Products are listed alphabetically.

Page 1 of 2    Next page »

1. 3-HOLE OFFSET BOARD (MODEL 31652) The 3-Hole Offset Board, Model 31652, is a transfer board designed for use by people who use wheelchairs. Made of 7-ply Finnish birch plywood with a lacquer finish, the board features 3 hand holes set at an angle to assist the in gripping as the user moves across the board. DIMENSIONS (LxW): 24 x 11.5 inches. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase....[More Information]
   
   
2. ABLEWARE REVERSIBLE TOILET TRANSFER SEAT (RTTS) The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan...[More Information]
   
   
3. ANTI-SLIP TRANSFER BOARD WITH NO HAND HOLES The Anti-Slip Transfer Board with No Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEIGHT: 2.5 p...[More Information]
   
   
4. ANTI-SLIP TRANSFER BOARD WITH TWO HORIZONTAL HAND HOLES The Anti-Slip Transfer Board with Two Horizontal Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24, or 29 x 8 inches. ...[More Information]
   
   
5. ANTI-SLIP TRANSFER BOARD WITH TWO VERTICAL HAND HOLES The Anti-Slip Transfer Board with Two Vertical Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEI...[More Information]
   
   
6. BEASYGLYDER 32 The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and ...[More Information]
   
   
7. BEASYTRANS EASY TRANSFER SYSTEM (ETS) & BEASY II EASY TRANSFER SYSTEM (ETS) The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin. ...[More Information]
   
   
8. CANADIAN PADDED TRANSFER BOARD ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded transfer board with a plinth which fits into the forward arm rest socket of a standard wheelchair. Transfer board made of 15 by 6 1/2 inch plywood, a base plate of iron or steel, an iron water pipe, a sheet (10 by 6 inches) of firm leather or plastic, foam padding and a slippery fabric cover. The board is used in place of either arm of the wheelchair. Includes instructions and diagrams. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Wig...[More Information]
   
   
9. CURVED TRANSFER BOARD The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle...[More Information]
   
   
10. DELUXE TRANSFER BOARD (MODELS NC94205 & NC94205-B) The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942...[More Information]
    
    
11. DELUXE WOOD TRANSFER BOARD The Deluxe Wood Transfer Board is designed for use in transfers to and from wheelchairs. This solid hardwood board has tapered ends and is urethane coated, sealed, and polished for smoothness. The board has a cut-out handle for gripping and carrying. DIMENSIONS (LxW): 30 x 8 inches. CAPACITY: 250 pounds....[More Information]
    
    
12. EASYGLIDE (MODELS 5020, 5050, 5060, & 5070) The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model...[More Information]
    
    
13. ECONOGLIDE TRANSFER BOARDS The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40...[More Information]
    
    
14. ECONOSLIDE SERIES TRANSFER BOARDS Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model...[More Information]
    
    
15. ESSENTIAL HARDWOOD TRANSFER BOARD (MODEL P2300) The Essential Hardwood Transfer Board, model P2300, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This hardwood board is sealed and highly polished for ease in sliding and features a tapered end and one hand cut-out. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 250 pounds....[More Information]
    
    
16. ESSENTIAL PLASTIC TRANSFER BOARD (MODEL P2301) The Essential Plastic Transfer Board, model P2301, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This high-impact plastic board has a smooth surface for ease in sliding and features a tapered end. DIMENSIONS (WxL): 8 x 27.5 inches. CAPACITY: 250 pounds....[More Information]
    
    
17. HI D TRANSFER BOARD (MODEL BK6111) The Hi D Transfer Board, model BK611, is a transfer board designed for use by individuals with mobility disabilities. Made of polyethylene plastic, this transfer board features a smooth easy slide surface with round corners and centered hand slot. DIMENSIONS (LxWxD): 26 x 10 x .5 inches. WEIGHT: 6 pounds....[More Information]
    
    
18. INCLINED BOARD -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation for individuals with mobility disabilities to use when they fall and have no way getting back up to the raised position. The Inclined Board constructed from a ¾ inch piece of plywood, 22 inches tall by 48 inches long. The board has notches on both sides for the individual to hold and grab on to. At the top of the Inclined Board there are two holes by which a piece of rope can be inserted and knotted securely in pla...[More Information]
    
    
19. LIFESTYLE TRANSFER BOARD (MODELS RTL6044 & RTL6045) The Lifestyle Transfer Board, models RTL6044 and RTL6045, is a transfer board designed for use by individuals with balance, lower extremity or mobility disabilities or spinal cord injury. Intended for use in transfers to and from wheelchairs, this board features two horizontal cut-out handles for gripping and carrying. It has rounded corners with tapered ends. The board is made of Baltic birch with a clear lacquer finish. DIMENSIONS: Available in lengths of 24 and 30 inches. CAPACITY: 250 pounds...[More Information]
    
    
20. LIGHTWEIGHT PLASTIC TRANSFER BOARD The Lightweight Plastic Transfer Board is designed to aid individuals who use wheelchairs in transferring to and from the wheelchair. Molded of high-impact plastic with reinforcement ribs for maximum stength, this board provides a rigid transfer surface between any two level surfaces. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 220 pounds....[More Information]
    
    
21. LITE TRANSFER BOARD (MODEL BK6466) The Lite Transfer Board, model 6466, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. Made of birch plywood with a lacquer finish, this board has tapered ends and rounded edges for easy sliding. DIMENSIONS (LxWxD): 24 x 8 x .05 inches. WEIGHT: 37 ounces....[More Information]
    
    
22. MJM TRANSFER BOARD (MODEL 600) The MJM Transfer Board, model 600, is a transfer board designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. The board is made of high density polyethylene, and has eight carrying handles and three web nylon restraint straps with side release plastic buckles. DIMENSIONS (LxW): 71 x 23.5 inches. The restraint straps are 2 inches....[More Information]
    
    
23. MODRAIL The ModRail is a bed transfer aid designed for use by individuals with balance or mobility disabilities. The unit includes a fixed dual rail and a horizontal bar (ModBar) that can be repositioned to an optimal support location. Lift to unlock, hold up to rotate freely, and lower any time to lock. The ModBar pivots and locks every 45 degrees and moves in step with the user. The ModRail assembly secures to ModRail Bracket via a securing knurled knob. ModRail is removable in seconds in case of emer...[More Information]
    
    
24. MOLDED TRANSFER BOARD (MODEL 6032) The Molded Transfer Board, model 6032, is a high-impact, heavy duty plastic board with tapered ends designed to assist individuals with mobility disabilities with transfers. The board is 8.25 x 24.25 inches....[More Information]
    
    
25. OFFSET SLIDING BOARD (MODEL 6115) The Offset Sliding Board, model 6115, is a lightweight birch transfer board designed to fit around the wheel of a wheelchair when the armrest is removed. A hand slot is cut into the board. DIMENSIONS (LxWxH): 28 x 11.75 x 3/8 inches. CAPACITY: 300 pounds....[More Information]
    
    

Page 1 of 2    Next page »