Products are listed alphabetically.

Page 1 of 3    Next page »

1. 10-INCH BRAILLE READING PLATFORM (MODEL BRS1) The 10-Inch Braille Reading Platform, model BRS1, is a bookholder designed for use by individuals who are blind or have low vision. This unit is made of acrylic and fits over a Perkins Brailler (see entry), a computer keyboard, or the slate and stylus. It can be used to hold a telephone on top and a brailler beneath. It also fits over braillers with a Brailler Pad and a braille book or worksheet can rest on the platform, which encourages two-handed braille reading. DIMENSIONS: 10 inches high wi...[More Information]
   
   
2. 7.25-INCH BRAILLE READING PLATFORM (MODEL KRS1) The 7.25-Inch Braille Reading Platform, model kRS1, is a bookholder designed for use by individuals who are blind or have low vision. This unit is made of acrylic and fits over a Perkins Brailler (see entry), a computer keyboard, braille notetakers, or the slate and stylus. It can be used to hold a telephone on top and a brailler beneath. A braille book or worksheet can rest on the platform, which encourages two-handed braille reading. DIMENSIONS: 7.25 inches high with a 10 x 20 inch platform. ...[More Information]
   
   
3. ABLE TABLE The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac...[More Information]
   
   
4. ADAPT-A-LAP The Adapt-A-Lap is an angle- and height-adjustable book holder designed for use by individuals with mobility and upper extremity disabilities. This lightweight plastic easel features two moveable straps to hold the reading material in place and a see through filament to hold the pages open. An extendible leg and a base with concave and convex curves provides stability and the easel can rest on the user's upper chest to bring the material closer to those with low vision. This device adapts to a ...[More Information]
   
   
5. ALL PURPOSE TABLE (MODEL F712) The All Purpose Table, model F712, is a bed tray with a tilt top that will fold flat. It has clips for holding books or papers, and a laminated top with a lip at the front edge. DIMENSIONS: 12 x 18 x 17 inches....[More Information]
   
   
6. ATLAS, ATLAS ULTRA, AND ATLAS-LC ERGONOMIC BOOK AND COPY HOLDERS Atlas Ergonomic Book and Copy Holders are bookholders designed for use by individuals with upper extremity disabilities. Available in birch and Trespa (a strong wood product), these units hold books, newspapers, magazines, or individual sheets of paper at a comfortable angle for reading. The Standard Atlas consists of a solid base, a height- and angle-adjustable book support, a shelf, four page stoppers, a spring-loaded clip,and a line guide to hold the place on the page. The Atlas Ultra is also...[More Information]
   
   
7. BETTER BOARD SLANT BOARDS The Better Board Slant Board is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity. It is made of durable corrugated plastic, it has attached plastic clamps that hold paper well and includes non-slip feet to help it stay in place while in use. It has a 20-degree angle and can be used for reading, writing and copying. When not in use, this board folds to a thickness of 0.75 inch for stacking and storing. SIZES: Small and large. ...[More Information]
   
   
8. BIG BEND CLIP The Big Bend Clip is a bookholder, document holder, or switch mounting hardware designed for use by individuals with upper extremity disabilities. This device consists of an adjustable clamp base with an expandable gooseneck-style flexible arm attached to a large alligator clip. This unit can be clamped to the Convert-Able Table (see separate entry), a wheelchair tray, or other flat surface to hold books, toys, photographs, switches, and other items. Using two clips enables larger, heavier items...[More Information]
   
   
9. BOOK MATE ADJUSTABLE (MODEL 73240) The Book Mate Adjustable is a stand with a bookholder designed to hold books or magazines in an open position for patients sitting in bed or in an easy chair. It may also be used in the kitchen for holding recipes or elsewhere for holding musical scores or reference notes for lectures. The stand is made of aluminum tubing with side legs that fold for transport or storage. The attached clear acrylic plastic bookholder is angle adjustable to any angle, height adjustable from 16 to 17.5 inches, and...[More Information]
   
   
10. BOOK READER --- DO IT YOURSELF ENTRY --- PURPOSE: To hold a book open in front of a reader with upper extremity disability or weakness or arthritis and enable the reader to turn the pages. The unit is made of plastic (Lexan). A single sheet, approximately 14 x 20 inches, is heated and bent and non-slip rubber is bonded to the base. The book support shelf is also bonded but can also be screwed in place from the back before bending. Spring loaded clips are mounted to the bottom, which enable the reader to rel...[More Information]
    
    
11. BOOK STAND (MODEL PVC-B) The Book Stand, model PVC-B, is a book holder designed for use by individuals with grasping, upper extremity, or other physical disabilities. The stand can be used on a wheelchair lap tray, stander tray, table top, or when the reader is seated on the floor. It holds most standard-size books, including 3-ring binders. Smaller books can be displayed by placing a cutting board (not included) on the book stand....[More Information]
    
    
12. BOOKEASE READING STANDS Bookease Reading Stands are bookholders designed for use by individuals with upper extremity disabilities or arthritis. Available in mini, classic, or luxury models, these holders accommodate most reading material. Pages are held in place with unobtrusive pegs, which extend outwards for extra-thick books. The wooden unit folds flat when not in use. DIMENSIONS (WxHxD): The mini model is 5 x 5.75 x 0.75 inches. The classic model is 6.333 x 9.5 x 1.25 inches. The luxury model is 9.75 x 12.5 x 1.25 ...[More Information]
    
    
13. BOOKWEDGE The BookWedge is a bookholder and stand for a tablet computer or e-reader designed for use by individuals with upper extremity disabilities, weakness, or arthritis. This triangular pillow supports a book or tablet device on a desk, table, lap, or floor and enables the user to read it hands-free. To use the BookWedge, the user places the spine of a book in the wide ledge on one side of the pillow, and leans the book or tablet against the pillow's side so is it angled upward for reading. DIMENSION...[More Information]
    
    
14. Book Rest ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Easel-like book rest to hold books at a convenient angle for reading. Describes construction of a book rest made of hardboard or plywood, 8 by 10 inches, and hardwood strips for the fiddle on which the book rests. The support is attached with a dowel so it can be made to lie flat against the plywood to carry or store the device. Includes diagram and photographs. COMMENTS: Can be used with page restrainers (000373) to hold paperback books open. SKIL...[More Information]
    
    
15. Book Rest. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Book rest made to the angle preferred by the reader. Provides list of materials needed, instructions and diagram for building a simple book rest of wood. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 86-87. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3460 PAGES (including cover): 3 1985....[More Information]
    
    
16. CANVAS PYRAMID PILLOW The Canvas Pyramid Pillow is a bookholder and a support for tablet computers and e-readers designed for use by individuals with grasping or upper extremity disabilities or arthritis. The pillow can be used on a lap, desk, or floor. It is tapered and topped with a loop, offering a variety of surfaces and storage. One side has a rolled edge at the bottom for propping an iPad, eReader, tablet or book. A screen cleaning cloth is included. The pillow also features pockets on three sides to hold pens,...[More Information]
    
    
17. CLOUD PILLOW The Cloud Pillow is a book holder and support for a tablet computer designed for use by individuals with use of only one hand or upper extremity disabilities. This canvas beanbag cushion is filled with hypoallergenic polyfoam beads and has contoured ribbed shaping to hold print books, e-readers, or tablet computers, while supporting the user's hands. DIMENSIONS (WxDxH): 16 1/8 x 7 x 8 inches. WEIGHT: 0.7 pounds. COLOR: Denim blue....[More Information]
    
    
18. COMFYLAP The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt...[More Information]
    
    
19. DELUXE WOODEN BOOKCHAIR The Deluxe Wooden Bookchair is a bookholder designed for use by individuals with upper extremity disabilities or arthritis. Made of hand-finished rubberwood with a cotton cloth support, the unit adjusts to three different angles and folds flat when not in use. Pages are held in place with unobtrusive pegs, which extend outwards for extra-thick books. SIZES: Mini, medium, standard, and big.DIMENSIONS(WxHxD): The mini model is 5 x 5.75 x 0.75 inches; the medium model is 6.333 x 9.5 x 1.25 inches; ...[More Information]
    
    
20. EASI-READER BOOKSTAND The Easi-Reader Bookstand is an adjustable book holder designed for use by individuals with upper extremity disabilities. The Easi-Reader features three foldable parts that can accommodate a variety of book shapes and sizes. The unit opens wide for large books and magazines, narrow for standard books and magazines, and narrows further for paperbacks. It is made of chrome-plated steel....[More Information]
    
    
21. EASY READER BOOKSTAND The Easy Reader Bookstand is a bookholer for individuals with limited strength and mobility. This bookstand is made of lightweight, durable chrome-plated steel and folds flat for storage and portability. It has adjustable arms that hold everything from paperback books to large magazines and newspapers....[More Information]
    
    
22. EDITOR'S DESK The Editor's Desk is a combination tilt desk and bookholder designed to support books and papers at the appropriate angle for reading while providing an inclined surface for writing. The desk features a shelf for books at the top of the writing surface and a lip to hold papers in place on the writing desk. A groove below the lip holds pens and pencils. OPTIONS: Transparent writing pad. DIMENSIONS(WxDxH): 25 x 23 x 11 inches. COLOR: Natural or dark cherry. GUARANTEE: The manufacturer offers an un...[More Information]
    
    
23. FLIP TOP EASEL Flip top easel has a 45 degree angle with book edge for reading and a reverse 30 degree slant for writing and drawing. Skid resistant base. 18 inches wide by 16 inches high....[More Information]
    
    
24. FOLD-AWAY EASEL The Fold-Away Easel is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity disabilities. The surface of the easel adjusts to 18, 34, or 45 degrees and features a dry-erase writing surface and a pouch for storing papers. The unit has a non-slip foam bottom, folds flat for storage, and is equipped with soft carrying handles. DIMENSIONS: 15.5 x 11.5 inches....[More Information]
    
    
25. FOLDING BOOK AND MAGAZINE STAND The Folding Book and Magazine Stand is a bookholder designed for use by individuals with upper extremity disabilities. This lightweight, stable metal stand can be placed on a table, counter, or over the knees. A long clip can be used to hold pages open, follow text, or mark a place. The unit folds flat for storage. DIMENSIONS: 9 x 12 inches when folded....[More Information]
    
    

Page 1 of 3    Next page »