Products are listed alphabetically.

« Previous page    Page 2 of 3    Next page »

26. GRAB BARS (MODELS 72470) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Ribbed plastic grab bar tubes, diameter 1 1/4 inches. Wall flanges, elbows, joint plugs. Yellow, green or brown reinforced plastic. See catalog for specific measuring and ordering instructions....[More Information]
    
    
27. GRAB BARS (MODELS LB4107, LB4108, & LB4109) --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- Grab bars mount to walls. Variety of sizes and styles including straight 16 inches and 32 inches long, and 90 degree angled bar 25 inches by 20 inches....[More Information]
    
    
28. GRAB BARS WALL MOUNTED --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Grab bars, 7/8 inch stainless steel tube; chrome plated brackets. Maximum load over 300 pounds. Straight bars: 9, 12, 16, 24, 32, 40 or 48 inches. L shaped bars: 16 by 16 inches, 16 by 24 inches, 16 by 32 inches, or 24 by 24 inches....[More Information]
    
    
29. GRABRAIL, TWO WALL ANGLED GRABRAIL, ONE WALL 90 DEGREE ANGLED GRABRAIL, ONE WALL 45 DEGREE ANGLED GRABRAIL --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Tubular grabrail bolted to wall. Available in lengths from 11.81 to 39. 37 inches. Two wall grabrail is L shaped on one wall, vertical rail wraps around the corner. Height 31.9 inches, base of L 19.69 inches, length 25.6 inches. Ninety degree angled grabrail, height 31.5 inches, length 19.69. Forty five degree angled grabrail, horizontal length 17.3 inches, angled length 12.6 inches. Angled rails in right and left styles....[More Information]
    
    
30. HAND RAIL GRAB BAR (SERIES 8000) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Grab bars and corridor rails. Single structural units mount directly to wall. 18 gauge 304 stainless steel tubing with concealed mounting. 1 1/ 2 inches wall clearance....[More Information]
    
    
31. HEAVY DUTY GRAB BARS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Stainless steel heavy duty grab bars. Straight: 16, 18, 24, 32 inches long. Angled: 45 degrees left or right, or 97 degrees or 120 degrees. Various angled and straight bars for walls around bathtub or shower. Wall mounted and wall to floor rails for toilet. Custom modifications available. All bars have 1 1/2 inch outer diameter with 1 1/2 inch wall clearance. Exposed or concealed mounting available. Choice of knurled gripping surface or p...[More Information]
    
    
32. HOMECARE GRAB BARS --- DISCONTINUED. (Verified 4/2007) RETAINED IN DATABASE FOR REFERENCE PURPOSES. --- The Homecare Grab Bars are wall grab bars designed to provide stability for individuals with physical and neurological disabilities while showering, bathing, and transferring. These bars are available in a choice of polyester-coated or chrome-plated steel in straight or right- or left-angle L-shaped configurations. DIMENSIONS: The straight bars are available in 12-, 16-, 18-, 24- and 32-inch lengths. The right- ...[More Information]
    
    
33. INSIDE CORNER GRAB BAR. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Inside corner grab bar. Chrome plated 7/8 inch diameter brass tubing with post at angle. 16 by 32 inches....[More Information]
    
    
34. KNURLED GRAB BAR (MODEL B1 4) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Grab bar with non skid finish. Length 16 inches....[More Information]
    
    
35. LINDIO ANGLED GRABRAIL --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Lindio Angled Grabrail is a wall grab bar designed for use by individuals with mobility disabilities. This grab bar features a crooked J shape to provide horizontal and vertical assistance and an Ergogrip flange design which enables the hand and wrist to grasp the rail in a natural position while providing a generous space between the wall and the rail to prevent hand and finger entrapment. COLOR: White, blue, black...[More Information]
    
    
36. LINDIO SHOWER RAIL --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Lindio Shower Rail is a wall grab bar for shower designed for use by individuals with mobility disabilities. This grab bar features Ergogrip flange design which enables the hand and wrist to grasp the rail in a natural position while providing a generous space between the wall and the rail to prevent hand and finger entrapment. This grab bar is fitted with a horizontal rail and a vertical rail which includes a heigh...[More Information]
    
    
37. NATURAL GRIP GRAB BARS --- DISCONTINUED. (Verified 04/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Natural Grip Grab Bars are wall grab bars designed for use by individuals with balance, lower extremity or mobility disabilities, arthritis, or spinal cord injury. These plastic bars are reinforced with a stainless steel tubular core and feature an ergonomically designed grip to provide the best possible shape to fit the user’s hand. Integrally installed flange covers ensure no metal connections are exposed and a ch...[More Information]
    
    
38. NINETY DEGREE GRAB BAR (MODEL B1 5), 32 INCH STRAIGHT GRAB BAR (MODEL B1 9), & 16 INCH GRAB BAR (MODEL B1 10) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Chrome plated steel 1.25 inch diameter grab bars with high impact plastic mounting brackets. 4.25 inches wall clearance. Angled grab bar has 25 inches vertical, 20 inches horizontal support....[More Information]
    
    
39. OVAL SHAPED GRAB BARS --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Oval Shaped Grab Bars are wall grab bars designed for use by individuals with mobility disabilities. The 18-gauge steel bars have a texture-coated oval shape to provide a secure grip. A right-angle and a left-angle model are also available. Screws and screw covers are included. DIMENSIONS: The standard oval bars are avaialble in 16, 18, 24, and 32 inches long. The right- and left-angle bars are 16 x 32 inches. The f...[More Information]
    
    
40. PILGRIM SERIES GRAB BARS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Brass grab bar for wall. Straight: 16, 24 or 32 inches long. Maximum load 300 pounds. Angled: 16 by 32 inches. Smooth finish. S, L, or T type concealed mounts available....[More Information]
    
    
41. PINNACLE FLOOR TO WALL RAIL, CREST FOLD DOWN RAIL, AND SUMMIT LOOPED FOLD DOWN RAILS --- DISCONTINUED. (Verified 3/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Pinnacle Floor to Wall Rail, the Crest Fold Down Rail, and the Summit Looped Fold Down Rail are wall grab bars designed to provide security during transfers to and from toilets, during showers, and wherever extra stability is required. The Pinnacle and the Crest are single bars which are attached to wall mounting plates, and the Summit is a U-shaped bar with both ends attached to the mounting plate. All models extend...[More Information]
    
    
42. PORTA BAR --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Porta Bar is a wall grab bar designed to give support in the shower and bathtub for individuals who have difficulty standing. The bar attaches to the wall with screw plates, or attaches to the sides of a door with clamp on brackets. It contains stainless steel and ABS plastic, and expands to 36 inches. The bar comes with a carrying case....[More Information]
    
    
43. PRESSALIT HAND RAILS --- DISCONTINUED. (Verified 7/95) RETAINED IN DATABASE FOR REFERENCE. --- The Pressalit Hand Rails are grab bars designed to assist individuals when walking, standing, sitting, or transferring. This hand rail system consists of 13 different components which can be combined to make custom lengths and shapes. These rails of PVC plastic may be used for the bathroom, on staircases, and in corridors. COLOR: White, brown, blue, red, green, and yellow....[More Information]
    
    
44. S SHAPED GRAB BAR (MODEL 21183) --- DISCONTINUED. (verified 1/96) RETAINED IN DATABASE FOR REFERENCE. --- Grab bar for wall, S-shape vertically mounted. One inch diameter, anodized aluminum, 4 inch wall clearance. Twenty four inches long, 10 inches wide....[More Information]
    
    
45. SAFETEK HANDICAPPED CODE PACKAGE SAFETY SUPPORT ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Handicapped Code Package Safety Support Bars are wall-mounted grab bars for use in public restrooms. Each package includes 2 safety support bars with center support mountings and a texured surface to reduce slippage, a handicap decal, and 6 back plates. The bars are made of thermoplastic, a non-conducive, non-porous material that is bacteria and mildew growth resistant. DIMENSIONS: Rails are 1.5 inches in diam...[More Information]
    
    
46. SAFETEK SAFETY SUPPORT ANGLE BARS ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Safety Support Angle Bars are wall-mounted grab bars designed to provide horizontal and vertical support to persons who may need assistance with balance while walking, getting into or out of the bath/shower, and sitting or standing from the toilet. The bars are "L"-shaped with three mounting points and have a textured surface to reduce slippage. The units are made of thermoplastic, a non-conductive, non-porous...[More Information]
    
    
47. SAFETEK SAFETY SUPPORT CORNER BARS ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Safety Support Corner Bars are wall mounted grab bars designed for horizontal installation at wall intersections. The units are available with or without vertical arms, and all bars have a textured surface to reduce slippage. The bars are made of thermoplastic, a non-conducive, non-porous material that is mildew growth and bacteria resistant. Fastening hardware for wood is included, but suitable wall blocking ...[More Information]
    
    
48. SAFETEK SAFETY SUPPORT STRAIGHT BAR ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Safety Support Straight Bars are wall grab bars designed to provide a secure handhold for better balance while walking, getting in or out of the tub or shower, or using the toilet. The bars are made of thermoplastic, a non-conductive and non-porous material that is bacteria and mildew growth resistant. This material is designed not to rust or oxidize. They have a textured surface to reduce slipping. The bars c...[More Information]
    
    
49. SAFETEK SAFETY SUPPORT TOWEL BAR KIT (MODELS 11051 & 11151) ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Safety Support Towel Bars are wall grab bars designed to provide a secure handhold for better balance for individuals who are physically disabled. The bars are made of thermoplastic, a non-conductive and non-porous material that is bacteria and mildew growth resistant. This material is designed not to rust or oxidize. They have a textured surface to reduce slipping. The kit comes with one Safety Towel Bar, one...[More Information]
    
    
50. SAFETEK SAFETY SUPPORT WRAP-AROUND SHOWER BARS ---DISCONTINUED. (Verified 11/2000) RETAINED IN DATABASE FOR REFERENCE. ---The SafeTek Safety Support Wrap-Around Shower Bar is a wall-mounted grab bar designed to provide support on all three sides of the shower stall. The unit is made of thermoplastic, a non-conducive, non-porous material that is mildew growth and bacteria resistant. The bar has a textured surface to reduce slippage. Fastening hardware for wood and center supports are included. Suitable wall blocking is required for installati...[More Information]
    
    

« Previous page    Page 2 of 3    Next page »