Products are listed alphabetically.

Page 1 of 4    Next page »

1. 1100 HANDRAIL The 1100 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail angles toward the wall for greater wall protection. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3.75 inches from the wall. All mounting fasteners are included with the handrail. DIMENSIONS (LxH):...[More Information]
   
   
2. 1200 HANDRAIL The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with an ergonomically designed thumb groove. It is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS ...[More Information]
   
   
3. 1255 HANDRAIL The 1255 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It features a 2.5-inch high accent strip available in a selection of colors, patterns, finish options and custom colors. The 1255 is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch and stain resistant rigid vinyl cover. The grip...[More Information]
   
   
4. 130BN BLUENOSE SURFACE MOUNT CORNER GUARD The 130BN BlueNose Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features vinyl retainer which is nearly four times stronger than aluminum retainer, preventing chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. The 130BN is lightweight and comes with top and bottom caps. The angle measures 135 degrees. DIMENSIONS: The wing is 3 inc...[More Information]
   
   
5. 150 SURFACE MOUNT CORNER GUARD The 150 Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features a continuous aluminum retainer that has pre-slotted holes. The guard can also be used to conceal previous dings and scrapes. Top and bottom caps are included with every unit and can be color coordinated. The angle measures 90 degrees. DIMENSIONS: The wing is 3 inches wide on each side. The rigid vinyl cover is 0.080 inch thick, and the co...[More Information]
   
   
6. 160F FLUSH MOUNT CORNER GUARD The 160F Flush Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product offers minimum design interruption by creating a smooth transition from wall to corner. The 160F is mounted on a sturdy 0.070-inch pre-punched continuous aluminum retainer. Mounting fasteners and closure caps are included with the product. DIMENSIONS: The wing is 2 inches wide on each side with a 90-degree corner angle. The scratch and stain resist...[More Information]
   
   
7. 170FR G2 BIOBLEND FIRE RATED CORNER GUARD The 170FR G2 BioBlend Fire Rated Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product meets fire codes with the choice of one- or two-hour fire rating, and offers minimum design interruption by creating a smooth transition from wall to corner. The 0.080-inch non-PVC cover is manufactured with G2 blend Bio-PolyPETG+, which is made with a corn-based biopolymer and recycled content. The 170FR has an easy-wrap cover base aro...[More Information]
   
   
8. 2000 HANDRAIL The 2000 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 2.25 inches in diameter. All mounting fasteners are included with the product. The removable bottom access plate allows the handrail to be fastened to the wall. DIMENSIONS (LxD): 12 feet x 1.25 inches...[More Information]
   
   
9. 2000W HANDRAIL The 2000W Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The 2000W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for returns and corners. The removable bottom access plate allows the handrail to be fastened to the ...[More Information]
   
   
10. 800 HANDRAIL The 800 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail provides protection for a wall and support for users. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxH): 12 feet...[More Information]
    
    
11. 800W WOODLAND FAUX WOOD HANDRAIL The 800W Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum container, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. The 800W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for...[More Information]
    
    
12. 855 HANDRAIL The 855 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail features a 3.19-inch high wayfinding accent strip available in a selection of colors and patterns. It is mounted on a 0.08-inch thick, continuous aluminum retainer, and it is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included w...[More Information]
    
    
13. 900 HANDRAIL The 900 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a scratch and stain resistant, 0.080-inch thick vinyl cover. The 900 has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.5 inches. COLOR: Available in a variety of colors and...[More Information]
    
    
14. A*COM SYSTEM The A*Com System is a modular ramp system designed to provide wheelchair access to dwellings and other structures. The system includes ramps, steps, and platforms. The system is customizable and can be reconfigured and/or relocated. The platform and steps come with a guardrail, plus an additional grasping rail for the steps. Steps come in flights of three to eight individual steps. DIMENSIONS (LxW): Platforms are 64 x 64 or 60 x 48 inches, with a 42-inch guardrail. Ramps are 60 x 48, 72 x 48, 96...[More Information]
    
    
15. A.B.E. END DRAIN WHEELCHAIR ACCESS SHOWER PAN (MODEL BF-6030) The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam...[More Information]
    
    
16. ACCESSIBLE LIVING COLLECTION - ACCESSIBLE CABINETS The Accessible Living Collection - Accessible Cabinets are accessible kitchen components designed for use by wheelchair users. These base cabinets for the kitchen feature countertops low enough to be accessible to wheelchair users, toe kicks allowing for wheelchair access, and wheelchair reachable storage options. Cabinets in the collection include an Accessible Tambour Base Cabinet, an Accessible Base Lazy Susan, an Accessible Base Cabinet with Pullout Table, an Accessible Dishwasher Base Cabin...[More Information]
    
    
17. ADA STAINLESS STEEL SINK (MODEL PSE-2020) The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch...[More Information]
    
    
18. ADJUSTABLE HEIGHT CLAMP ON TUB RAIL (MODEL 70889) The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted....[More Information]
    
    
19. ALUMILITE FOLDING CURB RAMP The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60...[More Information]
    
    
20. ALUMILITE SOLID CURB RAMP The Alumilite Solid Curb Ramp is a curb ramp designed to provide access over curbs or steps for wheelchair users. The ramp features welded aluminum construction with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. The ramp can be used as a short fixed ramp or for temporary purposes. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 30 or 36 inches. WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 600 pounds....[More Information]
    
    
21. AMERIGLIDE BATTERY POWERED STAIR LIFT The AmeriGlide Battery Powered Stair Lift is an interior stair lift designed for use by individuals with arthritis or mobility, lower extremity, or walking disabilities. The padded seat has vinyl upholstery, a movable footrest, and a curved backrest, and it swivels 180 degrees to allow the user to get on and off at top and bottom landings. The lift moves on nylon wheels. It has 24-volt Class 2 grounded controls and can be installed in left or right side orientation. Safety features includes sens...[More Information]
    
    
22. AMERIGLIDE ELECTRIC POWERED STAIRLIFT The Ameriglide Electric Powered Stairlift is an interior stair lift designed for use by individuals with mobility or lower extremity disabilities or arthritis. The lift has a movable footrest, a curved backrest, and a padded seat. The seat swivels 180 degrees to facilitate getting on and off at top and bottom landings. When seated, the user pushes a control button and the seat rides smoothly on nylon wheels. The lift has 24-volt Class 2 grounded controls throughout. Safety features include footr...[More Information]
    
    
23. AMERIGLIDE ELITE RESIDENTIAL ELEVATOR The AmeriGlide Elite Residential Elevator is a home elevator designed for use by wheelchair users or individuals with mobility or lower extremity disabilities or arthritis. The elevator can be installed in a multi-level home or public or commercial building that serves disabled or elderly individuals, such as a school, church, apartment complex, or senior citizen center. It has a rigid guide rail system; a traction sheave drive system with counterweights for energy-efficient operation; self-clos...[More Information]
    
    
24. AMERIGLIDE HEAVY DUTY STAIR LIFT The AmeriGlide Heavy Duty Stair Lift is an interior seat lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This stair lift has a large, contoured seat with ajustable armrests and footrests, a contoured high-backed backrest, a padded seat, and vinyl upholstery. The lift runs smoothly on nylon wheels with a half-horsepower 90-volt direct current (DC) motor. It fits on staircases 36 inches or wider, and can be oriented to the right or left. T...[More Information]
    
    
25. ARMADA MODULAR RAMP SYSTEM The Armada Modular Ramp System is a modular ramp designed to provide access for wheelchairs and scooters. The system includes ramps, platforms, support legs, and handrails. The system's universal platform design allows for virtually any configuration. Curbs and handrails can be positioned on any side. Components are made from anodized aluminum with heavy-duty welded construction. The bi-directional knurled tread forms a rugged skid-resistant surface that cannot wear off or peel. Height and slope...[More Information]
    
    

Page 1 of 4    Next page »