Products are listed alphabetically.

Page 1 of 1

1. ADD ON POWER SYSTEM (MODEL 1000FS) --- DISCONTINUED. (Verified 6/96) RETAINED IN DATABASE FOR REFERENCE. --- Add on power system converts manual wheelchairs to power driven wheelchairs. Features high speed mode at 3.5 to 4 miles per hour; low speed mode at 1.5 miles per hour; operation on two 12 volt deep cycling batteries; 24 volt automatic battery charger; control box with high/low speed switch, battery indicator, horn, on/off switch, and power/manual mode; silent proportional controller with adjustable features; 10 mile range ...[More Information]
   
   
2. DAMACO D90 --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Damaco D90 Portable Power System is an add-on power unit for most manual wheelchairs with large rear wheels including ultra-lights, standup chairs, recliners, children's models, and conventional manual chairs. This lightweight attachment is easily attached and removed from the chair. For persons with sufficient upper body strength for transfers, the unit may permits the use of a car rather than a van for transportati...[More Information]
   
   
3. ELECTRO MATIC --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Power unit has joystick control and 2 speeds with maximum speed of 2 miles per hour. Automatic brakes. Motors brake when going down grade or when power is off. Left or right control mounting. Heavy duty 12 volt battery supported by a carrier resting on the frame between rear wheels. Battery carrier is rubber coated and will accommodate up to 7 by 10 3/4 inches. Carrier lifts off to fold chair. Power drive is designed primarily for indoor ...[More Information]
   
   
4. MANUAL MOTION --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Manual Motion is an add-on power unit designed to provide sport manual wheelchair users with speed, power, and exercise with less effort and more comfort by converting the chair into a lever driven chair. The unit consists of two independent levers which, when pushed forward, force a chain around a sprocket attached to the wheel, and rolls the chair forward. The power stroke can be changed from pushing to pulling on the levers. Pullin...[More Information]
   
   
5. PORTABLE ELECTRIC WHEELCHAIR ATTACHMENT (MODEL SM-7368) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Add on power unit to attach to standard manual wheelchair. Two 12 volt batteries attach under seat. Can be disengaged to free wheel as manual wheelchair. Motor is located in tiller arm that is attached over front caster wheel, left or right side. Operates by constant pressure trigger switch. Includes battery, charger, light and warning horn....[More Information]
   
   
6. PORTABLE POWER PAC ---DISCONTINUED. (VERIFIED 3/18/96) RETAINED IN DATABASE FOR REFERENCE.--- Add-on power system to convert a manual wheelchair into a powered chair. Designed to fit all manual wheelchairs. Proportional joystick control attaches to the left or right armrest. 24 volt motors. Automatic braking system. Disassembles to allow wheelchair to fold for transport. Maximum speed, 5 miles per hour. Maximum range, 10 miles. System attaches over the top of the rear wheels. Batteries are mounted in front of cros...[More Information]
   
   
7. POWER ASSISTED WHEELCHAIR --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Power assist to front wheels when an increased load requirement is detected. Mounts to front casters. Chair is propelled manually by handrims until power assist is needed....[More Information]
   
   
8. POWER STRIDER --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- Electric powered frame with footrests and small wheels to attach to standard four leg chair (not wheelchair). Joystick control can be mounted anywhere on chair. One 12 volt battery. Overall weight, 38 pounds. Overall length, 16 to 24 inches, width adjustable, 16 to 24 inches. Legs of chair are placed in attachments on wheels. For indoor use....[More Information]
   
   
9. RIGIDIZING FRAME FOR POWER AND MANUAL WHEELCHAIRS --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Rigidizing frame allows the cross members of the wheelchair to be removed to install equipment such as battery and ventilator drawer, or an independent elevating legrest system....[More Information]
   
   
10. ROLL-AID WHEELCHAIR POWER ADAPTER (MODELS 100S & 200D) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Roll-Aid Wheelchair Power Adapter is an add-on power unit designed to convert 18- or 16-inch wide manual folding wheelchairs to powered wheelchairs. To use the unit, the user rolls the wheelchair onto the adapter, engages the wheelchair brakes, and pushes the revers paddle on the Roll-Aid to lock the unit in place. To return to manual wheelchair use, the user squeezes the release lever and pushes the forward paddle...[More Information]
    
    
11. SELF PROPELLED ROBOTIC WHEELS --- DISCONTINUED. (Verified 7/2011) RETAINED IN DATABASE FOR REFERENCE. --- Abstract in process; contact manufacturer directly for product details....[More Information]
    
    
12. SLEYRIDE CONVERSION UNIT (MODEL 8600) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Conversion unit attaches to a standard manual wheelchair without modification, large drive wheels do not need to be removed. The unit provides powered assistance for driving the wheelchair. T-bar control lever is centrally attached to front of chair and battery tray fits on rear. Steering column controls front center wheel as part of the conversion unit. Chair will travel inclines of one in 8 1/2. Battery charger is filled with a jack plu...[More Information]
    
    
13. SOLO ELECTRIC CONVERSION UNIT (MODELS M3SP & M3SM) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Add on power drive unit to convert manual wheelchair to powered wheelchair. Easily attaches to any wheelchair from adult to 12 inch juniors. Chair remains foldable with removal of battery carrying case. Drive assembly is gear driven with completely sealed four pole, permanent magnet motor and ball bearing box. Box is cast aluminum with sealed steel and cast iron gears. Solid state fully proportional electronics. All packages (battery, ele...[More Information]
    
    
14. SOLO POWER PACK (MODEL 1266) --- DISCONTINUED. (Verified 6/95). RETAINED IN DATABASE FOR REFERENCE, --- The Solo Power Pack, Model 1266 is an add on power unit that can be installed on standard wheelchair frames to provide power assisted propulsion. The battery pack mounts on rear of chair over wheels, it has a 24 volt direct drive with a low battery indicator. The standard operation is by proportional control joystick, but chin control is available. Additional, standard features include an adapter for installation on recli...[More Information]
    
    
15. SUPER WHEEL --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Add on power unit. Single electric wheel converts manual wheelchair into outdoor terrain wheelchair for maneuvering over rough ground. Operates on 12 volt battery. Includes charger. Easily attaches to wheelchair by attendant....[More Information]
    
    
16. THE KIT. --- DISCONTINUED. (VERIFIED 8/95) RETAINED IN DATABASE FOR REFERENCE. --- Add-on power unit for manual wheelchairs. Motors attach to each side of rear frame. Single switch engages motors to provide powered mobility. Proportional joystick control. Batteries remove to allow chair to fold with unit still attached. Maximum range, 4 to 10 miles depending on battery type. Weight without batteries, 11 pounds....[More Information]
    
    

Page 1 of 1