Products are listed alphabetically.

Page 1 of 1

1. 800 SERIES CORNER WALL GRAB BAR FOR TOILET (MODELS 119 & 120) The 800 Series Corner Wall Grab Bar for Toilet ##119/120 is a stainless steel grab bar configured for end or corner stalls. The grab bar consists of a U-shaped bar that goes on the open side of the toilet, and a perpendicular bar that mounts on the wall side of the toilet 5 inches from the opposing wall. These grab bars are avaialble with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Configurations for right (##120) or left (##119) handed mounting. DIMENSIO...[More Information]
   
   
2. 800 SERIES WALL GRAB BAR FOR TOILET (MODEL 012) The 800 Series Wall Grab Bar for Toilet ##012 is a stainless steel wall to floor double bar for toilets. The grab bar consists of two parallel bars that go on either side of the toilet, like a safety frame, with one perpendicular bar situated approximately 5 inches from the wall, when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 24 x 33 inches with 1, 1.25, or 1.5 inch diameter tubing. FI...[More Information]
   
   
3. 800 SERIES WALL GRAB BAR FOR TOILET (MODEL 117) The 800 Series Wall Grab Bar for Toilet ##117 is a stainless steel wall mounted grab bar. The frame consists of 2 U-shaped railings with a perpendicular bar between rails situated 5 inches from the wall when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 24 x 24 x 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip wi...[More Information]
   
   
4. 800 SERIES WALL GRAB BAR FOR TOILET (MODELS 115 & 116) The 800 Series Wall Grab Bar for Toilet ##115/116 is a stainless steel U-shaped grab bar with extension support. These grab bars are available with a concealed or exposed mounting. All styles have a standard safety clearance of 1.5 inches, and are available in Right (##116) or Left (##115) handed configurations. DIMENSIONS: 16 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 6 pounds....[More Information]
   
   
5. BOOMERANG BAR (MODEL 1220) The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B...[More Information]
   
   
6. BRIDGE MEDICAL TELESCOPING PORTABLE GRAB BAR (MODEL BC400M) The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati...[More Information]
   
   
7. BRIDGE-MEDICAL SINGLE GRIP PORTABLE GRAB BAR (MODEL BC-201) The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds....[More Information]
   
   
8. CORNER TOILET BAR (MODELS GS711 & GS712) Stainless steel corner grab bar for toilet. 1, 1 1/4 or 1 1/2 inch diameter, 8 inch wall clearance. Satin finish. Exposed or concealed mount. 33 inches high with 8 inch perpendicular extension support. Right or left....[More Information]
   
   
9. DEPENDA-BAR The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat...[More Information]
   
   
10. DEVON RAIL WITH FOLDING LEG The Devon Rail with Folding Leg is a wall grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. The folding leg provides additional security and lessens strains on the wall. The height of the rail can be adjusted prior to wall mounting. DIMENSIONS: The rail is 30 inches long. The height adjusts ...[More Information]
    
    
11. GRAB BAR FOR TOILET (MODEL 3100 K SERIES TYPE-04) L shaped Grab Bar; wall mounted 24 inches above floor; horizontal bar 16 inches long; vertical bar 32 inches long. 1 1/2 inches wall clearance; peened finish for better grip; available for left hand and right hand....[More Information]
    
    
12. HINGED ARM SUPPORT, SET FOR MOUNTING AT 45 DEGREES, FIXED ARM SUPPORTS (MODELS 2601 & 2603) The Hinged Arm Support, Set for Mounting at 45 Degrees, Fixed Arm Supports, Models 2601 & 2603, are wall grab bars for toilets designed for use by people with physical disabilities. The hinged units have single hand operation, lock in the upright position, and have an aluminum and nylon hinge point. The mounting set has a 45 degree angle for corner toilets. Both models are available in stainless steel. OPTIONS: An optional paper hook is available. DIMENSIONS: Wall mount dimensions are 11 x 4.1 i...[More Information]
    
    
13. HOCKEY STICK BAR (MODEL 832) The Hockey Stick ##832 is a stainless steel wall mounted grab bar that can be used in bathtubs and showers, or next to toilets. The support is shaped in the form of a hockey stick with a longer vertical bar and a shorter horizontal bar that attaches to the wall in two places at the ends. The bar is bent at 97 degrees to create these two sides. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 8 inches with 1, 1.25, or 1.5...[More Information]
    
    
14. INCLINED AID RAIL (MODEL 2245) The Inclined Aid Rail ##2245 is a stainless steel wall mounted grab bar for use in bathtubs and showers, or by toilets. This support is a straight bar that attaches to the wall at both ends. It is available with 4 concealed or 4 exposed mountings, and, when diamond shaped mountings are ordered, is available in right or left hand configurations. When mounted at a 45 degree angle with 22 5/8 inch centerline, this bar is designed to exactly hit building studs 16 inches apart. DIMENSIONS: 22 5/8 inc...[More Information]
    
    
15. LUMEX CHROME GRAB BARS (MODELS 2012A, 2016A, 2018A, 2019A & 2021A) Lumex Chrome Grab Bars, models 2012A, 2016A, 2018A, 2019A and 2021A, are wall mounted grab bars designed for use by individuals with balance or mobility disabilities. Made of durable chrome plated steel with knurling to provide a good gripping surface, the bars can be mounted vertically, horizontally, or diagonally 1.5 inches from the wall. The bars are straight. DIMENSIONS: Length is 12 inches (2012A), 16 inches (2016A), 18 inches (2018A), 24 inches (2019A), or 32 inches (2021A). CAPACITY: 250 ...[More Information]
    
    
16. MULTI-LEVEL HAND GRIP (MODEL F72481) The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248...[More Information]
    
    
17. OFF-THE-POT Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in...[More Information]
    
    
18. P.T. RAIL The P.T. Rail is a wall grab bar for toilet designed for use by individuals with balance, neurological, or mobility disabilities. This P-shaped unit provides rigid support and features dual offset rails to reduce wrist strain when using the lower rail. This rail is available for right or left side mouting in a fixed model or in a hinged model that folds out of the way when not in use. The hinge holds the rail in whatever position it is placed. OPTIONS: Toilet tissue roll holder and floor mast fo...[More Information]
    
    
19. PONTE GIULIO PUR FOLDING RAIL The Ponte Giulio PUR Folding Rail is a wall grab bar for toilet or shower designed for use by individuals with balance, lower extremity, or mobility disabilities. This steel bar folds up against the wall when not in use and has a padded, non-slip surface. The concealed mounting flange is equipped with a multiple hole design for a variety of mounting options. OPTIONS: Hollow wall SNAPTOGGLE mounting kit. DIMENSIONS (LxW): The mounting plate is 9 1/16 x 5 7/8 inches. The overall length is 30 inche...[More Information]
    
    
20. PRESSALIT TOILET SUPPORTS Pressalit Toilet Supports are grab bars designed for providing additional support to individuals using the toilet. They are available in wall-mounted or free standing frame styles, with or without front support legs, and with or without height adjustability. The wall models fold up to the wall. OPTIONS: Front chest supports, back supports, back with side supports, and a toilet paper holder....[More Information]
    
    
21. SWING AWAY GRAB BAR (MODELS B-4993 & 4995) Stainless steel swing away grab bar, for mounting beside toilet. Wall to floor mount, or dual wall mount. Toilet tissue dispenser attached to frame. 1 1/4 inch diameter, satin finish only....[More Information]
    
    
22. WALL GRAB BAR FOR TOILET Stainless steel U shaped grab bar with extension between toilet and corner wall. 1, 1 1/4 or 1 1/2 inch diameter. Exposed or concealed mount. Satin finish. 24 inches long, perpendicular extension 30 inches. Right or left....[More Information]
    
    
23. WAVEGRIP GRAB RAIL SYSTEM Wavegrip Grab Rails are wall grab bars for installation in bathrooms and other areas where additional support is needed for persons with disabilities, children, or seniors. The grab bars are available in straight or bent (45- or 90-degrees) models. The bars feature a continuous "wave" pattern ergonomically designed to fit the contours of the hand. The tubing is made of aluminum and plastics that are permanently bonded to one another and finished with a polyamide surface finish. All parts are eas...[More Information]
    
    
24. WAVEGRIP GRIP PIECES The Wavegrip Grip Pieces are wall grab bars for use in bathrooms around the toilet, in the tub or shower, or in other areas where secure support may be needed for persons with disabilities, seniors, or children. The grip pieces are modular units that may be combined to fit any room, including interior and exterior corners. Different configurations and lengths of handrails may be designed with two models: straight pieces for extension, and open-ended pieces with one wall mount. The tubing feature...[More Information]
    
    
25. WAVEGRIP SUPPORT GRIPS The Wavegrip Support Grips are wall grab bars for use in the bathroom or other areas where support is needed for persons with disabilities or seniors to have a secure hand hold. The U-shaped grips are available in a rigid or folding version. For the swivel mechanism of the folding version, an adjustable brake prevents unwanted folding down of the unit in all positions. The ergonomically designed tubing has a continuous "wave" pattern that fits the contours of the hands. The supports are made of ...[More Information]
    
    

Page 1 of 1