ModularHose.com, a division of EDM Zap

1108 Front Street
Lisle, Illinois 60532
United States
Telephone: 800-759-2839 or 630-852-1699.
Fax: 630-852-3678.
Web: http://www.modularhose.com/.
Email: info@modularhose.com.

Products manufactured by ModularHose.com, a division of EDM Zap (listed alphabetically)

1. MODULARHOSE.COM ASSISTIVE TECHNOLOGY DOUBLE KIT (MODEL 90655)

   The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), 2 Loc-Line 0.75-inch fixed mounts with plate, 20 reusable cable ties, and one set of 1.88-inch diameter circular Velcro hook/loop coin. COLOR: Black. WEIGHT: 1.5 pounds.

2. MODULARHOSE.COM ASSISTIVE TECHNOLOGY DOUBLE SPRING CLAMP KIT (MODEL 90674)

   The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, a 3M Dual Lock, 2 spring clamps with integrated fixed mount, 2 segments of Loc-Line 0.75-inch ID hose (1.5 feet long), and a Y-fitting for connecting the Loc-Line segments to form a bridge. The clamps are connected to each of the hose segments and fastened onto a table or the frame or armrests of a chair or wheelchair. The other ends of the hose segments are connected at the Y fitting, and the mounting plate and iPad holder are fixed to the Y fitting and positioned for optimum use. The clamps are not designed to be attached to vinyl or cloth surfaces or any surface that can be scratched or marked. The clamps apply a large amount of pressure for holding purposes and may scratch surfaces. . The kit comes preassembled and ready for use. CAPACITY: 1.5 pounds. WEIGHT: 2 pounds.

3. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT (MODEL 90650)

   The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), a Loc-Line 0.75-inch fixed mount with plate, 10 reusable cable ties, and one set of 1.88-inch diameter circular Velcro hook/loop coin. COLOR: Black. WEIGHT: 0.7 pound.

4. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT PLUS (MODEL 90652)

   The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), a Loc-Line 0.75-inch fixed mount with plate, 20 reusable cable ties, and one set of 1.88-inch diameter circular Velcro hook/loop coin. COLOR: Black. WEIGHT: 1.3 pounds.

5. MODULARHOSE.COM ASSISTIVE TECHNOLOGY KIT WITH TWO PLATES (MODEL 90654)

   The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), 2 Loc-Line 0.75-inch fixed mounts with plate, 10 reusable cable ties, and one set of 1.88-inch diameter circular Velcro hook/loop coin. COLOR: Black. WEIGHT: 0.9 pound.

6. MODULARHOSE.COM ASSISTIVE TECHNOLOGY SPRING CLAMP KIT (MODEL 90673)

   The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75-inch segments of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), a Loc-Line double segment to connect the hose segments, and a 3M Dual Lock. The kit comes preassembled and ready for use. The clamp is not designed to be attached to vinyl or cloth surfaces or any surface that can be scratched or marked. The clamp applies a large amount of pressure for holding purposes and may scratch surfaces. WEIGHT: 1.25 pounds.

7. MODULARHOSE.COM AT IPAD KIT (MODEL 90670)

   The ModularHose.com AT iPad Kit, model 90670, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system can be used with iPad 1 and iPad 2. The kit comes with an iPad holder with a silicon edge for protection and grip, an integrated fixed mount plate attached to the iPad holder, 2 spring clamps with integrated fixed mount, 2 segments of Loc-Line 0.75-inch ID hose (1.5 feet long), and a Y-fitting for connecting the Loc-Line segments to form a bridge. The clamps are connected to each of the hose segments and fastened onto a table or the frame or armrests of a chair or wheelchair. The other ends of the hose segments are connected at the Y fitting, and the mounting plate and iPad holder are fixed to the Y fitting and positioned for optimum use. The clamps are not designed to be attached to vinyl or cloth surfaces or any surface that can be scratched or marked. The clamps apply a large amount of pressure for holding purposes and may scratch surfaces. WEIGHT: 2.3 pounds.

8. MODULARHOSE.COM AT STARTER KIT (MODEL 90680)

   The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive technology field, giving the user the flexibility and option to create hundreds of different configurations. The user can create a few standard ModularHose.com AT kits or customize to their own needs. The parts include: 12 feet of Loc-Line ID hose, four fixed mount 3-inch discs, two fixed mount 4 x 6 inch plates, four spring clamps with fixed mounts, one round tube clamp kit, four double sockets, two Y-fitting connectors, 50 reusable cable ties, one set of Velcro hook/loop coin, 3M Dual Lock, and an assembly tool. WEIGHT: five pounds.

9. MODULARHOSE.COM ROUND TUBE CLAMP KIT (MODEL 90750)

   The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket for mounting Loc-Line tubing in two opposing directions, and grip liner or tubing protector for using as either a tube protector or as a liner for 0.875-inch tubing. WEIGHT: 0.9 pound.

10. MODULARHOSE.COM SPRING CLAMP KIT WITH PLATE 1 FOOT (MODEL 90665)

    The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a 1-foot segment of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), and a spring clamp. The kit comes preassembled and ready for use. The clamp is not designed to be attached to vinyl or cloth surfaces or any surface that can be scratched or marked. The clamp applies a large amount of pressure for holding purposes and may scratch surfaces. The kit also includes one set of 1.88-inch diameter circular Velcro hook/loop coins. COLOR: Black. WEIGHT: 0.8 pound.

11. MODULARHOSE.COM SPRING CLAMP KIT WITH PLATE 2 FEET (MODEL 90667)

    The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a 2-foot segment of Loc-Line 0.75-inch ID hose (which is flexible but can lock into position), and a spring clamp. The kit comes preassembled and ready for use. The clamp is not designed to be attached to vinyl or cloth surfaces or any surface that can be scratched or marked. The clamp applies a large amount of pressure for holding purposes and may scratch surfaces. The kit also includes one set of 1.88-inch diameter circular Velcro hook/loop coins. COLOR: Black. WEIGHT: 1 pound.