Products are listed alphabetically.

Page 1 of 3    Next page »

1. ADJUST A SEAT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Seat and back unit with inflatable lumbar section. For use in plane, automobile, work chair, wheelchair. Inflatable lumbar unit may be raised or lowered along velcro like strips to accommodate individual needs. Hand held squeeze bulb allows customized inflation pressure. Light weight. Insert is quilted and covered with fabric....[More Information]
   
   
2. ADJUSTABLE BACK SUPPORT (MODEL D2063) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back support can be used in any chair. 2 cushions for lumber and shoulder areas attached to back cushion with velcro, can be placed where needed. Velour cover. Weight 22 ounces....[More Information]
   
   
3. ADJUSTABLE SUPPORT ORTHOPEDIC SEAT (MODEL B2 15) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support seat. Adjustable crossbar behind the seat supports curve of back with spring action design, spring steel frame, firm foam padding and removable velour cover. Width 15 inches. Depth 14 inches. Height 18 inches....[More Information]
   
   
4. BAC-SEAT --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Bac-Seat is a complete back and seat support system designed to provide superior weight distribution, extra air circulation, and lumbar support. provides firm, angled lumbar support. Bac-Seat consists of a convoluted seat cushion and a firm, angled back support that has an adjustable lumbar pad. Fabricated of dense inner-foam with cloth cover. Portable. DIMENSIONS: Back 16x16 inches; Seat 16x16 inches. COLORS: Navy,...[More Information]
   
   
5. BACK AIDE (MODEL 1125) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Back support and seat combination. Foam covered lightweight spring steel. Seat with breathable fabric cover. Seat 16 by 15 inches. Back 16 by 19 inches. Weight 5 pounds....[More Information]
   
   
6. BACK BUDDY --- DISCONTINUED. (Verified 7/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Back Buddy is a back support cushion designed for promoting good posture and reducing fatigue and slouching. The non-allergenic support rests snugly against the seat back. It has a one-piece molded foam construction and built-in tempered wire frame support. A 100% nylon cover is bonded to the foam underpad. The elastic strap attaches to standard chairs and auto seats. A lumbar pillow fits between the user's lower bac...[More Information]
   
   
7. BACK BUDDY JUNIOR --- DISCONTINUED. (Verified 7/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Back Buddy Junior is a back support cushion with molded lateral supports designed for promoting good posture and reducing fatigue and slouching. The support rests snugly against the seat back for lumbar or thoracic support. It features a 1-piece molded foam construction, built-in tempered wire frame support, and a 100% nylon cover bonded to the foam under-pad. The cover is non-allergenic and removable. An adjustable ...[More Information]
   
   
8. BACK CUSHION & LUMBAR CUSHION --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- Flat back cushion, constructed of high density foam with a convoluted surface. Lumbar cushion with smooth foam and side supports. Both models include covers....[More Information]
   
   
9. BACK EASE --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- Back Ease is an orthopedic back support cushion designed to promote an upright sitting posture for people with weak or injured backs. This cushion has an extra firm side and a cushioned side and it may be positioned either horizontally or vertically. The cushion wipes clean with damp cloth and can be used in a chair, wheelchair, automobile, truck, boat, or on an airplane. WARRANTY: Money back guarantee...[More Information]
   
   
10. BACK PIL O --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support cushion. Non allergenic convoluted egg crate type foam that supports lower back and sides. No cover....[More Information]
    
    
11. BACK REST & ECONOMY BACK REST COMFORT SUPPORTS --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- The Back Rest and Economy Back Rest Comfort Supports are back support cushions designed to be used on a chair or car seat. The cushions are made of high-density foam and come in either contoured or flat styles. A washable cover is standard. OPTIONS: A zippered cover, colored covers, and a strap are also available. DIMENSIONS: 12 x 14 inches....[More Information]
    
    
12. BACK SUPPORT CUSHION (MODEL 1091) --- DISCONTINUED. (verified 1/96) RETAINED IN DATABASE FOR REFERENCE. --- Vinyl cover over cushioned metal frame, can be bent by hand to modify contour. Back straps to hold in place. Seventeen by 20 inches high....[More Information]
    
    
13. BACK UNIT (MODEL 1123B) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back support pillow for travel or sitting filled with pressure blown Trevira fiber, can be fluffed back to original shape, washable. Washable quilted satin or polyester covers available....[More Information]
    
    
14. BACK-EZE ADJUSTABLE BACK CUSHION (MODEL H76672) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Vinyl inflatable back cushion. Zippered washable cloth cover with 22 1/ 2 inch fabric belt with weight in end. Position cushion and drape belt over back of chair to keep cushion in place....[More Information]
    
    
15. BACKMATE (MODEL 1600) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Lumbar support, relieves low back pain through proper sitting posture. Constructed of furniture grade foam, covered with simulated sheep skin. Strapping system for adjustable positioning on chair back....[More Information]
    
    
16. BACKMATE LUMBAR SUPPORT (MODEL B2 20) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lower back support cushion covered with simulated fleece. Contoured. Elastic strap to fasten to back of chair....[More Information]
    
    
17. BACKSAVER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back support cushion with molded lumbar ridge for direct support to the spinal column. polyurethane foam covered with washable cotton polyester fabric. Carrying handle. Weight, less than one pound....[More Information]
    
    
18. BACKSAVER I & BACKSAVER II --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Back support, contoured foam with washable nylon cover. Can also be used for neck support. Backsaver II has an inflatable bladder to adjust firmness of support. Can be used with chairs or cars, has strap with buckle to attach to back of seat....[More Information]
    
    
19. BEADEASY BACK --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- The BeadEasy Back is a back support cushion designed for flexible scholiosis or mild fixed scholiosis, and is suitable for people who use wheelchairs. The cushion is custom made to individual dimensions using a molded system, which can be finished in 15 minutes. The cushion uses a plywood base to hold a platalon bag filled with foam pellets. The bag is molded to fit the individual's dimensions by mixing a special adhesi...[More Information]
    
    
20. BETA BACK CUSHIONS (MODEL 601-606) & BETA PLUS BACK CUSHIONS (MODEL 701-706) --- DISCONTINUED. (Verified 06/2006)RETAINED IN DATABASE FOR REFERENCE. --- Lumbar back support. Beta cushion is foam half roll, gives support only where person needs it. 6 inches wide by 3 inches deep by 14 inches long. Strap optional. Green, brown, blue, maroon, black or gray. Beta Plus has rigid insert and floating beads for firm support. Covered with soft foam outer layer. Strap optional. Same dimensions and colors as Beta model described above....[More Information]
    
    
21. BETTERBACK ORTHOPEDIC MULTI-PURPOSE SEAT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. ---Seat support (combined back & seat) for use in car, at home or in the office. Molded contoured wood frame with foam padded upholstery. Used sitting, reclining or lying down. Folded 16 inches wide, 19 inches long. Weight 4 pounds....[More Information]
    
    
22. CONTOUR BACKRESTS --- DISCONTINUED. (Verified 07/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Contour Backrests are lightweight, portable back support cushions designed to properly support the spine to alleviate back pain for people who use wheelchairs or who sit for long periods or who read in bed. The plushly padded polycarbonate frame conforms to the shape of the user's back and the lumbar support pad can be adjusted to fit lower back contours. The cushions feature a washable, non-allergenic cover and a po...[More Information]
    
    
23. CONTOURED LUMBAR BACK CUSHION (MODELS 5614 & 5602) --- DISCONTINUED. (Verified 12/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Contoured Lumbar Back Cushion is a back support cushion designed to relieve back pain at home, work, and in the car. The cushions are made of molded polyfoam. Covers are available in Brown Twill (##5614) or Plaid (##5602). DIMENSIONS: 13 x 14 inches....[More Information]
    
    
24. CONTOURPEDIC BACKREST (MODELS 0008 & 0008D) --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- Shaped, back support for lumbar support. Vinyl covered foam. One size....[More Information]
    
    
25. CUSTOM MOLDED BACK ORTHOSIS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Custom molded back support. Moldable insert and tapered elastic binder with velcro closures. Foam padding insulates insert during forming process. Model 500XS for waist size 20 to 24 inches, model 500S for waist size 24 to 32 inches, model 500M for waist sizes 32 to 42 inches, and model 500L for waist size 42 to 54 inches....[More Information]
    
    

Page 1 of 3    Next page »