Products are listed alphabetically.

Page 1 of 4    Next page »

1. 4-IN-1 SWITCH (MODEL 3134) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The 4-in-1 Switch, model 3134, is a touch switch designed for use by individuals with upper extremity disabilities. This four-colored momentary switch can be used to operate four adapted toys or other adapted appliances and devices from one location. The switch is activated with two ounces of pressure....[More Information]
   
   
2. 8 OUNCE PRESSURE SENSITIVE SWITCH (MODEL 24.1B) --- DISCONTINUED. (Verified 10/2009) RETAINED IN DATABASE FOR REFERENCE. --- The 8-ounce Pressure Sensitive Switch is a touch switch designed for use with the LTP Monitor by Consumer Care Products Inc. (See separate entry.) Activation of the switch requires 8 ounces of pressure. Includes lead wire and a quick disconnect plug. DIMENSIONS: 7 x 7 x7/8 inches....[More Information]
   
   
3. ACCESS KIT SWITCH AND MOUNTING ASSESSMENT KIT --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Kit Switch and Mounting Assessment Kit is a control switch assessment system including a variety of switch mounting hardware and an assortment of switches designed for use by individuals with upper extremity disabilities. This set includes a Yellow Accessible Switch, a Happy Face Buddy Button, a Red Big Buddy Button, a Grasp Switch, a Micro Light Switch, a Mini Cup Switch, a Pillow Switch, a Green Plate Switch...[More Information]
   
   
4. ACCESS PACK BIG BUDDY AND BATTERY ADAPTER --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Pack Big Buddy and Battery Adapter is a touch switch and battery interface control for toys designed to enable individuals with upper extremity disabilities to operate battery-operated toys and appliances using a single switch. This set includes one Big Buddy Button by Tash (see also separate entry) and a Battery Adapter by Access First (see also separate entry). The Battery Adapter is available in a choice of...[More Information]
   
   
5. ACCESSIBLE SWITCH --- DISCONTINUED. (Verified 01/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Accessible Switch is a large touch switch designed for use by individuals with upper extremity disabilities. This easy-to-mount round switch is activated with fourteen ounces of pressure anywhere on the surface and provides both tactile and auditory feedback on activation. COLOR: Red, yellow, blue, or green....[More Information]
   
   
6. ADJUSTABLE PRESSURE SWITCH APS. --- DISCONTINUED. (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE. --- Adjustable Pressure Switch is an air switch with adjustable sensitivity. An internal Call Buzzer is included....[More Information]
   
   
7. AIR CUSHION SWITCH --- DISCONTINUED. (Verified 07/94) RETAINED IN DATABASE FOR REFERENCE. --- The Air Cushion Switch is a touch switch that has sensitive air bellows which transmit a change in air pressure along a tube when pressed, thereby activating a switch. DIMENSIONS: 2.5 x 0.9 inches. WEIGHT: 8 ounces....[More Information]
   
   
8. AIR CUSHION SWITCH (MODELS ACS-1 & ACS-2) --- DISCONTINUED. (Verified 3/96) RETAINED IN DATABASE FOR REFERENCE. --- The Air Cushion Switches, models ACS-1 and ACS-2, are touch switches that consist of an air bellows with a tube leading from it to a switching unit. A light touch on the bellows sends air pressure to the switching unit, where the change in pressure activates a switch. Switching units are available with one or two sets of bellows for single or dual switching. The bellows have a threaded hole for mounting. The single switch ...[More Information]
   
   
9. BASIC TOUCH PLATE SWITCH --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Basic Touch Plate Switch is a touch switch designed for use by individuals with upper extremity disabilities. This sensitive switch requires only a light to activate a connected toy or appliance. The device remains activated as long as the plate is pressed; releasing the switch turns the device off. DIMENSIONS: The switch is available in 3 x 5 inches or 5 x 8 inches....[More Information]
   
   
10. BEAR SWITCH --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- The Bear Switch (formerly called Touch Switch Model 111) is a single touch switch activated by pressing the top surface. The switch can be set so that it is on only while being touched (momentary), or so that touching it once turns it on and touching it again turns it off (latching). DIMENSIONS: 5.5 x 4 x 1.5 inches. POWER: 9 Volt battery....[More Information]
    
    
11. BIG ORANGE PLATE SWITCH (MODEL 3097) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Big Orange Plate Switch, model 3097, is a momentary touch switch with more active surface than many plate switches, with room for the whole hand to be placed on it. This thin switch has a non-skid base, and requires only a light touch for activation to occur. The switch includes a 5-foot cable and has a 1/8-inch plug. DIMENSIONS: 4 x 6 x 3/16 inches. WARRANTY: 6 months....[More Information]
    
    
12. BODY SWITCH (MODEL BS-1) --- DISCONTINUED. (Verified 09/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Body Switch, model BS-1, is a single switch designed to be used by any body part for individuals with physical disabilities. It can be activated by 3 ounces of pressure and 1/8 inch of travel, by any convenient body part and can withstand up to 200 pounds of pressure. Activation is accompanied by an audible click. The Body Switch is intended for use with any device requiring a low current, single switch signal such ...[More Information]
    
    
13. BODY SWITCH CONTROLLER KIT (MODEL BS-5K) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Body Switch Controller Kit, model BS-5K, is a multi input switch selector designed to provide custom control arrangments using any good body control sites for individuals with physical disabilities, specifically those with Cerebral Palsy. The kit includes five Body Switches plus one CPM-9 manifold (see separate entries). Each body switch can be mounted using velcro or screws. Applied uses include wheelchair control, E...[More Information]
    
    
14. CAPACITIVE TOUCHPLATE INTERFACE --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Capacitive Touchplate system has five individual capacitive touch plate channels. The touch plate is operated from the body's capacitance and requires only contact, no pressure. Three versions are available that alter positions and sizes, to adapt for limited range of motion or force output. The system can control communication aids or wheelchairs. DIMENSIONS: 4.75 x 2.5 x 1.6 inches....[More Information]
    
    
15. CLIP ON BUMP SWITCH --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Push button switch mounted on clip for attachment on eyeglass frame, headband, belt, etc. Switch requires 2 ounces of pressure for activation. Momentary (device stays on only while pressure is applied on switch) or alternate (press and release to turn on, press and release to turn off) actions. Switch rated at 2 amps, 24 volts. 40 inch flexible cord with 1/8 inch mini plug....[More Information]
    
    
16. COIL SPRING WOBBLE STICK SWITCH --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Coil Spring Wobble Stick Switch is a touch switch activated by any movement of a 4.5-inch flexible coiled spring. The base is oak. The switch is available for vertical mounting, with either normally open or normally closed contacts. DIMENSIONS: 6 x 6 x 8 inches. WEIGHT: 1.25 pounds....[More Information]
    
    
17. CRESTWOOD TOUCH LATCH SWITCH (MODEL 3078) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Crestwood Touch Latch Switch, model 3078, is a latch switch designed for use by individuals with spinal cord injury and other severe physical disabilities. The switch stays on indefinitely after it is touched once. A second touch turns the switch off. An audible click sounds when the switch is activated or deactivated. The switch includes a 6-foot cable and can be used with an adapted television, radio, tape recorde...[More Information]
    
    
18. CUSHION SWITCH --- DISCONTINUED. (Verified 6/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Cushion Switch is a touch switch designed to control adapted toys and appliances for individuals with upper extremity disabilities. Designed for those with limited limb and head movement, the switch is encased in foam and enclosed in a removable, washable velvet bag....[More Information]
    
    
19. CYLINDRICAL TOUCH SWITCH PLUS TOUCH SWITCH POWER SUPPLY (MODEL 5300) DISCONTINUED. (Verified 2/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Cylindrical Touch Switch is a touch switch activated by skin contact for individuals with vere severe physical disabilities. One switch is activated by touching (no force required) the barrel, and the other by touching the cone at the top. POWER: Switch must be powered by the Touch Switch Power Supply. The Power Supply requires an A/C adapter or 9V battery for operation (both included). The Cylindrical Touch Switch plugs...[More Information]
    
    
20. DELUXE PADDLE SWITCH II AND MINI DELUXE PADDLE SWITCH --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Deluxe Paddle Switch is a single touch switch activated by pressing on a 4-inch square acrylic plate. Activation pressure is adjustable. The Deluxe II Paddle Switch ($48.50) has a captive lip on the plate to prevent the plate from being raised inadvertently. The Mini Deluxe Paddle Switch ($41.00) is 2.25 x 4 inches and is designed for mounting on a wheelchair. DIMENSIONS: 6 x 6 x 1 inches. WEIGHT: 16 ounces....[More Information]
    
    
21. DEVICE-ACTIVATING SWITCHES (MODELS PC 7608, PC 7609B, PC 7607 & PC 7609) --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Device-Activating Switches are touch switches available in momentary or switch latch modes to control adapted toys, appliances, and devices. Models PC 7608 and PC 7609B are latch switches which activate the device with the first touch and turn it off with the next. Models PC 7607 and 7609A are momentary switches which engage the device only as long as the switch is depressed; releasing the switch turns the device off...[More Information]
    
    
22. DIRECTIONAL CONTROL --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- Directional Control is a set of five membrane switches grouped together in a low profile case. The 2.25-inch keys are slightly recessed. Directional Control can be used with devices that accept standard joystick control....[More Information]
    
    
23. DOUBLE PADDLE SWITCH --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Double Paddle Switch ($77) is a touch switch consisting of a 12-inch wooden base with 4-inch plates at both ends. Two 3-foot output cords (included) allow two devices to be controlled. A bilateral version of the switch is also available ($79); contact manufacturer for details. DIMENSIONS: 12 x 4 inches....[More Information]
    
    
24. DOUBLE PUSH PANEL --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Double Push Panel is a pair of plexiglass panels mounted on a wooden base. Pushing either panel activates a switch. An audible click is heard when the switch is activated. DIMENSIONS: 7.5 x 15.7 inches....[More Information]
    
    
25. DUAL BODY SWITCH (MODEL BS-2) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Dual Body Switch, model BS-2, is a buttonswitch designed to be activated with light touch by any part of the body for individuals with little or no mobility or strength. The two body switches each require about 12 ounces of force and travel less than 1/8 inch. They are connected using a single Cinch P-306 6 pin plug. They have an audible click feedback and can be mounted using screws or velcro. Suggested usage include...[More Information]
    
    

Page 1 of 4    Next page »