Products are listed alphabetically.

Page 1 of 1

1. APPLE COMPUTER KEYGUARD AKG-1 --- DISCONTINUED. (Verified 1/94) RETAINED IN DATABASE FOR REFERENCE. --- The Apple Computer Keyguard fits over the keyboard allowing improved typing accuracy for individuals with difficulties in motor control. A bi-stable mechanical rocker over the shift and control keys allows the computer to be operated by one hand, a mouthstick, or headpointer....[More Information]
   
   
2. APPLE IIE/IIC COMPUTER KEYGUARD (MODEL C2110) --- DISCONTINUED. (Verified 07/94) RETAINED IN DATABASE FOR REFERENCE. --- Keyboard guard. Clear plastic keyguard fits over Apple IIe or IIc keyboard and allows the shift and control keys to be latched down. Placed into position with velcro....[More Information]
   
   
3. COMPUTER KEYGUARD (MODEL COG-M39) --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- Keyguard attaches to top of keyboard with velcro. Plastic overlay can be slid over the keyguard to expose only user-specified keyholes. Available for Apple II+/IIe/IIc/IIgs and Laser 128....[More Information]
   
   
4. IBM KEYGUARD --- DISCONTINUED. (Verified 11/2002) RETAINED IN DATABASE FOR REFERENCE. --- IBM KeyGuard is a molded keyboard overlay for individuals with upper-mobility disabilities or fine-motor coordination disabilities. Cutouts in the keyguard expose and isolate each key on the keyboard, thereby enhancing keying accuracy. Users can type with either their fingers or a typing stick. For persons lacking fine motor coordination or palsied movements, the keyboard eliminates the problem of sliding hands. SYSTEM ...[More Information]
   
   
5. KEYGUARD --- DISCONTINUED. (Verified 07/94) RETAINED IN DATABASE FOR REFERENCE. --- This Keyguard is designed for the single finger, mouthstick or headstick typist, preventing unwanted key presses. Clear plastic latching mechanisms are provided for the SHIFT and CONTROL keys. This keyguard is available for all Apple II models and the enhanced 101 key IBM keyboard. It attaches to the keyboard with Velcro, and may be removed at any time. The keyguard is $89.95 for Apple IIc and II+ computers, and $129.95 f...[More Information]
   
   
6. KEYGUARD IBM (MODELS 2470 & 2476) --- DISCONTINUED. (Verified 2/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Keyguard IBM, models 2470 and 2476, is designed to isolate keys and allow limbs to rest on the surface without depressing keys for individuals who use a mouth stick or head pointer, who have tremor, or who fatique easily. The keyguard is a metal shields with holes over the key positions which help prevent the unintentional activation of more than one key at a time. The keyguards mount with velcro or fastening tape f...[More Information]
   
   
7. KEYGUARD TEMPLATE KIT (MODEL COG-M39K) --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- Three blank overlays for a keyguard. Scoring tool for making specific keyholes. Please specify type of computer keyboard....[More Information]
   
   
8. KEYGUARDS --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. --- Keyguards are designed to stabilize and position the user's hand directly over the computer keyboard, and to promote accuracy in keypressing for single finger, headstick, or mouthstick typists. These keyguards consist of a scratch resistant panel of clear plastic with holes above each key position. For the Apple II models, latching mechanisms are provided to hold down the SHIFT, OPEN-APPLE, and CONTROL keys. The keygua...[More Information]
   
   
9. KEYGUARDS --- DISCONTINUED. (verified 04/96) RETAINED IN DATABASE FOR REFERENCE. --- Keyguards for the Unicorn Expanded Keyboards. 32 holes for the 32 square overalys. 64 hole keyguard fits the Unicorn Up and Running Full Access Overlay. The 128 hole keyguard is used when more keys are required. Model I and Model II keyguards fit Unicorn Keyboards Models I and II....[More Information]
   
   
10. PLASTIC KEYBOARD COVER --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. --- Plastic key board guard for computer or typewriter. Holes in plastic are positioned over desired input keys. Available in full and half size covers. Each cover is custom built from keyboard....[More Information]
    
    
11. POWER PAD OVERLAY (MODEL PPO-M44) --- DISCONTINUED. (Verified 11/2005) RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic overlay for power pad. 144 holes. Attaches to power pad case with velcro....[More Information]
    
    
12. POWERPAD KEYGUARD --- DISCONTINUED. (Verified 11/2010) RETAINED IN DATABASE FOR REFERENCE. --- PowerPad Keyguard is a plexiglass keyguard for the PowerPad (see separate entry). The keyguard has 128 keyholes and attaches with Velcro directly above the surface of the PowerPad. The user activates the PowerPad by pressing through any of the keyholes, reducing the number of unwanted keystrokes....[More Information]
    
    
13. REINFORCED KEYGUARD --- DISCONTINUED. (Verified 03/2005) RETAINED IN DATABASE FOR REFERENCE. --- This Keyguard is designed for the keyboard of the Epson HX-20 computer. It is designed to prevent the single finger, mouthstick, or headstick typist from making accidental key presses. The keyboard configuration will work with Adaptive Communication Systems' various communication aids based on the Epson HX-20 as well. COMPATIBILITY: For use on Epson HX-20 computers....[More Information]
    
    
14. SMITH CORONA CP MASK (MODEL 580551) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Keyguard fits over keys of typewriter to prevent fingers from dragging over and typing keys adjacent to desired letter....[More Information]
    
    
15. WORDS + COMPUTER KEYGUARD --- DISCONTINUED. (Verified 4/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Words + Computer Keyguard is designed to prevent accidental activation of the keyboard by covering it with firm support that has holes drilled over the keys. The Keyguard attaches to the computer with removable fasteners. Available for Datavue Spark, and Toshiba T1200....[More Information]
    
    

Page 1 of 1