Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Cane Holder

Products are listed alphabetically.

Page 1 of 1

  1. CANE / CRUTCH HOLDER (MODEL 70324) The Cane/Crutch Holder, model 70324, is a spring-loaded clip designed to grip any cane or crutch to a table, desk, or counter. The clip has a foam rubber pad on each side to keep it in place. The holder will accommodate shafts from 5/8-inch to 1-inch in diameter....[More Information]

  2. CANE BLACK LEATHER HOLSTER WITH BELT CLIP Picture of CANE BLACK LEATHER HOLSTER WITH BELT CLIP The Cane Black Leather Holster with Belt Clip is a cane holder designed for use by individuals with walking or balance disabilities who use canes. This closed sleeve cane holder complete with clip accommodates four or six section folding canes. The holder secures the cane to the belt of the user's pants allowing freedom of both hands. DIMENSIONS: The holder is 13.5 inches long....[More Information]

  3. CANE CLAMP Picture of CANE CLAMP The Cane Clamp is a cane holder designed for use by individuals with mobility disabilities. This plastic clamp attaches with the included plastic screw to shelves, the edges of tables and desks, etc. to keep the cane upright and in reach. DIMENSIONS: The clamp attaches to surfaces up to 1 1/8 inch thick and accepts canes up to one inch in diameter....[More Information]

  4. CANE CLIP (MODEL 70327-0007) The Cane Clip, model 70327-0007, is a cane holder with an adhesive pad for attachment to any flat vertical surface. The base also has two screw holes for permanent mounting to the edge of a desk, wall, cabinet, or other surface. The clip will accommodate canes up to 1 inch in diameter. Sold in packages of 6. DIMENSIONS: 2 7/8 x 13/16 inches; projects 1 7/8 inches from the surface....[More Information]

  5. CANE CLIP WITH TABLE CLAMP (MODEL 70325-0001) The Cane Clip with Table Clamp, model 70325-0001, is a cane holder designed to accommodate any size cane securely, while allowing easy release. The device has a spring-action clamp with grooved, soft plastic rollers that will not mar the cane's shaft. The rubber-lined clamp fits onto table tops or counters up to 1.75 inches thick and is secured by a clamping screw with a swivel glide. DIMENSIONS: 3.75 x 3.5 x 2 inches....[More Information]

  6. CANE HOLDER Picture of CANE HOLDER The Cane Holder is designed for use by individuals with mobility disabilities. This device snaps on to the cane shaft and slides over the edge of a table or counter or similar surface, enabling the user to hang the cane within reach. DIMENSIONS: Holds canes up to 7/8-inch in diameter. COLOR: Black or black and white....[More Information]

  7. CANE HOLDER (MODEL 70325-0002) The Cane Holder, model 70325-0002, is a double-clip holder that allows a cane or crutch to be suspended or secured against any tubular structure such as a table leg, walker, commode, wheelchair, or lawn chair. The non-marring, plastic clips have grooved gripping surfaces. DIMENSIONS: 3 x 2 x 1.75 inches....[More Information]

  8. CANE HOLDER (MODEL O113) The Cane Holder, model 0113, is designed to stabilize crutches or canes against a counter or table when not in use. The small unit clips onto the cane/crutch at any height, and the holder rests on the edge of any horizontal surface to balance the cane/crutch by gravity....[More Information]

  9. CANE STAY Picture of CANE STAY Cane Stay is a cane holder designed for use by individuals who use canes. This device fits any standard cane to keep it upright, whether resting on a table edge or leaning gainst a wall. Made of strong plastic, the unit will not slip once attached to the cane. DIMENSIONS (HxLxW): 0.7 x 3 x 4 inches. GUARANTEE: 90-day satisfaction guarantee....[More Information]

  10. CANE VALET The Cane Valet is a cane holder designed to allow canes to be hung from the edge of a desk or table or to be wedged under the edge of a desk or table. This small square device snaps on to the shaft of most canes and a small rubber band placed around the end hooks maintains a secure grip....[More Information]

  11. CAREX ENABLERS CANE HOLDER (MODEL EN13CRD) Picture of CAREX ENABLERS CANE HOLDER (MODEL EN13CRD) The Carex Enablers Cane Holder, model EN13CRD, is a cane holder designed to keep canes upright and within reach. Comprised of an oval base with two gripper fingers, this plastic holder features self-adhesive tape on the back for application where needed. DIMENSIONS (HxDxW): 1.5 x 1.5 x 2.31 inches....[More Information]

  12. CRUTCH AND CANE HOLDER (MODEL 92) The Crutch and Cane Holder, model 92, is designed to mount to the back of a wheelchair. The device features a strap and buckle at the top and a cup attached to the tipping lever to secure the crutches or cane....[More Information]

  13. EASY KLAW Picture of EASY KLAW The Easy Klaw is a cane or crutch holder designed for use by individuals who use canes. This unit turns any flat surface into a convenient support stand. Set the unit on the edge of a flat surface and it sticks in place, ready to hold and the extra-wide opening provides access for larger diameter items, including crutches. The rubberized grip does not slip or scratch. DIMENSIONS (WxDxH): 3.5 x 4 x 1 inch. WEIGHT: 12 ounces....[More Information]

  14. INGRID CANE HOLDER Picture of INGRID CANE HOLDER The Ingrid Cane Holder is a cane holder designed for use by individuals who use canes. Made of Santoprene thermoplastic rubber with a stainless steel spring, this device snaps on to most canes and is equipped with both a hook and a prop to allow the cane to hang from a chair, table, counter, shopping cart, etc....[More Information]

  15. OMHU CANE DOCK Picture of OMHU CANE DOCK The OMHU Cane Dock is a cane holder designed for use by individuals with balance, lower extremity, or walking disabilities who use canes. The user can hang a cane on this wooden knob to store the cane when not in use. It accommodates all OMHU canes. This holder is made of painted birch wood and wall mounting hardware is included. COLOR: Tangerine, grass green, or natural....[More Information]

  16. PARSONS CLIP ON CANE HOLDER (MODEL 14A029) Picture of PARSONS CLIP ON CANE HOLDER (MODEL 14A029) The Parsons Clip On Cane Holder, model 14A029, is a lightweight cane holder designed for use by individuals with walking or balance disabilities who use canes. The cane holder secures the cane to the belt of the user's pants allowing freedom of both hands. The clip has a sturdy steel clip, clear Lexanbacking, and hook and loop webbing. DIMENSIONS: (LxW): 2 x 3 inches....[More Information]

  17. VEHICLE CANE HOLDER Picture of VEHICLE CANE HOLDER The Vehicle Cane Holder is a cane holder designed for use by individuals who have balance, walking, or lower extremity disabilities. This polyester holder attaches to a motor vehicle's front seat headrest with an adjustable strap and hangs down the back of the seat. It has two pockets, one deep and one shallow. The deep pocket can hold a cane, umbrella, or window scraper. The shallow pocket can hold a folded compact umbrella. There is a third pocket designed to catch drips from wet umbrellas. DI...[More Information]

  18. VELCRO STRAPS FOR FOLDING CANES -------- “DO IT YOURSELF” ENTRY ------- PURPOSE: Modify a folding cane or folding crutch so that it stays folded. The Velcro straps are made from sticky back Velcro which can be obtained at any craft, sewing, hardware store, or online. INSTRUCTIONS: The Velcro has two parts to it, the fuzzy end and the spiky rough end. The adhesive back of the rough end will be what to stick to the upper part of the barrel of the cane. For a cane that folds in two, that is a 3 inch circumference, which req...[More Information]

  19. WHEELCHAIR CANE CLIP (MODEL 16C102) Picture of WHEELCHAIR CANE CLIP (MODEL 16C102) The Wheelchair Cane Clip, model 16C102, is a cane holder designed for use by wheelchair or walker users. One side of the clip can be locked onto a wheelchair using the rubber ring system (included), while the other side is plastisol coated to grip canes, reachers, and other similar devices. ...[More Information]

Page 1 of 1

View discontinued Products (12)

AbleData, 103 W. Broad Street, Suite 400, Falls Church, VA 22046. 1-800-227-0216. Se habla español.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by New Editions Consulting under Contract No. ED-OSE-13-C-0064.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor New Editions Consulting has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and New Editions Consulting make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or New Editions Consulting.