Adaptmy.com

95 West Dudley Town Road
Bloomfield, Connecticut 06002
United States
Telephone: 866-993-0783 or 860-683-4442.
Fax: 860-243-1910.
Web: http://www.adaptmy.com.
Email: info@adaptmy.com.

Products distributed by Adaptmy.com (listed alphabetically)

1. 2-WAY LIFT CHAIR (MODEL 70556)

   The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. The seat (LxW) is 20 x 21 inches. The power cord is 9 feet long. CAPACITY: 375 pounds. COLORS: Tan, cocoa, blue, mauve, or evergreen. WARRANTY: Included. DELIVERY TIME: 2 to 4 weeks.

2. ADJUSTABLE BATH BENCHES (MODELS 9010 & 9020)

   The Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance, or cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a molded back, the bench has a plastic seat and back with multiple drainage holes and is equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches high x 11x 19 inches. CAPACITY: Weight capacity is 300 pounds.

3. ADJUSTABLE ROUND SHOWER STOOL

   The Adjustable Round Shower Stool is a shower stool designed for use by individuals with mobility and balance disabilities. Designed for use in narrow tubs and places where a regular tub seat does not fit. It is equipped with slip-resistant rubber tips and adjustable aluminum legs are flared to provide a stable base. DIMENSIONS (HxDxW): 15.5 x 13.5 x 13.5 inches. The height adjusts from 15.5 to 20.5 inches in 1-inch increments. CAPACITY: 250 pounds. WEIGHT: 2 pounds 10 ounces.

4. ADVANTAGE-RAIL SYSTEM

   The Advantage-Rail System is a standing transfer aid designed for use by individuals with mobility and balance disabilities. Intended for use beside the bed, toilet, or bathtub, the unit consists of a height-adjustable support rail with a padded horizontal handle and a floor plate. The rail fits in the low-profile floor plate with a push-down-and-turn motion, allowing the rail to be used in multiple locations. With a gentle lift, the handle pivots with the user to assist in taking small steps for safe transfers. When the handle is released, it locks in position to aid the user to a seated position. OPTIONS: Additional floor plates are available to enable the system to be used in multiple locations. DIMENSIONS: The height adjusts from 30 to 38 inches. CAPACITY: 250 pounds.

5. AQUATEC BELUGA BATH LIFT

   The Aquatec Beluga Bath Lift is a powered bath lift designed for use by individuals with mobility disabilities. This battery powered lift lowers to 2.5 inches from the bottom of the tub, then its back support reclines 35 degrees. To return to the top, the back comes to the upright position and the lift rises to the top of the tub. The lift is operated with a push button hand control. A red safety light glows when there is not enough charge in the battery to run the lift for a full cycle, and a safety circuit prevents the lift from lowering if there is not enough charge to raise it again. The lift has machine washable, removable covers made from blown PVC, and can be used with or without these covers. OPTIONS: Head support; sand wedge cushion to elevate the knees; rotary seat with transfer board; height adapter for deeper tubs; nylon carrying bag. POWER: Uses a rechargeable battery.

6. ASSISTA-RAIL

   The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-Latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends along the side of the bed 18 inches. OPTIONS: Assista-Cane handle, extension leg for Assista-Cane, and Bed Pocket. CAPACITY: 250 pounds. COLOR: White with grey grip.

7. BATH CUSHION-AIR LOWERING (MODEL 71412)

   The Bath Cushion - Air Lowering, model 71412, is a pneumatic bath lift designed for use by individuals with mobility or balance disabilities. This cushion deflates to lower the user to the bottom of the bath. When the user is done bathing, the cushion re-inflates using its compressor to lift the user back up to the top of the bath. The lift has a carrying handle for portability. For safety, the lift does not lower a user into the bath unless there is sufficient battery power to raise the user back out again. The lift can be used with a right or left hose. DIMENSIONS (HxDxW): 0.75 to 15.75 x 17.5 x 23 inches. CAPACITY: 330 pounds. WEIGHT: 4.5 pounds.

8. BED CANE

   The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed on either side of the bed and it is collapsible for transport and storage.

9. COMFORT BATHER BATH LIFT (MODEL MAU-200140)

   The Comfort Bather Bath Lift, model MAU-200140, is a bath lift designed for use by individuals with balance, mobility, or lower extremity disabilities. This motorized portable bath lift features an inflatable seat and back support, air pump, and a waterproof floating hand control. The user can raise and lower the lift using the hand control, and the unit is lowered to the bottom of the tub for bathing and raised to the top of the tub for exiting. A safety feature prevents lowering of the lift unless there is sufficient battery power to raise it back up to tub level. There is no installation required. The inflatable seat and back support connect to the air pump and can be placed in a sitting or reclining position. POWER: Uses rechargeable batteries. DIMEMSIONS (LxW): Seat is 23 x 17.5 inches. CAPACITY: 300 pounds. WEIGHT: 4.5 pounds.

10. COMMERCIAL DOUBLE BOWL KITCHEN SINK (MODEL 22129)

    The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall countertop dimensions are 22 x 33 inches. The drain opening is 3.5 inches in diameter. WEIGHT: 16.3 pounds. WARRANTY: 5 year warranty against material or manufacturing defects.

11. COMMERCIAL SINGLE BOWL KITCHEN SINK (MODELS 22130 & 22131)

    The Commercial Single Bowl Kitchen Sink is an accessible sink designed for use by individuals who use wheelchairs. The bowl has a recessed drain opening located at the left rear (model 22130) or right rear (model 22131) to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Bowl is 5.5 x 16 x 21 inches. The cut out is 24 3/8 x 21 3/8 inches, with a 3/8 corner radius. The drain opening is 3.5 inches in diameter. WEIGHT: 12 pounds. WARRANTY: 5 year warranty against material or manufacturing defects.

12. CONTEMPORARY STYLED TRANSFER BENCH (MODEL 77356)

    The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010); Basket Attachement (model 77011); and, a set of 2 handles (model 77012). DIMENSIONS (HxDxW): 17 to 21 x 19.25 x 33.25 inches. CAPACITY: 300 pounds. WARRANTY: Limited lifetime warranty.

13. CORNER GUARD (MODEL DL2528)

    The Corner Guard, model DL2528, is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors prevent chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. These protectors are made from durable plastic molded to fit over corner edges. They come with three screw holes pre-drilled on each side. DIMENSIONS: 48 inches high x 1/16 inch thick x 2.5 inches wide on each side. COLOR: Clear.

14. DEPENDA-BAR

    The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bathtub walls of any construction (fiberglass, plastic, tile wall, etc.). The bolt pattern is compatible with the WingIts Fastening System (sold separately) if wall stud spacing does not allow for direct mounting. OPTIONS: Plastic bath board. DIMENSIONS: The pivoting rail is 30.5 inches high and one-quarter inch in diameter. The P-shaped dual rail extends 18 in length from the bathtub wall with 6-inch spacing between horizontal rails. The horizontal fixed grab bar is available in 18 or 32 inches long. CAPACITY: 250 pounds. COLOR: White or stainless steel.

15. DOOR HINGE EXPANDABLE (MODEL 10654)

    The Door Hinge Expandable is a door hinge designed to widen doorway openings for wheelchair users. The hinge adds two inches to any doorway opening. The hinges are installed using existing hinge holes and screws. DIMENSIONS (LxW): 3.5 x 2 inches.

16. DOOR PROTECTION KICK PLATE (MODEL 194S)

    The Door Protection Kick Plate, model 194S, is a protective panel designed to protect a door from wheelchair-related damage. The plate is available in 0.05-inch gauge aluminum, brass, bronze, or stainless steel with six 0.63-inch truss head screws. OPTIONS: Self-adhesive tape; Spanner head screws; Torx head screws; counter sunk hole. DIMENSIONS: 8, 10, or 12 inches high, with custom width 2 inches less than door width.

17. DURO-MATIC DOOR HINGE

    The Duro-Matic Door Hinge is designed to provide easier access through narrow doorways for people who use wheelchairs. Replacing the existing hinges with these brass hinges adds two inches of clear space to the doorway. INSTALLATION: Uses the existing screws and holes.

18. ESSENTIAL BATH SAFETY PLUS ADJUSTABLE TOILET SAFETY RAILS (MODEL B5040)

    Essential Bath Safety Plus Adjustable Toilet Safety Rails, model B5040, is an adjustable safety frame designed for use by individuals with lower extremity or balance disabilities or arthritis. This unit consists of a height-adjustable anodized aluminum frame with full-length waterfall arms. A locking bracket attaches under the existing toilet seat

19. EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR)

    The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches (model THR 250-1); 2.5 x 24 x 24 inches (model THR RISER 225-1 PR). CAPACITY: 850 pounds. WEIGHT: 40 pounds (model THR 250-1); 23.5 pounds per riser (model THR RISER 225-1 PR). WARRANTY: One-year limited warranty.

20. EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1)

    The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides is 42 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds. WARRANTY: 1-year limited warranty.

21. EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6)

    The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS6 only). Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle (except model AS2). OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 24 x 29.5 inches (model AS2); 36 x 29.5 inches (model AS3); 48 x 29.5 inches (model AS4); 60 x 29.5 inches (model AS5); and 72 x 29.5 inches (model AS6). Each half when separated is (HxLxW): 4.5 x 24 x 15 inches (model AS2); 4.5 x 36 x 15 inches (model AS3); 4.5 x 48 x 15 inches (model AS4); 4.5 x 60 x 15 inches (model AS5); and 4.5 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 12 pounds (model AS2); 16 pounds (model AS3); 20 pounds (model AS4); 26 pounds (model AS5); and 30 pounds (model AS6). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

22. EZ-ACCESS SUITCASE RAMP (MODELS 2, 3, 4, 5 & 6)

    The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches (model 3); 48 x 29 inches (model 4); 60 x 29 inches (model 5); and 72 x 29 inches (model 6). Folded, the ramps are (HxLxW): 3 x 24 x 15 inches (model AS2); 3 x 36 x 15 inches (model AS3); 3 x 48 x 15 inches (model AS4); 3 x 60 x 15 inches (model AS5); and 3 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 11 pounds (model AS2); 15 pounds (model AS3); 21 pounds (model AS4); 26 pounds (model AS5); and 36 pounds (model AS6). WARRANTY: 3-year limited warranty.

23. EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8)

    The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and when folded, the ramp has a built-in nylon carrying handle. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. The TLE is sold in pairs with each piece fastening to one half of the ramp. DIMENSIONS (LxW): 24 x 30 inches (model SS2); 36 x 30 inches (model SS3); 48 x 30 inches (model SS4); 60 x 30 inches (model SS5); 72 x 30 inches (model SS6); 84 x 30 inches (model SS7); and 96 x 30 inches (model SS8);. Folded (HxLxW): 3.75 x 24 x 15 inches (model SS2); 3.75 x 36 x 15 inches (model SS3); 3.75 x 42 x 15 inches (model AS4); 3.75 x 48 x 15 inches (model SS5); 3.75 x 60 x 15 inches (model SS6); 3.75 x 74 x 15 inches (model SS7); 3.75 x 86 x 15 inches (model SS8). Top Lip Extension (TLE) (HxLxW): 2.375 x 13.875 x 8.5 inches for each piece. CAPACITY: 800 pounds (all models). WEIGHT (per ramp section): 11 pounds (model SS2); 17 pounds (model SS3); 23 pounds (model SS4); 29 pounds (model SS5); 34 pounds (model SS6);41 pounds (model SS7); and 47 pounds (model SS8). WARRANTY: 3-year limited warranty.

24. EZ-ACCESS THRESHOLD RAMP (MODELS 1, 1.5, 2, 3, 4, 5 & 6)

    The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate thresholds 1, 1.5, 2, 3, or 4 inches high. DIMENSIONS (HxLxW): 1 x 6.5 x 34 inches (Model 1); 1.5 x 9.5 x 34 inches (Model 1.5); 2 x 12 x 34 inches (Model 2) 3 x 17 x 34 inches (Model 3); 4 x 22.25 x 34 inches (Model 4); 5 x 27.5 x 34 inches (Model 5); 6 x 32.75 x 34 inches (Model 6). CAPACITY: 600 pounds. WEIGHT: 3 pounds (Model 1); 5 pounds (Model 1.5); 5.5 pounds (Model 2); 8 pounds (Model 3); 11 pounds (Model 4); 15 pounds (Model 5); 20 pounds (Model 6). WARRANTY: 3-year limited warranty.

25. FRANKLIN BRASS TUB & SHOWER SEAT (MODEL FB595)

    The Franklin Brass Tub & Shower Seat, model FB595, is a portable bath seat and shower bench designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. Fitting standard tubs and showers, this unit has a molded plastic seat on a tube frame with non-slip rubber feet. DIMENSIONS (DxWxH): Seat area is 12 x 20 x 16 inches. The leg tip spacing is 14 inches deep x 18.62 inches wide. The tube diameter is 1 inch. CAPACITY: 250 pounds. COLOR: White.

26. GENTEX CORDLESS SMOKE DETECTOR WITH VISUAL SIGNALING APPLIANCE (MODEL 71001)

    The Gentex Cordless Smoke Detector with Visual Signaling Appliance, model 71001, is a smoke alarm designed for use by individuals who are deaf or hard of hearing. This device features a 90 decibel horn and a built-in 177 candela strobe light, both of which are activated when smoke is detected. Flashing lights will stay on and the horn will continue as long as smoke exists. The unit also has a three-position full-function test switch. POWER: This unit plugns into a standard electrical outlet and has a nine-foot cord. Battery backup is optional.

27. GENTEX 7109LS

    The Gentex 7109LS is a portable photoelectric smoke alarm designed for use by individuals with hearing disabilities. This portable alarm features a strobe light with red "FIRE" lettering and a 90decibel (dB) audible signal, a full-function test switch. The high intensity strobe has a 177 candela rating and flashes 60 times per minute. Hardware is included for mounting on a wall if portability is not necessary. POWER: Plugs into standard wall outlet. Battery backup is provided for the audible signal only. WARRANTY: One-year warranty.

28. GLIDE-OUT SHELVES

    Glide-Out Shelves are slide out drawers for cabinets designed for use by individuals who use wheelchairs or who have limited reach. Shelving is custom-built to fit existing cabinets in the kitchen, pantry, bathroom, entertainment center, office, laundry room, or workshop. The shelving glides in and out at a touch, with full extension rails to maximize accessibility and space. Special solutions include blind corners, center stile removal and replacement, custom dividers, riser units for under sinks, trash bins, and tray bins. Shelves are made of Baltic birch and can hold items up to 100 pounds. WARRANTY: Lifetime guarantee on parts and labor.

29. GREAT GRABZ HORIZON GRAB BARS

    Great Grabz Horizon Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bars are designed to be stylish for residential use. DIMENSIONS: 10, 24, 36, or 42 inches long. Distance from wall to bar is 2.5 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

30. GREAT GRABZ SPLASH PEAK GRAB BAR

    The Great Grabz Splash Peak Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern design that rises to a peak, making one end higher than the other; concealed mounting; and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 24 or 36 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. The offset/rise is 3 inches. The flange is 3 inches in diameter. COLOR: Stainless, polished stainless, white powder coat, almond powder coat, or oil rubbed bronze. WARRANTY: 5-year limited warranty on defects, workmanship, and finish.

31. GREAT GRABZ SPLASH PLATEAU GRAB BAR

    The Great Grabz Splash Plateau Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern linear design, concealed mounting, and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 12, 24, 36, or 48 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. COLOR: Stainless, polished stainless, white powder coat, almond powder coat, or oil rubbed bronze. WARRANTY: 5-year limited warranty on defects, workmanship, and finish.

32. GREAT GRABZ WAVE GRAB BARS

    Great Grabz Wave Grab Bars are wall grab bars designed for residential use by individuals with balance or mobility disabilities. The bar has a decorative wave shape. DIMENSIONS: Length is 24 or 36 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

33. HANDS-FREE HAIR DRYER STAND 2000 (MODEL 6475)

    The Hands-Free Hair Dryer Stand 2000, model 6475, is a hair dryer holder designed for use by individuals with upper extremity disabilities or arthritis. This free-standing device features a v-shaped base that can be placed on a table or counter top, and a flexible gooseneck that can adjusted to any angle from its tabletop base. The stand holds the hair dryer (not included) in a foam- padded clamp at the top of the flexible gooseneck. The dryer is then stabilized, leaving the hands free to manipulate styling instruments.

34. HANDSHOWER WITH FLEXIBLE HOSE

    The Handshower with Flexible Hose is an attachment for standard shower heads. A tub spout adapter is available.

35. INVISIA ACCENT RING

    The Invisia Accent Ring is a curved wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This stainless steel bar forms a three-quarter circle and is contoured to fit around circular shower and bathtub control fixtures. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome

36. INVISIA CORNER SHELF

    The Invisia Corner Shelf is a corner shelf for shower with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a triangular Dupont Corian shelf with a curved stainless steel grab bar in front. This unit has concealed mounting screws and two points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome.

37. INVISIA SERENASEAT

    The Invisia SerenaSeat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. This seat has a Brazilian walnut seat and back and an aluminum frame. Brazilian Walnut is naturally resistant to moisture, mildew and decay. The removable backrest conceals the screws of the mounting brackets. The seat folds up when not in use. DIMENSIONS: Folded, the seat has a 3-inch profile. Open, the seat is 18 x 15 x 15 inches. The mounting brackets are 15 inches. CAPACITY: 450 pounds. COLOR: Natural Brazilian walnut and chrome or brushed nickel.

38. INVISIA SOAP DISH WITH INTEGRATED SAFETY RAIL GRAB BAR

    The Invisia Soap Dish with Integrated Bath Safety Rail Grab Bar is a soap holder with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a removable round Dupont Corian soap dish surrounded by a circular stainless steel grab bar. This unit has concealed mounting screws and three points of contact with the wall. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

39. INVISIA TOILET ROLL HOLDER

    The Invisia Toilet Roll Holder is a toilet paper roll holder with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises an inverted horseshoe shaped stainless steel grab bar with a toilet paper holder and two Dupont Corian shelves for storing extra tissue rolls and other items. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

40. INVISIA TOWEL BAR WITH INTEGRATED SAFETY RAIL / GRAB BAR

    The Invisia Towel Bar with Integrated Grab Bar/Safety Rail is a towel bar with grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of stainless steel, this unit comprises a towel bar suspended below a curved grab bar. For maximum support, these bars have three points of contact with the wall. DIMENSIONS: 16 or 24 inches long. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

41. MOEN DESIGNER ELEGANCE SECUREMOUNT GRAB BAR

    Moen Designer Elegance SecureMount Grab Bars are wall grab bars designed for use by individuals with balance, lower extremity, neurological, or mobility disabilities or arthritis. The patented SecureMount system allows these grab bars to be installed in wall studs at any angle, and using the optional SecureMount Anchors allows the bars to be installed anywhere on the wall without using the studs. These stainless steel bars have concealed screws and grip pads for added security. OPTIONS: Pair of SecureMount Anchors. DIMENSIONS: The bars are 1.25 inches in diameter and 16 or 24 inches long. CAPACITY: 500 pounds. COLOR: Brushed nickel, old world bronze, or chrome. WARRANTY: Limited lifetime warranty.

42. MOEN FOLDING MESH SHOWER SEAT

    The Moen Folding Mesh Shower Seat is a shower or bathtub stool designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. This stool has a quick-dry mesh seat, rust-free handles and frame, and non-slip rubber feet. The unit folds for storage and transport. DIMENSIONS: 15.75 inches wide when unfolded and 2 inches wide when folded. CAPACITY: 250 pounds. WEIGHT: 4 pounds. WARRANTY/GUARANTEE: Limited lifetime warranty.

43. MOEN GRAB BAR SHOWER HOLDER

    The Moen Grab Bar Shower Holder is a holder for handshower designed for use by individuals with lower extremity, balance, mobility, upper extremity, or severe physical disabilities or severe spinal cord injury. This unit attaches to most vertical, horizontal, or diagonal grab bars without tools and accommodates most handshowers. DIMENSIONS: Fits grab bars 1.25 to 1.5 inches in diameter. WARRANTY: Limited lifetime warranty.

44. MOEN HANDSHOWER WITH SLIDE BAR (MODELS 3867 & 3887)

    The Moen Handshower with Slide Bar, models 3867 and 3887, is a handshower on a height adjustable bar. The handshower includes a flexible hose, an adjustable slide bar, and a vacuum breaker. Model 3887 has a one-function full spray. Model 3867 has a four-function full spray with massaging rinse. DIMENSIONS: Slide bar is 30 inches long. Hose is 69 inches long. COLOR: Chrome, brushed bronze, brushed nickel, polished brass, oil rubbed bronze, platinum, or satine finish. WARRANTY: Limited lifetime warranty.

45. MOEN PALM GRIP PAUSE CONTROL HANDHELD SHOWER

    The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This shower converts to a palm grip when the handle is removed. This handshower offers three settings: shower, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. A lever enables spray adjustment. This lightweight unit extra-long flex-soft hose to enable seated or standing showering. OPTIONS: Grab bar holder. DIMENSIONS: The hose is 7 feet long. COLOR: White. WARRANTY: Limited lifetime warranty.

46. MOEN PAUSE CONTROL HANDHELD SHOWER

    The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This handshower offers four settings: shower, pulsating, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. The unit also has an easy-to-turn, over-sized spray control. This lightweight unit has a soft-grip handle with safety strap for a secure grip and an extra-long flex-soft hose to enable seated or standing showering. OPTIONS: Grab bar holder. DIMENSIONS: The hose is 7 feet long. WARRANTY: Limited lifetime warranty.

47. MOEN SECURELOCK TUB GRIP (MODEL DN7175)

    The Moen SecureLock Tub Grip, model DN7175, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This portable unit fits over most tubs and locks with the Securelock mechanism. The tub walls are protected by non-skid pads. The circular handle/grab area is textured for a secure grip. DIMENSIONS: The unit fits tub walls 2.75 to 5.5 inches thick. The grip height is 12 inches. CAPACITY: 350 pounds. WEIGHT: 6 pounds. WARRANTY: Limited lifetime warranty.

48. MOEN SUCTION BALANCE ASSIST BAR

    The Moen Suction Balance Assist Bar is a wall grab bar designed for use by individuals with balance disabilities. This portable bar has a non-slip grip and attaches to smooth, flat surfaces with the large suction cup at each end. Locking mechanisms secure the bar to the wall once placed with the suction cups. Releasing the locks releases the bar from the wall. DIMENSIONS: 12 inches long. COLOR: Cool white.

49. MOEN TOOL-FREE SHOWER CHAIR

    The Moen Tool-Free Shower Chair is a bathtub seat or shower chair designed for use by individuals with balance, mobility, or lower extremity disabilities. This height-adjustable chair assembles without tools and has a collapse-resistant leg design, a contoured seat back, and a non-slip seat surface with built-in drainage system. DIMENSIONS (WxD): The seat is 22 x 19.25 inches. The height adjusts from 15 to 21 inches high. The overall footprint is 18 inches. CAPACITY: 300 pounds. WARRANTY: Limited lifetime warranty.

50. OFF-SET DOOR HINGES

    Off-Set Door Hinges are designed to widen doorway openings for access by wheelchair users. These hinges add two inches of width to the doorway and use the existing hinge holes and screws. DIMENSIONS (WxL): 2 x 3.5 inches. COLOR: Chrome.

51. OFFSET DOOR HINGES (MODEL 6523)

    The Offset Door Hinges, model 6523, are door hinges designed to allow the door to swing clear for greater wheelchair clearance. This hinge adds 2 inches to the door opening, using existing hinge holes and screws. Hinges are latex-free and come two to a package. DIMENSIONS (LxW): 3.5 x 2 inches. COLORS: Brass.

52. OPEN SESAME SYSTEM II

    The Open Sesame System II is a residential powered door operator designed for use by people who use wheelchairs. The system includes the Open Sesame Deluxe Door Opener (Model 100), an electric strike plate for mounting in the wooden door frame, the wall transformer and wiring, the transmitter, and mounting hardware for inward and outward opening doors. The system opens and closes left- or right-side hinged doors with the touch of a button on the matchbox-sized transmitter which can be mounted on a wheelchair using the included Velcro fasteners. The transmitter features a pressure pad on the face which allows the system to be activated using fingers, the palm, the side of the hand, an arm, or the chin. The system can also be customized for other activation devices and integrated with other environmental controls. Because the system does not use a spring mechanism, the door may be left open or left ajar according to the user's needs. The unit features an adjustable hold-open delay of 5 to 60 seconds and an auto-close setting which causes the door to close automatically after a specified delay when the door has been opened manually. The automatic open/close cycle is interrupted when an obstacle is encountered. The electric strike plate also enables the door to be unlocked via the transmitter while retaining the existing key lock and the automatic clutch disengagement allows unimpeded manual operation of the door when it is not being powered by the transmitter. POWER: The system is powered by a plug-in wall transformer with low voltage wiring, eliminating the need for special electrical outlet installation. The unit also includes battery back-up, allowing the door to be operated in the event of a power failure. OPTIONS: Security entry system, wireless wall pad, extra transmitters, environmental control interface, and custom modifications. WARRANTY: One-year limited workmanship on materials and internal workmanship.

53. PATHWAY LITE (MODELS AS2, AS3, AS4, AS5, AS6, AS7 & AS8)

    The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (model AS8). The outside width for all models is 32.5 inches. CAPACITY: 600 pounds for all models. WEIGHT: 12 pounds (model AS2); 18 pounds (model AS3); 22 pounds (model AS4); 28 pounds (model AS5); 32 pounds (model AS6); 37 pounds (model AS7); and 42 pounds (model AS8). WARRANTY: 3-year limited warranty.

54. PETITE RECLINER LIFT CHAIR (MODEL 70559)

    The Petite Recliner Lift Chair, model 70559, is a seat lift chair designed for use by individuals with mobility disabilities or lower extremity disabilities who need assistance rising from a chair. This three-position lift/recliner chair has a continuous seat-to-ottoman chaise pad that completely supports the user's legs. The chair has a single electric motor with a built-in emergency battery back-up that allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current. The backup uses 9-volt batteries (not included). DIMENSIONS (LxW): The chair is 34 x 28 inches and the seat is 19 x 19 inches. The power cord is 10 feet long. CAPACITY: 375 pounds. COLORS: Forest green, almond, admiral blue, black cherry, burgundy vinyl, royal blue vinyl, or oatmeal. WARRANTY: 3 years. DELIVERY TIME: 2 to 4 weeks.

55. PONTE GIULIO TRENDY GRAB BAR

    The Ponte Giulio Trendy Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These aluminum bars have a non-slip ABS plastic coating that gives the bar the appearance of wenge wood. The concealed mounting flange has an eleven-hole design for a variety of mounting options. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 16, 18,24, or 36 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. COLOR: Black and silver. WARRANTY: 5-year limited warranty on defects, workmanship and finish.

56. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-10)

    The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 33.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 25 inches from the seat. The seat should be placed 12 inches from the wall to allow space for the reclining function. CAPACITY: 325 pounds. WEIGHT: 110 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

57. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-20)

    The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 32.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 11 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 114 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

58. PRIDE CLASSIC 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL CL-30)

    The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 34 inches; the distance from the seat to floor is 20 inches; the depth of the lift chair is 20 inches and the width is 22 inches. The top of the seat back extends 26 inches from the seat. The seat should be placed 12 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 118 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

59. PRIDE CLASSIC 3-POSITION FULL RECLINE LIFT CHAIR (MODEL CL-15)

    The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 33.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 325 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

60. PRIDE HERITAGE 2-POSITION PARTIAL RECLINE CHAISE LOUNGER (MODEL GL-358XXL)

    The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 66 to 73 inches. The overall chair width is 43 inches; the distance from the seat to floor is 20 inches; the depth of the seat is 22 inches and the width is 30 inches. The top of the seat back extends 29 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 600 pounds. WEIGHT: 168 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on steel lift frame.

61. PRIDE HERITAGE 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL GL-58)

    The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 35 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 11.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 108 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

62. PRIDE HERITAGE 3-POSITION FULL RECLINE HEAVY-DUTY CHAISE LOUNGER (MODEL GL-358XL)

    The Pride Heritage 3-Position Full Recline Heavy-duty Chaise Lounger, model GL-358XL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 66 inches to 73 inches. The overall chair width is 39.5 inches; the distance from the seat to floor is 20 inches; the depth of the seat is 21 inches and the width of the seat is 26 inches. The top of the seat back extends 29 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 500 pounds. WEIGHT: 159 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

63. PRIDE HERITAGE 3-POSITION FULL RECLINE LARGE CHAISE LOUNGER (MODEL GL-358L)

    The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, heat and massage functions, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 69 to 74 inches. The overall chair width is 37 inches; the distance from the seat to floor is 21 inches; the depth and width of the seat are 22 inches. The top of the seat back extends 25.5 inches from the seat. The seat should be placed 17.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 120 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

64. PRIDE HERITAGE 3-POSITION FULL RECLINE MEDIUM CHAISE LOUNGER (MODEL GL-358M)

    The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 35 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 117 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

65. PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE CHAISE LOUNGER (MODEL GL-358P)

    The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is 62 inches and below. The overall chair width is 34.5 inches; the distance from the seat to floor is 18 inches; the depth and width of the seat are 18 inches. The top of the seat back extends 24 inches from the seat. The seat should be placed 17.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT:112 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on the steel lift frame.

66. PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE WIDE CHAISE LOUNGER (MODEL GL-358PW)

    The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is 63 inches and below. The overall chair width is 39 inches; the distance from the seat to floor is 19 inches; the seat depth is 19 inches and the seat width is 24 inches. The top of the seat back extends 23.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

67. PRIDE HERITAGE 3-POSITION FULL RECLINE SMALL CHAISE LOUNGER (MODEL GL-358S)

    The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 63 inches and below. The overall chair width is 35 inches; the distance from the seat to floor is 19 inches; the depth and width of the seat are 18 inches. The top of the seat back extends 23.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 118 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

68. ROUND BATH STOOL

    The Round Bath Stool is a bathtub stool designed for use by individuals with mobility and balance disabilities. Designed for use in narrow tubs and showers, this stool features non-slip rubber tips and height-adjustable aluminum legs that are flared to provide a stable base. DIMENSIONS: The seat height adjusts from 13 to 17 inches and is 13 inches in diameter. The legs are 13.5 inches wide and 13.5 inches deep. CAPACITY: 300 pounds. COLOR: White.

69. SAFETY STRIPS (MODEL A830600)

    Safety Strips, model A830600, are safety treads designed to provide traction in the bathtub or shower for people with balance or mobility disabilities. These peel-and-stick self-adhesive strips can be placed where needed. DIMENSIONS (LxW): Each strip is 8 x 0.75 inch.

70. SAVANNAH RAISED TOILET SEAT

    The Savannah Raised Toilet Seat is designed for use by individuals who have had a hip replacement or who have mobility disabilities. This seat features front and rear cutouts for personal hygiene, a gentle slope to facilitate getting on and off the toilet, and a front lip that secures the seat to the toilet. The unit adapts to most toilet sizes and shapes using the two included molded plastic brackets. DIMENSIONS (LxW): 15.75 x 16.25 inches. The seat is available in a choice of 2 or 4 inches high. CAPACITY: 420 pounds.

71. SMART-RAIL

    The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMENSIONS (WxDxH): 32 x 24 x 30 inches. The rail is 16 inches wide between the base legs. CAPACITY: 250 pounds.

72. STERLING 303 RECLINING BATH LIFT

    The Sterling 303 Reclinining Bath Lift is a portable powered bath lift designed for use by individuals with lower extremity, mobility, neurological, or balance disabilities or spinal cord injury. This lift is securely fixed to the bathtub by suction cups. To remove the lift from the tub, the suction cups are released using the quick-release handle. The lift is equipped with a reclining seat with deluxe comfort covers and large folding side panels that open to rest on the edges of the tub, creating a generous transfer area. The seat is supported by a stainless steel frame. Pressing the DOWN control button lowers the seat to the bottom of the tub and begins the seat recline function. Additional control buttons enable the user to select the amount of recline. Pressing the UP button returns the seat to the starting position at the top of the tub. The unit folds for storage and transport. POWER: Uses the included rechargeable battery. The unit is equipped with a recharge reminder light and an intelligent safety system that checks the power levels before every use. The control will not allow the lift to be lowered unless there is sufficient power to raise it again. DIMENSIONS: The base is 12 x 24 inches. The unit is 39 inches high including the backrest. The backrest is (HxW) 23 x 13 inches. The maximum seat height is 16.1 inches and the minimum height is 2.9 inches. The seat is 15.4 inches wide excluding the side panels and 27.2 inches wide with the side panels opened. The length of the sitting area is 19 inches. CAPACITY: 297 pounds. WEIGHT: 30.3 pounds excluding covers and battery. COLOR: White or blue.

73. SUPERPOLE & SUPERPOLE BARIATRIC

    The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a SuperBar, or with a SuperTrapeeze. INSTALLATION: No structural reinforcement is needed and only basic tools are required to complete the jackscrew installation between the floor and the ceiling. The top anchor plate has holes for two screws to be anchored directly into ceiling studs for stability. A bottom zinc-plated extension screw with cover sleeve further enhances stability. OPTIONS: SuperBar, SuperTrapeeze, Safety Island, and SuperTray add-on kits. DIMENSIONS: The pole is 1.5 inches in diameter and has a height range from 93 to 101 inches. CAPACITY: 250 pounds for the SuperPole and 450 pounds for the SuperzPole Bariatric. WEIGHT: 13 pounds. WARRANTY: Included.

74. TOILET SAFETY ARM SUPPORT (MODEL 1810)

    The Toilet Safety Arm Support, model 1810, is a safety frame designed for individuals who need extra support when using the toilet. The seat rests on a white plastic sleeve and attaches easily with a center bracket. The tubing is made of anodized, rustproof aluminum. No legs extend to the floor. Price stated is for 2 arm supports (one complete set).

75. TOILEVATOR

    The Toilevator is a toilet riser designed to elevate a toilet for people with mobility disabilities. This oval unit fits toilets with round and elongated bowls and bolts to the floor under the toilet, elevating the entire toilet. The modification kit includes the spacer base, one soil pipe extension, two long closet bolts, four hexagon nuts, one extended flexible water hose, four flat washers, two plastic washers, two trim caps, two foam seals, and complete installation instructions. DIMENSIONS: This unit adds 3.5 inches of height to 14- and 15-inch toilets. COLOR: White.

76. TRI-GRIP BATHTUB RAIL

    The Tri-Grip Bathtub Rail is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with three gripping areas for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxW): 7.5 and 16 x 18 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish.

77. WALL SWITCH EXTENSION HANDLE (MODEL F754141000)

    The Wall Switch Extension Handle, model F754141000, is a plastic device designed to assist wheelchair users or persons with limited arm movement to operate standard height light switches. The handle attaches to the any standard toggle-type wall switch, and allows it to be flipped by pushing or pulling on the unit. Screws and bushings are included. Made of molded clear plastic. Two per package. DIMENSIONS: Handle is 12 inches long.

78. WINGITS REFINED ENGINEERED SAFETY (RES) GRAB BAR SYSTEM

    The WingIts Refined Engineered Safety (RES) Grab Bar System is grab bar installation hardware designed for mouting grab bars for use by individuals with balanace or mobility disabilities. Made of stainless steel and fire- retardant structural plastic, this mounting hardware can be used in all hollow wall framing and tub surrounds. It is waterproof, requires no caulking, and is not loosened or affected by directional forces. It supports WingIts grab bars and grab bars from other manufacturers. The hardware comes in sets, with enough hardware in one set for installing one grab bar.

See Adaptmy.com products that are no longer available.