Products are listed alphabetically.

Page 1 of 1

1. ACTIVEWRAP THERAPY SHOULDER WRAP The ActiveWrap Therapy Shoulder Wrap is a shoulder brace designed for positioning and controlling the shoulder girdle and trunk flexion or rotation. The wrap assists with muscle, joint, and tendon pain. Each wrap includes two latex-free, non-toxic, microwave- and freezer-safe hot/cold packs. The packs can be configured within each wrap in order to deliver either heat or cold to desired areas. These wraps are constructed of medical plush with Lycra trim for comfort and neo-Lycra for stretch and b...[More Information]
   
   
2. CLAVICLE STRAP. Clavicle strap for clavicular immobilization. Figure 8 design with webbing straps, foam padded triangular rear buckle. Straps are double padded around shoulder and axilla with foam and felt. Richards heavy model has velcro closures. Improved Heavy Model has extra pressure sensitive area to permit wide range of adjustments. Available in sizes extra extra small 20 by 2 inches, extra small 24 by 2 1/2 inches, small 31 by 2 1/2 inches, medium 36 by 3 1/2 inches and large 40 by 4 inches....[More Information]
   
   
3. Converting a Knee Supporter into an Effective Shoulder Support Device. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Shoulder support adapted from an elastic knee support, devised to support an injured shoulder without incapacitating the arm. Tubular elastic knee support with a V cut out leaving about a 2 inch circumferential remnant which fits around the upper arm. Cotton webbing and a strap long enough to fasten around the chest are sewn along the top edge of the support. Another foam pad under the opposite arm can be used to hold the strap lower on the chest. ...[More Information]
   
   
4. MOR-LOC SOFT TOUCH CLAVICLE The Mor-Loc Soft Touch Clavicle is a shoulder brace with 2 wide anterior straps designed to fit into the delto-pectoral grooves and a single narrow strap that crosses midchest. The straps fit through a D-ring in the back and fasten in the front. SIZES: Small through Extra Large....[More Information]
   
   
5. OMOTRAIN Knitted bi-elastic shoulder support for the treatment of tendonitis, bursitis and other painful conditions. Wide elastic strap figure 8 harness, adjustment buckles over lower part of sleeve and in the front of the shoulder strap on the unaffected arm. 6 sizes. Fit right or left....[More Information]
   
   
6. ORTHOCARE K.W. HUMERAL AND FOREARM ABDUCTION SPLINT (MODEL 2055) The Orthocare K.W. Humeral and Forearm Abduction Splint ##2055 is a shoulder brace designed to immobilize the humerus and forearm in abduction following surgery. This adjustable brace consists of a foam block contoured to fit under the axilla and around the rib cage. The splint design allows the humerus to maintain 40 degrees abduction. If a greater angle is required, a wedge is provided that has a Velcro backing to be attached to the medial side of the splint. The humerus and forarm are retaine...[More Information]
   
   
7. ORTHOCARE K.W. SHOULDER SPLINT (MODEL 2056) The Orthocare K.W. Shoulder Splint ##2056 is a modified triangular abduction splint designed for use when there is mild tension on a repaired supraspinatus tendon but the external rotators are intact, or during the course of treatment on larger tears in which the large K.W abduction brace is used initially, followed by application of the smaller K.W. triangular splint at 4 weeks. When at rest, the arm may be passively elevated. The wrist is attaced to the splint with padded Velcro straps, and a ...[More Information]
   
   
8. OVER THE SHOULDER HUMERUS FRACTURE BRACE The Over the Shoulder Humerus Fracture Brace is a two-piece fracture orthosis designed to provide immobilization and protection of the shoulder. Made of low-density, foam-lined, perforated polyethylene plastic, this brace features an overlapping clam shell design to enable it to be worn on the right or left arm. The overlapping shells allow for ease of adjustment to accommodate volumetric tissue changes. Two presewn cotton stockinette liners are included. SIZES: Small, medium, large, and extra l...[More Information]
   
   
9. RICHARDS CLAVICLE STRAP. Clavicle strap for clavicular immobilization. Figure 8 design made of needle punched foam covered with stockinette. cotton webbing straps, rear foam padded triangle buckle, and pressure sensitive closures. Washable. Range of sizes....[More Information]
   
   
10. RICHARDS SHOULDER IMMOBILIZER. Shoulder immobilizer, straps around body, lower arm, and forearm. Made of 6 inch wide elastic with velcro closures. womens style is contoured below bust. Sized by chest measurement. Available in range of womens and mens sizes....[More Information]
    
    
11. ROLYAN AQUAFORM HUMERUS FRACTURE BRACE (MODELS A175130 thru A175135) The Rolyan AquaForm Humerus Fracture Brace, models A175130 thru A175135, are shoulder braces designed for use by individuals with midshaft humeral fractures. Made of perforated Aquaplast-T splinting material (see entry) and available the right or left arm, the splints are pre-cut for convenience and is radiolucent to permit X-rays without removal, custom molded, and remoldable to accommodate changes in condition. A zipper permits ease of application and removal. SIZES: Small, medium, and large...[More Information]
    
    
12. SHOULDER GUARD OVER THE SHOULDER HUMERUS FRACTURE BRACE The Shoulder Guard Over the Shoulder Humerus Fracture Brace is a fracture orthosis designed to provide protection of the deltoid area while allowing functional range of motion of the shoulder and elbow. Made of low-density, foam-lined, perforated polyethylene plastic, this brace is available in models for the right and left arm and features an extended posterior shell. It also features overlapping anterior and posterior shells enabling ease of adjustment to accommodate volumetric tissue changes....[More Information]
    
    
13. THERATOGS ULTRA ADULT SHOULDER POSITIONING SYSTEM (MODELS GSP403, GSP603, GSP613, GSP623, GSP703, GSP713, GSP723 & GSP733) The TheraTogs ULTRA Adult Shoulder Positioning System, models GSP403, GSP603, GSP613, GSP623, GSP703, GSP713, GSP723 & GSP733, is a hemiplegic shoulder subluxation support and kyphosis and low back orthosis designed for use by children who have postural, scapular and shoulder misalignments due to hemiplegia or other conditions. It is made with GoldTone material that has stretch, tension and rebound properties specifically formulated for the demands of biomechanical retraining and support. This ...[More Information]
    
    
14. THERATOGS ULTRA POSTURE AND TORSO ALIGNMENT SYSTEM (MODELS GPTA110, GPTA210, GPTA310 & GPTA410) The TheraTogs ULTRA Posture and Torso Alignment (PTA) System, models GPTA110, GPTA210, GPTA310 and GPTA410, is a kyphosis, low back and spinal orthosis, shoulder brace, and pressure garment and designed for use by children and adults of short stature with sensory integration, emotional, or neurological disabilities, posture issues, scapular and shoulder misalignments, and autism. The Full Body System is made with GoldTone material that has stretch, tension and rebound properties specifically for...[More Information]
    
    
15. THERATOGS ULTRA UPPER EXTREMITY SYSTEM FOR PEDIATRIC HEMIPLEGIA (MODELS GHE106, GHE206, GHE306 & GHE406) The TheraTogs ULTRA Upper Extremity System for Pediatric Hemiplegia, models GHE106, GHE206, GHE306 and GHE406, is a hemiplegic shoulder subluxation support and kyphosis and low back orthosis designed for use by children who have torso, scapular, shoulder, elbow, and forearm misalignments due to hemiplegia or other conditions. It is made with GoldTone material that has stretch, tension and rebound properties specifically formulated for the demands of biomechanical retraining and support. This su...[More Information]
    
    
16. UNI-VERSATIL SLING AND SWATHE Shoulder immobilizers. Sling type immobilizers in canvas, denim, cotton, muslin, Dacron, webbing or foam material. Pediatric to extra large sizes....[More Information]
    
    

Page 1 of 1