Products are listed alphabetically.

Page 1 of 1

1. ANGLE RAMP --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- Portable telescopic dual tracks for wheelchair and wheelchair alternative access. Non slip material extends along entire length for tire grip. Designed with inside edge of each ramp bent downward and out of the way for ease in loading electrical wheelchairs. Extended length 6 feet 4 inches. Telescoped length 3 feet 5 inches. Inner width of each track 10 inches. 15 pounds each. Maximum load capacity 660 pounds per pair. A...[More Information]
   
   
2. E Z RAMPS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Folding tracks. Lightweight extruded aluminum. Each ramp is 6 inches wide with a 2 inch side rail. Variety of lengths in solid piece or hinged in the middle. One piece ramps: 1 1/2, 3, 4, 6 or 8 feet long. Hinged ramps: 3, 4, 6 or 8 feet long. Two ramps per set. Special lengths cut to size; add 20 percent to price of size cut (next longest length)....[More Information]
   
   
3. EZ-ACCESS PORTABLE RAMP (MODEL R1000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Portable Ramp, model R100, is a portable single-track wheelchair and scooter ramp designed to roll up and store in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 36 inches when extended; 30 inches wide. Collapsed diameter is 6 inches. CAPACITY: WIll hold up to 600 po...[More Information]
   
   
4. EZ-ACCESS RAMP --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Ramp is a two-track wheelchair ramp designed to be stored in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 60 inches when extended; collapses to 28 inches. CAPACITY: 350 pounds. WEIGHT: 14 pounds....[More Information]
   
   
5. EZ-ACCESS SCOOTER RAMP (MODEL R3000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Scooter Ramp, model R3000, is a portable ramp designed for scooter and wheelchair access to vans and minivans. This platform style ramp features side rails and center panels that slide into place and lock to provide a solid, non-skid surface. The ramp is made of anodized aluminum. DIMENSIONS: Extends up to 8 feet long. CAPACITY: Will hold up to 750 pounds....[More Information]
   
   
6. FOLDING ALUMINUM WHEELCHAIR RAMPS --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Portable, folding tracks for wheelchair. Aluminum. Self locking, easily stored, rust proof, lightweight. Accommodates most wheelchairs. Available in 6 or 8 foot lengths....[More Information]
   
   
7. MINI RAMPLETTE --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- Portable telescopic dual tracks for wheelchair access. Non slip material extends along entire length for tire grip. Extended length 4 Feet 11 inches. Telescoped length 2 feet 9 inches. Inner channel width of each track 8 inches. 10 pounds each. Maximum load capacity 660 pounds per pair. ....[More Information]
   
   
8. NON FOLD PORTABLE TRACK RAMPS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Portable non folding tracks. Arc welded steel, gray enamel finish. 3 sizes: 6 by 48 inches, 6 by 60 inches, and 6 by 84 inches. Weight: 34, 40 and 51 pounds....[More Information]
   
   
9. PORTA-RAMP 5 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Ramp 5 is a set of 2 lightweight, folding tracks designed for use with four-wheeled wheelchairs. The tracks are constructed of three telescoping sections. The sections interlock for full extension, and have a nonslip finish with slip-resistant vinyl pads. A nylon carrying pouch is included so the tracks can be carried on the handles of the wheelchair. CAPACITY: Will hold up to 350 pounds. DIMENSIONS: The track sec...[More Information]
   
   
10. PORTA-RAMP 6 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Porta-Ramp 6 is a set of 2 folding, portable tracks with telescoping sections. The sections interlock and feature a nonslip finish with slip-resistant vinyl pads. CAPACITY: Holds up to 350 pounds. DIMENSIONS: Each track has 40-inch sections and extend up to 6 feet. WEIGHT: Each track is 8 pounds....[More Information]
    
    
11. PORTA-RAMP 8 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Ramp 8 is a set of 2 portable tracks constructed of three telescoping interlocking sections. One of the tracks is an adjustable center leg. All tracks have a nonslip finish with slip resistant vinyl pads. CAPACITY: The ramp will hold up to 350 pounds. DIMENSIONS: Sections are 36 inches each and extend up to 8 feet. CAPACITY: 350 pounds. WEIGHT: Each track weighs 11.5 pounds....[More Information]
    
    
12. PORTABLE FOLDING TRACK RAMPS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Portable folding tracks. Arc welded steel, gray enamel finish. 11 sizes: 6 by 36 inches to 6 by 144 inches. Each track folds to one half length. Weight per pair 27 to 98 pounds....[More Information]
    
    
13. PORTABLE RAMPS --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Portable Ramps are folding, telescoping tracks designed to provide access to wheelchair users over curbs and steps. The andized aluminum tracks lock securely in place during use, but collapse to fit in a carrying bag that can be hung over the back of a wheelchair. Each track features a safety rail and requires no tools for assembly. DIMENSIONS: The tracts extend from 28 inches to more than 5 feet long. Each track is...[More Information]
    
    
14. PORTABLE WHEELCHAIR RAMP. --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- Portable aluminum wheelchair ramp for vans, houses and buildings. 2 folding tracks per set. Each weighs 11 pounds. Will not rust. Adjustable telescoping length from 5 to 8 feet. 500 pound capacity per pair in fully extended position....[More Information]
    
    
15. RAMPLETTE --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- Portable telescopic dual tracks for wheelchair access. Non slip material extends along entire length for tire grip. Extended length 6 feet 4 inches. Telescoped length 3 feet 5 inches. Inner channel width of each track 8 inches. 12.5 pounds each. Maximum load capacity 550 pounds per pair. ....[More Information]
    
    
16. RAMPSHORT. --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- Portable dual tracks for wheelchair access. Non slip material extends along entire length for tire grip. Length 3 feet. Inner channel width of each track 8 inches. 6.5 pounds each. Maximum load capacity 550 pounds per pair. ....[More Information]
    
    
17. SCOOTER RAMP --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Scooter Ramp is a portable ramp that uses two telescoping, folding tracks placed parallel to one another for use as a van ramp or building ramp. The anodized aluminum channels retract for transport and storage. CAPACITY: 660 pounds. DIMENSIONS: 6 feet 1 inch length extended, 3 feet 4 inches collapsed. WEIGHT: 24 pounds....[More Information]
    
    
18. THOR WHEELCHAIR RAMPS --- DISCONTINUED. (Verified 10/96) RETAINED IN DATABASE FOR REFERENCE. --- The Thor Wheelchair Ramps are lightweight aluminum portable ramps that come in folding and nonfolding models. The folding twin tracks fold in half for storage. Handles on side facilitate carrying and lifting. CAPACITY: Maximum capacity 350 pounds. DIMENSIONS: Available in lengths of 6, 8, and 10 feet with a maximum height difference of 36 inches, and in widths of 6 or 8 inches. Sides of each track are 2 inches high sides....[More Information]
    
    
19. TRIPLETTE --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- Portable telescopic dual tracks for wheelchair access. Non slip material extends along entire length for tire grip. Extended length 9 feet 3 inches. Telescoped length 3 feet 5 inches. Inner channel width of each track 8 inches. 19 pounds each. Maximum load capacity 550 pounds per pair. ....[More Information]
    
    
20. WHEELCHAIR RAMP --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Light weight folding metal tracks, fold sideways with handle, one piece, 36 inch length, 8 1/2 pounds....[More Information]
    
    
21. WHEELCHAIR RAMP --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Wheelchair Ramp is a pair of portable folding metal tracks designed to provide wheelchair access to low curbs or steps. The 2 pieces feature safety wheel guards on the side edges and built-in end anchors. DIMENSIONS: Available in several lengths; 5 inches wide....[More Information]
    
    
22. WHEELCHAIR RAMP. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Straight and folding tracks. Straight lengths: 18, 24, 36, 48, 72 inches. Maximum loading 300 pounds. Folding lengths: 24, 36, 48, 72 inches. Maximum loading 500 pounds. Both types of ramps have non skid surface....[More Information]
    
    
23. WHEELCHAIR RAMPS --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Lightweight portable fiberglass ramps. Fold in half for easy storage. Pair of ramps have aluminum cross bar which snaps in place for proper spacing, flexible ribbed tongue at ends. Non skid surface. Suitable for steps up to 14 inches high. Track is 59 inches long, 5 inches wide. Cross bar provides maximum of 29 inches between tracks. Weight 13 pounds....[More Information]
    
    

Page 1 of 1