Products are listed alphabetically.

Page 1 of 1

1. ARTHRITIS DAILY HELPER KIT (MODEL 557183) The Arthritis Daily Helper Kit, model 557183), combine products designed for use by individuals with arthritis, fine motor or grasping disabilities or limited hand dexterity. Intended to assist arthritis sufferers with daily tasks, this kit features the following item: Dr. Grip Pen, Rubber Doorknob Extension, EZ Key Turner, Button Hook with Zipper Pull, and Shoe Buttons (see separate entries). ...[More Information]
   
   
2. BUTTON AID (MODEL R612 & R613) The Button Aid, models R612 and R613, is a button hook with a wire loop to assist individuals the use of one hand or limited finger dexterity to fasten buttons. Available in models for small or large buttons. The handle is made of wood. DIMENSIONS: The handle is 6.5 inches long....[More Information]
   
   
3. BUTTON HOOK (MODEL BK2022) The Button Hook is a button aid designed for use by individuals with upper extremity disabilities or fine motor disabilities, or those with use of only one hand. Features include a rubber handle and a wire loop that the user can slip through the button hole, grab the button wire, and pull button back through the button hole. ...[More Information]
   
   
4. BUTTON HOOK / ZIPPER PULL (MODELS DA-5130, DA-5131, DA-5132, & DA-5133) The Button Hook / Zipper Pull is a dressing aid designed for use by individuals with fine motor or grasping disabilities or arthritis. This small device assists in button and zipper fastening. It incorporates a stainless steel hook at one end and a "C" hook at the other. DIMENSIONS: Length is 160 millimeters (model DA-5130), 166 millimeters (model DA-5133), 205 millimeters (model DA-5131), or 210 millimeters (model DA-5132). WEIGHT: 11 grams (model DA-5130), 25 grams (model DA-5131), 35 grams (m...[More Information]
   
   
5. BUTTON HOOK / ZIPPER PULL COMBO (MODELS 30086 & 30085) The Button Hook/Zipper Pull Combo is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the handle has a button hook imbedded in it and the opposite end holds a zipper pull. Model 30086 has a standard handle and Model 30085 has a ribbed handle. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days from the date of purchase....[More Information]
   
   
6. BUTTON HOOK/ZIPPER PULL COMBO (MODEL NC28635) The Button Hook/Zipper Pull Combo, model NC28635, is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the birch handle has a button hook imbedded in it and the opposite end holds a zipper pull. DIMENSIONS: The device is 8.25 inches long and the handle is 5/8 inch in diameter....[More Information]
   
   
7. BUTTON HOOKS The Button Hooks are dressing aids designed for use by people with hand and finger disabilities. The hooks feature a poited wire loop that is slipped through the button hole to grasp the button; once the button is grasped, pull it back through the hole to finish buttoning. Available models include a wood handle (no. 2008), a built-up foam handle (no. 2009), a flexible handle for varios positons (no. 2011), large hooks (no. 2014), a sure han button hook (no. 2017), a rubber handle (no. 2022), a K...[More Information]
   
   
8. COMBINATION BUTTON AID / ZIPPER PULL The Combination Button Aid / Zipper Pull is designed for use by individuals with fine motor disabilities or limited grasping disabilities. The built-up soft grip rubber handle has a formed wite buttoning aid at one end and a brass hook for pulling zipper tabs at the other. DIMENSIONS: 8.75 inches long....[More Information]
   
   
9. GRIP HANDLE BUTTON/ZIPPER PULL COMBO (MODEL NC28616) The Grip Handle Button Hook/Zipper Pull Combo is a button hook and a zipper pull designed to assist people with physical disabilities with dressing. One end of the ribbed rubber handle has a button hook imbedded in it and the opposite end holds a zipper pull. DIMENSIONS: The unit is 8.25 inches long and the handle is 1 inch in diameeter....[More Information]
   
   
10. HOSMER BUTTON HOOK The Hosmer Button Hook is a hand-held button aid designed to assist individuals with dressing. The hook's wire section slides through the button hole and hooks onto the button; the button is then pulled through the button hole. DIMENSIONS: Device is 6 9/16 inches long....[More Information]
    
    
11. MADDADAPT BUTTON LOOP (MODELS H73884 & H73885) The Maddadapt Button Loop is a buttonhook designed to assist individuals with the use on only one hand or arm to fasten button closures. The device has a guilt-up plastic handle with sliding rings for finger positioning. Model H73884 is for small buttons; model H73885 is for larger buttons....[More Information]
    
    
12. POCKETDRESSER The PocketDresser is a combination buttonhook, zipper pull, and button aid designed for use by individuals with fine motor or upper extremity disabilities. The device incorporates a large buttonhook, a small buttonhook, a zipper pick, and a closed loop buttoning aid, all of which fold into a pocket-knife-style handle. The zipper pick functions as a zipper pull and can be used to free a burried zipper tab or untie knotted shoelaces. A spring-tensioned design secures the tools to the handle and al...[More Information]
    
    
13. REGULAR HANDLE BUTTON AID (MODEL 2008) The Regular Handle Button Aid, model 2008, is a dressing aid designed for use by individuals with fine motor or grasping disabilities or arthritis. This latex free button aid features a wire loop to assist in fastening buttons for those with one hand or impaired finger dexterity. The user can slip the wire hook through the button hole, grab the button with the wire and pull the button back through the hole....[More Information]
    
    
14. RUBBER HANDLE BUTTON HOOK WITH ZIPPER PULL (MODEL A720301) The Rubber Handle Button Hook with Zipper Pull, model A720301, is designed to aid individuals with use of one hand or with upper extremity or fine motor disabilities to fasten buttons and pull zippers. One end of the rubber handle has a wire loop that slips over the button to pull it through the buttonhole. The hook at the opposite end of the handle slips into the eye of the zipper tab for pulling zippers. DIMENSIONS: The handle has a diameter of 0.75 inch....[More Information]
    
    
15. SUPERGRIP BUTTONHOOK (MODEL A72051) The Supergrip Buttonhook, model A72051, is designed to aid individuals with use of one hand or with fine motor disabilities in fastening buttons. The unit consists of a large, textured, built-up handle of rubber-like material that resists slipping with a wire loop at one end that slips over the button to pull it through the buttonhole....[More Information]
    
    
16. SURE HAND BUTTON HOOK / ZIPPER AID (MODEL A9231) The Sure Hand Button Hook/Zipper Aid, model A9231, is designed to aid individuals with use of one hand or with fine motor disabilities to fasten buttons and pull zippers. One end of the cushioned handle has a wire loop that slips over the button to pull it through the buttonhole. The hook at the opposite end of the handle slips into the eye of the zipper tab for pulling zippers. DIMENSION: Handle has a diameter of 1.5 inches....[More Information]
    
    
17. ZIPPER & BUTTON PULLER (MODEL EN27CRD) The Zipper and Button Puller, model EN27CRD, is a combination button aid and zipper pull designed for use by individuals with arthritis or limited manual dexterity or strength. This folding device features a large plastic handle with a D-shaped hole at one end and a slim metal hook at the other end. The hook slips into the holes on a button to pull it through the button hole or into the hole on a zipper tab to pull the zipper up or down. The unit folds to half-length to fit into a pocket or purs...[More Information]
    
    

Page 1 of 1