Products are listed alphabetically.

Page 1 of 1

1. AM/FM RADIO WITH TILT SWITCH HEADSET (MODEL 340) The AM/FM Radio with Tilt Switch Headset is switch-adapted radio with a set of head position headphones. The headphones are equipped with an adjustable tilt switch that, when the head is brought into proper position (as determined by the placement of the switch), turns on the radio. POWER: The radio requires two double-A batteries. DIMENSIONS (LxW): The radio body is 4.5 x 2.5 inches....[More Information]
   
   
2. ASL ADJUSTABLE BEAM SWITCH WITH 3 PIN CONNECTOR (MODEL ASL210_3) The ASL Adjustable Beam Switch with 3 Pin Connector, model ASL210_3, is a head position switch designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This switch works in conjunction with driver controls from Adaptive Switch Laboratories, including the ASL 105 head array package (see separate entry), to allow head position to control power wheelchair switch activation. This beam switch has an adjustable range. OPTIONS: Replacement switch mounting...[More Information]
   
   
3. ASL ADJUSTABLE BEAM SWITCH WITH MONO PORT (MODEL ASL210_M) The ASL Adjustable Beam Switch with Mono Port, model ASL210_M, is a head position switch designed for use by individuals with mobility disabilities, spinal cord injury, or severe phsyical disabilities. This sensor switch has an adjustable beam range, and can be used to control a power wheelchair or other devices through head position. For powered wheelchair use it works in conjunction with an ASL proportional driver control. An ASL 804 power source cable (not included)is required to receive powe...[More Information]
   
   
4. DIPSY SWITCH The Dipsy Switch is a motion sensitive switch designed for use by individuals with severe physical disabilities or spinal cord injury. This tilt-sensitive switch can be attached to the head, arm, finger or any appropriate object and can be activated by body movements such as tilting the head forward, tilting the head back, or lifting a finger. It can also be attached to objects such as a rocking chair. The switch is activated by a 30-degree tilt to limit false activation. It can also be adjusted...[More Information]
   
   
5. Double Directional Head Switch. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Head operated switch which turns on if head is held upright and off if the head tilts too far forward or back, to encourage a child to keep her/his head in an upright position. Materials include 2 glass mercury switches, 4 feet of 2 conductor, 22 gauge stranded wire, a subminiature size plug, a strip of cardboard, soldering iron, and hot melt glue with applicator gun. Describes and diagrams construction of the switch. The switch may be attatched to...[More Information]
   
   
6. ELECTRICAL SWITCHES ---DO IT YOURSELF" ENTRY --- PURPOSE: Switches for use by individuals with mobility or neurological disabilities. Mel Nowland, a retired engineer, has designed many types of electrical switches for people with limited mobility, using easily found materials such as soap dishes and Tupperware, including eye-blink, two-handed, voice-operated, and pillow switches. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11...[More Information]
   
   
7. HEAD CONTROL SWITCH The Head Control Switch is a head position switch designed for use by children and adults with disabilities. The switch is activated by being tilted and can be mounted on the head or another body part....[More Information]
   
   
8. HEADSWITCH (MODEL 705) The Head Switch is a touch switch that can activated with various body parts for individuals with physical disabilities. The switch requires very little pressure and so can be used by the head, knee, elbow, cheek, etc. Contact manufacturer for information on switch mounting kits (not included). DIMENSIONS: The length is 3.75 inches....[More Information]
   
   
9. HEADSWITCH (MODEL L1101 ) The Headswitch, model, L1101, is a head position switch designed for use by wheelchair users. The headswitch is activated by very little pressure from the head, but can also be activated by various other body parts. The switch attaches to many switch mounting systems. DIMENSIONS: The plug is 1/8 inches in diameter....[More Information]
   
   
10. MOUNTING SWITCH The Mounting Switch is a touch switch designed for use by individuals with severe physical disabilities, spinal cord injuries, or upper extremity disabilities. This switch may be mounted in a variety of locations (though used primarily at the head level) and shaped for optimal positioning. The activation pressure of the switch is adjustable from one to three ounces and an audible click is emitted when the switch closes. DIMENSIONS: 6.5 inches long. WEIGHT: 3 ounces....[More Information]
    
    
11. RIGHTING DEVICE FOR JUVENILE. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to provide feedback for person having difficulty keeping head upright. A mercury switch is attached to the user's head in the desired "on" position. The switch is attached to a control box. Any 110 volt appliance such as a radio is plugged into the control box and the device turns off when the head moves from the desired position and the switch is no longer in the on position. SKILLS REQUIRED: Electronics. AUTHOR: TITLE: Cerebral Palsy Resea...[More Information]
    
    
12. Righting Device for Juvenile. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device encourages a child with cerebral palsy to hold head upright by turning on a television set or radio when the head is in the desired position, and turning it off when the head tilts forward. Control box with an electrical outlet switchable by a mercury contact switch is attached to a child's head so that holding the head upright or tilting it forward turns a radio or television on or off. Includes photograph. COMMENTS: For further information...[More Information]
    
    

Page 1 of 1