Products are listed alphabetically.

Page 1 of 2    Next page »

1. ACROBAT The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra...[More Information]
   
   
2. BASE MATE MODULAR ADAPTIVE SEATING SYSTEM Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks....[More Information]
   
   
3. BENTLEY The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch...[More Information]
   
   
4. BRODA TILT WHEELCHAIR (MODEL 587) The Broda Tilt Wheelchair, model 587, is a tilt-in-space low seat wheelchair designed for indoor use by individuals with lower extremity, mobility, or balance disabilities. The front pivot seat tilt allows for proper positioning of the foot on the floor for propelling the chair while tilted. FRAME (LxW): 51 x seat width plus 10.5 inches. The frame is 16-gauge tubular powder coated steel. Anti-tippers are included. SEAT (LxW): Standard seats are 17 x 16 inches or 17 x 18 inches. Optional seat dim...[More Information]
   
   
5. CHEETAH WHEELCHAIR The Cheetah Wheelchair is a child's manual wheelchair designed for use by children with lower extremity disabilities, mobility disabilities, neurological disabilities, or spinal cord injury. FRAME: Composite frame with transportation tie-downs and anti-tips in a choice of silver, blue, red, or green. SEAT (LxW): Solid seat and back with built-in, step-less adjustment from 10 x 10 inches to 16 x 16 inches. The reclining backrest offers 22 degrees of manual tilt. CUSHION: Black and gray seat and b...[More Information]
   
   
6. COMPASS SPT WHEELCHAIR The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to ...[More Information]
   
   
7. CRUISER READY The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests...[More Information]
   
   
8. FREEDOM SP3 FOLDING TILT Freedom SP3 Folding Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18...[More Information]
   
   
9. GIZMO TILT-IN-SPACE WHEELCHAIR The Gizmo Tilt in Space Wheelchair is a lightweight wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): Cane length of 8 to 13 inches (extra small), 10 to 15 inches (small), 13 to 18 inches (medium), or 15 to 20 inches (long) x 10 to 18 inches wide in one-inch increments. The chair is available in a choice of a folding or rigid frame with optional transport package for bus/van tie-down. The chair has 4...[More Information]
   
   
10. GROWTH GUIDANCE SYSTEMS (GGS) Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt....[More Information]
    
    
11. IMPALA & IMPALA KIT Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up ...[More Information]
    
    
12. INVACARE POWER TIGER WITH ORBIT SEAT The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi...[More Information]
    
    
13. ITILT2 The iTilt2 is a manual reclining tilt in space wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. It has dynamic tilt up to 47 degrees and manual recline up to 30 degrees. FRAME: 16, 18, 20, 22, or 24 inches wide. It has a tension adjustable spring tilt system with dual locking strut, care giver control lever, and tilt angle indicator. The iTilt2 has an adjustable rear axle; 0.5-inch wheel bearings; anti-tippers. SEAT: Adjustable sea...[More Information]
    
    
14. JEWEL MPS WHEELCHAIR The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche...[More Information]
    
    
15. KIDSTER CHAIR The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s...[More Information]
    
    
16. KIMBA PEDIATRIC TILT-IN-SPACE MOBILITY SYSTEM The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated...[More Information]
    
    
17. LIBRE TILT The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi...[More Information]
    
    
18. LUV BASE (MODEL LUV-1) Manual mobility base. Seat pan will accept a variety of seating systems. 14 by 14 inch seat pan has adjustable height of 15.5 to 19.5 inches from the floor. Gas cylinder under pan provides smooth tilt in space adjustament. Tubular steel frame. 12 inch rear wheels, 8 inch front casters. Overall length 34 inches. Overall width 25 inches. Weight of base 35 pounds. Maximum weight of user 180 pounds. Available in six colors....[More Information]
    
    
19. M.A.C. (MULTI-ADJUSTABLE CHAIR) The M.A.C. (Multi-Adjustable Chair) is a tilt-in-space wheelchair designed for use by individuals with mobility disabilities. FRAME: The tubular steel frame collapses for transport. The frame is available in a choice of narrow (14 inches wide), standard (16 inches wide), or wide configurations (19 inches wide), and is offered in a choice of of 10 standard colors; one specialty color and custom colors are available at an extra cost. Push handles are standard. An expandable frame is optional. SEAT...[More Information]
    
    
20. OASIS (KAMELEON) WHEELCHAIR The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit...[More Information]
    
    
21. ORION II The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av...[More Information]
    
    
22. OUTBACK The Outback is a child's manual tilt-in-space wheelchair designed for use by children with mobility or severe physical disabilities. FRAME: Adjustable tilt-in-space frame with built-in growth capability. A one-piece, height-adjustable stroller handle and anti-tippers are included. The frame width adjusts from 11.5 to 15.75 inches and the base length is adjustable. The frame is available in Uluru red, Daintree green, or clear blue. SEAT: The seat depth ranges from 5.9 to 20 inches. The seat heigh...[More Information]
    
    
23. PANTHER The Panther is a child's tilt-in-space wheelchair designed for children with mobility disabilities. FRAME: Polyester-coated steel frame collapses for transport and storage. The frame is available in three sizes and in a choice of bright raspberry, deep blue, or silver. Rear anti-tippers are standard. Size 1 (WxHxL) is 59 x 87 to 111 x 84 centimeters; size 2 is 62 x 87 to 111 x 92; and size 3 is 67 x 87 to 111 x 100 centimeters. SEAT: Solid seat and back with tilt in space and a low shear reclini...[More Information]
    
    
24. PRIMA SI (TANGO) WHEELCHAIR The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b...[More Information]
    
    
25. QUICKIE T45 The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2...[More Information]
    
    

Page 1 of 2    Next page »