ErgoDirect604 Birchwood Park Drive
Middle Island, New York 11953
Products distributed by ErgoDirect (listed alphabetically)
7500 FLAT PANEL RADIAL ARM (MODELS 7500-500, 7500-800, 7500-1000, & 7500-1500)
The 7500 Flat Panel Radial Arm is a monitor arm designed to hold a flat panel computer monitor for individuals with mobility disabilities or low vision. This unit suspends a flat panel (not included) above the desk surface and allows the user to position it. Cables are routed inside the arm. The unit holds a monitor weighing 2 to 13 pounds (model 7500-500), 6 to 21 pounds (model 7500-800), 8 to 27 pounds (model 7500-1000), or 13.5 to 44 pounds (model 7500-1500). The unit has a vertical range of 18 inches and a horizontal range of 27 inches, and folds to occupy 3 inches of space. The unit includes FLEXmount with 75- and 100-millimeter VESA adapters and a total of 6 mounting options. OPTIONS: 2- and 6-inch extender tubes to raise monitor; quick release monitor bracket/tilter; keyboard platform; mouse tray; wrist rest; repositioning handle; pole clamp mount; CPU holder (small, medium, large). DIMENSIONS: 27 inches long.
7FLEX LCD ARM (MODEL 7FLEX-104I )
The 7Flex LCD Arm, model 7Flex-104i, is a monitor arm designed to position a flat panel computer monitor for individuals with physical disabilities or low vision. This arm suspends a flat panel display above the user's desk. The suspended monitor can be repositioned with just one hand. The unit has a vertical range of 16 inches (8 inches up and down from horizontal). It rotates 360 degrees at three joints, and can tilt the monitor over 200 degrees. The unit comes with FLEXmount mounting hardware with 6 mounting options, including desktop and grommet clamp, thru-desk bolt, and wall mounting. It is VESA-monitor compatible. The unit mounts to the desk or to a wall. OPTIONS: 75- or 100-millimeter VESA monitor adapters; 2- and 6-inch extender tubes for raising height of arm; repositioning handles; CPU holders (small, medium, large). DIMENSIONS: 24 inches long. It folds to occupy 3 inches of space. COLOR: Black.
ARCVIEW FLAT PANEL MOUNTING SYSTEM (MODELS 9177-2-1000 & 9177-2-1500)
The ArcView Flat Panel Mounting System is a monitor arm designed for use to suspend two flat panel monitors above a desk. The arm is height-adjustable, and the pivot and tilt of each monitor can be adjusted independently within a vertical range of 18 inches. Monitors can be positioned at any point along a beam supported by the arm. The system includes FLEXmount with six mounting options, and 75- and 100-millimeter VESA adapters are included. The arm supports monitors weighing 0.5 to 10.5 pounds per monitor (model 9177-2-1000) or 4 to 19 pounds per monitor (model 9177-2-1500). OPTIONS: Quick install/release monitor bracket.
ARMAZING MEMORY FOAM ARM REST PADS (MODEL PAD2)
ARMazing Memory Foam Arm Rest Pads (PAD2), are arm pads designed for use at computer work stations. These pads attach to the arm rests of a chair at a computer work station to protect the user's forearms and elbows from pressure points and improve user comfort by making the arm rests softer. This set of pads includes two memory foam pads with an elastic shroud that attaches snugly to any existing arm rest from 6 to 11 inches long.
BETTERPOSTURE KNEELING CHAIR - STANDARD (MODEL F1420)
The BetterPosture Kneeling Chair - Standard, model F1420, is a height-adjustable posture chair designed to promote good posture and strengthen the lower back muscles. The user sits in a kneeling posture with the knees resting on a knee pad. This manually height adjustable kneeling chair has a steel frame with nylon casters. The seat and knee pad are made of supportive polyurethane foam covered with durable fabric. DIMENSIONS (HxLxW): 21 to 28.5 x 29 x 18 inches. The seat is 12.5 x 17.5 inches. The knee cushion is 6.5 x 11 inches. CAPACITY: 280 pounds. WEIGHT: 17 pounds. COLOR: Black. WARRANTY: Five years.
CLASSIC GEL PLUSPAD
The Classic Gel PlusPad, model SMP40, is a wrist support for mouse designed for use by individuals with carpal tunnel syndrome or upper extremity disabilities. This leatherette gel pad provides a soft support to reduce strain on the wrist. DIMENSIONS (LxW): 2.75 x 5 inches. COLOR: Black.
COOLDOCK NOTEBOOK STAND (MODEL F7000/BK)
The COOLdock Notebook Stand, model F7000/BK, is a notebook/laptop computer support designed to help prevent poor posture that can lead to back, neck, and wrist strain. This stand enables the user to adjust the height and angle of the notebook screen for optimal viewing and ergonomic comfort. The unit supports wide screen notebooks. A built-in four-port USB 2.0 hub provides connections for computer accessories. Two built-in fans cool the underside of the notebook which is important in extending the life of a computer. DIMENSIONS (HxLxW): 2 x 11 x 13 inches.
ERGOTRON LX DESK MOUNT LCD ARM (MODEL 45-241-026)
The Ergotron LX Desk Mount LCD Arm, model 45-241-026, is a monitor arm designed for use in an accessible computer work station. This unit allows the user to reposition the liquid crystal display (LCD) up, down, forward, or back with a touch to help reduce eye, back, and neck strain. The display can be tilted up to 80 degrees and rotated up to 360 degrees. Cables can be routed under the arm, and the display can be pushed out of the way when not in use. The arm folds back over the base into a compact retracted position. The unit supports displays less than 24 inches measured diagonally and weighing 7 to 20 pounds. Made of polished aluminum, the unit includes an LX arm, extension, desk clamp, and grommet mount bases. DIMENSIONS: Height range is 13 inches and it extends the LCD up to 25 inches.
ERGOTRON MX DESK MOUNT LCD ARM (MODEL 45-214-026)
The Ergotron MX Desk Mount LCD Arm, model 45-214-026, is a height-adjustable monitor arm designed for use in an accessible computer work station. This unit supports liquid crystal display (LCD) monitors weighing up to 30 pounds, and allows the user to position the display to relieve eye, neck, and back strain. The unit has height adjustment, extension/retraction, tilt, and portrait-to-landscape capabilities. The user can push the display out of the way when not in use. Cables can be concealed and routed under the arm. DIMENSIONS: Arm extends up to 16.7 inches. The height adjusts up to 5 inches.
ERGOTRON NEO-FLEX LCD ARM (MODEL 45-174-300)
The Ergotron Neo-Flex LCD Arm, model 45-174-300, is a monitor arm designed for use in accessible computer work stations. The unit can be repositioned by pushing the side button while lifting the display, thus changing its position. Adjustments include height, up to 180 degrees tilt, and 360 degrees of pan or rotation. The arm supports monitors up to 22 inches, measured diagonally, and weighing up to 18 pounds. The unit comes with a desk clamp and grommet mount, 4 screws for LCD attachment (long screws with spacers for LCDs with a recessed interface). DIMENSIONS: Height adjustment range is 8 inches.
ERGOTRON NEO-FLEX WIDESCREEN LIFT STAND (MODEL 33-329-057)
The Ergotron Neo-Flex Widescreen Lift Stand, model 33-329-057, is a monitor stand designed for use in accessible computer work stations. This stand enables light-touch adjustments of larger displays for optimum viewing, including height adjustment, tilt up to 30 degrees, 360-degree pan, and portrait-to-landscape rotation (90 degrees). It supports monitors from 20 to 32 inches, measured diagonally, and weioghing 16 to 36 pounds. Cables can be routed behind the stand. The unit includes the stand, monitor mounting bracket, cable ties, VESA monitor mounting kit, and a manual. DIMENSIONS: Height adjustment range is 5 inches. COLOR: Two tone gray.
EVO LCD ARM (MODEL 5545)
The EVO LCD Arm, model 5545, is a monitor arm designed to provide flexible positioning of a flat panel computer monitor for individuals with vision or mobility disabilities. This liquid crystal display (LCD) mounting arm holds a flat panel monitor above the work surface and enables fingertip adjustment of monitor height and position. The arm extends up to 16 inches, and folds back upon itself, allowing the monitor to be moved out of the way when not in use. Other features include integrated cable management and a desk clamp mount which can be reconfigured for thru-desk mounting.
EVOLUENT MOUSE-FRIENDLY KEYBOARD
The Evoluent Mouse-Friendly Keyboard is a modified ergonomic keyboard that makes it easier to use a keyboard with a mouse. On this keyboard, the numeric keypad is on the left, so the mouse (not included) is closer to the alphabetic keys and, therefore, easier to reach when it is placed to the right of the keyboard. This allows the user's right arm to be in a relaxed neutral position when using the mouse, and reduces the need to remove the right hand from the mouse in order to operate Enter, Del, Page Up, Page Down, arrows, and other keys in the numeric keypad. Other modifications in this keyboard include duplicate Page Up, Page Down, Home, End, Del, and arrow keys on the right; full size arrows, Del, Fs, Ctrl, and Alt keys; an extra Del key at the left end of the spacebar to allow left hand operation while the right hand is on the mouse; tactile bumps on often used keys such as Del, End, Page Down, Ctrl, and down arrow to aid operation by touch; hot keys for one touch access to the Internet, e-mail, media player, volume control, standby, power off, and other functions; notebook computer-type key mechanisms; flat key caps. COMPATIBILITY: For use on IBM and compatible, Macintosh, and Linux- and Unix-based computers. SYSTEM REQUIREMENTS: For all computers a USB port is required. For personal computers (PCs) require Windows XP for full functionality; some hotkeys on the top row may not work in other Windows versions. For Macintosh, Unix, and Linux, all keys are functional except for some hotkeys on the top row. For Macintosh, the Windows key is the Mac key, the eject key is pressing and holding F12, and Num Lock is locked on. DIMENSIONS (HxDxW): 0.5 x 6.25 x 15.4 inches. COLOR: Black keys with white characters and silver frame.
EVOLUENT VERTICALMOUSE 2 LEFT HAND
Evoluent VerticalMouse 2 Left Hand is an ergonomic mouse designed for use by individuals with carpal tunnel syndrom or repetitive strain injuries. The vertical shape of this mouse supports the user's left hand in a fully upright handshake position that eliminates twisting of the forearm. The optical sensor has 1,200 dots-per-inch (dpi) resolution, allowing the pointer to be moved across a 17-inch monitor with only 0.5 inch movement of the mouse. The mouse has five buttons that have basic functionality in Windows without a driver: left click (top), right click (middle), back (bottom), middle click (wheel), forward (thumb). A driver is included allowing each of the five buttons to be programmed with different functions in Windows XP or Vista 32-bit. Other special features when used with XP Pro and Vista 32-bit include speed toggle, auto click, click lock, and audio and/or visual break reminders. COMPATIBILITY: For use on IBM and compatible, Macintosh, Unix (except Solaris 9), and Linux-based computers. SYSTEM REQUIREMENTS: Personal computers (PCs) require USB or PS/2 port; Windows 2000, XP, Vista, or 7 operating system. Macintosh requires OX 9 or OS X operating system and a USB port. Unix and Linux require a USB port. DIMENSIONS (HxLxW): 3 x 4.6 x 3 inches. Cable is 6.6 feet long. COLOR: Silver and black.
GEL PALM REST FOR ELITE / NATURAL KEYBOARD (MODEL SWR15EL)
The Gel Palm Rest for Elite/Natural Keyboard, model SWR15EL, is a keyboard palm support designed for use by individuals with carpal tunnel syndrome. This support is intended to maintain straight wrist posture and minimize contact stress during typing. This Lycra support is intended specifically for use with the Microsoft Natural Keyboard Elite (not included; see separate entry), an ergonomic keyboard. DIMENSIONS (LxW): 3 x 19 inches. COLOR: Black.
GOLDTOUCH & GOLDTOUCH FOR MAC ADJUSTABLE KEYBOARD
The Goldtouch Adjustable Keyboard and Goldtouch for Mac Adjustable Keyboard are split expanded keyboards designed for use by individuals with carpal tunnel syndrome or other repetitive motion disabilities, limited upper extremity range of motion, or other upper extremity disabilities. This keyboard physically splits in the center, allowing each section to be independently adjusted for optimal use. Each section can be adjusted from 0 to 30 degrees both vertically and horizontally. The small size of the keyboard and the enlarged spacebar on each section enhances comfort. The keyboard features an enhanced editing key layout and full-sized, full travel, low noise tactile keys with soft end stop. The keyboard connector has a USB connector or a USB connector with a PS2 adapter. COMPATIBILITY: For use with IBM and compatible or Apple Macintosh computers. SYSTEM REQUIREMENTS: For PC, Windows 2000, XP, or Vista operating system. WEIGHT: 3.3 pounds. COLOR: Black or putty.
HUMANSCALE FLAT PANEL GLARE FILTER (MODELS FP15, FP17, FP19, FP20, FP21, FP15PF, FP17PF, FP19PF, FP20PF, & FP21PF)
The Humanscale Flat Panel Glare Filter is a glare reduction screen designed for use by individuals with low vision. Six layers of optical coating on each side reduce up to 99 percent of glare and reflection. Coatings are molecularly bonded to glass using vacuum deposition. Static field reduction is 99 percent. Overall ultraviolet (UV) shielding is 95 percent, including UVA 77.4 percent of UVA and 100 percent of UVB. Photopic reflectance is 0.25 percent or less. Available in a standard (models FP15, FP17, FP19, FP20, and FP21) or privacy (models FP15PF, FP17PF, FP19PF, FP20PF, and FP21PF) version, the unit has adjustable brackets for installation, and fits monitors up to 2 inches thick with a diagonal screen size of 15 inches (models FP15 and FP15PF), 17 inches (models FP17 and FP17PF), 19 inches (models FP19 and FP19PF), 20 inches (models FP20 and FP20PF), or 21 inches (models FP21 and FP21PF). DIMENSIONS (HxW): 10.88 x 14.25 inches (model FP15), 10 x 13.13 inches (model FP15PF), 12.75 x 14.63 inches (model FP17), 11.5 x 15 inches (model FP17PF), 12.38 x 15.75 inches (models FP19 and FP19PF), 13 x 17.13 inches (models FP20 and FP20PF), or 13.75 x 18.13 inches (models FP21 and FP21PF).
LCD DESKTOP ARTICULATING MOUNT (MODEL LCT-101)
The LCD Desktop Articulating Mount, model LCT-101, is a monitor arm designed to optimize the LCD monitor viewing angle and position at a computer workstation. The arm permits the user to adjust to the flat screen's height, tilt, swivel, swing and extension, so it can be viewed from almost any angle or position. The arm has a die-cast aluminum alloy body and includes a cable management system. It is compatible with 10- to 24-inch LCD screens, and supports monitors weighing up to 25 pounds. It comes with a VESA adapter plate and a desktop clamp and desktop bolt for mounting. OPTIONS: Extension arm. WEIGHT: 9 pounds. COLOR: Black. WARRANTY: Limited 5-year warranty.
NEUTRAL POSTURE CHAIR - 6000 SERIES
The Neutral Posture Chair - 6000 Series is an adjustable office chair designed for use to provide back support while working at a desk. This chair has a high back with adjustable back height and angle and an inflatable lumbar pad. This chair features six seat size and contour options with adjustable seat height, depth, angle, and tension. It has adjustable arm height, width and 360-degree armpad rotation. The 6000 Series also has a plastic outer shell and a multi-function mechanism with seat slider and forward tilt-stop. Seat size/contour options include small seat/minimal contour, medium seat/minimal contour, medium seat/moderate contour, medium seat/deep contour, large seat/minimal contour, large seat/deep contour. OPTIONS: Upholstered back; Fring footrest; two-way adjustable headrest or adjustable neckrest.
The OrthoMouse is an ergonomic mouse designed for use by individuals with carpal tunnel syndrome or other repetitive strain injuries (RSI) of the hand. This mouse has an asymmetrical, semi-spherical shape that obligates the hand to work and rest in the Position of Function, in which all the musculoskeletal components of the fingers, hand, wrist and forearm exist in complete equilibrium. Extensive and repetitive work or periods of immobilization (rest/inactivity) are conducted in a position that does not cause strain, pain, or injury. The mouse comes in left- and right-handed versions and adapts to different sizes with three interchangeable adapters (small, medium, and large) for the palm of the hand and two upper adapters. The body is textured to provide micro-channels for air flow and decreased perspiration. It has five programmable buttons and is corded with a USB interface. SYSTEM REQUIREMENTS: Windows, Macintosh OS, or Linux. DIMENSIONS (HxLxW): 2.56 x 4.45 to 5.35 x 3.23 inches. The cord is 5 feet, 10 inches long. WARRANT: Two-year limited warranty.
QUICKFIND DOCUMENT HOLDER - DESK TOP (MODEL 6160NC)
The QuickFind Document Holder - Desk Top, model 6160NC, is a document stand designed to hold papers at a computer work station or at a table in a shared location. This unit holds frequently used documents, instructions, or other documents in polypropylene pages for quick reference. The polypropylene pages reduce glare and protect the documents. The unit's compact footprint requires minimal desk space and the angle adjusts for the best viewing position. The unit comes with a starter set of 10 polypropylene pages with edges in five different colors to identify different document types. DIMENSIONS (HxDxW): 11.5 x 11 x 18 inches. WEIGHT: 5 pounds. COLOR: Two pockets each with blue, green, black, red, or yellow edges.
RestMan 1 is a desk- and chair-attachable computer arm support designed to prevent repetitive strain injury while using a computer mouse for extended periods. Designed for use in home or office settings, the unit has a surface that forms a single continuous plane to support the forearm and reduce localized pressure on the wrist as well as strain to the muscles and tendons in the neck, arms, and shoulders. The surface pad also functions as a mouse pad. The unit has a double attachment system that allows it to be installed to computer desktops up to 5 centimeters thick or to chair armrests up to 8 centimeter wide and 5 centimeters thick. Both attacment options provide a more natural location for the mouse and encourage a relaxed sitting position. The base and attachments are made of strong ABS plastic. DIMENSIONS (HxLxW): 14 x 45 x 20 centimeters. COLOR: Black, yellow, or red.
STRESS BUSTER MASSAGING FOOTREST (MODEL 2119)
The Stress Buster Massaging Footrest, model 2119, is a footstool and foot massager designed for use by individuals with lower extremity disabilities. This massaging footrest features alternating rollers for a relaxing foot massage. The adjustable tilt encourages frequent position changes during prolonged desk work to help reduce leg pressure and improve circulation. The unit has a steel frame with a plastic footpad. DIMENSIONS (HxDxW): 5 x 20.5 x 20.25 inches. WEIGHT: 7 pounds. COLOR: Black footpad with chrome finish frame.
VISIONMOUNT FULL-MOTION DESK MOUNT (MODEL MD115)
The VisionMount Full-Motion Desk Mount, model MD115, is a monitor arm designed to support a computer monitor at a viewable angle and comfortable position for individuals with physical disabilities or low vision. This full-motion, height-adjustable desk mount holds a flat-panel monitors or TV up to 30 inches in diameter and weighing up to 35 pounds. It can be attached to the back edge of a desk or mounted inside the cable opening. The mount can tilt and swivel with fluid motion in every direction, allowing it to move from portrait to landscape view. An extension arm extends the monitor for viewing from nearly any angle. A wire management channel keeps cables concealed and organized. The unit has small and large VESA monitor brackets to support VESA 75 x 75, 100 x 100, 200 x 100 and 200 x 200 patterns. The unit can tilt plus or minus 15 degrees, swivel or pan plus or minus 90 degrees, and roll plus or minus 180 degrees. DIMENSIONS (HxDxW): 18.25 x 6.73 to 18.5 x 11.25 inches. The mount fits surfaces up to 2.6 inches thick. The extension arm extends the monitor up to 15 inches.
VISIONMOUNT FULL-MOTION DESK MOUNT (MODEL SD115)
The VisionMount Full-Motion Desk Mount, model SD115, is a monitor arm designed for use to support a computer monitor at a viewable angle and comfortable position for individuals with physical disabilities or low vision. This height-adjustable, full-motion desk mount for flat-panel computer monitors or televisions can be attached to the back edge or mounted inside the cable opening of desks. Independent tensions in the arm and head allow for adjustment, and an extension arm allows the monitor to extend further in all directions for viewing from nearly every angle. The unit's SmoothLock mechanism provides tilt motion with the touch of a finger. The arm has up to 15 degrees of tilt and up to 90 degrees of swivel and/or pan. A wire management channel keeps cables concealed and organized. The unit is made of solid extruded aluminum and heavy-gauge steel, and has VESA 75 and 100 mounting patterns to support monitors up to 24 inches and weighing up to 20 pounds. DIMENSIONS (HxDxW): 19.25 x 5.5 to 16.5 x 8.75 inches. The unit fits desks up to up to 2.6 inches thick. The extension arm extension arm allows the monitor to extend up to 15 inches in all directions. COLOR: Black or silver.
VURYSER MAX PLUS (MODEL VUR 7255)
VuRyser Max Plus, model VUR 7255, is a monitor stand designed to raise a computer monitor to eye level. Each stackable unit elevates the monitor 2 inches. Units support up to 60 pounds, and can also be used for printers, faxes, and other office machines. These stands have four pockets for storing paper or envelopes. DIMENSIONS (HxLxW): 2 x 15 x 17 inches. COLOR: Black/graphite.