS4); 4.5 x 60 x 15 inches (model AS5); and 4.5 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 12 pounds (model AS2); 16 pounds (model AS3); 20 pounds (model AS4); 26 pounds (model AS5); and 30 pounds (model AS6). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

  10. EZ-ACCESS SUITCASE RAMP (MODELS 2, 3, 4, 5 & 6) Picture of EZ-ACCESS SUITCASE RAMP (MODELS 2, 3, 4, 5 & 6)

    The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches (model 3); 48 x 29 inches (model 4); 60 x 29 inches (model 5); and 72 x 29 inches (model 6). Folded, the ramps are (HxLxW): 3 x 24 x 15 inches (model AS2); 3 x 36 x 15 inches (model AS3); 3 x 48 x 15 inches (model AS4); 3 x 60 x 15 inches (model AS5); and 3 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 11 pounds (model AS2); 15 pounds (model AS3); 21 pounds (model AS4); 26 pounds (model AS5); and 36 pounds (model AS6). WARRANTY: 3-year limited warranty.

  11. EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8) Picture of EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8)

    The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and when folded, the ramp has a built-in nylon carrying handle. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. The TLE is sold in pairs with each piece fastening to one half of the ramp. DIMENSIONS (LxW): 24 x 30 inches (model SS2); 36 x 30 inches (model SS3); 48 x 30 inches (model SS4); 60 x 30 inches (model SS5); 72 x 30 inches (model SS6); 84 x 30 inches (model SS7); and 96 x 30 inches (model SS8);. Folded (HxLxW): 3.75 x 24 x 15 inches (model SS2); 3.75 x 36 x 15 inches (model SS3); 3.75 x 42 x 15 inches (model AS4); 3.75 x 48 x 15 inches (model SS5); 3.75 x 60 x 15 inches (model SS6); 3.75 x 74 x 15 inches (model SS7); 3.75 x 86 x 15 inches (model SS8). Top Lip Extension (TLE) (HxLxW): 2.375 x 13.875 x 8.5 inches for each piece. CAPACITY: 800 pounds (all models). WEIGHT (per ramp section): 11 pounds (model SS2); 17 pounds (model SS3); 23 pounds (model SS4); 29 pounds (model SS5); 34 pounds (model SS6);41 pounds (model SS7); and 47 pounds (model SS8). WARRANTY: 3-year limited warranty.

  12. EZ-ACCESS THRESHOLD RAMP (MODELS 1, 1.5, 2, 3, 4, 5 & 6) Picture of EZ-ACCESS THRESHOLD RAMP (MODELS 1, 1.5, 2, 3, 4, 5 & 6)

    The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate thresholds 1, 1.5, 2, 3, or 4 inches high. DIMENSIONS (HxLxW): 1 x 6.5 x 34 inches (Model 1); 1.5 x 9.5 x 34 inches (Model 1.5); 2 x 12 x 34 inches (Model 2) 3 x 17 x 34 inches (Model 3); 4 x 22.25 x 34 inches (Model 4); 5 x 27.5 x 34 inches (Model 5); 6 x 32.75 x 34 inches (Model 6). CAPACITY: 600 pounds. WEIGHT: 3 pounds (Model 1); 5 pounds (Model 1.5); 5.5 pounds (Model 2); 8 pounds (Model 3); 11 pounds (Model 4); 15 pounds (Model 5); 20 pounds (Model 6). WARRANTY: 3-year limited warranty.

  13. EZ-ACCESS TRIFOLD ADVANTAGE SERIES RAMP (MODELS AS5, AS6, AS7, AS8 & AS10) Picture of EZ-ACCESS TRIFOLD ADVANTAGE SERIES RAMP (MODELS AS5, AS6, AS7, AS8 & AS10)

    The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle. The ramp can be carried in one or two pieces. The hinge with interlocking brackets provides smoother operation and reduced pinch points. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 60 x 29.5 inches (model AS5); 72 x 29.5 inches (model AS6); 84 x 29.5 inches (model AS7); 96 x 29.5 inches (model AS8); and 120 x 29.5 inches (model AS10). The folded dimensions are (HxLxW): 11.5 x 30.75 x 15 inches (model AS5); 11.5 x 36.25 x 15 inches (model AS6); 11.5 x 42.25 x 15 inches (model AS7); 11.5 x 48.75 x 15 inches (model AS8); and 11.5 x 60.75 x 15 inches (model AS10). CAPACITY: 800 pounds (all models). WEIGHT: 32 pounds (model AS5); 38 pounds (model AS6); 44 pounds (model AS7); 50 pounds (model AS8); and 60 pounds (model AS10). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

  14. MULTIFOLD RAMP (MODELS WCR530, WCR630, WCR730, WCR830, WCR1030, & WCR1230) Picture of MULTIFOLD RAMP (MODELS WCR530, WCR630, WCR730, WCR830, WCR1030, & WCR1230)

    The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR1230) long. Folded dimensions (HxLxW) are 8.5 x 34.5 x 16 inches (WCR530); 8.5 x 38.5 x 16 inches (WCR630); 8.5 x 44.5 x 16 inches (WCR730); 9 x 50.5 x 16 inches (WCR830); 9 x 62.5 x 16 inches (WCR1030); and 9 x 74.5 x 16 inches (WCR1230). CAPACITY: 300 pounds with single axle and 600 pounds with double axle (WCR530, WCR630, WCR730, WCR830) or 250 pounds with single axle and 500 pounds with double axle (WCR 1030, WCR1230). WEIGHT: 30 pounds (WCR530), 36 pounds (WCR630), 40 pounds (WCR730), 53 pounds (WCR830), 65 pounds (WCR1030), 74 pounds (WCR1230).

  15. PATHWAY LITE (MODELS AS2, AS3, AS4, AS5, AS6, AS7 & AS8) Picture of PATHWAY LITE (MODELS AS2, AS3, AS4, AS5, AS6, AS7 & AS8)

    The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (model AS8). The outside width for all models is 32.5 inches. CAPACITY: 600 pounds for all models. WEIGHT: 12 pounds (model AS2); 18 pounds (model AS3); 22 pounds (model AS4); 28 pounds (model AS5); 32 pounds (model AS6); 37 pounds (model AS7); and 42 pounds (model AS8). WARRANTY: 3-year limited warranty.

  16. PATHWAY MODULAR RAMP (MODELS PATHWAY CS4, CSHR4, CS6, CSHR6, CS8, CSHR8, CS10, & CSHR10) Picture of PATHWAY MODULAR RAMP (MODELS PATHWAY CS4, CSHR4, CS6, CSHR6, CS8, CSHR8, CS10, & CSHR10)

    The PATHWAY Modular Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of aluminum and feature an extruded non-skid surface. Models with the letters "CSHR" in their model number include two side rails. DIMENSIONS (LxW): 48 x 36 inches (models CS4 and CSHR4); 72 x 36 inches (models CS6 and CSHR6); 96 x 36 inches (models CS8 and CSHR8); 120 x 36 inches (models CS10 and CSHR10). The outside width for ramps without handrails (models CS4, CS6, CS8 and CS10) is 37 inches; the outside width for ramps with handrails (models CSHR4, CSHR6, CSHR8, and CSHR10) is 40.25 inches. The height of the ramps with handrails is 35.75 inches. CAPACITY: 850 pounds for all models. WEIGHT: 45 pounds (model CS4); 70 pounds (model CSHR4); 60 pounds (model CS6); 85 pounds (model CSHR6); 75 pounds (model CS8); 105 pounds (model CSHR8); 90 pounds (model CS10); and 130 pounds (model CSHR10).

  17. RESIDENTIAL VERTICAL LIFT Picture of RESIDENTIAL VERTICAL LIFT

    The Residential Verical Lift is a home elevator designed for use by wheelchair users and individuals with balance, lower extremity, or mobility disabilities. This elevator comes fully assembled and can be used indoors or outdoors. It can be disassembled into three components (the legs, the carrier, and the tower) for installation in a house with narrow doorways. It has an alternating current (AC) motor with a screw drive; keyed, constant pressure controls and emergency stop; weather-resistant switches and controls; top and bottom limit switches; an automatic folding ramp; and a non-skid platform with solid side walls, a safety plate, a solid handrail, and keyed controls. OPTIONS: Tall Tower adjacent access platform; left- or right-side upper landing gate; anchor bolt kit; top or bottom keyed call/send control. POWER: Uses household AC outlet. Direct current (DC) power and battery are optional. DIMENSIONS (LxW): Platform is 54 x 34 inches with 36 inch high side walls. The folding ramp is 16 inches long. CAPACITY: 750 pounds.

  18. RUBBER THRESHOLD RAMP Picture of RUBBER THRESHOLD RAMP

    The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch rise).

  19. SUITCASE RAMP (MODEL RAMP-SF) Picture of SUITCASE RAMP (MODEL RAMP-SF)

    The Suitcase Ramp, model RAMP-SF, is a folding portable ramp designed for use by individuals who use wheelchairs. The ramp's surface has a serrated grip with debris slots. The ramp folds for transportation. DIMENSIONS (LxW): 72 x 28 inches. CAPACITY: 500 pounds. WEIGHT: 33 pounds.

  20. SUITCASE RAMPS Picture of SUITCASE RAMPS

    Suitcase Ramps are portable ramps designed for use by individuals with mobility disabilities. These hinged tracks have a non-skid surface and cover gaps, curbs, and steps. A nylon carrying case is included. DIMENSIONS: All models are 30 inches wide. These ramps are available in 3, 4, or 5 foot lengths. WEIGHT: The 3 foot model weighs 15 pounds, the 4 foot model weighs 21 pounds, and the 5 foot model weighs 26 pounds.

  21. SUITCASE RAMPS Picture of SUITCASE RAMPS

    The Suitcase Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair or scooter access over curbs, steps, and doorways. The ramp accomodates wheelchairs and scooters with various wheel configurations. To operate, the hinged ramp is unfolded and positioned for maximum safety and support. Its single-fold design allows it to be folded in half lengthwise to be carried like a suitcase when not in use. The ramp includes a built-in handle except in the 2-foot-long size. It is made of aircraft-grade aluminum with an extruded, non-skid driving surface. DIMENSIONS (LxW): 24 x 29, 36 x 29, 48 x 29, 60 x 29, or 72 x 29 inches. CAPACITY: 600 pounds. WEIGHT: 11 to 36 pounds depending on length.

  22. THRESHOLD RAMP Picture of THRESHOLD RAMP

    The Threshold Ramp is an accessible threshold designed to enable wheelchair users to get through dooways and over thresholds. This low profile aluminum unit can adapt a doorway or threshold from 1 to 4 inches in height. Its top lip seamlessly covers the existing threshold for a smooth transition. The ramp is constructed from welded aluminum with a permanent skid resistant surface, and can be used indoors or outdoors. DIMENSIONS (LxW): 6, 12, 18, 24, or 36 x 30 or 36 inches. WEIGHT: 6 to 28 pounds depending on size.

  23. VERTICAL PICKET HAND RAILS Picture of VERTICAL PICKET HAND RAILS

    Handi-Ramp Vertical Picket Hand Rails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of high-grade galvanized or schedule 40 steel, these rails have vertical pickets for safety. They can be mounted onto a Handi-Ramp ramp system by bolting them on or by sliding them into receiver tubes which are welded onto the system, and are secured by bolts or quick- release pins. Therails are available with or without a ramp system. DIMENSIONS: Pickets are spaced less than 4 inches apart.

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.