Products are listed alphabetically.

« Previous page    Page 2 of 2

26. MOEN SUCTION BALANCE ASSIST BAR The Moen Suction Balance Assist Bar is a wall grab bar designed for use by individuals with balance disabilities. This portable bar has a non-slip grip and attaches to smooth, flat surfaces with the large suction cup at each end. Locking mechanisms secure the bar to the wall once placed with the suction cups. Releasing the locks releases the bar from the wall. DIMENSIONS: 12 inches long. COLOR: Cool white. ...[More Information]
    
    
27. MULTI-LEVEL HAND GRIP (MODEL F72481) The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248...[More Information]
    
    
28. OFF-THE-POT Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in...[More Information]
    
    
29. PONTE GIULIO TRENDY GRAB BAR The Ponte Giulio Trendy Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These aluminum bars have a non-slip ABS plastic coating that gives the bar the appearance of wenge wood. The concealed mounting flange has an eleven-hole design for a variety of mounting options. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 16, 18,24, or 36 inches long. These bars are 1.25 inches in diameter and the d...[More Information]
    
    
30. SUCTION GRAB BAR, ADJUSTABLE LENGTH The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release leve...[More Information]
    
    
31. SUCTION GRAB BAR, FIXED LENGTH The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups ...[More Information]
    
    
32. SUCTION TUB GRAB BAR (MODELS 1255A, 1255B, & 1255C) The Suction Tub Grab Bar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The adjustable length bar attaches with suction. SIZES: Small (model 1255A), medium (model 1255B), or large (model 1255C). DIMENSIONS: Length is 17.25 to 22.25 inches (small), 22 to 27 inches (medium), or 26 to 30.75 (large). CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three-year warranty on the grab bar, one-year warranty on the suction cups....[More Information]
    
    
33. TUB / SHOWER BAR (MODEL 3636-V) The Tub/Shower Bar ##3636-V is a stainless steel wall mounted grab bar for showers and bathtubs. The support consists of an L-shaped horizontal bar that provides a grab surface on the back and side walls, and a connected vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 36 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Sati...[More Information]
    
    
34. TWO WALL GRAB BAR Stainless steel corner grab bar. Concealed or exposed mountings. 1, 1 1/ 4 or 1 1/2 inch diameter. 1 1/2 inch wall clearance. Satin finish or peened non slip finish. 24 by 36 inches, 24 by 24 inches, or 36 by 48 inches....[More Information]
    
    
35. TWO WAY TUB BAR Stainless steel corner grab bar with 90 degree end extension. 48 inches by 20 inches by 32 inches high. Specify right or left. Concealed or exposed mountings. 1 inch, 1 1/4 or 1 1/2 inch diameter. 1 1/2 inch wall clearance. Satin finish or peened non slip finish....[More Information]
    
    
36. WALL BRAB BAR FOR BATH TUB (MODEL 3100K SERIES TYPE 17) Stainless steel, wall mounted grab bars on 2 walls. On one wall, a horizontal bar 48 inches long continuing around adjoining wall with bar 24 inches long and vertical section 32 inches high. Mounted 32 inches above floor. 1 1/2 inches wall clearance. Peened finish for better grip, available in left or right models....[More Information]
    
    
37. WALL MOUNTED TUB RAIL (MODEL 2040) The Wall Mounted Tub Rail ##2040 is a stainless steel grab bar for use in bathtubs. The support consists of an L-shaped bar designed for mounting in the corner of the walls of the tub area. This rail is available in 4 concealed and 4 exposed mounting styles, and can be mounted for either right or left handed use. DIMENSIONS: 36 x 48 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety clearance is 1.5 inches. FINISH: Standard finish is Brushed Satin; optional finishes include non-slip safety...[More Information]
    
    
38. WALL SUSPENDED TUB RAIL (MODEL 1236) The Wall Suspended Tub Rail ##1236 is a stainless steel wall mounted grab bar for bathtubs. The support consists of a U-shaped bar with 2 mounting points, and 2 L-shaped extension arms that are attached to the underside of the hand bar and mount to the wall. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 36, 40, 42, or 48 inch crosspieces; hand bar extends from wall 12 inches; extension arms are 8 x 12 inches. FINISH: Brushed Satin is standard; optional finis...[More Information]
    
    
39. WAVEGRIP GRAB RAIL SYSTEM Wavegrip Grab Rails are wall grab bars for installation in bathrooms and other areas where additional support is needed for persons with disabilities, children, or seniors. The grab bars are available in straight or bent (45- or 90-degrees) models. The bars feature a continuous "wave" pattern ergonomically designed to fit the contours of the hand. The tubing is made of aluminum and plastics that are permanently bonded to one another and finished with a polyamide surface finish. All parts are eas...[More Information]
    
    
40. WAVEGRIP GRIP PIECES The Wavegrip Grip Pieces are wall grab bars for use in bathrooms around the toilet, in the tub or shower, or in other areas where secure support may be needed for persons with disabilities, seniors, or children. The grip pieces are modular units that may be combined to fit any room, including interior and exterior corners. Different configurations and lengths of handrails may be designed with two models: straight pieces for extension, and open-ended pieces with one wall mount. The tubing feature...[More Information]
    
    

« Previous page    Page 2 of 2