Products are listed alphabetically.

Page 1 of 1

1. BASE MATE MODULAR ADAPTIVE SEATING SYSTEM Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks....[More Information]
   
   
2. CARRIE ROVER STROLLER (MODELS 4642, 4643. 4644, & 4645) The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be u...[More Information]
   
   
3. CLASSROOM/TRANSPORT MOBILITY BASE The Classroom/Transport Mobility Base is a wheeled base for the Snug Seat 1 seating system (see separate entry). This trolley-style base is designed to place the child at preschool table height of about 18 inches to aid in peer interaction, communication, and feeding activities. Standard features include a polyester powder coat finish, safety lock, rear caster locks, and 4 swivel casters. DIMENSIONS (HxLxW): 5 x 18 x 15.5 inches. WEIGHT: 9 pounds. COLOR: Antique gray....[More Information]
   
   
4. GROWTH GUIDANCE SYSTEMS (GGS) Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt....[More Information]
   
   
5. KIDSTER CHAIR The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s...[More Information]
   
   
6. MPS - MOBILE POSITIONING SYSTEM The Mobile Positioning System - MPS (models 30-1100 and 30-1101) is a modular seating system on a wheeled base. The system consists of wedges, rolls, abductors, adductors, blocks, log, straps, and mobile base. Components are made of foam covered with a urine proof, stain and odor resistant, non-toxic material that is cleanable with a damp cloth. SIZES: MPS Child, 48 x 27 inches, and MPS Adolescent, 56 x 27 inches....[More Information]
   
   
7. PANDA FUTURA, THE The Panda Futura is a seating system on a wheeled base designed for use by children from one to twelve years of age with mobility disabilities. This unit accommodates children with needs that change throughout a single day and is availavble with a choice of five mobility bases, including manual or power high-low frames that enable the child to interact from floor-level to the kitchen table. The contoured, padded, fabric-covered seat is available in a variety of sizes and the back of the seat ad...[More Information]
   
   
8. PANDA SEATING SYSTEM BY R82 The Panda Seating System by R82 is a seating system on a wheeled base for children and adults. FRAME: Indoor frame with gas spring has a 4 caster base; dimensions are 67 x 48 centimeters (cm), with seat height adjustable from 40 to 52 cm, or 46 to 58 cm. Hydraulic indoor frame with 4 caster base has the dimensions 67 x 48 cm, and seat height adjustable from 48 to 63 cm. Outdoor frame is 64 x 62 (standard width) or 52 cm (narrow) with seat height adjustable from 45 to 53 cm and dual bicycle type ...[More Information]
   
   
9. SUPPORT CHAIR ADAPTATION OF THE KOALA CORNER CHAIR --- CUSTOM ADAPTATION --- PURPOSE: To provide a customized, stable seating and positioning device for a child with cerebral palsy. This device was adapted from a previous adaptation “The Koala.” The Koala is a pedestal seat with a winged back, and is generally used with a seat cushion and pelvic belt. It comes with a large adjustable-height table, which has lipped edges to stop objects from falling off, and latches into position behind the back edges of the seat. The version used by the child wi...[More Information]
   
   
10. ZIPPIE The Zippie is a child's lightweight manual wheelchair designed for use by children with mobility disabilities. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional.A growth kit is included to expand the fame to meet the user's needs. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths ran...[More Information]
    
    
11. ZIPPIE TS The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel ...[More Information]
    
    

Page 1 of 1