Products are listed alphabetically.

Page 1 of 2    Next page »

1. BRIO ROLLATOR WITH CARRY CASE (MODEL PC1880) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Rollator walker for children aged 2 to 7. Tubular steel with epoxy and chrome finish. Nonswiveling front wheels, adjustable height handlebars, washable canvas toy sack that attaches to front of frame. Folding. Size open is 58 cm long by 41 cm wide by 58 cm high, weight 3 kg. Accessories: push bar handlebar and rubber caps on tips of lower frame to protect floor and for friction. Height adjusts from 48 centimeters to 68 centimeters (19 inc...[More Information]
   
   
2. CHILD INVALID WALKER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Childrens walker with 4 rubber based tips. Height adjusts 27 inches to 31 inches. Useful for children who have some standing weight bearing skills but who require assistance to ambulate. Weight information available from company. Made of tubular aluminum....[More Information]
   
   
3. CHILD WALKER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheeled walking support, 200cm rear wheels with wire spokes. 16cm front casters with rubber bumpers. Wheel locks. Length 83cm. Torso ring support, sling seat, adjustable front support, axilla supports and arm supports available. For children over age 10....[More Information]
   
   
4. CHILD WALKER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Walking support with four small casters. Torso support ring, sling seat and play table or front support bar. Height adjustable. Optional parking brakes. For children age 2 to 10....[More Information]
   
   
5. CHILD WALKER (MODEL 1295) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Four legged wheeled base with 5 inch swivel casters on all legs. Two wheels have step on brakes. Balance ring support with adjustable height saddle seat. Back of ring opens for entry and exit. Frame height adjusts 23 to 31 inches. Base width 21 1/2 by 27 inches. For children 2 to 8 years....[More Information]
   
   
6. CHILD WALKER 7550 --- DISCONTINUED. (Verified 2/93) RETAINED IN DATABASE FOR REFERENCE. --- Wheeled walker for child ages 2 to 8 years. Padded body ring with saddle seat. Seat is adjustable in height and removable if not needed. Back swings open for entry and exit. Adjustable height 23 to 31 inches. Overall length 27 inches, overall width 21 1/2 inches. Inside diameter of body ring 10 inches. 5 inch swivel ball bearing casters. Step on brakes on two casters. Weight 30 pounds....[More Information]
   
   
7. CHILDS PARALLEL WALKER (MODEL PWA) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Childs walker, chrome plated tubular steel frame with welded joints, non-marking rubber tipped legs. Adjustable height 12 to 38 inches in one inch increments, adjustable width from 12 to 20 inches in one inch increments. Lengths 18 or 24 inches....[More Information]
   
   
8. COMPACT FOLDING SAFE T WALKER (MODEL 39-1131) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Folding walker made of extra strong tubular aluminum which folds with release of spring lock with single bail handle. Convenient for storage or travel. Width 23 inches, depth 16 inches, 3 3/4 inches folded. Height 28 inches to 32 inches, 4 rubber tips....[More Information]
   
   
9. DONALD WALKER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Four legged walker. Four rubber tire casters may also be changed for glides when wheeled mobility not required. Balance ring with axillary crutch support. Width between crutches adjusts 8 to 12 inches. Body ring size adjusts 8 to 12 inches. Crutch height adjusts 24 to 34 inches. For children 2 to 6 years....[More Information]
   
   
10. EXPLORER (MODELS 5PWRA & 5CWRA) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- Child training walker provides support while child walks and prevents tumbling to left or right. Consists of four wheel base and torso support. Overall length 31 inches, overall width 25.5 inches. Saddle post height from the floor adjusts from 17 to 29 inches. Upper trunk support height from the floor adjusts from 24 to 35 inches. Available in tiny tot size (5PWRA) with width of upper trunk support 7.25 inches or child'...[More Information]
    
    
11. FIRST STEP --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- First Step is a wheeled walker for toddlers making the transition from creeping to walking. This walker is manufacturer recommended for children aged 10 to 16 months. The walker has a Soft-n-Safe vinyl coated tubular frame, a wide wheel base to aid in the prevention of tipping, and 4 casters. DIMENSIONS: Overall length 21 inches; 15.5 inches to upper rail. WEIGHT: 6 pounds. NOTE: Not recommended for uncarpeted floor....[More Information]
    
    
12. FIRST STEP (MODEL AG0103) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Child training walker. Ergonomically designed to assist child's transition from creeping to walking. 1 inch diameter tubular steel frame. Rear frame is inclined for pull up support. Wide base prevents tipping. Four casters. 15 inches high....[More Information]
    
    
13. GADABOUT --- DISCONTINUED. (Verified 6/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Gadabout is a nonfolding wheeled walker with seat designed for use by children with mobility disabilities. The walker is designed to provide mobility for those who are non-ambulatory by bearing the child's weight while leaving the legs free to propel the walker. FRAME: The tubular frame completely surrounds the child on all sides. The leg height is adjustable to allow the device to grow with the user. The base is 37 ...[More Information]
    
    
14. GAITOR WALKER --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Gaitor Walker is a reverse child's walker designed for use by children from 18 months to 6 years of age with mobility disabilities. This walker has a folding powder-coated tubular steel frame, height- and width-adjustable ritational handles with foam hand grips, on/off anti-reverse wheel stops, swivel front casters with removable caster pin locks, four large tires, a padded rear stabilizer bar, and a rear frame bump...[More Information]
    
    
15. INFANT AND TODDLER WAKLER (MODELS 39-1065 & 39-1066) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Four legged wheeled base with 2 inch swivel caster. Balance ring height adjusts 18 to 24 inches, ring opening 8 1/2 by 10 inches. Toddler size adjusts for children 36 to 54 inches tall, base area 22 by 25 1/2 inches, balance ring height adjusts 24 1/2 to 36 inches, ring opening 9 by 11 inches....[More Information]
    
    
16. INFANT'S LIGHTWEIGHT WALKING AID (MODELS 222 & 222EL) --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Children's walkers. Aluminum frame with molded handles. Fixed height for Infant's Lightweight Walking Aid 22 inches. Adjustable height for Infant's Lightweight Adjustable Walking Aid 22 inches to 25 inches. Overall width 21 1/2 inches. Rubber tips....[More Information]
    
    
17. MINI WALKER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Childs walker made of 1 inch aluminum tubing. Has vinyl hand grips and rubber tips on all 4 legs. Width 17 inches. Depth 14 1/2 inches. Height 20 inches to 25 inches. Weight information available from company....[More Information]
    
    
18. MOON WALKER --- DISCONTINUED. (Verified 9/2003) RETAINED IN DATABASE FOR REFERENCE --- The Moon Walker is an adjustable child wheeled walker designed to be an indoor/ outdoor walker or walker training aid for children with mobility disabilities. For beginning users, the walker features locked front casters and anti-reverse rear wheel locks. As the user becomes more advanced, the front caster locks may be removed for mor maneuverability. For an advanced user, the front caster locks may be removed and the rea...[More Information]
    
    
19. MULTI PURPOSE WALKER (MODELS PC1765S, PC1766S, & PC1763S) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Four legged wheeled walker has swivel casters and a forward handle bar. Rigid balance ring supports child. Height of balance ring adjusts from 29 inches to 32 inches. Walker is 21 inches wide by 34 inches long. Comes with bar to abduct legs; skids on rear casters slow roll. Frame is chrome plated steel. Child size walker (PC1766S) is 19 inches by 30 inches; Infant walker (PC1763S) is for children between 1 1/2 and 4 years old; has adjusta...[More Information]
    
    
20. PRONE SUPPORT WALKER (MODELS PC 1713A, PC 1713B & PC 1713C) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Prone Support Walker is a nonfolding wheeled walker with a seat designed to facilitate semi- to full-upright mobility, positioning, and stability for children with mobility disabilities. This walker features a padded seat and chest support to promote coordination and control of distal body parts as well as development of walking balance and strength. The unit includes indoor and outdoor casters, two with swivels and...[More Information]
    
    
21. PUSH-ALL --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- Push-All is a child walker with a basket for helping toddlers develop walking skills. The basket supports up to 150 pounds. This push-cart has a Soft-n-Safe vinyl coated tubular frame and four casters on a U-shaped wheelbase. This walker is manufacturer recommended for children up to 12 months. DIMENSIONS: Height to handle is 19.5 inches; 13 inches wide. WEIGHT: 9 pounds....[More Information]
    
    
22. RIFTON ADJUSTABLE WALKER (MODEL GE22) ---DISCONTINUED. (VERIFIED 5/96) RETAINED IN DATABASE FOR REFERENCE.--- The Rifton Adjustable Walker, model GE22, is a child's walker designed for indoor use by children 39 to 51 inches tall, with waist height from 20 to 31 inches. It has no floor level bars to impede natural walking action, and features an easy-to-open rear gate to facilitate entry and exit of larger children. The walker has an aluminum frame and expanded vinyl padding and seat to provide strenth and comfort. There are brakes o...[More Information]
    
    
23. RIFTON INFANT WALKER (E21) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Walker designed for an older baby. Constructed of welded aluminum with colorful coating. Inside ring 9 inch diameter, seat is 6 inches high with 2 inch vertical adjustments. Overall width 25 inches, weighs 13 pounds....[More Information]
    
    
24. ROLLATOR JUNIOR (MODEL 39-1102) & ROLLATOR CHILD (MODEL 39-1103) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Childs walker with large front wheels and rubber tipped supports in back. Lightweight and provides forward movement. Height adjusts from 20 inches to 27 1/2 inches. Junior model is 23 1/2 inches wide; childs model is 18 inches wide. Made of tubular aluminum. Weighs 14 pounds....[More Information]
    
    
25. THE SAFE STEPPER SAFETY WALKER --- DISCONTINUED. (Verified 6/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Safety Stepper Safety Walker is an ambulation pattern trainer designed to enable pre-toddlers with mobility disabilities to practice step patterns on a stationary base. The three-legged device is anchored to a large circular base. The child is placed in a removable. washable seat which is completely surrounded on three sides by a tray for stability and support. Two attachable toys are included. The seat and tray rot...[More Information]
    
    

Page 1 of 2    Next page »