Swan Corporation

515 Olive St.
Suite 1800
St. Louis, Missouri 63101
United States
Telephone: 800-325-7008.
Fax: 314-231-8165.
Web: http://www.swanstone.com.
Email: infomail@swanstone.com.

Products manufactured by Swan Corporation (listed alphabetically)

1. BARRIER FREE SHOWER FLOOR RAMP (MODEL BF-1260)

   The Barrier Free Shower Floor Ramp, model BF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The unit coordinates with Swanstone shower and bath systems. This ramp has a slip-resistant surface, and on its reinforced solid surface, color and texture run all the way through and cannot wear away. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Available in 37 different colors.

2. BARRIER FREE SHOWER FLOOR RAMP (MODEL FBF-1260)

   The Barrier Free Shower Floor Ramp, model FBF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The ramp is made of Veritek, and it can be installed without grout. This unit coordinates with the Swanstone shower and bath systems. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Bisque, bone, or white.

3. BARRIER-FREE GRAB BAR (MODELS BF-2448 & GB-1432)

   The Barrier-Free Grab Bar is a shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This L-shaped stainless steel grab bar is for use when a shower seat is installed on either side. DIMENSIONS: 14 x 32 inches (model GB-1432) or 24 x 48 inches (model BF-2448).

4. BARRIER-FREE GRAB BAR (MODELS BF-5024 & BF-5048)

   The Barrier-Free Grab Bar is a wall grab bar for shower designed for use by individuals with balance or mobility disabilities. This straight stainless steel grab bar can be used on side walls when a shower seat is installed on the back wall of a shower. DIMENSIONS: Length is 24 inches (model BF-5024) or 48 inches (model BF-5048).

5. SWANSTONE BARRIER FREE FOLDING SHOWER SEAT (MODEL BF-2300)

   The Swanstone Barrier-Free Folding Shower Seat, model BF-2300, is a folding corner shower seat designed for use by individuals with balance or mobility disabilities. Two seat styles fit the back wall or either side wall (left or right). DIMENSIONS (DxW): 23 1/3 x 22.5 inches. CAPACITY: 250 pounds.

6. TRANSFER SHOWER FLOOR (MODELS FTS-3738 & STS-3738)

   The Transfer Shower Floor is a floor for an accessible shower stall for individuals with mobility disabilities. The floor is designed to allow transfers from a wheelchair to a shower seat (not included). The floor has a pebbled, slip-resistant surface. Because it is made from a reinforced solid surface, it has no grout to clean and does not mold or mildew. The color and texture run all the way through and cannot wear away. The floor is made of Veritek (model FTS-3738) or Swanstone (model STS-3738). DIMENSIONS (DxW): 37 x 38 inches. COLOR: Both models are available in white, bone, or bisque. Model SBF-3060L/R is also available in Almond Galaxy, Arctic granite, barley, Bermuda sand, gray granite, green pasture, Sierra, Tahiti blue, Tahiti Desert, Tahiti Evergreen, Tahiti gray, Tahiti ivory, Tahiti Matrix, Tahiti rose, Tahiti sand. Tahiti Terra, Tahiti white, cornflower, Ironweed, Night Sky. purple sage, Wild Indigo, winter wheat, Indian Grass, pebble, or seafoam.

7. TUB WALL KIT (MODELS HA-58 & GN-58)

   The Tub Wall Kit, models HA-58 and GN-58, is a bathtub enclosure designed for use by individuals with balance or moblity disabilities. The walls include low-set soap dishes and are suitable for grab bar installation. Model HA-58 has a bright, glossy surface that comes from a durable, baked-on finish; its design keeps shower head spray from aiming at seams. Model GN-58 is made of Veritek, which has a granite appearance with no surface coating so its color runs throughout. The walls do not mold or mildew and can be used for remodeling projects or new construction. OPTIONS: Window Trim Kit (model WTK-1). DIMENSIONS (HxDxW): Fits tub areas 58 x 30 x 60 inches or smaller. COLOR: For model HA-58, white, bone, or bisque. For model GN-58, white, bone, bisque, Bermuda sand, gray granite, or Tahiti Desert.

8. UNIVERSAL DESIGN SHOWER FLOOR (MODELS FBF-3060L/R & SBF-3060L/R)

   The Universal Design Shower Floor, models FBF-3060L/R and SBF-3060L/R, is a roll-in shower floor designed for use by individuals who use wheelchairs. The floor has a pebbled, slip-resistant surface. It is available with a left- or right-hand drain and can be recessed for flush mounting or used with a ramp (not included). The floor is made of Veritek, a reinforced solid surface (model FBF-3060L/R) or from Swanstone solid surface (model SBF-3060L/R). Reinforced solid surface means color and texture run all the way through and cannot wear away. OPTIONS: Aluminum removable threshold (model BF-6000); ramp (model BF-1260). DIMENSIONS (DxW): 30 x 60 inches. COLOR: Both models are available in white, bone, or bisque. Model SBF-3060L/R is also available in Almond Galaxy, Arctic granite, barley, Bermuda sand, gray granite, green pasture, Sierra, Tahiti blue, Tahiti Desert, Tahiti evergreen, Tahiti gray, Tahiti ivory, Tahiti Matrix, Tahiti rose, Tahiti sand. Tahiti Terra, Tahiti white, cornflower, Ironweed, night sky. purple sage, W wild indigo, winter wheat, Indian grass, pebble, or seafoam.