Products are listed alphabetically.

Page 1 of 1

1. 800 SERIES GRAB BAR FOR TOILET (MODEL 054) The 800 Series Grab Bar for Toilet ##054 is a stainless steel wall to floor grab bar for unilateral support when accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to the wall and to the floor with a 3-inch extension at the floor mounting. This bar is available with a concealed or exposed mounting. DIMENSIONS (LxH): 33 x 30 inches with either 1.25 or 1.5 inch diameter tubing (1-inch tubing not available with this bar). WEIGHT: 6 to 7 pounds. FINISH: Stan...[More Information]
   
   
2. 800 SERIES GRAB BAR FOR TOILET (MODELS 010 & 011) The 800 Series Grab Bar for Toilet ##010/011 is a stainless steel wall to floor grab bar for unilateral support while accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to both the wall and the floor, and an outrigger, or extension floor mount. These bars are available with a concealed or exposed mounting, right (##011) or left (##010) handed configuration, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 6 x 33 inches with 1...[More Information]
   
   
3. ARM SUPPORT AID RAIL (MODEL 3033) The Arm Support Aid Rail ##3033 is a stainless steel wall to floor grab bar for use next to a toilet. The support consists of an L-shaped bar with an extension arm that gives added stability to the vertical bar. This grab bar is available in 4 concealed or 4 exposed mountings, and in right or left hand configurations. DIMENSIONS: 30 (L) x 33 (H) inches with 5 (L) x 12 (H) inch extension arm. FINISH: Brushed Satin is standard; optional finishes include non-slip grips, metallic plating, and electr...[More Information]
   
   
4. ARM SUPPORT RAIL Stainless steel grab bar from wall to floor. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 30 by 30 inches....[More Information]
   
   
5. CORNER MOUNTED TUB RAIL (MODEL 3236-C) The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32 ...[More Information]
   
   
6. DEPENDA-BAR The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat...[More Information]
   
   
7. FLOOR MOUNTED TUB RAIL (MODEL 3236) The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch ...[More Information]
   
   
8. GRAB BAR (MODEL 3100 K SERIES TYPE-15) Stainless steel wall to floor Grab Bar; 33 inches high and 30 inches projected out from wall with vertical bar to attach to floor; peened finish for better grip. 1 1/4 inch diameter, 18 gauge....[More Information]
   
   
9. WALL TO FLOOR BAR WITH 3-INCH EXTENSION (MODEL 3303-WX) The Wall to Floor Bar with 3-inch Extension ##3303-WX is a grab bar for use next to a toilet to give support and balance to persons who need it when standing or sitting. This is an L-shaped bar that extends below floor level an additional 3 inches. Manufacturer recommends use with concrete floors only. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 33 (H) x 30 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Satin is standard; optional finish...[More Information]
   
   
10. WALL TO FLOOR GRAB BAR Stainless steel grab bar extends from wall to floor on one side of toilet, with 6 inch extension support at base. Section attached to floor is shaped 6 inches back from front edge. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 26 inches wide, 32 inches high. Right or left....[More Information]
    
    
11. WALL TO FLOOR GRAB BAR Stainless steel grab bar attaches wall to floor, 30 by 33 inches. Floor end mounts in socket inserted in floor. Concealed or exposed mountings. 1 inch, 1 1/4 or 1 1/2 inch diameter. Satin finish, or peened non slip finish....[More Information]
    
    
12. WALL TO FLOOR GRAB BAR Stainless steel floor to wall grab bar for toilet, with extension on wall behind toilet. 1, 1 1/4 or 1 1/2 inch diameter. Exposed or concealed mount. Satin finish. 30 by 30 by 24 inches wide, right or left....[More Information]
    
    
13. WALL TO FLOOR GRAB BAR Stainless steel floor to wall grab bar with sunken floor attachment. 1, 1 1/4 or 1 1/2 inch diameter, exposed or concealed wall mount, satin finish. 30 by 30 inches....[More Information]
    
    
14. WALL TO FLOOR GRAB BAR The Wall to Floor Grab Bar is designed to assist individuals with balance or mobility disabilities by providing support while walking or standing/sitting....[More Information]
    
    
15. WALL TO FLOOR GRAB BAR FOR BATHTUB Stainless steel corner wall to floor grab bar for end of tub. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. Concealed or exposed mount. Satin finish. 34 inches wide, 32 inches high. Right or left....[More Information]
    
    
16. WALL TO FLOOR GRAB BAR WITH OUTRIGGER Stainless steel grab bar, attaches to wall and floor, 30 by 33 inches. 6 inch side extension attaches to floor. Specify right or left. Concealed or exposed mounting. 1 inch, 1 1/4 or 1 1/2 inch diameter. Satin finish or peened non slip finish....[More Information]
    
    

Page 1 of 1