Products are listed alphabetically.

Page 1 of 2    Next page »

1. ADA 120 AUDIO VISUAL ALERT SYSTEM --- DISCONTINUED. (Verified 11/2006) RETAINED IN DATABASE FOR REFERENCE. --- The ADA 120 Audio Visual Alert System is a flashing light and enhanced audible doorbell signal. This unit was developed to convert any existing apartment house intercom system into one which will assist people with hearing disabilities. The unit is activated when a person pushes an apartment button on the entrance panel. Inside the apartment, the system's strobe light will flash for up to three minutes, and a buzzer (up...[More Information]
   
   
2. ALERT PLUS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Alert Plus is an all-in-one unit multiple signal system for persons with hearing disabilities. The unit is equipped with a strobe light, bed shaker, and loud audio buzzer options to alert an individual with a hearing disability to smoke detector alarm activation, telephone ringing, door knocking, and alarm clock sounding. Plugs into wall socket....[More Information]
   
   
3. ALL PURPOSE STROBE LIGHT (MODEL 641) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Strobe light for use with any telephone, doorbell, burglar, smoke or nursery sound monitoring system that uses a 110 volt AC light as a signaler. Vibrant white light is clearly visible anywhere in room, even on bright sunny day. Reflects off walls and down hallways. 9 by 9 by 6 inches....[More Information]
   
   
4. BEJED PIONEER SOUND PROBE --- DISCONTINUED. (Verified 10/93) RETAINED IN DATABASE FOR REFERENCE. --- Portable unit which converts sound into light flashes, for use with telephone conversations. Unit is turned on when pickup microphone is attached to receiver and plugged into the jack of sound probe. Brightness of light varies with loudness. User must be able to speak but yes or no responses are received by user through flashing light. Yes produces 1 flash, no-no produces 2 flashes....[More Information]
   
   
5. CA-100 VISUAL PHONE ALERT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Ameriphone CA-100 is a flashing light telephone signal that signals incoming phone calls by flashing an attached lamp or light on and off. This device works whether the lamp is in the on or off position, and has a lamp control switch....[More Information]
   
   
6. CALL ALERT MASTER UNIT (MODEL CA-200M) --- DISCONTINUED. (Verified 08/2005)RETAINED IN DATABASE FOR REFERENCE. --- The Call Alert Master Unit, model CM-200M, is a telephone signal indicator designed to provide visual indication of an incoming voice telephone or text telephone call to persons with hearing disabilities. A lamp is plugged into the device and the lamp to flashes when the phone rings. OPTIONS: Call Alert Remote Receiver Unit, model CA-200RX. WARRANTY: One-year factory warranty....[More Information]
   
   
7. CLOVER FLASHING STROBE ALARM DETECTOR --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Alarm detector fills room with powerful bursts of strobe light when it hears the sound of a smoke detector, alarm clock, kitchen timer, etc. Effective only for continuous buzzing noises; not appropriate for sounds, such as doorbells, which go off and on. Strobe must be within 15 feet of sound. Electronic technology enables it to screen out background noises such as telephones, voices, etc. Plugs in directly, no lamp required or adjustment...[More Information]
   
   
8. COMBO SOCKET ADAPTER/WALL TAP (MODELS GE1734 & 600-1) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Combo Socket Adapter/Wall Tap is a wall hugger tap that holds up to three cords (ie., telephones, TDDs, and etc.) The socket adapter portion allows any standard sized light bulb to be plugged into it thus becoming an alerting device for the telephone, doorbell, and etc....[More Information]
   
   
9. COMPACT STROBE LIGHT (MODEL 651) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Compact strobe light can be used with any telephone, doorbell, burglar, smoke or nursery sound monitoring system that uses a 110 volt AC light as a signaler. Vibrant white light is clearly visible anywhere in a room even on sunny day. Compact size, 3 by 5 by 2 inches, can be placed anywhere (walls, ceiling, etc.). Good for travel....[More Information]
   
   
10. CONCEPT I VISUAL ALERTING SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signal system flashes a light when there is a door knock, phone ringing or smoke alarm sounding. Transponder is attached to desired surface with double sided adhesive tape to detect vibrations. Vibrations trigger loud tone that is detected by the receiver. Receiver flashes a light plugged into it. Receiver features sensitivity and flash control and is plugged into 110 volt AC wall outlet. Transponder measures 2 by 2 by 1.25 inches; receiv...[More Information]
    
    
11. EMERGENCY RESPONSE INDICATOR --- DISCONTINUED. (Verified 4/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Emergency Response Indicator is a vehicle emergency alert device designed to signal motorists who are deaf or hard of hearing that an emergency vehicle is nearby. The unit works by attaching a small microphone to the windshield of the car with a suction cup. This is connected to the handheld device on the dashboard that lights up when the microphone picks up the siren of an emergency vehicle. The unit comes with a se...[More Information]
    
    
12. FIREX HEARING IMPAIRED ALARM KIT (MODEL 252) --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Firex Hearing Impaired Alarm Kit, model 252, is a flashing light signal designed for use by individuals who are deaf or hard of hearing. This kit includes a relay module (model 501) that responds to a smoke alarm, a carbon monoxide alarm, or both (not included), a strobe light (model 240B), and a wiring instruction sheet. Up to five additional FireX model 240 or 240B strobes can be operated in addition to the strob...[More Information]
    
    
13. FIREX HEARING IMPAIRED SMOKE ALARM KIT (MODEL 242) --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Firex Hearing Impaired Smoke Alarm Kit, model 242, is a smoke alarm and flashing light signal designed for use by individuals who are deaf or hard of hearing. This kit includes a 120-volt alternating current (AC) smoke alarm (model 41216), a relay module that responds to the smoke alarm (model 499), a strobe light with "FIRE" lettering (model 240), and a wiring instruction sheet....[More Information]
    
    
14. FLASHER BUTTON (MODEL FB2008) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Flasher Button, model FB2008, is designed to turn any household lamp or bulb socket into an attention getter. Place the Flasher Button in the socket before screwing in the light bulb. The device causes bulb to flash on and off....[More Information]
    
    
15. FLASHING LIGHT SMOKE DETECTORS --- DISCONTINUED. (Verified 02/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Flashing Light Smoke Detector is a flashing light signal and smoke alarm designed to provide both visual and auditory indications of the presence of smoke. This photoelectric smoke detector features a 90 decibel signal and a strobe light with red "FIRE" lettering. A 9-foot cord and mounting hardware for wall mount are included....[More Information]
    
    
16. FLASHING STROBE ALARM DETECTOR (MODEL 769) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Alarm detector emits powerful bursts of light when activated from the sounds from smoke detector, burglar alarm, or other sustained alarm sounds. Place strobe detector within 15 feet of smoke detector with strobe facing room. Uses 110 volt AC; has indicator light which displays functioning. Features 4 by 1.5 by 2.25 inch white plastic case with built in microphone. Portable for travel use....[More Information]
    
    
17. FONE FLASHER & FONE FLASHER 2 --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- The Fone Flasher is a telephone signaler designed to flash a lamp when the phone rings for individuals who are deaf or hard of hearing. The Fone Flasher lets you plug the lamp directly into it. The Fone Flasher 2 gives you a choice of how to be alerted to incoming calls: by its built in strobe flasher only, by the ringer only, or by both. This is for use in one room only. WARRANTY: One year limited....[More Information]
    
    
18. GLOBE STROBE (MODEL 661) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Economical strobe light produces a softer light than other strobes, but more effective than ordinary flashing lamp. For use with telephone, doorbell, burglar, smoke or nursery sound monitoring systems that use a 110 volt AC light as a signaler....[More Information]
    
    
19. HARD WIRED FIRE BELL TRANSMITTER (MODEL FB-6672), WIRELESS FIRE ALARM RECEIVER (MODEL FB-R72) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Hard Wired Fire Bell Transmitter, Model FB-6672, is designed to supplement a conventional fire bells, with a visual alarm. The Transmitter has a converter cord which is spliced and attached to the existing 120 volt fire bell. A light bulb is screwed into a socket and plugged into the transmitter. The remote receivers are plugged into any electrical outlet. When the fire bell is activated the fire bell causes the ligh...[More Information]
    
    
20. KNOCK LIGHT --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Knock Light is a doorbell signal for persons with hearing disabilities that attaches to the back of the door with hook and loop fastening tape. When someone knocks on the door, the incandescent bulb flashes. No wires are used, and a doorbell switch is not needed. This portable, self-contained sensor and light may be used in the home to eliminate missed visitors or deliveries, or in hotels and bathrooms to maintain s...[More Information]
    
    
21. LIGHT ALARM (MODEL 5693) --- DISCONTINUED. (Verified 05/2006) RETAINED IN DATABASE FOR REFERENCE. --- Battery-powered smoke alarm with xenon strobe light, provides extra protection for residential use. Designed to compliment existing smoke detectors, especially in bedrooms and other slipping areas. It has solid state circuitry, is UL approved, and meets National Fire Protection Association Standards. Alarm output is 85 decibels at 10 feet, strobe output is 2.5 candella at 60 flashes per minute. It is equipped with a tes...[More Information]
    
    
22. MICROLERT (MODELS H-100, H-200, & H-200F) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Remote control flashing light signal. Microphone picks up the signal from a smoke alarm in the magnitude of 70 decibels (frequency range of 600 HZ to 3500 HZ) and activates an electronic component that turns on the light. Only operable during hours of darkness. Since 70 decibels are common to some daytime sounds (vacuum, radio, etc.) a photoelectric cell deactivates the circuit during daytime to avoid undesired operation. Sound sensoring ...[More Information]
    
    
23. MICROLERT 768. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Remote control flashing light signal. Microphone picks up the signal from a smoke alarm in the magnitude of 70 decibels (frequency range of 600 HZ to 3500 HZ) and activates an electronic component that turns on the light. Only operable during hours of darkness. Since 70 decibels are common to some daytime sounds (vacuum, radio, etc.) a photoelectric cell deactivates the circuit during daytime to avoid undesired operation. Sound sensoring ...[More Information]
    
    
24. MIRAC SMOKE ALERT (MODEL 200) --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Mirac Smoke Alert Model 200 is a smoke detector and alarm that provides visual and audio signalling to persons with hearing disabilities. The unit combines an A/C powered DICON smoke detector that emits the standard audio warning in the presence of smoke, and a DIGIMAX strobe light and remote transmitter....[More Information]
    
    
25. PCI REMOTE LAMP MODULE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Remote Lamp Module receives signals from all PCI Monitors and will send a code first to the central receiver and then to the remote lamp modules causing lamps connected to each module to flash in the same pattern shown on the central receiver panel....[More Information]
    
    

Page 1 of 2    Next page »