Products are listed alphabetically.

Page 1 of 2    Next page »

1. ADAPTA FOAM. Closed cell foam available in sheets or cylinders for fabricating seating and positioning devices. Sheets come in 1 and 2 inch thicknesses in extra firm, firm, and medium densities. Soft density is available only in 1/4 inch thickness. Sheet sizes are 24 inches by 16, 48, or 96 inches. Starter kit includes samples of each thickness and density. Cylinders are 108 inches long in 2, 4, or 6 inch diameters, all in medium density foam. Foam can be cut with razor knife, electric knife, bandsaw, and bo...[More Information]
   
   
2. ALICOVER AliCover is a foam material designed for use as a covering for orthoses. The cover is made of AliPlast 4E (see separate entry), a closed-cell polyethylene foam. The AliPlast 4E is laminated to a durable blue knit nylon, and the cover is applied with 3M Spray 90 or another adhesive spray to attach to the splint or support. AliCover is also available with an adhesive backing. DIMENSIONS: AliCover measures 1/16 x 29 x 8 feet ($33, no. 4437) or 1/16 x 29 x 50 feet ($120, no. 4438). AliCover Self-Sti...[More Information]
   
   
3. ALIMED SUPER CONSTRUCTA FOAM Alimed Super Constructa Foam is tough, lightweight, flexible but firm mini-cell polyethylene foam material designed for customized positioning, seating, and support systems. This waterproof foam can be used without covering or finishing, or vinyl-dipped if a tough skin is desired. The material withstands repeated compression and abuse and returns to its original shape. It can bear heavy weights for extended time periods. The foam is sold by the slab. DIMENSIONS: 1 x 24 x 48 inches (##4925), 2 x ...[More Information]
   
   
4. ALIPLAST AliPlast is a cross-linked, closed-cell, heat modable, polyethylene foam material used for a variety of orthotic applications. There are five types of AliPlast that vary in firmness and stiffness. ALIPLAST 4E: For padding and cushioning splints and casts. Tensile strength of 80 to 110; density of 4 pounds per cubic foot; compressive strength at 50 percent compression is 35 to 45. ALIPLAST 6A: Effective for foot orthotics and many types of hand splints. Tensile strength of 110 to 140; density of ...[More Information]
   
   
5. CHECKERBOARD Checkerboard is foam material made of high density foam cut to a checker board pattern for pressure relief. Sold in sheets....[More Information]
   
   
6. CONSTRUCTA FOAM Constructa Foam is lightweight, rigid, closed-cell polyethylene based foam material designed to be simultaneously firm, supportive, and resilient. Suggested uses are customized positioning, seating, and support systems. The foam is generally covered because its surface is somewhat abrasive to the touch. DENSITY: Medium is 2, Firm is 6, X-Firm is 9, and Super Constructa is 2 pounds per cubic foot. DIMENSIONS: Constructa Foam is available in cylinders (2, 4, or 6-inch diameter x 36 inches) and sla...[More Information]
   
   
7. ETHAFOAM Ethafoam is a polyethylene foam used in the underlayment of contour in seating. Foam sheets are sold 3 per case. DIMENSIONS: 2 x 24 x 3 feet....[More Information]
   
   
8. HIGH DENSITY FOAM (MODEL 180) High Density Foam, no. 180, is a firm, open-cell, ester-type polyurethane foam material designed for cushions needing pressure relieving cutouts. DIMENSIONS: 1 x 16 x 18 inches....[More Information]
   
   
9. NEOPRENE Neoprene is a Lycra covered foam material that is waterproof and washable. DIMENSIONS: 1/8 x 44 x 120 inches ($120) or 1/8 x 42 x 45 ($85). COLORS: Silver and Dark Red....[More Information]
   
   
10. OPEN-CELL CARVE-IT FOAM Open-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This firm-density, fire-retardant foam can be cut with an electric knife and can be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 5 x 16 x 16 inches, 7 x 23 x 23 inches, or 14 x 23 x 23 inches....[More Information]
    
    
11. PLASTAZOTE FOAM MATERIAL Plastazote Foam Material is splinting material and foam padding designed for use with individuals with arthritis or other upper or lower extremity disabilities. This material is heat-activated by heating in a 285-degree oven, after which it can be formed into soft, lightweight splints, cervical collars, or shoe inserts. The material can also be laminated by placing one piece on top of another and heating. This material is available in sheets or in rolls with self-adhesive backing. DIMENSIONS: T...[More Information]
    
    
12. POLYETHELENE FOAM Polyethelene Foam is foam material designed for use in prosthetic and orthotic applications. Available in soft, firm, and medium densities, this cross linked perforated foam can be thermowelded to polyethylene or to itself or be cemented with plastic polyadhesive cement. DIMENSIONS: 36 x 60 x 1/8 or .25 inches thick. COLOR: White....[More Information]
    
    
13. POSITIONER FOAM Positioner Foam is an open-cell polyurethane ester foam material with a density of 2 pounds per cubic foot designed to be easily cut with a sharp knife to make shapes for x-ray or seating positioning. This fire-retardant material circulates air and absorbs liquids. When used uncovered as a positioner, it resists slipping on the surface. This foam can be upholstered for applications where its ability to absorb liquids is undesirable. DIMENSIONS: 27 x 72 inches with thicknesses of 1 to 6 inches in...[More Information]
    
    
14. PPT FOAM PADDING PPT Foam Pading is foam material designed to provide cushioning in splints and to cushion hypersensitive areas. Available with or without self-adhesive backing, the open-cell foam has a top layer of washable nylon skin that is smooth and comfortable to the touch. DIMENSIONS: 1/8 x 12 x 60 inches....[More Information]
    
    
15. QUICKSTICK PADDING Quickstick Padding is adhesive-backed foam padding designed for use in splints or to protect bony prominences for individuals with upper or lower extremity disabilities or who are at risk for pressure sores. This closed-cell, heat moldable, sef-adhesive padding is firm and resists bottoming out. In addition to protecting bony prominrncrs and lining splints, this padding ban also be used to build up handles on activities of daily living equipment. DIMENSIONS (LxWxT): 25 feet x 5.75 inches x 3/16 ...[More Information]
    
    
16. ROLYAN TEMPER FOAM (MODELS A4881 TO A4883) The Rolyan Temper Foam, models A488-1 to A488-3, is open-cell foam material designed for use with splints. This durable, soft slow-recovery foam is aided in molding by body heat. Models A488-1 and A4882 are medium density and model A488-3 is soft density. Model A 488-2 is a plain-backed sheet and the other models have self-adhesive backing. DIMENSIONS: The self-adhesive sheets are 3/8 x 16 x 24 inches. The plain-backed sheet is 1 x 16 x 24 inches. COLOR: Models A488-1 and A488-2 are blue and mod...[More Information]
    
    
17. ROLYAN FOAM PADDING (MODEL A7931) The Rolyan Foam Padding, model A7931, is foam material designed for use with splints. This open-cell foam comes in sheets with self-adhesive backing. DIMENSIONS (TxWxL): 0.5 x 12 x 12 inches. COLOR: White....[More Information]
    
    
18. ROLYAN KUSHIONFLEX PADDING (MODELS A4551, A455002, & A455003) Rolyan Kushionflex Padding is firm closed-cell foam material designed for use with splints. This washable foam cuts easily, resists bottoming out, and can be applied to splints prior to immersion in water. Models A455-1 and A455-002 have an adhesive backing and model A455-003 has a non-adhesive backing. DIMENSIONS: Model A455-1 is 1/8 x 17.75 x 24 inches and models A455-002 and A455-003 are 0.5 x 17.75 x 24 inches....[More Information]
    
    
19. ROLYAN LOW TACK POLYCUSHION PADDING (MODELS A2913 & A2914) Low Tack Polycushion Padding, models A291-3 & A291-4, is foam material designed for splints that require padding changes. This closed-cell foam is designed to peel off after application without leaving a sticky residue. DIMENSIONS: Model A291-3 is 1/8 x 17.75 x 24 and model A291-4 is 0.25 x 17.75 x 24 inches....[More Information]
    
    
20. ROLYAN POLYCUSHION PADDING (MODELS A2911 & A2912) Polycushion Padding, models A2911 & A2912, is foam material designed for padding thermoplastic splints or for general padding designed for use by individuals who are hypersensitive to heat or pressure. The washable, self-adhesive closed-cell foam material can be cut with scissors and can be applied to splints prior to immersion in water. DIMENSIONS: Model A291-1 is 1/8 x 17.75 x 24 inches and model A291-2 is 0.25 x 17.75 x 24 inches....[More Information]
    
    
21. SAMMONS PRESTON CLOSED-CELL CARVE-IT FOAM (A50763) The Sammons Preston Closed-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This foamm can be cut with an electric knife to be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 24 x 36 x 2 inches....[More Information]
    
    
22. SORBOTHANE. Polyurethane energy absorbing elastomer. Safe for prolonged skin contact. Sold in sheets but company will manufacture it in variety of shapes and sizes. Standard size: 12 by 12 inches or 24 by 24 inches, thickness available from 1/10 to 1 1/2 inches. Also sold in various insole products and in various sizes....[More Information]
    
    
23. SUNMATE ORTHOPEDIC FOAM SunMate Orthopedic Foam is foam material of high density open cell elastomeric foam of 5 pound/cubic foot density, with high impact absorption qualities. This foam contours slowly to give uniform pressure distribution and soft springback and is available in extra soft, soft, medium soft, medium, medium firm, firm, and hard densities. DIMENSIONS: Sold in sheets of 16 x 37 inches, 32 x 37 inches, or 37 x 82 inches in a choice of .25, .5, .75, 1, 2, 3, or 4 inches thick....[More Information]
    
    
24. T-FOAM T-Foam is a foam material designed to eliminate pressure points and absorb shock and vibration. This material is used to make flotations pads, mattresses, cushions, and padding (see separate entries). T-Foam flows to give fluid-like fit and support under body presure and heat so that pressure is evenly distributed. This material becomes firmer when subject to sudden impact and absorbs up to 90 percent of sudden impacts and vibration. When released after conforming to an impression, T-Foam return...[More Information]
    
    
25. TEMPER FOAM SHEETS Temper Foam Sheets are foam material designed for a variety of othotic, prosthetic, and rehabilitative applications. This lightweight foam flows under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.It also softens under pressure, temperature increase, and/or humidity and transfers moisture away from the body. Highly resilient, the foam slowly returns to its original form after compression, thus reducing back pressure. The foam available in soft, medium,...[More Information]
    
    

Page 1 of 2    Next page »