Products are listed alphabetically.

Page 1 of 3    Next page »

1. ADJUSTABLE GRIP ASSIST (MODEL 71406) The Adjustable Grip Assist, model 71406, is a grab bar designed for use to provide balance assistance in the shower or bathtub. This grip has two pivoting handles that swivel to allow positioning for different needs. The grip can be installed and removed by flipping tabs. DIMENSIONS: Handles are 15 inches long....[More Information]
   
   
2. ADJUSTABLE HEIGHT CLAMP ON TUB RAIL (MODEL 70889) The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted....[More Information]
   
   
3. ASSIST SUCTION TUB BAR The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l...[More Information]
   
   
4. ASSISTIVE TUB BAR The Assistive Tub Bar is a bathtub or shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. To install, the bar is positioned vertically, horizontally, or diagonally on the tub or shower wall, then tabs on the bar are flipped down to engage dual suction cups. Releasing the flip-tabs allows the bar to be removed. The bar is made from ABS plastic and rubber. DIMENSIONS (LxW): 16 x 3.5 inches. CAPACITY: 300 pounds....[More Information]
   
   
5. BATH+SAFE DELUXE TUB SAFETY RAIL (MODEL F72716-4000) The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick....[More Information]
   
   
6. BATHTUB GRAB BAR The Bathtub Grab Bar is a grab bar for bathtub designed for use by individuals with balance and mobility disabilities. This U-shaped bar features a wide clamp base that fits over the edge of the tub. A screw clamp adjusts the width for a secure fit. DIMENSIONS: The unit fits tub walls 3 to 7 inches thick. The bar is 19.5 inches tall and extends 14.75 inches above the tub. The width adjusts from 8 to 11.5 inches....[More Information]
   
   
7. BATHTUB RAIL WITH CHROME FINISH The Bathtub Rail with Chrome Finish is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with support while moving into or out of the bathtub. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 7 x 0.75 x 11 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish....[More Information]
   
   
8. BATHTUB SAFETY RAILS (MODELS 1240, 1250, 1255, 1260, & 1265) Bathtub Safety Rails are bathtub grab bars designed for use by individuals with balance or mobility disabilities. Made from powder-coated steel (models 1250 and 1255), plastic (models 1260 and 1265), or a composite material (model 1240), these rails provide added stability when getting in and out of the bathtub. Models 1240, 1250, 1255, and 1260 have two grip handles, including a lower one that allows for a seated grip position. Model 1265 has one grip handle. The rails attach to the tub sides w...[More Information]
   
   
9. BATHTUB SAFETY RAILS (MODELS H100, H200, H250 & H300) The Bathtub Safety Rails are grab bars for bathtubs designed to provide stability for individuals with physical or neurological disabilities while bathing or transferring. Model H100 is made of steel with a white polyester coating. Models H200, H250 and H300 are made of chrome-plated steel. The mounts are coated with soft plastic brushing. DIMENSIONS: Model H100 - 5.74 x 14.75 inches; Model H200 - 11.75 x 11 inches; Model H250 - 16 x 14.75 inches; Model 300 - 18 x 6 inches. WEIGHT: Model H100 - ...[More Information]
   
   
10. BI-LEVEL TUB GRAB BAR The Bi-Level Tub Grab Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Ergonomically designed to encourage a proper grasp while entering or exiting the tub, this heavy-gauge welded steel bi-level bar clamps to the tub using a stainless steel locking mechanism and rubber pads. The unit can be installed without tools for temporary or permanent use. DIMENSIONS: The bar extends 14.75 inches above the tub and adjusts to fit tubs from 3 to 7 inch...[More Information]
    
    
11. BRIDGE MEDICAL PIVOT GRIP TELESCOPING PORTABLE GRAB BAR (MODELS BC400M & BC400L) The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model ...[More Information]
    
    
12. BRIDGE MEDICAL TELESCOPING PORTABLE GRAB BAR (MODEL BC400M) The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati...[More Information]
    
    
13. BRIDGE-MEDICAL SINGLE GRIP PORTABLE GRAB BAR (MODEL BC-201) The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds....[More Information]
    
    
14. COMBINATION AID RAIL (MODEL 1632) The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st...[More Information]
    
    
15. CORNER MOUNTED TUB RAIL (MODEL 3236-C) The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32 ...[More Information]
    
    
16. DEPENDA-BAR The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat...[More Information]
    
    
17. DUAL LEVEL BATHTUB RAIL The Dual Level Bathtub Rail is a grab bar for the bathtub designed for use by for individuals with mobility disabilities. The rail provides the individual with a high/low grip support, including a straight crossbar, for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the side of the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 16 x 1 x 12 inches. The clamp adjusts from 3.5 to...[More Information]
    
    
18. ECONOMY TUB RAIL The Economy Tub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities. The bar is made of chrome-plated steel with rubber pads on all tub contact points. Knurling around grab bar diameter provides a permanent no-slip grip. DIMENSIONS: 8 x 11 or 7 x 17 inches. WARRANTY: Limited lifetime warranty....[More Information]
    
    
19. ERGOBAR The Ergobar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This all-acrylic grab bar is made of 100 percent industrial-grade acrylic and it comes in a variety of standard or custom shapes and sizes. COLORS: Available in the same shades as the acrylic sheets used by bathtub manufacturers, or in custom colors....[More Information]
    
    
20. ESSENTIAL BATH SAFETY PLUS BATHTUB SAFETY BAR (MODEL B3200) The Essential Bath Safety Plus Bathtub Safety Bar, model B3200, is a grab bar for bathtub designed for use by individuals with arthritis or balance or lower extremity disabilities. Made of enamel-coated steel, this rounded A-shaped bar offers two levels of support. A rubber-padded clamp adjusts to secure the bar to tub walls. DIMENSIONS: The steel bar is one-inch in diameter and the clamp fits tub walls 3 to 7 inches wide....[More Information]
    
    
21. FLOOR MOUNTED TUB RAIL (MODEL 3236) The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch ...[More Information]
    
    
22. HAMPSHIRE CONTOURED TAP RAIL (MODEL 09-107-8534) The Hampshire Contoured Tap Rail, model 09-107-8534, is a bathtub grab bar designed for use by individuals who need support rising from or sitting down in a bathtub. The plastic rail is fixed to taps by means of a clamping bar. Its contoured plastic moldings enhance the user's grip on the rail when raising and lowering. In use, the rail rests on the edges of the tub; the unit may be folded up against the wall when not in use. DIMENSIONS: Max diameter of taps 80mm (31/8"). Distance of bar from ta...[More Information]
    
    
23. HANDI-GRIP PORTABLE GRAB BARS Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and...[More Information]
    
    
24. HEAVY DUTY BATHTUB SAFETY RAIL (MODEL 69603A) The Heavy Duty Bathtub Rail, model 69603A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity or mobility disability disabilities. Made of heavy-gauge, powder-coated steel, the grab bar provides two gripping surfaces to facilitate both entry and exit from tub. It attaches to a tub with extra-large suction cups. DIMENSIONS: Fits tubs with walls 3 to 7.25 inches thick. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Lifetime limited warranty....[More Information]
    
    
25. HEAVY-DUTY SAFETY TUB BAR (MODEL 1609) The Heavy-Duty Safety Tub Bar, model 1609, is a grab bar for bathtub designed to assist those who need extra support when using the tub. The bar is chrome-plated and has vinyl sleeves to prevent marring. A unique Lok-Fit design assures support. DIMENSIONS: 18 x 17 inches, bracket adjusts 4 to 7 1/2 inch width....[More Information]
    
    

Page 1 of 3    Next page »