Products are listed alphabetically.

Page 1 of 2    Next page »

1. AEVIT L SERIES GAS AND BRAKE CONTROL The AEVIT L Series Gas and Brake Control is a driving control system designed for use by individuals with lower extremity disabilities. This stand-alone accelerator and brake control system utilizes a lever input device with an adjustable maximum required input force ranging from 2.4 to 5.0 pounds. The input device can be positioned for either left hand or right hand operation, and the Gas/Brake input direction is user-selectable....[More Information]
   
   
2. AEVIT YJ SERIES GAS AND BRAKE CONTROL The AEVIT YJ Series Gas and Brake Control is a driving control system designed for use by individuals with lower extremity disabilities. This stand-alone accelerator and brake control utilizes a single axis joystick input device that requires a maximum input force of 0.2 pounds. The joystick input device is constrained to move only in the Y-axis and is internally spring-loaded to return to the center, or null, position. The input device can be positioned for either left hand or right hand operat...[More Information]
   
   
3. CLASSIC HAND CONTROL BY VEIGEL (MODEL 4100CL) The Classic Hand Control by Veigel, model 4100CL, is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed for right-handed use, the device attaches to the steering wheel. To accelerate, the driver turns the ergonomic handle clockwise. To brake, the driver pushes the unit slightly forward. The brake can be locked while waiting in traffic. The ergonomic handle can be adjusted to accommodate individual driver needs. The unit ca...[More Information]
   
   
4. CLASSIC HAND CONTROL FOAM GRIP OFFSET (MODEL 3500FX) The Classic Hand Control Foam Grip Offset, model 3500FX, is a hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this handle and grip are designed to be two inches longer than most standard hand controls. The offset handle is fully adjustable 360 degrees to provide additional knee clearance for taller users while permitting full accelerati...[More Information]
   
   
5. CLASSIC HAND CONTROL FOAM GRIP OFFSET HANDLE (MODEL 3501FBX) The Classic Hand Control Foam Grip Offset, model 3501FBX, is a hand control designed to allow individuals with lower extremity disabilities or spinal cord injury to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this handle and grip are designed to be two inches longer than most standard hand controls. The offset handle is fully adjustable 360 degrees to provide additional knee clearance for taller users while per...[More Information]
   
   
6. CLASSIC HAND CONTROL FOAM GRIP STRAIGHT (MODEL 3500F) The Classic Hand Control Foam Grip Straight, model 3500F, is a driving hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with their hands. The grip and handle are designed to be two inches longer than most standard hand controls to provide more comfortable driving control and added leverage when braking and accelerating. ...[More Information]
   
   
7. CLASSIC HAND CONTROL FOAM GRIP STRAIGHT HANDLE (MODEL 3501FB) The Classic Hand Control Foam Grip Straight Handle, model 3501FB, is a driving hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with their hands. The grip and handle are designed to be two inches longer than most standard hand controls to provide more comfortable driving control and added leverage when braking and accelerating....[More Information]
   
   
8. CLASSIC HAND CONTROL KNOB GRIP OFFSET (MODEL 3500KX) The Classic Hand Control Knob Grip Offset, model 3500KX, is a driving hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this unit comes with a standard bent brake rod that allows the control to be mounted higher in the vehicle for ease in driving.The offset handle is fully adjustable 360 degrees to provide additional knee clearance for ta...[More Information]
   
   
9. CLASSIC HAND CONTROL KNOB GRIP OFFSET HANDLE (MODEL 3501KBX) The Hand Control Knob Grip Offset Handle, model 3501KBX, is hand control designed to allow individuals with lower extremity disabilities or spinal cord injury to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this handle and grip are designed to be two inches longer than most standard hand controls. This offset handle is fully adjustable 360 degrees to provide additional knee clearance for taller users while permi...[More Information]
   
   
10. CLASSIC HAND CONTROL KNOB GRIP STRAIGHT (MODEL 3500K) The Classic Hand Control Knob Grip Straight, model 3500K, is a hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with one hand. Designed to ensure comfort and added leverage when braking and accelerating, this unit comes with a standard bent brake rod that allows the control to be mounted higher in the vehicle for ease in driving. A center pivot of our controls allows the grip to be pivoted away from the door for ...[More Information]
    
    
11. CLASSIC HAND CONTROL KNOB GRIP STRAIGHT HANDLE (MODEL 3501KB) The Classic Hand Control Knob Grip Straight Handle, model 3501KB, is a hand control designed to allow individuals with lower extremity disabilities or spinal cord injury to operate the accelerator and brake of a motor vehicle with one hand. Designed for comfort and added leverage when braking and accelerating, this unit comes with a standard bent brake and rod that allows the control to be mounted higher in the vehicle. A center pivot of controls allows the grip to be pivoted away from the door ...[More Information]
    
    
12. COMPACT HAND CONTROL BY VEIGEL (MODEL 4200CP) The Compact Hand Control by Veigel, model 4200CP, is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. To accelerate, the driver pulls the ergonomically-shaped handle backwards and a slight push forward operates the brake. The brake can be locked at the push of a button while waiting in traffic. The movements are transferred by sturdy push rods. The special transmission gives increased sensitivity at low revolutions per minute (RP...[More Information]
    
    
13. DADC 500 MANUAL PUSH PULL The DADC 500 Manual Push Pull is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper extremity disabilities, including limited range of motion. It is designed for drivers who like the traditional push/pull handle. The user pulls the handle to control the accelerator and pushes it to apply the brakes. The DADC 500 Manual Push Pull features quick, light action and smooth response to the user's motions. It fits a wide range of vehicles with little...[More Information]
    
    
14. DADC 500 MANUAL PUSH ROCK The DADC 500 Manual Push Rock is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper or lower extremity disabilities, including limited range of motion. Designed for drivers who want a higher hand position on the steering wheel, the DADC 500 Manual Push Rock features a vertical handle and provides a quick, light action and smooth response to the user's motions. The user pulls (or rocks) the vertical handle back to control the accelerator and pu...[More Information]
    
    
15. DADC 500 PUSH PULL HAND CONTROL The DADC 500 Push Pull is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper extremity disabilities, including limited range of motion or hand strength. The user pulls the handle to control the accelerator and pushes it to apply the brakes. Designed for drivers who like the traditional push/pull handle, the DADC 500 Push Pull is vacuum assisted and requires only a light touch to operate. The full range of motion from idle to full throttle is l...[More Information]
    
    
16. DADC 500 TWIST The DADC 500 Twist is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury, including people with limited range of motion. This power assisted hand control has a handle that is twisted gently for gas and a lever that is pushed for brakes. The DADC 500 Twist is intended for drivers who want ease of operation and precise, fingertip control. Its vacuum-assisted, motorcycle-style handle enables full throttle in one quarter turn of the wri...[More Information]
    
    
17. DADC BRAKE ONLY The DADC Brake Only is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, upper or lower extremity disabilities, including limited range of motion or use of only one leg, or drivers who can operate the pedals, but are challenged with the transition from gas to brake. The user pushes the control's handle to apply the brakes. It does not connect to the accelerator. The DADC 500 Brake Only provides a quick, light action and a smooth response. It fits a wi...[More Information]
    
    
18. DRIVE MASTER D1XL AUTO HAND CONTROL Hand control, push toward floor to brake and pull parallel to steering column for acceleration. Attaches to either side of steering column. Recommended for use in vehicle with power steering and power brakes. Stainless steel and aircraft aluminum parts are rustfree. Nonglare surface finish. Hand control does not interfere with operation of vehicle by able bodied person. Tilt type and telescoping steering wheels do not interfere with proper use of hand control. Easy to install. Instruction and di...[More Information]
    
    
19. DRIVE MASTER D9XL AUTO HAND CONTROL FOR BRAKE ONLY Hand control for brake. Push mechanism operates unit. Suitable for use with brake pedal for persons with enough strength in right leg to operate accelerator....[More Information]
    
    
20. DRIVE MASTER HAND CONTROL (MODEL V8) Hand control, aluminum and stainless steel construction. Control attached to steering column, brake and accelerator pedals. Fits American and imported vehicles. Control level extends under steering column and upward to about the level of factory installed directional signal. Bolt attachment to gas pedal and accelerator. Pull to accelerate; push for brake. 30 day guarantee of full refund. Easy to install; no parts go under the hood of the vehicle. Shipped with instructions and diagrams. Will not ...[More Information]
    
    
21. HAND CONTROL (MODEL 3501) The Hand Control, model 3501, is designed for persons without the use of their left leg to operate the brake pedal and clutch of cars with manual transmission. This lightweight brushed aluminum alloy hand control clamps to the lower part of the steering column and to the pedals. It mounts on the left or right side of the steering column, but will not interfere with the normal operation of the vehicle. A horn and dimmer switch is also located on the handle. To operate, the user pushes the handle ...[More Information]
    
    
22. MINI-TOUCH VEHICLE CONTROL PAD The Mini-Touch Vehicle Control Pad is a hand-operated driving control system designed for use by individuals with lower extremity disabilities or spinal cord injury. This steering wheel mounted control pad enables hand control of vehicle functions such as wipers, turn signals, horn, and high/low beams. The standard unit has 6 functions. Original controls remain fully functional. The control is transferable to most makes and models of vehicle, and can be configured for foot-control use. OPTIONS: ...[More Information]
    
    
23. MONARCH MARK IA The Monarch Mark IA is a hand control made of steel, stainless steel, and aluminum. The device is operated by pushing a handle parallel to the steering column for brake and at right angle towards the driver's lap for acceleration. The control also has toggle switches for light dimmer and horn. The hand control will not interfere with operation of the vehicle by an able-bodied driver. The control can be positioned for left or right hand operation. INSTALLATION: The device has a V-block mount and ...[More Information]
    
    
24. MOTOMATE (MODELS 6060 & 6260) The Motomate are driving hand controls designed for use by individuals with lower extremity disabilities or spinal cord injury and those with the use of only one hand. Designed to respond to driver commands, the user pushes forward to brake and downward to accelerate. Both of these actions are intended to correspond to the driver’s natural motions. This product features a padded grip and can be mounted to either the right or left side of the steering wheel to suit the user’s need. Model 6260 is ...[More Information]
    
    
25. PEDDLE MASTER The Peddle Master is a hand control for a vehicle's accelerator and brakes designed for use by individuals with mobility and neurological disabilities or lower extremity disabilities or amputation. The controls can be installed in cars, trucks, or vans, and they are intended to allow the user to control the operation of the accelerator and brake pedal in a vehicle with automatic transmission and power brakes. This device can be installed and removed while seated in the driver’s seat without the ...[More Information]
    
    

Page 1 of 2    Next page »