Products are listed alphabetically.

Page 1 of 1

1. BACK IN PASSENGER POSITION WHEELCHAIR LOCK (MODEL V3B) Wheelchair restraint system to secure wheelchair in moving vehicle. Back-in model secures wheels of chair after it backs into position. Locks automatically when chair is positioned and can be released by occupant. Includes seat belt....[More Information]
   
   
2. C-DOCK The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attach...[More Information]
   
   
3. DRIVE MASTER V12 AUTOMATIC WHEELCHAIR LOCK Wheelchair restraint system provides stationary and stable position for wheelchair during travel. Post of system mounts to floor of vehicle. Restraint bolts to post and hooks to frame of wheelchair. Automatically unlocks at touch of handle. Easy for quadriplegic to use. No electric parts. For driver or front passenger. Can be mounted on Chrysler mini vans at extra charge....[More Information]
   
   
4. ELECTRIC HOLDOWN (MODEL 128) The Electric Holdown, model 128, is wheelchair restraint system that may be installed for the driver or passenger wheelchair position. (Installation depends on the underside of the van.) The holdown consists of two pieces: one piece hooks to the wheelchair frame behind the casters, and the second mounts into the floor of the van. The floor mounted piece clamps onto the piece attached to the chair. The control switch mounts to the vehicle's dashboard or the most convenient position for the operat...[More Information]
   
   
5. EZ LOCK Floor mounted wheelchair restraint system secures wheelchair to floor of van. V.A. accepted. Enables user to sit forward facing or in an angled position in van. Wheelchairs can be rolled into the receiver lock mechanism by backing in or by forward entry. Safety warning signal will sound when vehicle is running while the lock is not fully set. Available with many different "H" bracket configurations to fit most manual and powered wheelchairs on the market. Warranty available....[More Information]
   
   
6. PERMOLOCK C The Permolock C is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C400 or C500 power wheelchairs (see separate entries). The Permolock C consists of a locking plate that is mounted on the floor of the vehicle and a spring-loaded pin attached to the wheelchair base. The wheelchair equipped with the pin approaches the locking base from the rear with pin aligned with a slot in the center of the top of the plate. A control bu...[More Information]
   
   
7. PERMOLOCK C3 The Permolock C3 is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C300, C350, K300 or K450 power wheelchairs (see separate entries). The Permolock C3 consists of a locking plate that is mounted on the floor of the vehicle and two spring-loaded pins attached to the wheelchair base. The wheelchair equipped with the pins approaches the locking base from the rear with pins aligned to two slots in the top of the plate. The pins...[More Information]
   
   
8. Q STRAINT POCKET SYSTEM (MODEL Q-5001) The Q'Straint Pocket System, model Q-5001, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. The belts have bear clamps to adjust length and hooks to attach to frame of wheelchair and to floor pockets located in the floor of the vehicle. Lap and shoulder belts secure the occupant in the wheelchair. The complete system includes two rear belts, two front belts, , one shoulder belt, one lap belt, one shoulder belt bracket assembly, four floor pocket ...[More Information]
   
   
9. Q'STRAINT SYSTEM (MODEL Q-5001-T) The Q'Straint System, model Q-5001-T, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. This model can be mounted on heavy-duty, floor-mounted aluminum L track (available with or without flange; not included), wheelchair tie-down straps, and occupant shoulder and lap belts. The complete system includes two rear belts, two front belts, one lap belt, one shoulder belt, one driver instruction guide, one instruction adhesive label, and one warranty card...[More Information]
   
   
10. QRT RETRACTABLE SECUREMENT SYSTEM SYSTEM (MODELS Q-8100-A1 & Q-8200-A1) The QRT Retactable Securement System is a wheelchair restraint system designed to secure wheelchairs and their occupants in transit and para-transit buses. This system can be mounted on tracks, walls, swing arms, floors, seats, flip seats, or barriers. The system retracts out of sight when not in use and a hard cover protects it from damage. Model Q-8100-A1 is the deluxe system and includes four QRT automatic retractors, an all new adjustable lap/shoulder belt combination, interchangeable self-t...[More Information]
    
    
11. RETRAKTOR Retraktor is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This system features retractable securements that can be mounted to the floor, sidewall, or seat structures. The system includes front tensioning retractors with right and left handles, and occupant restraints that come with a Height Adjuster to accommodate passengers of almost any size. OPTIONS: Various kits are available for Series A and L tracks or plates and bolt-in ap...[More Information]
    
    
12. SCOOTER STATION The Scooter Station is a wheelchair and scooter restraint system designed for use by individuals with mobility disabilities. Designed for use in full-sized vans, mini vans, and the beds of pickup trucks, this electronically-powered system requires no belts and operates with the touch of a button....[More Information]
    
    
13. SECURE-LOK 100 & 200 SERIES Passenger wheelchair tie-down systems. 100 and 200 Series designed to fit manual and powered wheelchairs. Systems include mounting hardware and seatbelt restraints. Can be adjusted to secure three wheeled scooters. The 100 Series has a square bar with long hooks which attach to the rear wheelchair axles. A lap belt is attached to the rear bar. Another square bar is placed across front frame of wheelchair with a strap attached. A scooter tie-down option hooks to the forward steering tiller. Front...[More Information]
    
    
14. SURE-LOK FE500 SERIES SYSTEM The Sure-Lok FE500 Series System is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The system includes over-center buckle and/or cam buckle straps with a minimum breaking strength of 6,000 pounds and 5,000 pounds, respectively. Most kits available in this system have vehicle anchoring hardware that is "positive-locking" to ensure that when the system is properly installed, the strap assemblies cannot be inadvertently released or di...[More Information]
    
    
15. SURE-LOK FF800 SERIES SYSTEMS The Sure-Lok FF800 Series System is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Each securement strap assembly has a minimum breaking strength of 2,500 pounds, and can be attached to virtually any wheelchair aid. OPTIONS: This system is available in a variety of kits designed for Series E, A, or L track fittings. FF865 includes two cam buckle straps, two ratchet buckle straps, and one Series E or A track fitting. FF865S include...[More Information]
    
    
16. SURE-LOK INTEGRATED COMBINATION BELT (MODEL FE200727) The Sure-Lok Integrated Combination Belt, model FE200727, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This system combines a shoulder belt and an integrated lap belt in a fully retractable unit. The unit retracts to the vehicle sidewall; a Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use. The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Ser...[More Information]
    
    
17. SURE-LOK INTEGRATED LAP BELT (MODEL FE200595) The Sure-Lok Integrated Lap Belt, model FE200595, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt is intended for use with the FE500 Series Wheelchair Securement System only (see separate entry). It attaches directly to the rear strap assembly of the wheelchair securement system, and provides an occupant restraint system that is an integrated part of the wheelchair securement. Its restraint capability is dependent upon ...[More Information]
    
    
18. SURE-LOK PARALLEL LAP BELT (MODELS FE200594, FE200600, FE200601, FE200612) The Sure-Lok Parallel Lap Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt attaches directly to the floor track or plates to secure the passenger separately and independently from the wheelchair securement system. The belt's anchoring hardware is positive-locking to ensure that the belt assemblies cannot be inadvertently released or disengaged. A single push-button function allows the release and evacuation of the o...[More Information]
    
    
19. SURE-LOK SHOULDER BELT (MODELS FE200599, FE200604, FE200604L, FE200613, FE200710, FE200710L, FE200716, FE200732) The Sure-Lok Shoulder Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Models FE200599, FE200613, FE200716, and FE200732 are non-retractable shoulder belts that can be attached to a section of track mounted on the vehicle sidewall. Models FE200599 and FE200732 are designed for use with Series L track; models FE200613 and FE200716 are designed for use with Series A track (see separate entries). These models are intended for us...[More Information]
    
    
20. TIE TECH 700 SERIES RESTRAINT SYSTEM The Tie Tech 700 Series Restraint System is a wheelchair restraint system designed to provide secure tie down for people who travel in wheelchairs in vehicles. The system includes tracks that mount securely to the floor of any vehicle. The torso harness straps and lap strap attach independently to the tracks, behind the passenger and then snap together in the front, forming one unit. Wheelchair straps, two on each side to form a four-point system, attach from the wheelchair to the tracks in fron...[More Information]
    
    
21. TRANSIT LOK Transit Lok is a wheelchair restraint system designed for busses and para-transit vehicles. Hooks are attached to the rear wheelchair axles and connected to tie-down hardware. Straps attach to front wheelchair frame and connect to a track mounted on vehicle floor. The rear attachment hardware mounts underneath a jumpseat to preserve seating for an ambulatory passenger. The tie-down system passed a 30 mph crash- test....[More Information]
    
    
22. WHEELCHAIR SEATBELT HOLDOWN (MODEL 126) The Wheelchair Seatbelt Holdown, model 126, is a restraint system designed to keep wheelchair occupants secure when in a vehicle. The extra-long seatbelt straps attach to the floor with angles or Wheelwells (see separate entry), wrap around the armrests and in front of the wheelchair user....[More Information]
    
    

Page 1 of 1